Introduce a variant on XFS_SCRUB_METADATA that allows for a vectored
mode. The caller specifies the principal metadata object that they want
to scrub (allocation group, inode, etc.) once, followed by an array of
scrub types they want called on that object. The kernel runs the scrub
operations and writes the output flags and errno code to the
corresponding array element.
A new pseudo scrub type BARRIER is introduced to force the kernel to
return to userspace if any corruptions have been found when scrubbing
the previous scrub types in the array. This enables userspace to
schedule, for example, the sequence:
1. data fork
2. barrier
3. directory
If the data fork scrub is clean, then the kernel will perform the
directory scrub. If not, the barrier in 2 will exit back to userspace.
The alternative would have been an interface where userspace passes a
pointer to an empty buffer, and the kernel formats that with
xfs_scrub_vecs that tell userspace what it scrubbed and what the outcome
was. With that the kernel would have to communicate that the buffer
needed to have been at least X size, even though for our cases
XFS_SCRUB_TYPE_NR + 2 would always be enough.
Compared to that, this design keeps all the dependency policy and
ordering logic in userspace where it already resides instead of
duplicating it in the kernel. The downside of that is that it needs the
barrier logic.
When running fstests in "rebuild all metadata after each test" mode, I
observed a 10% reduction in runtime due to fewer transitions across the
system call boundary.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the transaction allocation in the !orphanage_available case of
xrep_nlinks_repair_inode fails, we need to drop the IOLOCK of the file
being scrubbed before exiting.
Found by fuzzing u3.sfdir3.list[1].name = zeroes in xfs/1546.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Back when I wrote commit a03297a0ca, I had thought that we'd be doing
users a favor by only marking inodes dontcache at the end of a scrub
operation, and only if there's only one reference to that inode. This
was more or less true back when I_DONTCACHE was an XFS iflag and the
only thing it did was change the outcome of xfs_fs_drop_inode to 1.
Note: If there are dentries pointing to the inode when scrub finishes,
the inode will have positive i_count and stay around in cache until
dentry reclaim.
But now we have d_mark_dontcache, which cause the inode *and* the
dentries attached to it all to be marked I_DONTCACHE, which means that
we drop the dentries ASAP, which drops the inode ASAP.
This is bad if scrub found problems with the inode, because now they can
be scheduled for inactivation, which can cause inodegc to trip on it and
shut down the filesystem.
Even if the inode isn't bad, this is still suboptimal because phases 3-7
each initiate inode scans. Dropping the inode immediately during phase
3 is silly because phase 5 will reload it and drop it immediately, etc.
It's fine to mark the inodes dontcache, but if there have been accesses
to the file that set up dentries, we should keep them.
I validated this by setting up ftrace to capture xfs_iget_recycle*
tracepoints and ran xfs/285 for 30 seconds. With current djwong-wtf I
saw ~30,000 recycle events. I then dropped the d_mark_dontcache calls
and set XFS_IGET_DONTCACHE, and the recycle events dropped to ~5,000 per
30 seconds.
Therefore, grab the inode with XFS_IGET_DONTCACHE, which only has the
effect of setting I_DONTCACHE for cache misses. Remove the
d_mark_dontcache call that can happen in xchk_irele.
Fixes: a03297a0ca ("xfs: manage inode DONTCACHE status at irele time")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Repair corruptions in the directory tree itself. Cycles are broken by
removing an incoming parent->child link. Multiply-owned directories are
fixed by pruning the extra parent -> child links Disconnected subtrees
are reconnected to the lost and found.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the scrub ioctl handler to scrub.c to keep the code together and to
reduce unnecessary code when CONFIG_XFS_ONLINE_SCRUB=n.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Report directories that are the source of corruption in the directory
tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We really don't want to call cond_resched every single time we go
through a loop in scrub -- there may be billions of records, and probing
into the scheduler itself has overhead. Reduce this overhead by only
calling cond_resched 10x per second; and add a counter so that we only
check jiffies once every 1000 records or so.
Surprisingly, this reduces scrub-only fstests runtime by about 2%. I
used the bmapinflate xfs_db command to produce a billion-extent file and
this stupid gadget reduced the scrub runtime by about 4%.
