Commit graph

693,635 commits

Author SHA1 Message Date
Joonyoung Shim
e41456bfc8 drm/exynos: g2d: prevent integer overflow in
The size computations done in the ioctl function use an integer.
If userspace submits a request with req->cmd_nr or req->cmd_buf_nr
set to INT_MAX, the integer computations overflow later, leading
to potential (kernel) memory corruption.

Prevent this issue by enforcing a limit on the number of submitted
commands, so that we have enough headroom later for the size
computations.

Note that this change has no impact on the currently available
users in userspace, like e.g. libdrm/exynos.

While at it, also make a comment about the size computation more
detailed.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:50:35 +09:00
Dan Carpenter
8646dcb8a0 drm/exynos: fix a timeout loop
We were trying to print an error message if we timed out here, but the
loop actually ends with "tries" set to UINT_MAX and not zero.  Fix this
by changing from tries-- to --tries.

A for loop would actually be the most natural way to do this.  My fix
means we only loop 99 times instead of 100 but that's probably ok.

Fixes: a696394c52 ('drm/exynos: mixer: simplify loop in vp_win_reset()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:50:30 +09:00
Inki Dae
41cbf0fdaa drm/exynos: use atomic helper commit
This patch replaces specific atomic commit function
with atomic helper commit one.

For this, it removes existing atomic commit function
and relevant code specific to Exynos DRM and makes
atomic helper commit to be used instead.

Below are changes for the use of atomic helper commit:
- add atomic_commit_tail callback specific to Exynos DRM
  . default implemention of atomic helper doesn't mesh well
    with runtime PM so the device driver which supports runtime
    PM should call drm_atomic_helper_commit_modeset_enables function
    prior to drm_atomic_helper_commit_planes function call.
    atomic_commit_tail callback implements this call ordering.
- allow plane commit only in case that CRTC device is enabled.
  . for this, it calls atomic_helper_commit_planes function
    with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2017-01-31 08:49:47 +09:00
Inki Dae
9db41d4323 drm/exynos: remove unnecessary codes
This patch removes exynos_drm_crtc_cancel_page_flip call
when drm is closed because at that time, events will be released
by drm_events_release function.

Changelog v1:
- remove exynos_drm_crtc_cancel_page_flip function also because
  this funtion isn't used anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
2017-01-31 08:49:42 +09:00
Marek Szyprowski
4e8ba5cc88 drm/exynos: mic: Add runtime PM support
This patch adds runtime support calls to notify device core when MIC
device is really in use. Runtime PM is implemented by enabling and
disabling clocks like in other Exynos DRM subdrivers. Adding runtime
PM support is needed to let power domain with this device to be turned
off when display is not used.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:49:38 +09:00
Daniel Vetter
328c057ca4 drm/exynos: Stop using drm_framebuffer_unregister_private
This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But exynos is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:49:35 +09:00
Hoegeun Kwon
cc2b022518 drm/exynos: mic: Fix parse_dt function
The OF graph is not necessary because the panel is a child of
dsi. therefore, the parse_dt function of dsi does not need to
check the remote_node connected to the panel. and the whole
parse_dt function should be refactored later.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:49:33 +09:00
Hoegeun Kwon
e87eb57c69 drm/exynos: mic: Add mode_set callback function
Before applying the patch, used the of_get_videomode function to
parse the display-timings in the panel which is the child driver
of dsi in the devicetree. this is wrong. So removed the
of_get_videomode and fixed to get videomode struct through
mode_set callback function.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31 08:49:31 +09:00
Linus Torvalds
f9a42e0d58 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Several small bug fixes and tidies, along with a fix for non-resumable
  memory errors triggered by userspace"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Handle PIO & MEM non-resumable errors.
  sparc64: Zero pages on allocation for mondo and error queues.
  sparc: Fixed typo in sstate.c. Replaced panicing with panicking
  sparc: use symbolic names for tsb indexing
2017-01-30 15:47:19 -08:00
Lucas Stach
a71280722e PCI: imx6: Remove LTSSM disable workaround
This causes CPU hangs when the system is reset by the watchdog, as the GPRs
aren't cleared, but the clocks are back to disabled state.

