Commit graph

693,635 commits

Author SHA1 Message Date
Baruch Siach
5f98e5f555 [media] adv7170: drop redundant ret local
Simplifies return value logic of adv7170_set_fmt().

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:47:05 -02:00
Baruch Siach
30e0e2ed7c [media] ov2659: remove NOP assignment
The loop over the ov2659_formats[] array just a few lines above
verifies that mf->code matches the selected array entry.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:46:29 -02:00
Colin Ian King
7289cf4acf [media] gp8psk: fix spelling mistake: "firmare" -> "firmware"
trivial fix to spelling mistake in err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:45:54 -02:00
Colin Ian King
187a1446cb [media] b2c2: fix spelling mistake: "Contunuity" -> "Continuity"
trivial fix to spelling mistake in deb_chk message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:45:34 -02:00
Colin Ian King
774ad26b2c [media] cobalt: fix spelling mistake: "Celcius" -> "Celsius"
trivial fix to spelling mistake in cobalt_info message. Anders Celsius
was the Swedish astronomer.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:45:06 -02:00
Colin Ian King
f8d5219dcd [media] dvb-frontends: fix spelling mistake on cx24123_pll_calcutate
trivial fix to spelling mistake of function name in err message,
should be cx24123_pll_calculate instead of cx24123_pll_calcutate.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:44:42 -02:00
Nicolas Iooss
6ebf75774f [media] am437x-vpfe: always assign bpp variable
In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507e ("[media] media: platform: add VPFE capture driver
support for AM437X")

Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:43:40 -02:00
Hans Verkuil
05a89739e9 [media] gen-errors.rst: document EIO
Document the EIO error since this can happen anywhere anytime and applications
should be aware of this.

Also fix typo: exaustive -> exhaustive

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:42:47 -02:00
Soren Brinkmann
6ab1a322dc [media] vivid: Enable 4k resolution for webcam capture device
Add 3840x2160 as valid resolution for the webcam capture input and
adjust the webcam intervals accordingly.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:42:04 -02:00
Corentin Labbe
fc2cc75a20 [media] media: s5p-cec: Remove references to non-existent PLAT_S5P symbol
Commit d78c16ccde ("ARM: SAMSUNG: Remove remaining legacy code")
removed the Kconfig symbol PLAT_S5P.
This patch remove the last occurrence of this symbol.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:40:45 -02:00
Corentin Labbe
ba218bf911 [media] media: s5p-cec: Remove unneeded linux/miscdevice.h include
s5p-cec: does not use any miscdevice so this patch remove this
unnecessary inclusion.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:40:05 -02:00
Lars-Peter Clausen
da8892d410 [media] adv7604: Initialize drive strength to default when using DT
The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.

Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.

Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.

Fixes: 0e158be0162b ("adv7604: Add DT support")

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:39:40 -02:00
Bob Peterson
aacee72061 GFS2: Reduce contention on gfs2_log_lock
This patch modifies functions gfs2_trans_add_meta and _data so that
they check whether the buffer_head is already in a transaction,
and if so, avoid taking the gfs2_log_lock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-01-30 12:10:25 -05:00
Bhumika Goyal
32dd9e873b [media] media: platform: soc_camera_platform : constify v4l2_subdev_* structures
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(One of the scripts)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_core_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.core=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_core_ops i;

File size before:
    text   data	    bss	    dec	    hex	filename
    858	    576	      0	   1434	    59a soc_camera/soc_camera_platform.o

File size after:
  text	   data	    bss	    dec	    hex	filename
   1234	    192	      0	   1426	    592 soc_camera/soc_camera_platform.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:47:21 -02:00
Christophe JAILLET
a5bc63f28a [media] soc-camera: Fix a return value in case of error
If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified.
As it is not initialized either, the return value can be anything.

