Commit graph

693,635 commits

Author SHA1 Message Date
Alexander Duyck
b1bb2eb0a0 igb: Re-add support for build_skb in igb
This reverts commit f9d40f6a99 ("igb: Revert support for build_skb in
igb") and adds a few changes to update it to work with the latest version
of igb. We are now able to revert the removal of this due to the fact
that with the recent changes to the page count and the use of
DMA_ATTR_SKIP_CPU_SYNC we can make the pages writable so we should not be
invalidating the additional data added when we call build_skb.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
e014272672 igb: Break out Rx buffer page management
At this point we have 2 to 3 paths that can be taken depending on what Rx
modes are enabled.  In order to better support that and improve the
maintainability I am breaking out the common bits from those paths and
making them into their own functions.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
e3cdf68d4a igb: Add support for padding packet
With the size of the frame limited we can now write to an offset within the
buffer instead of having to write at the very start of the buffer.  The
advantage to this is that it allows us to leave padding room for things
like supporting XDP in the future.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
8649aaef40 igb: Add support for using order 1 pages to receive large frames
This patch adds support for using 3K buffers in order 1 pages the same way
we were using 2K buffers in 4K pages.  We are reserving 1K of room for now
to have space available for future headroom and tailroom when we enable
build_skb support.

One side effect of this patch is that we can end up using a larger buffer
if jumbo frames is enabled.  The impact shouldn't be too great, but it
could hurt small packet performance for UDP workloads if jumbo frames is
enabled as the truesize of frames will be larger.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
e08912985b igb: Add support for ethtool private flag to allow use of legacy Rx
Since there are potential drawbacks to the new Rx allocation approach I
thought it best to add a "chicken bit" so that we can turn the feature off
if in the event that a problem is found.

It also provides a means of validating the legacy Rx path in the event that
we are forced to fall back.  At some point in the future when we are
convinced we don't need it anymore we might be able to drop the legacy-rx
flag.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
3456fd5342 igb: Use page_address offset from page instead of masking virtual address
Update the handling of page addresses so that we always refer to them using
a void pointer, and try to use the consistent name of va indicating we are
working with a virtual address.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
cb0ef1d1dc igb: Only sync size of expected frame in ethtool testing
We only need to sync the size of the frame that is read to test.  We don't
need to sync the entire Rx buffer.  This way the testing is more consistent
with how we handle things in the receive path.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
cfbc871c21 igb: Limit maximum frame Rx based on MTU
In order to support the use of build_skb going forward it will be necessary
to place a maximum limit on the amount of data we can receive when jumbo
frames is not enabled.  In order to do this I am adding a new upper limit
for receive based on the size of a 2K buffer minus padding.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
7cc6fd4c60 igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring
In the case of the Tx rings we need to only clear the Tx buffer_info when
we are resetting the rings.  Ideally we do this when we configure the ring
to bring it back up instead of when we are taking it down in order to avoid
dirtying pages we don't need to.

In addition we don't need to clear the Tx descriptor ring since we will
fully repopulate it when we begin transmitting frames and next_to_watch can
be cleared to prevent the ring from being cleaned beyond that point instead
of needing to touch anything in the Tx descriptor ring.

Finally with these changes we can avoid having to reset the skb member of
the Tx buffer_info structure in the cleanup path since the skb will always
be associated with the first buffer which has next_to_watch set.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
d2bead576e igb: Clear Rx buffer_info in configure instead of clean
This change makes it so that instead of going through the entire ring on Rx
cleanup we only go through the region that was designated to be cleaned up
and stop when we reach the region where new allocations should start.

In addition we can avoid having to perform a memset on the Rx buffer_info
structures until we are about to start using the ring again.  By deferring
this we can avoid dirtying the cache any more than we have to which can
help to improve the time needed to bring the interface down and then back
up again in a reset or suspend/resume cycle.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
7ec0116c91 igb: Use length to determine if descriptor is done
This change makes it so that we use the length of the packet instead of the
DD status bit to determine if a new descriptor is ready to be processed.
The obvious advantage is that it cuts down on reads as we don't really even
need the DD bit if going from a 0 to a non-zero value on size is enough to
inform us that the packet has been completed.