If the bootloader uses PCIe, it must take care to bring it down into a safe
state, before passing control to the Linux kernel.  This is the only way to
get a properly operating system at all times and circumstances.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-30 17:00:31 -06:00
Bjorn Helgaas
cdcb33f982 PCI: Avoid possible deadlock on pci_lock and p->pi_lock
pci_lock is an IRQ-safe spinlock that protects all accesses to PCI
configuration space (see PCI_OP_READ() and PCI_OP_WRITE() in pci/access.c).

The pci_cfg_access_unlock() path acquires pci_lock, then p->pi_lock (inside
wake_up_all()).  According to lockdep, there is a possible path involving
snbep_uncore_pci_read_counter() that could acquire them in the reverse
order: acquiring p->pi_lock, then pci_lock, which could result in a
deadlock.  Lockdep details are in the bugzilla below.

Avoid the possible deadlock by dropping pci_lock before waking up any
config access waiters.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=192901
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-30 16:55:33 -06:00
David S. Miller
54791b276b Merge branch 'sparc64-non-resumable-user-error-recovery'
Liam R. Howlett says:

====================
sparc64: Recover from userspace non-resumable PIO & MEM errors

A non-resumable error from userspace is able to cause a kernel panic or trap
loop due to the setup and handling of the queued traps once in the kernel.
This patch series addresses both of these issues.

The queues are fixed by simply zeroing the memory before use.

PIO errors from userspace will result in a SIGBUS being sent to the user
process.

The MEM errors form userspace will result in a SIGKILL and also cause the
offending pages to be claimed so they are no longer used in future tasks.
SIGKILL is used to ensure that the process does not try to coredump and result
in an attempt to read the memory again from within kernel space.  Although
there is a HV call to scrub the memory (mem_scrub), there is no easy way to
guarantee that the real memory address(es) are not used by other tasks.
Clearing the error with mem_scrub would zero the memory and cause the other
processes to proceed with bad data.

The handling of other non-resumable errors remain unchanged and will cause a
panic.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 14:28:22 -08:00
Liam R. Howlett
047487241f sparc64: Handle PIO & MEM non-resumable errors.
User processes trying to access an invalid memory address via PIO will
receive a SIGBUS signal instead of causing a panic.  Memory errors will
receive a SIGKILL since a SIGBUS may result in a coredump which may
attempt to repeat the faulting access.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 14:27:54 -08:00
Liam R. Howlett
7a7dc961a2 sparc64: Zero pages on allocation for mondo and error queues.
Error queues use a non-zero first word to detect if the queues are full.
Using pages that have not been zeroed may result in false positive
overflow events.  These queues are set up once during boot so zeroing
all mondo and error queue pages is safe.

Note that the false positive overflow does not always occur because the
page allocation for these queues is so early in the boot cycle that
higher number CPUs get fresh pages.  It is only when traps are serviced
with lower number CPUs who were given already used pages that this issue
is exposed.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 14:27:53 -08:00
Sarangdhar Joshi
2099c77d4a remoteproc: Drop firmware_loading_complete
firmware_loading_complete is used to synchronize operations
on rproc while asynchronous firmware loading is in progress.
However, rproc_boot() no longer waits on
firmware_loading_complete. Hence drop this completion
variable altogether and handle the race between rproc_del()
and rproc_boot() using new state RPROC_DELETED.

The request_firmware_nowait() will hold the reference to
rproc device by using a get_device()/put_device(), so the
rproc struct will remain valid even when we return from
rproc_del() before the asynchronous call to
rproc_fw_config_virtio() completes.

CC: Loic Pallardy <loic.pallardy@st.com>
CC: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 14:18:54 -08:00
Sarangdhar Joshi
608d792192 remoteproc: Add RPROC_DELETED state
Add new state RPROC_DELETED to handle synchronization
between rproc_del() and other operations on rproc. This
state represents the rproc device that has been "deleted".