From a stupid microbenchmark of calling these things 1 billion times, I
estimate that cond_resched costs about 5.5ns per call; jiffes costs
about 0.3ns per read; and fatal_signal_pending costs about 0.4ns per
call.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The runtime parent pointer update code expects that any file being moved
around the directory tree already has an attr fork. However, if we had
to rebuild an inode core record, there's a chance that we zeroed forkoff
as part of the inode to pass the iget verifiers.
Therefore, if we performed any repairs on an inode core, ensure that the
inode has a nonzero forkoff before unlocking the inode.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a dirent update hook so that we can detect directory tree updates
that affect any of the paths found by this scrubber and force it to
rescan.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since the parent pointer scrubber does not exhaustively search the
filesystem for missing parent pointers, it doesn't have a good way to
determine that there are pointers missing from an otherwise uncorrupt
xattr structure. Instead, for nondirectories it employs a heuristic of
comparing the file link count to the number of parent pointers found.
However, we don't want this heuristic flagging a false corruption after
a repair has actually scanned the entire filesystem to rebuild the
parent pointers. Therefore, reset the file link count in this one case
because we actually know the correct link count.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new scrubber that detects corruptions within the directory tree
structure itself. It can detect directories with multiple parents;
loops within the directory tree; and directory loops not accessible from
the root.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Adapt the orphanage's adoption code to update the child file's parent
pointers as part of the reparenting process. Also ensure that the child
has an attr fork to receive the parent pointer update, since the runtime
code assumes one exists.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Once we've assembled all the parent pointers for a file, we need to
commit the new dataset atomically to that file. Parent pointer records
are embedded in the xattr structure, which means that we must write a
new extended attribute structure, again, atomically. Therefore, we must
copy the non-parent-pointer attributes from the file being repaired into
the temporary file's extended attributes and then call the atomic extent
swap mechanism to exchange the blocks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a second callback function to xchk_xattr_walk so that we can do
something in between attr leaf blocks. This will be used by the next
patch to see if we should flush cached parent pointer updates to
constrain memory usage.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Split this function into two pieces -- one to make the actual changes to
the inode core to add the attr fork, and another one to deal with
getting the transaction and locking the inodes.
The next couple of patches will need this to be split into two. One
patch implements committing new parent pointer recordsets to damaged
files. If one file has an attr fork and the other does not, we have to
create the missing attr fork before the atomic swap transaction, and can
use the behavior encoded in the current xfs_bmap_add_attrfork.
The second patch adapts /lost+found adoptions to handle parent pointers
correctly. The adoption process will add a parent pointer to a child
that is being moved to /lost+found, but this requires that the attr fork
already exists. We don't know if we're actually going to commit the
adoption until we've already reserved a transaction and taken the
ILOCKs, which means that we must have a way to bypass the start of the
current xfs_bmap_add_attrfork.
Therefore, create xfs_attr_add_fork as the helper that creates a
transaction and takes locks; and make xfs_bmap_add_attrfork the function
that updates the inode core and allocates the incore attr fork.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove this assertion about the inode not having an attr fork from
xfs_bmap_add_attrfork because the function handles that case just fine.
Weirder still, the function actually /requires/ the caller not to hold
the ILOCK, which means that its accesses are not stabilized.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While we're scanning the filesystem for dirents that we can turn into
parent pointers, we cannot hold the IOLOCK or ILOCK of the file being
repaired. Therefore, we need to set up a dirent hook so that we can
keep the temporary file's parent pionters up to date with the rest of
the filesystem. Hence we add the ability to *remove* pptrs from the
temporary file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If parent pointers are enabled on the filesystem, we can repair the
entire dataset by walking the directories of the filesystem looking for
dirents that we can turn into parent pointers. Once we have a full
incore dataset, we'll figure out what to do with it, but that's for a
subsequent patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are a few places where the extended attribute repair code drops
the ILOCK to apply stashed xattrs to the temporary file. Although
setxattr and removexattr are still locked out because we retain our hold
on the IOLOCK, this doesn't prevent renames from updating parent
pointers, because the VFS doesn't take i_rwsem on children that are
being moved.
Therefore, set up a dirent hook to capture parent pointer updates for
this file, and replay(?) the updates.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While we're scanning the filesystem for parent pointers that we can turn
into dirents, we cannot hold the IOLOCK or ILOCK of the directory being
repaired. Therefore, we need to set up a dirent hook so that we can
keep the temporary directory up to date with the rest of the filesystem.
