Move the data path Tx and Rx descriptor primary page table CMEM
configuration into a helper function. This will make the code more
scalable for configuring partner device in support of multi-device MLO.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240411102226.4045323-5-quic_periyasa@quicinc.com
In the hardware cookie conversion table configuration, place the Rx
descriptor at the end. This will allow for easier addition of partner
device Rx descriptors in the future to support multi-device MLO.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240411102226.4045323-4-quic_periyasa@quicinc.com
Currently, the Rx descriptor is placed before the Tx descriptor in the
primary page table of the hardware cookie conversion configuration. The
Tx and Rx descriptor offsets are implicitly hardcoded. To allow for easy
displacement of Tx and Rx descriptors, introduce Tx and Rx offset based
cookie conversion initializationi. Additionally, should consider
validating the respective offset ranges while retrieving the Tx and Rx
descriptors. This change will be utilize by the next patch in the series.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240411102226.4045323-3-quic_periyasa@quicinc.com
Currently, in the Rx data path cookie conversion initialization procedure,
the primary page table index (ppt_idx) is computed within the secondary
page table iteration. However this is invariant, and hence the ppt_idx
should be calculated outside of the iteration to avoid repeated execution
of the statement.
Found in code review.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240411102226.4045323-2-quic_periyasa@quicinc.com
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZiJiwyIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kLugBAOcLTOwWAJn7
D4YFSSN/ak9ycnNeD+ixIgjTAttrJrTYAP4s3hitW4k0P6rhGbAjYGlOvKNk4fbx
M4MxokoXVd0gDw==
=fWyC
-----END PGP SIGNATURE-----
Merge tag 'tags/media-next-uvc-20240419' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage
uvcvideo fixes:
Ricardo Ribalda (3):
media: uvcvideo: Add quirk for Logitech Rally Bar
media: uvcvideo: Fix power line control for Shine-Optics Camera
media: uvcvideo: Disable autosuspend for Insta360 Link
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240419125149.GA2125@pendragon.ideasonboard.com/
Add description for 'struct regmap *cci' member of struct imx335.
This will fix the following compile-time warning:
warning: Function parameter or struct member 'cci' not described in 'imx335'
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was possible to have pick_eevdf() return NULL, which then causes a
NULL-deref. This turned out to be due to entity_eligible() returning
falsely negative because of a s64 multiplcation overflow.
Specifically, reweight_eevdf() computes the vlag without considering
the limit placed upon vlag as update_entity_lag() does, and then the
scaling multiplication (remember that weight is 20bit fixed point) can
overflow. This then leads to the new vruntime being weird which then
causes the above entity_eligible() to go side-ways and claim nothing
is eligible.
Thus limit the range of vlag accordingly.
All this was quite rare, but fatal when it does happen.
Closes: https://lore.kernel.org/all/ZhuYyrh3mweP_Kd8@nz.home/
Closes: https://lore.kernel.org/all/CA+9S74ih+45M_2TPUY_mPPVDhNvyYfy1J1ftSix+KjiTVxg8nw@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/202401301012.2ed95df0-oliver.sang@intel.com/
Fixes: eab03c23c2 ("sched/eevdf: Fix vruntime adjustment on reweight")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: Igor Raits <igor@gooddata.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240422082238.5784-1-xuewen.yan@unisoc.com
reweight_eevdf() only keeps V unchanged inside itself. When se !=
cfs_rq->curr, it would be dequeued from rb tree first. So that V is
changed and the result is wrong. Pass the original V to reweight_eevdf()
to fix this issue.
Fixes: eab03c23c2 ("sched/eevdf: Fix vruntime adjustment on reweight")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
[peterz: flip if() condition for clarity]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
reweight_eevdf() needs the latest V to do accurate calculation for new
ve and vd. So update V unconditionally when se is runnable.