CC: Loic Pallardy <loic.pallardy@st.com>
CC: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 14:18:52 -08:00
Sarangdhar Joshi
b003d45b37 remoteproc: Move rproc_delete_debug_dir() to rproc_del()
The "remoteproc{0,1...}" sysfs entries are added in
rproc_add() and deleted in rproc_type_release() instead of
in rproc_del(). That leaves these lingering entries sticking
around after we return from rproc_del(). Move the
rproc_delete_debug_dir() to rproc_del() to fix this.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 14:18:40 -08:00
Tejun Heo
b807421a72 cgroup: misc cleanups
* cgrp_dfl_implicit_ss_mask is ulong instead of u16 unlike other
  ss_masks.  Make it a u16.

* Move have_canfork_callback together with other callback ss_masks.

Signed-off-by: Tejun Heo <tj@kernel.org>
2017-01-30 17:09:07 -05:00
David S. Miller
63c1904290 Merge branch 'ESPRESSObin-ethernet'
Gregory CLEMENT says:

====================
dsa: Add support for the ethernet switch on the ESPRESSObin

This set of patches adds support for the Marvell Ethernet Topaz switch
family (88E6141/88E6341) which is found on the ESPRESSObin. With this
series the network is usable on this board.

As usual, I rebased the series on the very last net-next/master. In
this series there is no temperature support which need some patches
form Andrew Lunn.

As soon as Andrew Lunn will post the needed patch I will send a patch
to enable the temperature support.

Changelog:

v6 -> v7:
- rebased on net-next/master (5b8784aaf2)
- Fixed the wrong age time coeff from 15s to 3.75s.
- Remove support for temperature sensor

v5 -> v6:
- rebased on net-next/master (d140199af5)
- Fix the redundant check on mv88e6xxx_6341_family (reported by Julia
  Lawall)
- Add support for the 88E6141
- Move support for temperature sensor in the phy part
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:50:57 -05:00
Gregory CLEMENT
1558727a1c net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141
The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with
four integrated 10/100/1000Mbps Ethernet transceivers and one high speed
SerDes interfaces.

It belongs to the Topaz family and unlike the 88E6341 it does not have
a TCAM.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:50:57 -05:00
Gregory CLEMENT
a75961d0eb net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341
The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with
four integrated 10/100/1000Mbps Ethernet transceivers and one high speed
SerDes interfaces. It is partially compatible with switches of family
88E6352 and switches of family 88E6390.

This commit adds an initial support for this switch by describing its
capabilities to the driver and introducing a new family.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:50:56 -05:00
Romain Perier
891daf49b0 net: dsa: mv88e6xxx: Don't forbid MDIO I/Os for PHY addr >= num_of_ports
Some Marvell ethernet switches have internal ethernet transceivers with
hardcoded phy addresses. These addresses can be greater than the number
of ports or its value might be different than the associated port number.
This is for example the case for MV88E6341 that has 6 ports and internal
Port 1 to Port4 PHYs mapped at SMI addresses from 0x11 to 0x14.

This commits fixes the issue by removing the condition in MDIO callbacks.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:50:56 -05:00
Avaneesh Kumar Dwivedi
90a068ed3f remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.
This patch add slpi remoteproc support in existing adsp rproc driver.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
[bjorn: documented aggre2 and px-supply]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 13:48:41 -08:00
Simon Horman
040587af31 net/sched: cls_flower: Correct matching on ICMPv6 code
When matching on the ICMPv6 code ICMPV6_CODE rather than
ICMPV4_CODE attributes should be used.

This corrects what appears to be a typo.

Sample usage:

tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
	indev eth0 ip_proto icmpv6 type 128 code 0 action drop

Without this change the code parameter above is effectively ignored.