Hence we add the ability to *remove* entries from the temporary dir.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For filesystems with parent pointers, scan the entire filesystem looking
for parent pointers that target the directory we're rebuilding instead
of trying to salvage whatever we can from the directory data blocks.
This will be more robust than salvaging, but there's more code to come.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move disabling of the vdd-pdphy supply to the start() function which
enabled it for symmetry and to make sure that it is disabled as intended
in all error paths of pmic_typec_pdphy_reset() (i.e. not just when
qcom_pmic_typec_pdphy_enable() fails).
Cc: stable+noautosel@kernel.org # Not needed in any stable release, just a minor bugfix
Fixes: a4422ff221 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240418145730.4605-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to stop and deregister the port in case of late probe errors
to avoid use-after-free issues when the underlying memory is released by
devres.
Fixes: a4422ff221 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable@vger.kernel.org # 6.5
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240418145730.4605-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the USB driver passes a pointer into the TRB buffer for creq, this
buffer can be overwritten with the status response as soon as the event
is queued. This can make the final check return USB_GADGET_DELAYED_STATUS
when it shouldn't. Instead use the stored wLength.
Fixes: 4d644abf25 ("usb: gadget: f_fs: Only return delayed status when len is 0")
Cc: stable <stable@kernel.org>
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Testing with KASAN and syzkaller revealed a bug in port.c:disable_store():
usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to
is concurrently removed, but the function does not check for this
possibility before dereferencing the returned value.
It turns out that the first dereference is unnecessary, since hub->intfdev
is the parent of the port device, so it can be changed easily. Adding a
check for hub == NULL prevents further problems.
The same bug exists in the disable_show() routine, and it can be fixed the
same way.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Link: https://lore.kernel.org/linux-usb/CAEkJfYON+ry7xPx=AiLR9jzUNT+i_Va68ACajOC3HoacOfL1ig@mail.gmail.com/
Fixes: f061f43d74 ("usb: hub: port: add sysfs entry to switch port power")
CC: Michael Grzeschik <m.grzeschik@pengutronix.de>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/393aa580-15a5-44ca-ad3b-6462461cd313@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared
during initialization. Suspend during initialization can result in
undefined behavior due to clock synchronization failure, which often
seen as core soft reset timeout.
The programming guide recommended these bits to be cleared during
initialization for DWC_usb3.0 version 1.94 and above (along with
DWC_usb31 and DWC_usb32). The current check in the driver does not
account if it's set by default setting from coreConsultant.
This is especially the case for DRD when switching mode to ensure the
phy clocks are available to change mode. Depending on the
platforms/design, some may be affected more than others. This is noted
in the DWC_usb3x programming guide under the above registers.
Let's just disable them during driver load and mode switching. Restore
them when the controller initialization completes.
Note that some platforms workaround this issue by disabling phy suspend
through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when
they should not need to.
Cc: stable@vger.kernel.org
Fixes: 9ba3aca8fe ("usb: dwc3: Disable phy suspend after power-on reset")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes uvc gadget support on 32-bit platforms.
Commit 0df28607c5 ("usb: gadget: uvc: Generalise helper functions for
reuse") introduced a helper function __uvcg_iter_item_entries() to aid
with parsing lists of items on configfs attributes stores. This function
is a generalization of another very similar function, which used a
stack-allocated temporary buffer of fixed size for each item in the list
and used the sizeof() operator to check for potential buffer overruns.
The new function was changed to allocate the now variably sized temp
buffer on heap, but wasn't properly updated to also check for max buffer
size using the computed size instead of sizeof() operator.
As a result, the maximum item size was 7 (plus null terminator) on
64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just
barely enough, 3 is definitely too small for some of UVC configfs
attributes. For example, dwFrameInteval, specified in 100ns units,
usually has 6-digit item values, e.g. 166666 for 60fps.
Cc: stable@vger.kernel.org
Fixes: 0df28607c5 ("usb: gadget: uvc: Generalise helper functions for reuse")
Signed-off-by: Ivan Avdeev <me@provod.works>
Link: https://lore.kernel.org/r/20240413150124.1062026-1-me@provod.works
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert USB UHCI bindings to DT schema. Documenting aspeed compatibles
and missing properties. Adding aspeed/generic-uhci example and fixing
nodename for the original example.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423150550.91055-1-sheharyaar48@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update Qualcomm PMIC Type-C examples to follow the USB-C connector
schema. The USB-C connector should have three ports (USB HS @0,
SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
connected to the SBU mux (e.g. FSA4480).