It is likely that returning the error code was expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:46:44 -02:00
Lars-Peter Clausen
561eb9d09a fbdev: omap/lcd: Make callbacks optional
Most OMAP FB LCD drivers don't have anything to do in their panel
callbacks. This leads to a large set of empty boilerplate functions in the
panel drivers. Make those callbacks optional by checking if they are set
before calling them. This allows those boilerplate functions to be removed.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:49 +01:00
Lars-Peter Clausen
b2c1e8a75b fbdev: omap/lcd: Staticize non-exported lcd_panel structs
None of the lcd_panel structs defined by the OMAP LCD drivers are
referenced outside of their compilation unit. Follow best practices and
mark them as static.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:49 +01:00
Lars-Peter Clausen
0ed711168a fbdev: omap/lcd: Remove no-op driver callbacks
Every single one of the OMAP fbdev LCD drivers implements no-op remove,
suspend and resume callbacks for their platform_driver. This is not
necessary as the driver core handles the case where the callbacks are not
set just fine. So they are just unnecessary boilerplate that can be
removed.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:49 +01:00
Geliang Tang
0a9aae40a6 video/mbx: use simple_open()
Drop open_file_generic(), use simple_open() instead of it.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:49 +01:00
Arvind Yadav
74a2b96e61 video: fbdev: stifb: handle NULL return value from ioremap_nocache
Add missing error check for ioremap_nocache() failure
(prevents NULL pointer dereference on error).

Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[b.zolnierkie: minor fixes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:49 +01:00
Maciej W. Rozycki
f998ff681c video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
Fix:

WARNING: drivers/video/fbdev/pmagb-b-fb.o(.text+0x6dc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_erase_cursor()
The function pmagbbfb_probe() 
references the function __init pmagbbfb_erase_cursor().
This is often because pmagbbfb_probe lacks a __init
annotation or the annotation of pmagbbfb_erase_cursor is wrong.

-- a fallout from a missed update from commit 5b1638d940 ("VIDEO: 
PMAGB-B: Fix section mismatch") and then commit 48c68c4f1b ("Drivers: 
video: remove __dev* attributes.")

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:48 +01:00
Maciej W. Rozycki
879e5a0df6 video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
Fix:

WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor()
The function pmagbafb_probe()
references the function __init pmagbafb_erase_cursor().
This is often because pmagbafb_probe lacks a __init
annotation or the annotation of pmagbafb_erase_cursor is wrong.

-- a fallout from a missed update from commit 9625b51350 ("VIDEO: 
PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b ("Drivers: 
video: remove __dev* attributes.")

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:48 +01:00
Vladimir Zapolskiy
6306b3a58c video: ARM CLCD: use panel device node for getting backlight and mode
Having obtained panel device node in clcdfb_of_init_display() it allows to
generalize and simplify two more helper functions clcdfb_of_get_backlight()
and clcdfb_of_get_mode().

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:48 +01:00
Vladimir Zapolskiy
be7367968f video: ARM CLCD: use panel device node for panel initialization
There is no necessity to pass an endpoint device node to custom panel
initialization functions, because a child panel device node should be
sufficient, note that the existing init_panel() callback declaration from
linux/amba/clcd.h already prompts to use the panel device node here.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:48 +01:00
Vladimir Zapolskiy
69550ad23d video: ARM CLCD: sort included headers out alphabetically
To simplify the task of looking through the list of included headers sort
them out alphabetically, some of the truly redundant headers are removed
from the list.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-30 17:39:48 +01:00
Sean Young
f41003a23a [media] staging: lirc_imon: port remaining usb ids to imon and remove
The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD
and two don't. The VFD code is exactly the same in the mainline imon
driver, so that part is easily ported.

The staging driver produces raw IR rather than scancodes for the four
devices, so I've ported the raw IR code from staging to mainline imon.

Now that mainline imon can handle these four devices, lirc_imon is no
longer needed.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Venky Raju <dev@venky.ws>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:34:57 -02:00
Sean Young
d48982f49b [media] staging: lirc_bt829: remove
This driver is for an old mach64 VT board, which also has a framebuffer
driver (atyfb) and userspace mach64 X driver.

It was merged in 2010 and noone has attempted to port it to rc-core,
which would be necessary to get it out of staging.