Fixes: 7b684884fb ("net/sched: cls_flower: Support matching on ICMP type and code")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:42:09 -05:00
David S. Miller
0d29ed28da linux-can-fixes-for-4.10-20170130
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEES2FAuYbJvAGobdVQPTuqJaypJWoFAliPEGcTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRA9O6olrKklakWHB/971KHqyYL5Rhbo8rOl+XKIpTLSFCJi
 tgaN1mOUaBl2UIlevzW/9kNP7DkT+0axaEdFwsfZCm3opLwCaYI9TtxbDLmMx8VW
 p7/djLDDcE9hgH1J6PnHL6w+Mlnr6NcdmVlU7lm8YyiCcALQp6EdYXVh1T1/xD0+
 ytoqO2A8pgvR1VfcD7Q4M3qE0L9JQRrFhDenStn8fql6fpb2RqFT2iogQF6hta1Y
 YNZx0pK24gpCDTWqR06BBuHHDLpS6nGmnMl5Qvft1FBmSsvKpp4qAMN2IVyYA402
 SdEHJHlo9SmqNZmQg2QQg5Hn0KJ4iY7PxLJGc2yPvZowa9ewBRRW2xYG
 =CiTr
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-4.10-20170130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2017-01-30

this is a pull request of one patch.

The patch is by Oliver Hartkopp and fixes the hrtimer/tasklet termination in
bcm op removal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:38:39 -05:00
Dan Carpenter
cdaf25dfc0 smc: some potential use after free bugs
Say we got really unlucky and these failed on the last iteration, then
it could lead to a use after free bug.

Fixes: cd6851f303 ("smc: remote memory buffers (RMBs)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 16:37:55 -05:00
Avaneesh Kumar Dwivedi
e323fc030c remoteproc: qcom: Add additional agree2_clk and px regulator resource.
This patch add additional clock and regulator resource which are
initialized based on compatible and has no impact on existing driver
working. This resourse addition enable the existing driver to handle.
low pass sensor processor device also.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 13:33:19 -08:00
Gautham R. Shenoy
b48ff52043 Documentation:powerpc: Add device-tree bindings for power-mgt
Document the device-tree bindings defining the the properties under
the @power-mgt node in the device tree that describe the idle states
for Linux running on baremetal POWER servers.

These bindings are documented separately instead of using the the
common idle state bindings since the idle-states on POWER servers
are exposed as property arrays where as the common idle state bindings
expect idle-states to be described as nodes.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 08:32:14 +11:00
Gautham R. Shenoy
09206b600c powernv: Pass PSSCR value and mask to power9_idle_stop
The power9_idle_stop method currently takes only the requested stop
level as a parameter and picks up the rest of the PSSCR bits from a
hand-coded macro. This is not a very flexible design, especially when
the firmware has the capability to communicate the psscr value and the
mask associated with a particular stop state via device tree.

This patch modifies the power9_idle_stop API to take as parameters the
PSSCR value and the PSSCR mask corresponding to the stop state that
needs to be set. These PSSCR value and mask are respectively obtained
by parsing the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" fields from the device tree.

In addition to this, the patch adds support for handling stop states
for which ESL and EC bits in the PSSCR are zero. As per the
architecture, a wakeup from these stop states resumes execution from
the subsequent instruction as opposed to waking up at the System
Vector.

The older firmware sets only the Requested Level (RL) field in the
psscr and psscr-mask exposed in the device tree. For older firmware
where psscr-mask=0xf, this patch will set the default sane values that
the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and
TR). For the new firmware, the patch will validate that the invariants
required by the ISA for the psscr values are maintained by the
firmware.

This skiboot patch that exports fully populated PSSCR values and the
mask for all the stop states can be found here:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html

[Optimize the number of instructions before entering STOP with
ESL=EC=0, validate the PSSCR values provided by the firimware
maintains the invariants required as per the ISA suggested by Balbir
Singh]

Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 08:32:13 +11:00
Gautham R. Shenoy
9e9fc6f00a cpuidle:powernv: Add helper function to populate powernv idle states.
In the current code for powernv_add_idle_states, there is a lot of code
duplication while initializing an idle state in powernv_states table.