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240418-typec-fix-example-v3-1-08f649b6f368@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OS descriptors logic had the high/low byte of w_value inverted, causing
the extended properties to not be accessible for interface != 0.
>From the Microsoft documentation:
https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification
OS_Desc_CompatID.doc (w_index = 0x4):
- wValue:
High Byte = InterfaceNumber. InterfaceNumber is set to the number of the
interface or function that is associated with the descriptor, typically
0x00. Because a device can have only one extended compat ID descriptor,
it should ignore InterfaceNumber, regardless of the value, and simply
return the descriptor.
Low Byte = 0. PageNumber is used to retrieve descriptors that are larger
than 64 KB. The header section is 16 bytes, so PageNumber is set to 0 for
this request.
We currently do not support >64KB compat ID descriptors, so verify that the
low byte is 0.
OS_Desc_Ext_Prop.doc (w_index = 0x5):
- wValue:
High byte = InterfaceNumber. The high byte of wValue is set to the number
of the interface or function that is associated with the descriptor.
Low byte = PageNumber. The low byte of wValue is used to retrieve
descriptors that are larger than 64 KB. The header section is 10 bytes, so
PageNumber is set to 0 for this request.
We also don't support >64KB extended properties, so verify that the low byte
is 0 and use the high byte for the interface number.
Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240404100635.3215340-1-peter@korsgaard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FFS based applications can utilize the aio_cancel() callback to dequeue
pending USB requests submitted to the UDC. There is a scenario where the
FFS application issues an AIO cancel call, while the UDC is handling a
soft disconnect. For a DWC3 based implementation, the callstack looks
like the following:
DWC3 Gadget FFS Application
dwc3_gadget_soft_disconnect() ...
--> dwc3_stop_active_transfers()
--> dwc3_gadget_giveback(-ESHUTDOWN)
--> ffs_epfile_async_io_complete() ffs_aio_cancel()
--> usb_ep_free_request() --> usb_ep_dequeue()
There is currently no locking implemented between the AIO completion
handler and AIO cancel, so the issue occurs if the completion routine is
running in parallel to an AIO cancel call coming from the FFS application.
As the completion call frees the USB request (io_data->req) the FFS
application is also referencing it for the usb_ep_dequeue() call. This can
lead to accessing a stale/hanging pointer.
commit b566d38857 ("usb: gadget: f_fs: use io_data->status consistently")
relocated the usb_ep_free_request() into ffs_epfile_async_io_complete().
However, in order to properly implement locking to mitigate this issue, the
spinlock can't be added to ffs_epfile_async_io_complete(), as
usb_ep_dequeue() (if successfully dequeuing a USB request) will call the
function driver's completion handler in the same context. Hence, leading
into a deadlock.
Fix this issue by moving the usb_ep_free_request() back to
ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req
to NULL after freeing it within the ffs->eps_lock. This resolves the race
condition above, as the ffs_aio_cancel() routine will not continue
attempting to dequeue a request that has already been freed, or the
ffs_user_copy_work() not freeing the USB request until the AIO cancel is
done referencing it.
This fix depends on
commit b566d38857 ("usb: gadget: f_fs: use io_data->status
consistently")
Fixes: 2e4c7553cd ("usb: gadget: f_fs: add aio support")
Cc: stable <stable@kernel.org> # b566d38857 ("usb: gadget: f_fs: use io_data->status consistently")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240409014059.6740-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In V3D, the conclusion of a job is indicated by a IRQ. When a job
finishes, then we update the local and the global GPU stats of that
queue. But, while the GPU stats are being updated, a user might be
reading the stats from sysfs or fdinfo.
For example, on `gpu_stats_show()`, we could think about a scenario where
`v3d->queue[queue].start_ns != 0`, then an interrupt happens, we update
the value of `v3d->queue[queue].start_ns` to 0, we come back to
`gpu_stats_show()` to calculate `active_runtime` and now,
`active_runtime = timestamp`.
In this simple example, the user would see a spike in the queue usage,
that didn't match reality.
In order to address this issue properly, use a seqcount to protect read
and write sections of the code.
Fixes: 09a93cc4f7 ("drm/v3d: Implement show_fdinfo() callback for GPU usage stats")
Reported-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-7-mcanal@igalia.com
Create a function to decouple the stats calculation from the printing.
