commit fb646a4cd3 upstream.
The kasan sw-tags implementation contains one function that is only called
from assembler and has no prototype in a header. This causes a W=1
warning:
mm/kasan/sw_tags.c:171:6: warning: no previous prototype for 'kasan_tag_mismatch' [-Wmissing-prototypes]
171 | void kasan_tag_mismatch(unsigned long addr, unsigned long access_info,
Add a prototype in the local header to get a clean build.
Link: https://lkml.kernel.org/r/20230509145735.9263-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc0649395d upstream.
Fix an issue where the kernel would stall during netboot, showing the
"sched: RT throttling activated" message. This stall was triggered by
the behavior of the mii_interrupt bit (Bit 7 - DP83TD510E_STS_MII_INT)
in the DP83TD510E's PHY_STS Register (Address = 0x10). The DP83TD510E
datasheet (2020) states that the bit clears on write, however, in
practice, the bit clears on read.
This discrepancy had significant implications on the driver's interrupt
handling. The PHY_STS Register was used by handle_interrupt() to check
for pending interrupts and by read_status() to get the current link
status. The call to read_status() was unintentionally clearing the
mii_interrupt status bit without deasserting the IRQ pin, causing
handle_interrupt() to miss other pending interrupts. This issue was most
apparent during netboot.
The fix refrains from using the PHY_STS Register for interrupt handling.
Instead, we now solely rely on the INTERRUPT_REG_1 Register (Address =
0x12) and INTERRUPT_REG_2 Register (Address = 0x13) for this purpose.
These registers directly influence the IRQ pin state and are latched
high until read.
Note: The INTERRUPT_REG_2 Register (Address = 0x13) exists and can also
be used for interrupt handling, specifically for "Aneg page received
interrupt" and "Polarity change interrupt". However, these features are
currently not supported by this driver.
Fixes: 165cd04fe2 ("net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY")
Cc: <stable@vger.kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230621043848.3806124-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b5ea7ffb7 upstream.
With support for Ethernet PHY LEDs having been added, while
unregistering a MDIO bus and its child device liks PHYs there may be
"late" accesses to the MDIO bus. One typical use case is setting the PHY
LEDs brightness to OFF for instance.
We need to ensure that the MDIO bus controller remains entirely
functional since it runs off the main GENET adapter clock.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230617155500.4005881-1-andrew@lunn.ch/
Fixes: 9a4e796970 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230622103107.1760280-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecff6813d2 upstream.
tpm_amd_is_rng_defective is for dealing with an issue related to the
AMD firmware TPM, so on non-x86 architectures just have it inline and
return false.
Cc: stable@vger.kernel.org # v6.3+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Aneesh Kumar K. V <aneesh.kumar@linux.ibm.com>
Closes: https://lore.kernel.org/lkml/99B81401-DB46-49B9-B321-CF832B50CAC3@linux.ibm.com/
Fixes: f1324bbc40 ("tpm: disable hwrng for fTPM on some AMD designs")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83e7e5d89f upstream.
Underlying I2C bus drivers not always support longer transfers and
imx-lpi2c for instance doesn't. The fix is symmetric to previous patch
which fixed the read direction.
Cc: stable@vger.kernel.org # v5.20+
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Tested-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4032d615f upstream.
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@tuni.fi>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1c1b98962 upstream.
For Pluton TPM devices, it was assumed that there was no ACPI memory
regions. This is not true for ASUS ROG Ally. ACPI advertises
0xfd500000-0xfd5fffff.
Since remapping is already done in `crb_map_pluton`, remapping again
in `crb_map_io` causes EBUSY error:
[ 3.510453] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfd500000-0xfd5fffff]
[ 3.510463] tpm_crb: probe of MSFT0101:00 failed with error -16
Cc: stable@vger.kernel.org # v6.3+
Fixes: 4d27328827 ("tpm_crb: Add support for CRB devices based on Pluton")
Signed-off-by: Valentin David <valentin.david@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 283c5ce7da upstream.
Debounce handling is done in two different entry points in the driver.
Unify this to make sure that it's always handled the same.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f62312d04 upstream.
pinctrl-amd currently tries to program bit 19 of all GPIOs to select
either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit
19 is marked as reserved, even in the latest platforms documentation.