Add an inline helper function to populate the powernv_states[] table
for a given idle state. Invoke this for populating the "Nap",
"Fastsleep" and the stop states in powernv_add_idle_states.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 08:32:13 +11:00
Gautham R. Shenoy
dd34c74c97 powernv:stop: Rename pnv_arch300_idle_init to pnv_power9_idle_init
Balbir pointed out that the name of the function pnv_arch300_idle_init
was inconsistent with the names of the variables and functions
pertaining to POWER9 features in book3s_idle.S.

This patch renames pnv_arch300_idle_init to pnv_power9_idle_init.

This patch does not change any behaviour.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 08:32:12 +11:00
Gautham R. Shenoy
823b7bd515 powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro
Currently all the low-power idle states are expected to wake up
at reset vector 0x100. Which is why the macro IDLE_STATE_ENTER_SEQ
that puts the CPU to an idle state and never returns.

On ISA v3.0, when the ESL and EC bits in the PSSCR are zero, the CPU
is expected to wake up at the next instruction of the idle
instruction.

This patch adds a new macro named IDLE_STATE_ENTER_SEQ_NORET for the
no-return variant and reuses the name IDLE_STATE_ENTER_SEQ
for a variant that allows resuming operation at the instruction next
to the idle-instruction.

Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 08:32:12 +11:00
Avaneesh Kumar Dwivedi
c7715e47bf remoteproc: qcom: Compatible string based resource initialization.
This patch initialize certain driver related data based on compatible
string. This enable driver to handle more than one similar device in
by differentiating in probe their private data.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 13:29:39 -08:00
Dan Carpenter
0abd6bdde0 rpmsg: unlock on error in rpmsg_eptdev_read()
We should unlock before returning if skb_dequeue() returns a NULL.

Fixes: c0cdc19f84 ("rpmsg: Driver for user space endpoint interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30 13:20:24 -08:00
Linus Torvalds
751321b3dd RTC fixes for 4.10:
- Allow jz4740 to build as a module again by using kernel_halt()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAliPmqgACgkQ2KKDO9oT
 4sLIIA/+ORkxQ7JbnNM0kwhsL+MUP46CkE7GrgoEGubS/LghKqZhyf2WNXaqJ48J
 tT+Hzn1NhycBrjlhzJ0GEAcq9aWPDJe/56/ZPWABgH4Gfx64Ea1bfhVRgMzBXoTd
 7KE2IkZNCSvaE6UGnurderl6qsJH80HK1AiYz0ZN0xNR/7rxjB2O4VoYNl3rBqhB
 HQG5p6izvBDbhawmyDJcDi7MI3ylKI/ok8NIdXPBv0+DQ0gtBYmrM7JwS8RnbmWZ
 LFtJQE9+M2P58LiEJOv4Ij9jgMt2LiYkDcX/U29Hraeqp14TSPiYbLRUs29WyBRY
 jOmeM9n8FBxxdA4wqN3MAc32EMoHs642lWeDNVfLXiBuXVFAnuKQBagpDY0FDJyx
 ndaG0F6xCTvkQrAbKOtIM0b4kYX0Cdh4OrPstsef0B4WxUUTKWko7dE673GTSqfS
 3aQaXXLkcKY1TNNDtvmCTqvCE+rITwb1nRfQEyDvUnDsgjF2YXxPrAa78qq8qyBy
 15w3Dc23WOglVdV5zfqskeEGWaXVZpZx9zcPBy2Ezj5/KfhE+UNs5ZzPBIzBrQqx
 Sfuwpq6RJcJUP8Rj16869vK1b7C8oKbAX3QYSu6zUncX43n+TC+Vbz6bWrK+ckrM
 2pb6GReyDg66Ztr7N0FqRI9aawmj1wn0s6V/oPx0ukV+iqyCCOY=
 =dHxL
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC fix from Alexandre Belloni:
 "A single fix for this cycle. It is worth taking it for 4.10 so that
  distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to
  y in their config.

