Unsupported filesystems currently do not enforce any signatures. Add
support for signature enforcement of the "original" and "portable &
immutable" signatures when EVM_INIT_X509 is enabled.
The "original" signature type contains filesystem specific metadata.
Thus it cannot be copied up and verified. However with EVM_INIT_X509
and EVM_ALLOW_METADATA_WRITES enabled, the "original" file signature
may be written.
When EVM_ALLOW_METADATA_WRITES is not set or once it is removed from
/sys/kernel/security/evm by setting EVM_INIT_HMAC for example, it is not
possible to write or remove xattrs on the overlay filesystem.
This change still prevents EVM from writing HMAC signatures on
unsupported filesystem when EVM_INIT_HMAC is enabled.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Force a file's integrity to be re-evaluated on file metadata change by
resetting both the IMA and EVM status flags.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On stacked filesystem the metadata inode may be different than the one
file data inode and therefore changes to it need to be detected
independently. Therefore, store the i_version, device number, and inode
number associated with the file metadata inode.
Implement a function to detect changes to the inode and if a change is
detected reset the evm_status. This function will be called by IMA when
IMA detects that the metadata inode is different from the file's inode.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Move all the variables used for file change detection into a structure
that can be used by IMA and EVM. Implement an inline function for storing
the identification of an inode and one for detecting changes to an inode
based on this new structure.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Changes to file attributes (mode bits, uid, gid) on the lower layer are
not taken into account when d_backing_inode() is used when a file is
accessed on the overlay layer and this file has not yet been copied up.
This is because d_backing_inode() does not return the real inode of the
lower layer but instead returns the backing inode which in this case
holds wrong file attributes. Further, when CONFIG_OVERLAY_FS_METACOPY is
enabled and a copy-up is triggered due to file metadata changes, then
the metadata are held by the backing inode while the data are still held
by the real inode. Therefore, use d_inode(d_real(dentry, D_REAL_METADATA))
to get to the file's metadata inode and use it to calculate the metadata
hash with.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
To support "portable and immutable signatures" on otherwise unsupported
filesystems, determine the EVM signature type by the content of a file's
xattr. If the file has the appropriate signature type then allow it to be
copied up. All other signature types are discarded as before.
"Portable and immutable" EVM signatures can be copied up by stacked file-
system since the metadata their signature covers does not include file-
system-specific data such as a file's inode number, generation, and UUID.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Copying up xattrs is solely based on the security xattr name. For finer
granularity add a dentry parameter to the security_inode_copy_up_xattr
hook definition, allowing decisions to be based on the xattr content as
well.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM,SELinux)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Rename the backing_inode variable to real_inode since it gets its value
from real_inode().
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
KVM_HVA_ERR_RO_BAD satisfies kvm_is_error_hva(), so there's no need to
duplicate the "if (writable)" block. Fix this by bringing all
kvm_is_error_hva() cases under one conditional.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-5-amoorthy@google.com
[sean: use ternary operator]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The (gfn, data, offset, len) order of parameters is a little strange
since "offset" applies to "gfn" rather than to "data". Add function
comments to make things perfectly clear.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-3-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The current description can be read as "atomic -> allowed to sleep,"
when in fact the intended statement is "atomic -> NOT allowed to sleep."
Make that clearer in the docstring.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-2-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Xe2_HPM uses the same general feature flags as Xe2_LPM. Xe2_HPM is
identified as version 13.01 in the GMD_ID register.
Bspec: 68090, 67163
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-3-balasubramani.vivekanandan@intel.com
Xe2_HPG uses the same general feature flags as Xe2_LPG. Xe2_HPG is
identified as version 20.01 in the GMD_ID register.
Bspec: 68090
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-2-balasubramani.vivekanandan@intel.com
commit 37b2a6510a48("KVM: use __vcalloc for very large allocations")
replaced kvzalloc()/kvcalloc() with vcalloc(), but didn't replace kvfree()
with vfree().
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20240131012357.53563-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the GuestPhysBits field in CPUID.0x80000008 to communicate the max
mappable GPA to userspace, i.e. the max GPA that is addressable by the
CPU itself. Typically this is identical to the max effective GPA, except
in the case where the CPU supports MAXPHYADDR > 48 but does not support
5-level TDP (the CPU consults bits 51:48 of the GPA only when walking the
fifth level TDP page table entry).