Drop this programming functionality.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 635a750d95 upstream.
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.
Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.
```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0007
}
```
On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d5ace1a07 upstream.
It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.
Cc: stable@vger.kernel.org
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 968ab92616 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65f6c7c91c upstream.
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
was well intentioned to mask a firmware issue on a surface laptop, but it
has a few problems:
1. It had a bug in the loop handling for iteration 63 that lead to other
problems with GPIO0 handling.
2. It disables interrupts that are used internally by the SOC but masked
by default.
3. It masked a real firmware problem in some chromebooks that should have
been caught during development but wasn't.
There has been a lot of other development around s2idle; particularly
around handling of the spurious wakeups. If there is still a problem on
the original reported surface laptop it should be avoided by adding a quirk
to gpiolib-acpi for that system instead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cf9e48ff2 upstream.
Leverage gpiochip_line_is_irq to check whether a pin has an irq
associated with it. The previous check ("irq == 0") didn't make much
sense. The irq variable refers to the pinctrl irq, and has nothing do to
with an individual pin.
On some systems, during suspend/resume cycle, the firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
Without this patch that caused an interrupt storm.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a855724dc0 upstream.
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 968ab92616 upstream.
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
commit b26cd9325b ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems. This is because there was no handling in the driver for bit
15 debounce behavior.
Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```
Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration. So align the
Linux driver to do this as well. This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 010f493d90 upstream.
If the firmware has misconfigured a GPIO it may cause interrupt
status or wake status bits to be set and not asserted. Add these
to debug output to catch this case.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75358cf331 upstream.
More fields are to be added, so to keep the display from being
too busy, adjust it.
1) Add a header to all columns
2) Except for interrupt, when fields have no data show empty
3) Remove otherwise blank whitespace
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df72b4a692 upstream.
GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in
Z state. Hence add Z-state wake control bits to debugfs output to
debug and analyze Z-states problems.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd21987274 upstream.
Also, correct the comment for NAVI10_PCIE__LC_L1_INACTIVITY_TBT_DEFAULT
as 0x0000000E stands for 400ms instead of 4ms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5df16d942 upstream.
The wptr needs to be incremented at at least 64 dword intervals,
use 256 to align with windows. This should fix potential hangs
with unaligned updates.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e5df16d942)
The path `drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c` doesn't exist in
6.1.y, only modify the file that does exist.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27655b9bb9 upstream.
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd5 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe8 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45e ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
(cherry picked from commit 27655b9bb9)
[ Dropped changes to drivers/gpu/drm/armada/armada_fbdev.c as
174c3c38e3 drm/armada: Initialize fbdev DRM client
was introduced in 6.5-rc1.
Dropped changes to exynos, msm, omapdrm, radeon, tegra drivers
as missing code these commits introduced:
99286486d6 drm/exynos: Initialize fbdev DRM client
841ef552b1 drm/msm: Initialize fbdev DRM client
9e69bcd88e drm/omapdrm: Implement fbdev emulation as in-kernel client
e317a69fe8 drm/radeon: Implement client-based fbdev emulation
9b926bcf26 drm/radeon: Only build fbdev if DRM_FBDEV_EMULATION is set
25dda38e0b drm/tegra: Initialize fbdev DRM client
8f1aaccb04 drm/gma500: Implement client-based fbdev emulation
b79fe9abd5 drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers
Move code for drm-fbdev-generic.c to matching file in 6.1.y because
these commits haven't happened in 6.1.y.
8ab59da26b drm/fb-helper: Move generic fbdev emulation into separate source file
b9c93f4ec7 drm/fbdev-generic: Rename symbols ]
Cc: alexandru.gagniuc@hp.com
Link: https://lore.kernel.org/stable/SJ0PR84MB20882EEA1ABB36F60E845E378F5AA@SJ0PR84MB2088.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66be5c48ee upstream.
Chech the session state and skip it if it's exiting.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b2dd05f107 ]
Let helper ovl_i_path_real() return the realinode to prepare for
checking non-null realinode in RCU walking path.
[msz] Use d_inode_rcu() since we are depending on the consitency
between dentry and inode being non-NULL in an RCU setting.