Fixes: eab03c23c2 ("sched/eevdf: Fix vruntime adjustment on reweight")
Suggested-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b81 ("bridge: cfm: Netlink Notifications.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 1eeb504357 ("tcp/dccp: do not care about
families in inet_twsk_purge()") tcp_twsk_purge() is
no longer potentially called from a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new sysfs attribute, ap_config, for the vfio_ap driver is
documented.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-6-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's
matrix masks with the given set of masks. If the given state cannot
be set, then no changes are made to the vfio-ap mediated device.
The format of the data written to ap_config is as follows:
{amask},{dmask},{cmask}\n
\n is a newline character.
amask, dmask, and cmask are masks identifying which adapters, domains,
and control domains should be assigned to the mediated device.
The format of a mask is as follows:
0xNN..NN
Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
The leftmost (highest order) bit represents adapter/domain 0.
For an example set of masks that represent your mdev's current
configuration, simply cat ap_config.
This attribute is intended to be used by an mdevctl callout script
supporting the mdev type vfio_ap-passthrough to atomically update a
vfio-ap mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-5-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
vfio_ap_mdev_link_queue is changed to detect if a matrix_mdev has
already linked the given queue. If so, it bails out.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-4-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add ap_config sysfs attribute. This will provide the means for
setting or displaying the adapters, domains and control domains assigned
to the vfio-ap mediated device in a single operation. This sysfs
attribute is comprised of three masks: One for adapters, one for domains,
and one for control domains.
This attribute is intended to be used by mdevctl to query a vfio-ap
mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-3-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rename hex2bitmap() to ap_hex2bitmap() and export it for external
use. This function will be used by the implementation of the vfio-ap
ap_config sysfs attribute.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-2-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.
The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().
Fixes: 3afdfca698 ("s390/mm: Clear skeys for newly mapped huge guest pmds")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-3-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. I.e. end - start
should be the size of the area to be initialized.
The current code works because __storage_key_init_range() will still loop
over every page in the range, but it is slower than using sske_frame().
Fixes: 964c2c05c9 ("s390/mm: Clear huge page storage keys on enable_skey")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416114220.28489-2-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Resource selector pair 0 is always implemented and reserved. We must not
touch it, even during save/restore for CPU Idle. Rest of the driver is
well behaved. Fix the offending ones.
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20240412142702.2882478-5-suzuki.poulose@arm.com
ETM4x implements TRCQCLTR only when the Q elements are supported
and the Q element filtering is supported (TRCIDR0.QFILT). Access
to the register otherwise could be fatal. Fix this by tracking the
availability, like the others.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-4-suzuki.poulose@arm.com
ETM4x doesn't support Data trace on A class CPUs. As such do not access the
Data trace control registers during CPU idle. This could cause problems for
ETE. While at it, remove all references to the Data trace control registers.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-3-suzuki.poulose@arm.com
When we restore the register state for ETM4x, while coming back
from CPU idle, we hardcode IOMEM access. This is wrong and could
blow up for an ETM with system instructions access (and for ETE).
Fixes: f5bd523690 ("coresight: etm4x: Convert all register accesses")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-2-suzuki.poulose@arm.com
Define my kernel.org address to be the canonical one, and add mailmap
entries for the various addresses (including typos) that have been
used over the years.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
i.MX95 has BLK CTL modules in various MIXes, the BLK CTL modules
support clock features such as mux/gate/div. This patch
is to add the clock feature of BLK CTL modules
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-4-84d4eca1e759@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
i.MX95 DISPLAY_MASTER_CSR includes registers to control DSI clock settings,
clock gating, and pixel link select. Add dt-schema for it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-3-84d4eca1e759@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
i.MX95 includes BLK CTL module in several MIXes, such as VPU_CSR in
VPUMIX, CAMERA_CSR in CAMERAMIX and etc.
The BLK CTL module is used for various settings of a specific MIX, such
as clock, QoS and etc.
This patch is to add some BLK CTL modules that has clock features.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-2-84d4eca1e759@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
New CPU #defines encode vendor and family as well as model.
Update the example usage comment in arch/x86/kernel/cpu/match.c
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-4-tony.luck@intel.com
To avoid adding a slew of new macros for each new Intel CPU family
switch over from providing CPU model number #defines to a new
scheme that encodes vendor, family, and model in a single number.