I have not been able to track down the hardware either.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Leonid Froenchenko <lfroen@galileo.co.il>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:32:11 -02:00
Sean Young
2933974cbb [media] staging: lirc_parallel: remove
The lirc_parallel driver was merged in 2010 and noone has attempted
to do the work necessary to get it out of staging (i.e. port it to
rc-core). I have not been able to find one of these devices, and
a machine with a parallel port is pretty rare too.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:29:04 -02:00
Sean Young
cc06393aae [media] staging: lirc_sir: port to rc-core
Before this driver can be moved out of staging, it should be ported
to rc-core. I've tried to make the minimum changes possible without
upsetting checkpatch.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Cc: Milan Pikula <www@fornax.sk>
Cc: Frank Przybylski <mail@frankprzybylski.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:27:40 -02:00
Sean Young
a92def1bec [media] ir-rx51: port to rc-core
This driver was written using lirc since rc-core did not support
transmitter-only hardware at that time. Now that it does, port
this driver.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:25:04 -02:00
Andi Shyti
fe052da492 [media] rc: add support for IR LEDs driven through SPI
The ir-spi is a simple device driver which supports the
connection between an IR LED and the MOSI line of an SPI device.

The driver, indeed, uses the SPI framework to stream the raw data
provided by userspace through an rc character device. The chardev
is handled by the LIRC framework and its functionality basically
provides:

 - write: the driver gets a pulse/space signal and translates it
   to a binary signal that will be streamed to the IR led through
   the SPI framework.
 - set frequency: sets the frequency whith which the data should
   be sent. This is handle with ioctl with the
   LIRC_SET_SEND_CARRIER flag (as per lirc documentation)
 - set duty cycle: this is also handled with ioctl with the
   LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles
   of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data.

The character device is created under /dev/lircX name, where X is
and ID assigned by the LIRC framework.

Example of usage:

        fd = open("/dev/lirc0", O_RDWR);
        if (fd < 0)
                return -1;

        val = 608000;
        ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val);
        if (ret < 0)
                return -1;

	val = 60;
        ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val);
        if (ret < 0)
                return -1;

        n = write(fd, buffer, BUF_LEN);
        if (n < 0 || n != BUF_LEN)
                ret = -1;

        close(fd);

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:21:20 -02:00
Andi Shyti
182c2909e2 [media] Documentation: bindings: add documentation for ir-spi device driver
Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:20:18 -02:00
Arseny Solokha
4af0e5bb95 gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
In spite of switching to paged allocation of Rx buffers, the driver still
called dma_unmap_single() in the Rx queues tear-down path.

The DMA region unmapping code in free_skb_rx_queue() basically predates
the introduction of paged allocation to the driver. While being refactored,
it apparently hasn't reflected the change in the DMA API usage by its
counterpart gfar_new_page().

As a result, setting an interface to the DOWN state now yields the following:

  # ip link set eth2 down
  fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40]
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28
  CPU: 1 PID: 189 Comm: ip Tainted: G           O    4.9.5 #1
  task: dee73400 task.stack: dede2000
  NIP: c02101e8 LR: c02101e8 CTR: c0260d74
  REGS: dede3bb0 TRAP: 0700   Tainted: G           O     (4.9.5)
  MSR: 00021000 <CE,ME>  CR: 28002222  XER: 00000000

  GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000
  GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000
  GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000
  GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540
  NIP [c02101e8] check_unmap+0x8e0/0xa28
  LR [c02101e8] check_unmap+0x8e0/0xa28
  Call Trace:
  [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable)
  [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c
  [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404
  [dede3d80] [c02e39b4] gfar_close+0x24/0xc8
  [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8
  [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c
  [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174
  [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60
  [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824
  [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298
  [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854
  [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74
  [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c
  --- interrupt: c01 at 0xff45da0
      LR = 0xff45cd0
  Instruction dump:
  811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052
  386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4
  ---[ end trace 695ae6d7ac1d0c47 ]---
  Mapped at:
   [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248
   [<c02e3ef0>] startup_gfar+0x368/0x570
   [<c036aeb4>] __dev_open+0xdc/0x150
   [<c036b1b8>] __dev_change_flags+0xa0/0x174
   [<c036b2ac>] dev_change_flags+0x20/0x60

Even though the issue was discovered in 4.9 kernel, the code in question
is identical in the current net and net-next trees.