There are some changes from upstream commit:
1. Context conflicts caused by 73db6a063c ("ovl: port to
vfs{g,u}id_t and associated helpers") is handled.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: ffa5723c6d ("ovl: store lower path in ovl_inode")
Cc: <stable@vger.kernel.org> # v5.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e8235d28f upstream.
Added new functions index_hdr_check and index_buf_check.
Now we check all stuff for correctness while reading from disk.
Also fixed bug with stale nfs data.
Reported-by: van fantasy <g1042620637@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b8f6446b68 ]
DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.
Fix this DMA direction, and reported in Guangwu's test.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e337087c3 ]
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25369891fc ]
Two parameters can be transformed into netlink policies and
validated while parsing the netlink message.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3e337087c3 ("net/sched: sch_qfq: account for stab overhead in qfq_enqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f4626cd04 ]
If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.
Fixes: e3ec7017f6 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 150e33e62c ]
Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------
Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.
[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/
v1 -> v2: Fix commit message
Fixes: d4b36210c2 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72207a5c0 ]
The simple_write_to_buffer() function is designed to handle partial
writes. It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied. This code doesn't check the
return properly. We only know that the first byte is written, the rest
of the buffer might be uninitialized.
There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function. Just use memdup_user() and copy the whole
buffer.
Fixes: d3cbb907ae ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b690e266da ]
lkp reports below sparse warning when building for RV32:
arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from
constant value (100000000 becomes 0)
IMO, the reason we didn't see this truncates bug in real world is "0"
means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW
with more than 4GB memory.
Fix it anyway to make sparse happy.
Fixes: decf89f86e ("riscv: try to allocate crashkern region from 32bit addressible memory")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/
Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3f87278bc ]
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9373771aae ]
Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.
drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org
Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18bddc5b67 ]
DAX can be used to share page cache between VMs, reducing guest memory
overhead. And chunk based data format is widely used for VM and
container image. So enable dax support for it, make erofs better used
for VM scenarios.
Fixes: c5aa903a59 ("erofs: support reading chunk-based uncompressed files")
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230711062130.7860-1-yinxin.x@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8191213a58 ]
z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
- For example:
- offset = 0x400160000
- end = 0x370
- map->m_la = 0x160370
- offset + end - map->m_la = 0x400000000
- offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
- Expected result:
- cur = 0
- Actual result:
- cur = 0x370
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 936aa701d8 ]
z_erofs_pcluster_readmore() may take a long time to loop when the page
offset is large enough, which is unnecessary should be prevented.
For example, when the following case is encountered, it will loop 4691368
times, taking about 27 seconds:
- offset = 19217289215
- inode_size = 1442672
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 386292919c ("erofs: introduce readmore decompression strategy")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710042531.28761-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8278ee2a26 ]
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.
Fixes: dce677da57 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 113899c266 ]
Commit a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.
No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f08)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c413188c6 ]
If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c56fb2aab2 ]
In order to generate the prologue and epilogue, the BPF JIT needs to
know which registers that are clobbered. Therefore, the during
pre-final passes, the prologue is generated after the body of the
program body-prologue-epilogue. Then, in the final pass, a proper
prologue-body-epilogue JITted image is generated.
This scheme has worked most of the time. However, for some large
programs with many jumps, e.g. the test_kmod.sh BPF selftest with
hardening enabled (blinding constants), this has shown to be
incorrect. For the final pass, when the proper prologue-body-epilogue
is generated, the image has not converged. This will lead to that the
final image will have incorrect jump offsets. The following is an
excerpt from an incorrect image:
| ...
| 3b8: 00c50663 beq a0,a2,3c4 <.text+0x3c4>
| 3bc: 0020e317 auipc t1,0x20e
| 3c0: 49630067 jalr zero,1174(t1) # 20e852 <.text+0x20e852>
| ...
| 20e84c: 8796 c.mv a5,t0
| 20e84e: 6422 c.ldsp s0,8(sp) # Epilogue start
| 20e850: 6141 c.addi16sp sp,16
| 20e852: 853e c.mv a0,a5 # Incorrect jump target
| 20e854: 8082 c.jr ra
The image has shrunk, and the epilogue offset is incorrect in the
final pass.
Correct the problem by always generating proper prologue-body-epilogue
outputs, which means that the first pass will only generate the body
to track what registers that are touched.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230710074131.19596-1-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