Enumerating the max mappable GPA via CPUID will allow guest firmware to
map resources like PCI bars in the highest possible address space, while
ensuring that the GPA is addressable by the CPU. Without precise
knowledge about the max mappable GPA, the guest must assume that 5-level
paging is unsupported and thus restrict its mappings to the lower 48 bits.
Advertise the max mappable GPA via KVM_GET_SUPPORTED_CPUID as userspace
doesn't have easy access to whether or not 5-level paging is supported,
and to play nice with userspace VMMs that reflect the supported CPUID
directly into the guest.
AMD's APM (3.35) defines GuestPhysBits (EAX[23:16]) as:
Maximum guest physical address size in bits. This number applies
only to guests using nested paging. When this field is zero, refer
to the PhysAddrSize field for the maximum guest physical address size.
Tom Lendacky confirmed that the purpose of GuestPhysBits is software use
and KVM can use it as described above. Real hardware always returns zero.
Leave GuestPhysBits as '0' when TDP is disabled in order to comply with
the APM's statement that GuestPhysBits "applies only to guest using nested
paging". As above, guest firmware will likely create suboptimal mappings,
but that is a very minor issue and not a functional concern.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240313125844.912415-3-kraxel@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop KVM's propagation of GuestPhysBits (CPUID leaf 80000008, EAX[23:16])
to HostPhysBits (same leaf, EAX[7:0]) when advertising the address widths
to userspace via KVM_GET_SUPPORTED_CPUID.
Per AMD, GuestPhysBits is intended for software use, and physical CPUs do
not set that field. I.e. GuestPhysBits will be non-zero if and only if
KVM is running as a nested hypervisor, and in that case, GuestPhysBits is
NOT guaranteed to capture the CPU's effective MAXPHYADDR when running with
TDP enabled.
E.g. KVM will soon use GuestPhysBits to communicate the CPU's maximum
*addressable* guest physical address, which would result in KVM under-
reporting PhysBits when running as an L1 on a CPU with MAXPHYADDR=52,
but without 5-level paging.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240313125844.912415-2-kraxel@redhat.com
[sean: rewrite changelog with --verbose, Cc stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When checking whether the power-down delay should be ignored for a specific
PCM runtime, there's no need to keep going through all DAI link components
after any of them is found to be configured to use the power-down delay.
While there, fix a small typo in one of the comment blocks.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://msgid.link/r/90ae761a5b99640ece48363a7099ac2cf402bd37.1712684592.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
These two patches are fixes that the feature depends on, but they also
fix generic issues. So I'm picking them up for fixes as well as
for-next.
* commit 'aea702dde7':
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Link: https://lore.kernel.org/r/20240227003630.3634533-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For ease of testing, it is convenient to run NOMMU kernels in supervisor
mode. The only required change is to offset the kernel load address,
since the beginning of RAM is usually reserved for M-mode firmware.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Zbb and Zicboz ISA extensions have no dependency on an MMU and are
equally useful on NOMMU kernels.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 3335068f87 ("riscv: Use PUD/P4D/PGD pages for the linear
mapping") added logic to allow using RAM below the kernel load address.
However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the
kernel load address. Since that range of memory corresponds to PFNs
below ARCH_PFN_OFFSET, mm initialization runs off the beginning of
mem_map and corrupts adjacent kernel memory. Fix this by restoring the
previous behavior for NOMMU kernels.
Fixes: 3335068f87 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On NOMMU, userspace memory can come from anywhere in physical RAM. The
current definition of TASK_SIZE is wrong if any RAM exists above 4G,
causing spurious failures in the userspace access routines.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Fixes: c3f896dcf1 ("mm: switch the test_vmalloc module to use __vmalloc_node")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Enable DMA mappings in vmwgfx after TTM has been fixed in commit
3bf3710e37 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
This enables full guest-backed memory support and in particular allows
usage of screen targets as the presentation mechanism.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reported-by: Ye Li <ye.li@broadcom.com>
Tested-by: Ye Li <ye.li@broadcom.com>
Fixes: 3b0d6458c7 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com
Add a WARN_ON_ONCE() sanity check to verify that a nested PML Full VM-Exit
is only synthesized when the original VM-Exit from L2 was an EPT Violation.
While KVM can fallthrough to kvm_mmu_do_page_fault() if an EPT Misconfig
occurs on a stale MMIO SPTE, KVM should not treat the access as a write
(there isn't enough information to know *what* the access was), i.e. KVM
should never try to insert a PML entry in that case.