Fixes: 75354148ce ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 11:19:37 -05:00
Andi Shyti
d5083677b3 [media] rc-ir-raw: do not generate any receiving thread for raw transmitters
Raw IR transmitters do not need any thread listening for
occurring events. Check the driver type before running the
thread.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:14:39 -02:00
Andi Shyti
d34aee1018 [media] rc-core: add support for IR raw transmitters
IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.

The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:14:12 -02:00
Andi Shyti
7ff2c2bc25 [media] rc-main: split setup and unregister functions
Move the input device allocation, map and protocol handling to
different functions.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:06:19 -02:00
Andi Shyti
0f7499fddb [media] rc-main: assign driver type during allocation
The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:59:57 -02:00
Antti Seppälä
97c129747a [media] rc: nuvoton-cir: Add support wakeup via sysfs filter callback
Nuvoton-cir utilizes the encoding capabilities of rc-core to convert
scancodes from user space to pulse/space format understood by the
underlying hardware.

Converted samples are then written to the wakeup fifo along with other
necessary configuration to enable wake up functionality.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:57:01 -02:00
James Hogan
914535c059 [media] rc: rc-loopback: Add loopback of filter scancodes
Add the s_wakeup_filter callback to the rc-loopback driver, which instead
of setting the filter just feeds the scancode back through the input
device so that it can be verified.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:56:21 -02:00
James Hogan
f423ccc1a3 [media] rc: rc-core: Add support for encode_wakeup drivers
Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true and
rc_dev::allowed_wakeup_protocols should be set to the raw IR encoders.

We also do not permit the mask to be set as we cannot generate IR
which would match that.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:55:45 -02:00
Sean Young
103293be9d [media] rc: ir-sony-decoder: Add encode capability
Add the capability to encode Sony scancodes as raw events. Sony uses
pulse length rather than pulse distance.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:54:54 -02:00
Sean Young
d35afc5fe0 [media] rc: ir-sharp-decoder: Add encode capability
Add the capability to encode Sharp scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:53:57 -02:00
Sean Young
cb981257dc [media] rc: ir-sanyo-decoder: Add encode capability
Add the capability to encode Sanyo scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:53:28 -02:00
Sean Young
d8a2ae5cbd [media] rc: ir-jvc-decoder: Add encode capability
Add the capability to encode JVC scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:52:57 -02:00
James Hogan
141cfb1432 [media] rc: ir-nec-decoder: Add encode capability
Add the capability to encode NEC scancodes as raw events. The
scancode_to_raw is pretty much taken from the img-ir NEC filter()
callback, and modulation uses the pulse distance helper added in a
previous commit.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:52:28 -02:00
Antti Seppälä
9d974e4933 [media] rc: ir-rc6-decoder: Add encode capability
Add the capability to encode RC-6 and RC-6A scancodes as raw events.

The Manchester modulation helper is used several times with various
timings so that RC-6 header preamble, the header, header trailing bit
and the data itself can be modulated correctly.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:51:34 -02:00
James Hogan
e9ab364a28 [media] rc: ir-rc5-decoder: Add encode capability
Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events.

The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.

The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:50:52 -02:00
James Hogan
caec098477 [media] rc: rc-ir-raw: Add pulse-distance modulation helper
Add IR encoding helper for pulse-distance modulation as used by the NEC
protocol.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:50:05 -02:00
Antti Seppälä
844a4f45f4 [media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper
Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:48:46 -02:00
James Hogan
3875233d0b [media] rc: rc-ir-raw: Add scancode encoder callback
Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode to a form that is more suitable for raw
hardware wake up filters.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:46:55 -02:00