  Summary:
   - Allow jz4740 to build as a module again by using kernel_halt()"

* tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: jz4740: make the driver buildable as a module again
2017-01-30 13:18:12 -08:00
David S. Miller
1930b60352 Merge branch 'dsa-port-mirroring'
Florian Fainelli says:

====================
net: dsa: Port mirroring support

This patch series adds support for port mirroring in the two
Broadcom switch drivers. The major part of the functional are actually with
the plumbing between tc and the drivers.

Changes in v5:

- Added Jiri's Reviewed-by tag to first patch
- rebase against latest net-next/master after bcm_sf2 CFP series

Changes in v4:

- rebased against latest net-next/master after Vivien's changes

Changes in v3:

- removed multiline comments from added structures
- simplify error handling in dsa_slave_add_cls_matchall

Changes in v2:

- fixed filter removal logic to disable the ingress or egress mirroring
  when there are no longer ports being monitored in ingress or egress

- removed a stray list_head in dsa_port structure that is not used

Tested using the two iproute2 examples:

      tc qdisc  add dev eth1 handle ffff: ingress
      tc filter add dev eth1 parent ffff:           \
               matchall skip_sw                      \
               action mirred egress mirror           \
               dev eth2
      tc qdisc add dev eth1 handle 1: root prio
      tc filter add dev eth1 parent 1:               \
               matchall skip_sw                       \
               action mirred egress mirror            \
               dev eth2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:56:40 -05:00
Florian Fainelli
ec960de615 net: dsa: bcm_sf2: Add support for port mirroring
We can use b53_mirror_add and b53_mirror_del because the Starfighter 2
is register compatible in that specific case.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:55:47 -05:00
Florian Fainelli
ed3af5fd08 net: dsa: b53: Add support for port mirroring
Add support for configuring port mirroring through the cls_matchall
classifier. We do a full ingress or egress capture towards the capture
port. Future improvements could include leveraging the divider to allow
less frames to be captured, as well as matching specific MAC DA/SA.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:55:47 -05:00
Florian Fainelli
151da0171e net: dsa: b53: Add mirror capture register definitions
Add definitions for the different Roboswitch registers relevant for
ingress and egress mirroring.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:55:47 -05:00
Florian Fainelli
f50f212749 net: dsa: Add plumbing for port mirroring
Add necessary plumbing at the slave network device level to have switch
drivers implement ndo_setup_tc() and most particularly the cls_matchall
classifier. We add support for two switch operations:

port_add_mirror and port_del_mirror() which configure, on a per-port
basis the mirror parameters requested from the cls_matchall classifier.

Code is largely borrowed from the Mellanox Spectrum switch driver.

Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:55:46 -05:00
Ludovic Desroches
420a3879d6 MAINTAINERS: change email address from atmel to microchip
Use microchip email address instead of old atmel one.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-30 21:54:04 +01:00
Nicolas Ferre
e085b9d8fc MAINTAINERS: at91: change email address
Following the Microchip / Atmel merger and the unification of internal IT, it's
more convenient for me to swith to the microchip.com address. Change all my
entries to reflect this.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-30 21:54:04 +01:00
Arnd Bergmann
0b351c986a PCI: rockchip: Mark PM functions as __maybe_unused
When CONFIG_PM_SLEEP is disabled, we get harmless build warnings:

  host/pcie-rockchip.c:1267:12: error: 'rockchip_pcie_resume_noirq' defined but not used [-Werror=unused-function]
  host/pcie-rockchip.c:1240:12: error: 'rockchip_pcie_suspend_noirq' defined but not used [-Werror=unused-function]

Marking both functions as __maybe_unused avoids the warning without the
need for #ifdef around them.