Link: https://lore.kernel.org/r/20240209221700.393189-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the exit_qualification field that is used to track information about
in-flight nEPT violations from "struct kvm_vcpu_arch" to "x86_exception",
i.e. associate the information with the actual nEPT violation instead of
the vCPU. To handle bits that are pulled from vmcs.EXIT_QUALIFICATION,
i.e. that are propagated from the "original" EPT violation VM-Exit, simply
grab them from the VMCS on-demand when injecting a nEPT Violation or a PML
Full VM-exit.
Aside from being ugly, having an exit_qualification field in kvm_vcpu_arch
is outright dangerous, e.g. see commit d7f0a00e43 ("KVM: VMX: Report
up-to-date exit qualification to userspace").
Opportunstically add a comment to call out that PML Full and EPT Violation
VM-Exits use the same bit to report NMI blocking information.
Link: https://lore.kernel.org/r/20240209221700.393189-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly clear the EXIT_QUALIFCATION field when injecting an EPT
misconfig into L1, as required by the VMX architecture. Per the SDM:
This field is saved for VM exits due to the following causes:
debug exceptions; page-fault exceptions; start-up IPIs (SIPIs);
system-management interrupts (SMIs) that arrive immediately after the
execution of I/O instructions; task switches; INVEPT; INVLPG; INVPCID;
INVVPID; LGDT; LIDT; LLDT; LTR; SGDT; SIDT; SLDT; STR; VMCLEAR; VMPTRLD;
VMPTRST; VMREAD; VMWRITE; VMXON; WBINVD; WBNOINVD; XRSTORS; XSAVES;
control-register accesses; MOV DR; I/O instructions; MWAIT; accesses to
the APIC-access page; EPT violations; EOI virtualization; APIC-write
emulation; page-modification log full; SPP-related events; and
instruction timeout. For all other VM exits, this field is cleared.
Generating EXIT_QUALIFICATION from vcpu->arch.exit_qualification is wrong
for all (two) paths that lead to nested_ept_inject_page_fault(). For EPT
violations (the common case), vcpu->arch.exit_qualification will have been
set by handle_ept_violation() to vmcs02.EXIT_QUALIFICATION, i.e. contains
the information of a EPT violation and thus is likely non-zero.
For an EPT misconfig, which can reach FNAME(walk_addr_generic) and thus
inject a nEPT misconfig if KVM created an MMIO SPTE that became stale,
vcpu->arch.exit_qualification will hold the information from the last EPT
violation VM-Exit, as vcpu->arch.exit_qualification is _only_ written by
handle_ept_violation().
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Link: https://lore.kernel.org/r/20240209221700.393189-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Support atomics in bpf_arena that can be JITed as a single x86 instruction.
Instructions that are JITed as loops are not supported at the moment,
since they require more complex extable and loop logic.
JITs can choose to do smarter things with bpf_jit_supports_insn().
Like arm64 may decide to support all bpf atomics instructions
when emit_lse_atomic is available and none in ll_sc mode.
bpf_jit_supports_percpu_insn(), bpf_jit_supports_ptr_xchg() and
other such callbacks can be replaced with bpf_jit_supports_insn()
in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240405231134.17274-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD to skip objtool's
stack validation now that __svm_vcpu_run() and __svm_sev_es_vcpu_run()
create stack frames (though the former's effectiveness is dubious).
Note, due to a quirk in how OBJECT_FILES_NON_STANDARD was handled by the
build system prior to commit bf48d9b756 ("kbuild: change tool coverage
variables to take the path relative to $(obj)"), vmx/vmenter.S got lumped
in with svm/vmenter.S. __vmx_vcpu_run() already plays nice with frame
pointers, i.e. it was collateral damage when commit 7f4b5cde24 ("kvm:
Disable objtool frame pointer checking for vmenter.S") added the
OBJECT_FILES_NON_STANDARD hack-a-fix.
Link: https://lore.kernel.org/all/20240217055504.2059803-1-masahiroy@kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM uses the host save area to context switch RBP, i.e.
preserves RBP for the entirety of __svm_sev_es_vcpu_run(), create a stack
frame using the standared FRAME_{BEGIN,END} macros.
Note, __svm_sev_es_vcpu_run() is subtly not a leaf function as it can call
into ibpb_feature() via UNTRAIN_RET_VM.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to preserve volatile registers that are used in
__svm_sev_es_vcpu_run() to access function parameters after #VMEXIT.
Like saving/restoring non-volatile registers, there's no reason not to
take advantage of hardware restoring registers on #VMEXIT, as doing so
shaves a few instructions and the save area is going to be accessed no
matter what.