In addition I have updated the code so that we only reset the Rx descriptor
length for descriptor zero when resetting a ring instead of having to do a
memset with 0 over the entire ring.  By doing this we can save some time on
initialization.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:44 -07:00
Alexander Duyck
7bd1759282 igb: Add support for DMA_ATTR_WEAK_ORDERING
Since we are already using DMA attributes in igb for Rx there is no reason
why we can't also apply DMA_ATTR_WEAK_ORDERING which is needed on some
platforms to improve performance.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-17 12:11:43 -07:00
Tamara Diaconita
d771495274 Documentation: md: md-cluster.txt: Fix typos
Fix typos in md-cluster.txt file to make documentation clear.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:08:51 -06:00
Tamara Diaconita
8035223cb0 Documentation: mmc: mmc-dev-attrs.txt: Fix typos
Fix typos in mmc-dev-attrs.txt to make documentation clear.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:07:41 -06:00
Tamara Diaconita
eb790aee17 Documentaion: leds: leds-lp55xx.txt: Fix typos
Fix spelling mistakes in leds-lp55xx.txt file to make documentation
clear.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:06:14 -06:00
Tamara Diaconita
ce8cd407cc Documentation: vfio-mediated-device.txt: Fix typos
Correct spelling mistakes in vfio-mediates-device.txt to make
documentation clear.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:04:53 -06:00
Tamara Diaconita
7bc41a655d Documentation: sync_file.txt: Fix typos
Fix spelling mistakes in sync_file.txt to make documentation clear.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:03:36 -06:00
Hans Holmberg
f8998c2265 lib/Kconfig.debug: correct documentation paths
A bunch of documentation files have moved, correct the paths.

Signed-off-by: Hans Holmberg <hans@pixelmunchies.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:01:42 -06:00
Tamara Diaconita
f4baccdea5 Documentation: acpi: Fix typos
Fix typos in acpi directory to make documentation grammatically correct.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-17 13:00:41 -06:00
Daniel Drake
822f5845f7 efi/esrt: Cleanup bad memory map log messages
The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:

   efi: requested map not found.
   esrt: ESRT header is not in the memory map.

Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.

Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.

Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-03-17 18:53:12 +00:00
Evan Quan
cf8c73afb3 drm/amd/amdgpu: add POLARIS12 PCI ID
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2017-03-17 14:44:34 -04:00
Linus Torvalds
f89406ca1f xen: fix for 4.11 rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJYy4bXAAoJELDendYovxMvVPwIAJWsWFoPEb/3sUt/0oYtFiq3
 NXj8kHTm8GIn73PSbVQe9V8aoqRO+1+AjveoBz47M10Aro/NfgccGFgWBrhTwYst
 S5axq4AySGEnUNnSyxxpaBgijBeXnX3jeZ/SJ0EgINy73CV3FjsqWrQrKv6Mt2Hg
 6Vwo/ebAxs/FPJQIj7kLsSrWCJvav5145HrzYSEO29JXc6zOSgXZQkLOmdOck2He
 Kw8XbYgTqDOlLuf3KwzpXJM8bDwird6U7orgfFyMDRyDDOfvKAm3oQpuW8styPL/
 NNNOX5sVTqNPktLXVf2Y+W8rlxGCqQEZbCuZYLWbYmrWcv02cD+IGs/Npwg0s00=
 =zuJx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
 "A minor fix for using the appropriate refcount_t instead of atomic_t"

* tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drivers, xen: convert grant_map.users from atomic_t to refcount_t
2017-03-17 11:25:46 -07:00
Philipp Zabel
d5b72a2123 dma-fence: add dma_fence_match_context helper
Add a helper to check if all fences in a fence array are from a given
context. For convenience, the function can also handle being given a
non-array fence.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489768492-25190-1-git-send-email-p.zabel@pengutronix.de
2017-03-17 23:51:36 +05:30
Linus Torvalds
102ed8c35a amd, intel, tilcdc, omap, and malidp fixes.
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYy2bCAAoJEAx081l5xIa+wDAQAJTrgKmSOu8Vqv8YZqAHc46r
 bnsYOs9Xs4YYId8QP2QXkqI8lzlDmNlecn9ARYRBLR/UfAVqnZzirWjolL66D5FI
 ZVj9R+WuujrN/8eimkZPwcZRfdi6RRgwHRbbXthMoiKXq/ydE5xnUtEv5rp9WHFb
 QZeUrhhDdNXNORiwOlCjpqu7DvolRQmfroOh7xaDgSQoCmhyCB9D3pRyFONGDbkf
 LSf5WUP4VFTYrGCKZLXCqZkfcve+k99sQcuFcEnX3Pg+XFjScrCTa5XAiBLiV3bR
 62JI2rcyZqKkLV9iqXDQp/P3Rbz9qero0xaDpF51aNWKJlsioW07V9BLsEemdxg2
 3wdG51jsGDZ2g9cQL37vfKXQH5r3V1KUaXD1HVdY2y4vWT3BBWc8I7UAddfeCCAF
 FBMzyAd9SjoI6PgkEZqshFAO1Z/QWux9wjpcZ7CWte8F/5Cul8QOl7ZO8Hg4bN5i
 VaKTxAT91FwvDgbfVSZ+L+EeVyns9WKRUDt19HRIPruKMwjLPBGmZrL4UChIzacz
 XJYkFdR1rOUQFsgcPnyWqkBQfjB0hiryJSuGGXMAIWKlsbsCUth/+ekUrwDtBNdP
 zbzyRBa0WMlNxCxeVcmNfCXMqNYJUlcD7lAMe3aKg/WUIQqVTcT6gyxcf8dkhVu9
 hosSva7b03GnK9ei44+y
 =0d8b
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Bunch of fixes across the drivers, in a St Patrick's day pull request
  (please turn terminal colors to green on black or black on green for
  full effect).

  On the arm side, tilcdc, omap and malidp got fixes, while amd has some
  powermanagement fixes, and intel has a set of fixes across the driver.

  Nothing seems to bad or scary at this point"

* tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
  drm/amd/amdgpu:  Fix debugfs reg read/write address width
  drm/amdgpu/si: add dpm quirk for Oland
  drm/radeon/si: add dpm quirk for Oland
  drm: amd: remove broken include path
  drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
  drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
  drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
  drm/i915: Fix forcewake active domain tracking
  drm/i915: Nuke skl_update_plane debug message from the pipe update critical section
  drm/i915: use correct node for handling cache domain eviction
  uapi: fix drm/omap_drm.h userspace compilation errors
  drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
  drm/amdgpu: fix parser init error path to avoid crash in parser fini
  drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
  drm: mali-dp: Fix smart layer not going to composition
  drm: mali-dp: Remove mclk rate management
  drm/i915: Drain the freed state from the tail of the next commit
  drm/i915: Nuke debug messages from the pipe update critical section
  drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl
  drm/i915: Store a permanent error in obj->mm.pages
  ...
2017-03-17 11:19:52 -07:00
Arnaldo Carvalho de Melo
f2ba3ee08e tools headers: Sync {tools/,}arch/x86/include/asm/cpufeatures.h
We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used
in the 'perf bench mem' benchmarks.

The changes in the following csets are not relevant for this usecase,
but lets sync it to silence the diff detector in the tools build system:

	6fb895692a ("x86/cpufeature: Add 5-level paging detection")

Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 15:06:58 -03:00
Chris Wilson
51a575d957 drm/i915: Retire an active batch pool object rather than allocate new
Since obj->active_count is only updated upon retirement, if we see an
active object in the batch pool, double check that is still active
before deciding to allocate a new object.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-17 17:57:20 +00:00
Stephen Boyd
016da20148 hrtimer: Remove hrtimer_peek_ahead_timers() leftovers
This function was removed in commit c6eb3f70d4 (hrtimer: Get rid of
hrtimer softirq, 2015-04-14) but the prototype wasn't ever deleted.