This will be useful in the next step when we add a seqcount to protect
the stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-6-mcanal@igalia.com
Given a set of GPU stats, that is, a `struct v3d_stats` related to a
queue in a given context, create a function that can update this set
of GPU stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-5-mcanal@igalia.com
This will make it easier to instantiate the GPU stats variables and it
will create a structure where we can store all the variables that refer
to GPU stats.
Note that, when we created the struct `v3d_stats`, we renamed
`jobs_sent` to `jobs_completed`. This better express the semantics of
the variable, as we are only accounting jobs that have been completed.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-4-mcanal@igalia.com
Currently, we manually perform all operations to update the GPU stats
variables. Apart from the code repetition, this is very prone to errors,
as we can see on commit 35f4f8c9fc ("drm/v3d: Don't increment
`enabled_ns` twice").
Therefore, create two functions to manage updating all GPU stats
variables. Now, the jobs only need to call for `v3d_job_update_stats()`
when the job is done and `v3d_job_start_stats()` when starting the job.
Co-developed-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-3-mcanal@igalia.com
Nobody checks the error flag on isofs folios, so stop setting and
clearing it.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240420025029.2166544-14-willy@infradead.org>
Nobody checks this flag on ext2 folios, stop setting it.
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240420025029.2166544-10-willy@infradead.org>
This patch fixes to return -ENOMEM in case of an allocation failure that
was forgotten to change in commit 6c648035cb ("dlm: switch to use
rhashtable for rsbs").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202404200536.jGi6052v-lkp@intel.com/
Fixes: 6c648035cb ("dlm: switch to use rhashtable for rsbs")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We enumerate devices by attempting config reads to the Vendor ID of each
possible device. On conventional PCI, if no device responds, the read
terminates with a Master Abort (PCI r3.0, sec 6.1). On PCIe, the config
read is terminated as an Unsupported Request (PCIe r6.0, sec 2.3.2,
7.5.1.3.7). In either case, if the read addressed a device below a bridge,
it is logged by setting "Received Master Abort" in the bridge Secondary
Status register.
Clear any errors logged in the Secondary Status register after enumeration.
Link: https://lore.kernel.org/r/20240116143258.483235-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: simplify commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Support the following ioctls for CDX devices:
- VFIO_DEVICE_GET_IRQ_INFO
- VFIO_DEVICE_SET_IRQS
This allows user to set an eventfd for cdx device interrupts and
trigger this interrupt eventfd from userspace.
All CDX device interrupts are MSIs. The MSIs are allocated from the
CDX-MSI domain.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20240423111021.1686144-2-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
MSI functions for allocation and free can be directly used by
the device drivers without any wrapper provided by bus drivers.
So export these MSI functions.
Also, add a wrapper API to allocate MSIs providing only the
number of interrupts rather than range for simpler driver usage.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423111021.1686144-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
It doesn't appear that the configuration is for the HFPLL is generic, so
add a qcs404-specific compatible and rename the existing struct to
qcs404.
Keep qcom,hfpll in the driver for compatibility with old dtbs.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-2-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the .txt documentation to .yaml with some adjustments.
* APQ8064/IPQ8064/MSM8960 compatibles are dropped since their HFPLLs are
a part of GCC so there is no need for a separate compat entry.
* Change the MSM8974 compatible to follow the updated naming schema.
Theis compatible is not used upstream yet.
* Add qcs404-hfpll. QCS404 currently uses qcom,hfpll. Mark that as
deprecated since every SoC appears to need different driver data so
"qcom,hfpll" makes no sense to keep
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-1-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the VBUS regulator used on Qualcomm platforms (RB1, RB2, RB5) to
supply VBUS voltage to the USB-C connector.
Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240325-arm64-config-usb-vbus-v1-1-d14601f81d08@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Notice that the passive field in struct thermal_zone_device is not
used by the Power Allocator governor itself and so the ordering of
its updates with respect to allow_maximum_power() or allocate_power()
does not matter.
Accordingly, make power_allocator_manage() update that field right
before returning, which allows the current value of it to be passed
directly to allow_maximum_power() without using the additional update
variable that can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The Power Allocator governor really only wants to be called once per
thermal zone update and it does a special check to skip the extra,
from its perspective, invocations of the .throttle() callback.
Make it use .manage() instead of .throttle().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