Fixes: 013dd3d5e1 ("PCI: rockchip: Add system PM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-01-30 14:52:15 -06:00
Vlad Yasevich
2b89ed65a6 ipv6: Paritially checksum full MTU frames
IPv6 will mark data that is smaller that mtu - headersize as
CHECKSUM_PARTIAL, but if the data will completely fill the mtu,
the packet checksum will be computed in software instead.
Extend the conditional to include the data that fills the mtu
as well.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:51:12 -05:00
Shawn Lin
7faebda21d PCI: rockchip: Use readl_poll_timeout() instead of open-coding it
Use readl_poll_timeout() instead of open-coding it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-30 14:50:37 -06:00
Jack Morgenstein
d585df1c5c net/mlx4_core: Avoid command timeouts during VF driver device shutdown
Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

The result is that the VF driver on the VM will experience a command
timeout during the shutdown process when the Hypervisor does not deliver
a command-completion event to the VM.

To avoid FW command timeouts on the VM when the driver's shutdown method
is invoked, we detect the absence of the VF's comm channel at the very
start of the shutdown process. If the comm-channel has already been
disabled, we cause all FW commands during the device shutdown process to
immediately return success (and thus avoid all command timeouts).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:45:27 -05:00
David S. Miller
6415aa5039 mlx5-fixes-2017-01-27
A couple of mlx5 core and ethernet driver fixes.
 
 From Or, A couple of error return values and error handling fixes.
 From Hadar, Support TC encapsulation offloads even when the mlx5e uplink
 device is stacked  under an upper device.
 From Gal, Two patches to fix RSS hash modifications via ethtool.
 From Moshe, Added a needed ets capability check.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYjmAjAAoJEEg/ir3gV/o+oMUH+QF2kdg9//kvkwWGv7FR4fBT
 6oFH9vsIpG+kGDlXGVX8wekcUCssNx/eZ7IrOrEfBnGsbuXntIjiUfT2RxasBU0Q
 K8/1szQbjbdrOiT+lB2NOyxk4fr+GNYT+k0srNS36Qr6i5sMiLDvNo1ivu7RtK+2
 KRsg8ClPWalc/lxxQJSDVpyQeI6S68jYveK8H5xNR8i7UeFFcgYv313BaobL+Nbn
 PSvLHSeJQX2Uqo1Whg12/xQgP6Q8s9OTRMI+30Gcsv1YaC2ET6dTqWPg5x+Yl1+P
 vRcCzvjQf6oD+zhmCZJBS9CchI6gFf1x03cfxIjFwfzioBBM7ux8szjIyTW9tHY=
 =bqC6
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2017-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2017-01-27

A couple of mlx5 core and ethernet driver fixes.

From Or, A couple of error return values and error handling fixes.
From Hadar, Support TC encapsulation offloads even when the mlx5e uplink
device is stacked  under an upper device.
From Gal, Two patches to fix RSS hash modifications via ethtool.
From Moshe, Added a needed ets capability check.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:44:05 -05:00
Lars-Peter Clausen
87ac0c24bd iio: tmp007: Fix name attribute ABI
The IIO ABI specifies the name field of the IIO device as:

	Description of the physical chip / device for device X.
	Typically a part number.

The tmp007 driver currently uses the name of the parent device instead.
Change this to the part name to be in accordance with the ABI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-30 20:38:13 +00:00
David S. Miller
4be9993493 Merge branch 'mlx4-misc-improvements'
Tariq Toukan says:

====================
mlx4 misc improvements

This patchset contains several improvements and cleanups
from the team to the mlx4 Eth and core drivers.

Series generated against net-next commit:
4e8f2fc1a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Thanks,
Tariq.

v3:
* Patch 6/9: forgot to actually update the commit message in v2, now it is.

v2:
* Patch 1/9: used EOPNOTSUPP and not ENOTSUPP.
* Patch 3/9: dropped, to be submitted separately in the future.
* Patch 6/9: updated commit message.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:26:44 -05:00
Shaker Daibes
1f8176f735 net/mlx4_en: Check the enabling pptx/pprx flags in SET_PORT wrapper flow
Make sure pptx/pprx mask flag is set using new fields upon set port
request. In addition, move this code into a helper function for better
code readability.

Signed-off-by: Shaker Daibes <shakerd@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 15:26:43 -05:00