Delete it now.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Link: http://lkml.kernel.org/r/20170317010814.2591-1-sboyd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-17 18:24:58 +01:00
Chris Wilson
92a0256e9a drm/i915: Add i810/i815 pci-ids for completeness
To improve our historical record and to simplify userspace that wants to
include i915_pciids.h as its canonical breakdown of PCI IDs and their
respective generations, include the gen1 ids for i810 and i815.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313112810.4202-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
2017-03-17 17:09:06 +00:00
Chris Wilson
6c943de668 drm/i915: Skip execlists_dequeue() early if the list is empty
Do an early read of the execlists' queue before we take the spinlock and
start checking. This is safe as the first writer to the execlists queue
will cause the tasklet to be run again after a memory barrier.

v2: Keep guc in sync with execlists queue changes
v3: Explain the mb between the tasklet running on one cpu and the
execlist_first update and schedule from a second cpu.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317120716.17191-1-chris@chris-wilson.co.uk
2017-03-17 15:53:26 +00:00
Chris Wilson
e637d2cba8 drm/i915: Stop using obj->obj_exec_link outside of execbuf
i915_gem_stolen_list_info() sneakily takes advantage of the
obj->obj_exec_link to save itself from having to allocate. Enough of the
subterfuge, just allocate an array of pointers and sort them instead of
the list.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-7-chris@chris-wilson.co.uk
2017-03-17 15:53:26 +00:00
Chris Wilson
facbecad71 drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
Before rc6 is initialised (after driver load or resume), the value inside
VLV_COUNTER_CONTROL is undefined so we cannot make an assertion that is
in HIGH_RANGE mode.

Fixes: 6b7f6aa75e ("drm/i915: Use coarse grained residency counter with byt")
Testcase: igt/drv_suspend/debugfs-reader
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317125918.11351-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2017-03-17 15:53:26 +00:00
Ander Conselvan de Oliveira
234516afbb drm/i915/glk: Enable pooled EUs for Geminilake
Geminilake also supports pooled EUs. Enable it.

It is unclear if the recommendation to disable it for 2x6 configurations
from commit e015dd69b2 ("drm/i915/bxt: Add WaEnablePooledEuFor2x6")
should also apply to GLK, but it is applied anyway to be on the safe
side. That restriction can be lifted later if determined not to impact
performance.

The extra restriction should not impact user space either. The only user
space that uses this feature is Beignet, and it only does so for 3x6
devices. See See Beignet's commit 6901899ec90a ("Runtime: set the sub
slice according to kernel pooled EU configure.").

v2: Improve commit message. (Mika, Roy)

Cc: Arun Siluvery <arun.siluvery@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Yang Rong <rong.r.yang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317140436.24645-1-ander.conselvan.de.oliveira@intel.com
2017-03-17 17:05:36 +02:00
Alexander Shishkin
05a1f47ed4 perf tools: Handle partial AUX records and print a warning
This patch decodes the 'partial' flag in AUX records and prints
a warning to the user, so that they don't have to guess why their
PT traces contain gaps (or missing altogether):

  Warning:
  AUX data had gaps in it 8 times out of 8!

  Are you running a KVM guest in the background?

Trying to be even more helpful, we will detect if the user's kvm driver sets up
exclusive VMX root mode for the entire lifespan of the kvm process:

  Reloading kvm_intel module with vmm_exclusive=0
  will reduce the gaps to only guest's timeslices.

Note however, that you'll still have gaps in cpu-wide traces even with
vmm_exclusive=0, but the number of gaps will be below 100% (as opposed to the
above example).

Currently this is the only reason for partial records.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:52:18 -03:00
Alexander Shishkin
38a33f0712 tools include: Sync {,tools/}include/uapi/linux/perf_event.h
To get PERF_AUX_FLAG_PARTIAL, introduced in:

  ae0c2d995d ("perf/core: Add a flag for partial AUX records")

and that will be used to warn the user about gaps in AUX records due
to VMX being used in KVM guests.