[ bp: s/casted/cast/g ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-3-tony.luck@intel.com
Refactor struct cpuinfo_x86 so that the vendor, family, and model
fields are overlaid in a union with a 32-bit field that combines
all three (together with a one byte reserved field in the upper
byte).
This will make it easy, cheap, and reliable to check all three
values at once.
See
https://lore.kernel.org/r/Zgr6kT8oULbnmEXx@agluck-desk3
for why the ordering is (low-to-high bits):
(vendor, family, model)
[ bp: Move comments over the line, add the backstory about the
particular order of the fields. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-2-tony.luck@intel.com
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the avdd regulator itself.
Add support for having the driver control the sensor's avdd regulator.
Note this relies on the regulator-core providing a dummy regulator
(which it does by default) on platforms where Linux is not aware of
the avdd regulator.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the sensor's clock itself.
Add support for having the driver control an optional clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the reset GPIO itself.
Add support for having the driver control an optional reset GPIO.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ipu bridge, endpoints may only be created when ipu bridge has
initialised. This may happen after the sensor driver has first probed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add camera orientation and sensor rotation controls using
the v4l2_fwnode_device_parse() and v4l2_ctrl_new_fwnode_properties()
helpers.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add hblank control so that the sensor has all the mandatory
controls for libcamera.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add vblank control to allow changing the framerate /
higher exposure values.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The hts, vts ov2680_mode struct members always contain
OV2680_PIXELS_PER_LINE resp. OV2680_LINES_PER_FRAME,
drop them and simply use these values directly.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to send OV2680_END_MARGIN extra columns on top of
the mode width and the same for sending extra lines over the mode height.
This sending of extra lines/columns was inherited from the atomisp
ov2680 driver, it is unclear why this was done and this complicates
adding V4L2_CID_VBLANK support, so remove it.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since commit 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 driver no longer probes when the
'data-lanes' property is absent.
The OV2680 sensor has only one data lane, so there is no need for
describing it the devicetree.
Remove the unnecessary data-lanes property check.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint property verification")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The sensor gain (both analog and digital) are controlled by a
single gain value where:
- 0dB to 30dB correspond to analog gain
- 30.3dB to 72dB correspond to digital gain
(with 0.3dB step)
Hence, limit the analogue gain value to 100.
For digital gain, support can be added later if needed.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx335 reports a recommended pixel area of - 2592x1944.
The driver supported mode however limits it to height=1940.
Fix the height discrepency by correctly the value of height
(with updates to vblank and mode registers).
The IMX335_REG_HTRIMMING should also be corrected to the start
offset(i.e. 48) instead of chosing a abritrary crop start of 384.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Consider integer values for registers that are related to various
sizes in the register map. This helps in improving the overall
readability.
No functional changes intended in this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the new comon CCI register access helpers to replace the private
register access helpers in the imx335 driver.
Select V4L2_CCI_I2C Kconfig option which the imx335 driver now
depends on.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Call the V4L2 fwnode device parser to handle controls that are
standardised by the framework.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The IMX335 can support both 2 and 4 lane configurations.
Extend the driver to configure the lane mode accordingly.
Update the pixel rate depending on the number of lanes in use.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fixup missing : in @lane_mode kerneldoc line]
If the control handler is in an error state, return that error immediately
in v4l2_ctrl_new_fwnode_properties(). Effectively the change here is that
the same error code (handler's error) is returned in all cases instead of
possibly returning -EINVAL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the current firmware path in linux-firmware repository. Check the
older paths still in order to avoid causing issues to the users.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Turn on the privacy LED only if streamon succeeds. This can be done after
enabling streaming on the sensor.
Fixes: b6e10ff6c2 ("media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After the frame is submitted to DMA, it may happen that the submitted
list is not updated soon enough, and the DMA callback is triggered
before that.
This can lead to kernel crashes, so move everything in a single
lock/unlock section to prevent such races.
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>