Silences the kernel/tools file copy detector:

  Warning: include/uapi/linux/perf_event.h differs from kernel

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:49:09 -03:00
Alexander Shishkin
b9835a9008 tools lib api fs: Introduce sysfs__read_bool
Will be used in a upcoming patch warning about PERF_RECORD_AUX data
gaps, reading the "module/kvm_intel/parameters/vmm_exclusive" sysfs
entry.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:49:09 -03:00
Arnaldo Carvalho de Melo
f371594a51 perf timechart: Use OPT_PARENT for common options
Move -T/--tasks-only and -P/--power-only options to a separate options
array that then gets referenced via OPT_PARENT from the 'perf timechart'
and 'perf timechart record' option arrays.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j80lol9wj1i6556ibh48iebe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:49:08 -03:00
Arnaldo Carvalho de Melo
b40e36121e perf lock: Make 'f' part of the common 'lock_options'
All options need the -f/--force option, so move it to the array
referenced via OPT_PARENT.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-unbeionpi58rioh4e9w8kp4n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:49:07 -03:00
Changbin Du
249eed5315 perf lock: Subcommands should include common options
When I use -i option for report subcommand, it doesn't accept it.  We
need add common options using OPT_PARENT macro.

perf lock report -i lock_perf.data
  Error: unknown switch `i'

  Usage: perf lock report [<options>]

    -f, --force           don't complain, do it
    -k, --key <acquired>  key for sorting ...

Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170317055342.8284-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 11:49:07 -03:00
Tejun Heo
77f88796ce cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups
Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator.  Once the new kthread starts
running, it initializes itself and wakes up the creator.  The creator
then can further configure the kthread and then let it start doing its
job by waking it up.

In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland.  When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity.  This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.

Unfortunately, the cgroup side of protection is racy.  While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.

This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one.  Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.

This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland.  kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed.  The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.

It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side.  Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.

v2: Switch to a simpler implementation using a new task_struct bit
    field suggested by Oleg.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-and-debugged-by: Chris Mason <clm@fb.com>
Cc: stable@vger.kernel.org # v4.3+ (we can't close the race on < v4.3)
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-17 10:18:47 -04:00
Ingo Molnar
a01851faab perf/urgent fix
- Fix symbols__fixup_end heuristic for corner cases, such as JITted eBPF
   programs, that are loaded at page aligned addresses, just after the
   kernel proper (Daniel Borkmann)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYy+vGAAoJENZQFvNTUqpAbHEQAKxgQ5S3Lydbt2Ihy9TbaTKF
 HOclArR8n96nbIuJk/C5b8Tcrp8FDxhEv0FZd5qAIpEJ2ZWdAXdXrZcFzNq3JZDD
 gXGwpC7kjb0wqGwwmAQnxF444CKYkmsSf6NiW9//ZnA23tYddYbgUsRJyB22NT0Z
 byNYQP0oBhK8x9jY0RWxK/DDPdEUSyVXIl2rUWckmh5ovyU/FBVxj2QXB/BOLguC
 QTYPNXs7QDNSGvZKrXHSwZn3CULyotvPnGPv9K0eM5VZp6MLUMITg7tI0zBlTJTk
 Ghf0XuC1Fijq9oxZgZ/8HAs/Ypx/MCdnml6v3RBZfeOvhE6M1aYXEzjEHw1l1EGj
 pZxrPz9l+16pmFebRmpkfmmRyatFul9WNzQzMiuQ4d3XVZqNeqm5eFNVWCrvPQhU
 lFt0Wx7y30fKQwECcOgFNxhGDeo68QPC8iDelpMZXmVxFHosM0TRYvLXKlzOp/oP
 pNtGNCEC3OI9sWbhXsY8dzXB2fG0gH4SI0MqjGd+72rM8JJiqbea54KXUjxCEVDc
 j1De7rqPpQSUrQz3UpxpVknzbG5ANO+FbmkaV+psGanKgQssKsVAGERMpXKQMrWC
 XfYgjfaXjLWy950GMZxLXK4AdrjEt0Zyelg1++dRyTvqV0i1YC4q4fQP9RHCjPyO
 pMWBvVTkZZtQdECgbAzx
 =KhBf
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.11-20170317' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fix from Arnaldo Carvalho de Melo:

- Fix symbols__fixup_end heuristic for corner cases, such as JITted eBPF
  programs, that are loaded at page aligned addresses, just after the
  kernel proper (Daniel Borkmann)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-17 15:13:28 +01:00
Daniel Borkmann
e7ede72a6d perf symbols: Fix symbols__fixup_end heuristic for corner cases
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

 i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a18 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17 10:30:22 -03:00
Stephen Boyd
0630b61439 regulator: Mark supply_name const and duplicate it as such
The supply_name member of struct regulator can be const as we
don't change it in the regulator core. Furthermore, when we copy
the supply name we can use kstrdup_const() here to avoid a copy
if the name is in the ro data section.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 13:12:22 +00:00
Frode Isaksen
e542f7e63c spi: loopback-test: fix compile error on x86
Fix compile error caused by missing vmalloc() definition
on x86 (and maybe other platforms) by including vmalloc.h.

Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 13:06:12 +00:00
Chris Wilson
e642c85b03 drm/i915: Remove superfluous i915_add_request_no_flush() helper
The only time we need to emit a flush inside request emission is after
an execbuffer, for which we can use the full __i915_add_request(). All
other instances want the simpler i915_add_request() without flushing, so
remove the useless helper.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317114709.8388-1-chris@chris-wilson.co.uk
2017-03-17 13:03:25 +00:00
Tobias Klauser
13b0ea0f59 batman-adv: Omit unnecessary memset of netdev private data
The memory for netdev_priv is allocated using kzalloc in alloc_netdev
(or alloc_netdev_mq respectively) so there is no need to set it to 0
again.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-17 12:53:35 +01:00
Sven Eckelmann
4e09991af2 batman-adv: Use __func__ to add function names to messages
The name of the function might change in which these messages are printed.
It is therefore better to let the compiler handle the insertion of the
correct function name.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-17 12:53:35 +01:00
Reshetova, Elena
b54ab92b84 netfilter: refcounter conversions
refcount_t type and corresponding API (see include/linux/refcount.h)
should be used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-17 12:49:43 +01:00
Johannes Berg
b6ecfd469e cfg80211: preserve wdev ID across netns changes
When a wdev changes network namespace, its wdev ID will get
reassigned since NETDEV_REGISTER is called again, in the new
network namespace. Avoid that by checking if it was already
assigned before, and document why we do that.

Reported-and-tested-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-17 11:39:55 +01:00
Ard Biesheuvel
b7ede5a1f5 ARM: 8662/1: module: split core and init PLT sections
Since commit 35fa91eed8 ("ARM: kernel: merge core and init PLTs"),
the ARM module PLT code allocates all PLT entries in a single core
section, since the overhead of having a separate init PLT section is
not justified by the small number of PLT entries usually required for
init code.

However, the core and init module regions are allocated independently,
and there is a corner case where the core region may be allocated from
the VMALLOC region if the dedicated module region is exhausted, but the
init region, being much smaller, can still be allocated from the module
region. This puts the PLT entries out of reach of the relocated branch
instructions, defeating the whole purpose of PLTs.

So split the core and init PLT regions, and name the latter ".init.plt"
so it gets allocated along with (and sufficiently close to) the .init
sections that it serves. Also, given that init PLT entries may need to
be emitted for branches that target the core module, modify the logic
that disregards defined symbols to only disregard symbols that are
defined in the same section.

Fixes: 35fa91eed8 ("ARM: kernel: merge core and init PLTs")
Cc: <stable@vger.kernel.org> # v4.9+
Reported-by: Angus Clark <angus@angusclark.org>
Tested-by: Angus Clark <angus@angusclark.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-03-17 10:01:28 +00:00
Chris Brandt
f08578e6da ARM: 8661/1: dts: r7s72100: add l2 cache
Note that early-bresp-disable and full-line-zero-disable are required
because the sideband signals between the CPU and L2C were not connected
in this SoC.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-03-17 10:01:28 +00:00