Converting all register save/restore code to use the host save area also
make it easier to follow the SEV-ES VMRUN flow in its entirety, as
opposed to having a mix of stack-based versus host save area save/restore.
Add a parameter to RESTORE_HOST_SPEC_CTRL_BODY so that the SEV-ES path
doesn't need to write @spec_ctrl_intercepted to memory just to play nice
with the common macro.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to save/restore non-volatile (callee-saved)
registers in __svm_sev_es_vcpu_run() to take advantage of hardware loading
all registers from the save area on #VMEXIT. KVM still needs to save the
registers it wants restored, but the loads are handled automatically by
hardware.
Aside from less assembly code, letting hardware do the restoration means
stack frames are preserved for the entirety of __svm_sev_es_vcpu_run().
Opportunistically add a comment to call out why @svm needs to be saved
across VMRUN->#VMEXIT, as it's not easy to decipher that from the macro
hell.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
POP @spec_ctrl_intercepted into RAX instead of RBX when discarding it from
the stack so that __svm_sev_es_vcpu_run() doesn't modify any non-volatile
registers. __svm_sev_es_vcpu_run() doesn't return a value, and RAX is
already are clobbered multiple times in the #VMEXIT path.
This will allowing using the host save area to save/restore non-volatile
registers in __svm_sev_es_vcpu_run().
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop 32-bit "support" from __svm_sev_es_vcpu_run(), as SEV/SEV-ES firmly
64-bit only. The "support" was purely the result of bad copy+paste from
__svm_vcpu_run(), which in turn was slightly less bad copy+paste from
__vmx_vcpu_run().
Opportunistically convert to unadulterated register accesses so that it's
easier (but still not easy) to follow which registers hold what arguments,
and when.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Compile (and link) __svm_sev_es_vcpu_run() if and only if SEV support is
actually enabled. This will allow dropping non-existent 32-bit "support"
from __svm_sev_es_vcpu_run() without causing undue confusion.
Intentionally don't provide a stub (but keep the declaration), as any sane
compiler, even with things like KASAN enabled, should eliminate the call
to __svm_sev_es_vcpu_run() since sev_es_guest() unconditionally returns
"false" if CONFIG_KVM_AMD_SEV=n.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unconditionally create a stack frame in __svm_vcpu_run() to play nice with
unwinding via frame pointers, at least until the point where RBP is loaded
with the guest's value. Don't bother conditioning the code on
CONFIG_FRAME_POINTER=y, as RBP needs to be saved and restored anyways (due
to it being clobbered with the guest's value); omitting the "MOV RSP, RBP"
is not worth the extra #ifdef.
Creating a stack frame will allow removing the OBJECT_FILES_NON_STANDARD
tag from vmenter.S once __svm_sev_es_vcpu_run() is fixed to not stomp all
over RBP for no reason.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's unnecessary zeroing of memory when allocating the pages array
in sev_pin_memory() via __vmalloc(), as the array is only used to hold
kernel pointers. The kmalloc() path for "small" regions doesn't zero the
array, and if KVM leaks state and/or accesses uninitialized data, then the
kernel has bigger problems.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c7619a3d3cbb36463531a7c73ccbde9db587986c.1710004509.git.christophe.jaillet@wanadoo.fr
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The SND_SOC_AMD_SOUNDWIRE Kconfig symbol has build dependency on
SOUNDWIRE_AMD. It gets it wrong for a configuration involving
SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=y,SND_SOC_AMD_PS=y and SOUNDWIRE_AMD=m,
which results in a link failure:
ld: vmlinux.o: in function `amd_sdw_probe':
>> sound/soc/amd/ps/pci-ps.c:271:(.text+0x1d51eff):
undefined reference to `sdw_amd_probe'
ld: vmlinux.o: in function `acp63_sdw_machine_select':
>> sound/soc/amd/ps/pci-ps.c:294:(.text+0x1d525d5):
undefined reference to `sdw_amd_get_slave_info'
ld: vmlinux.o: in function `amd_sdw_exit':
>> sound/soc/amd/ps/pci-ps.c:280:(.text+0x1d538ce):
undefined reference to `sdw_amd_exit'
Add a top level check config that forbids any of the AMD ACP drivers
with version >= 6.3 from being built-in with CONFIG_SOUNDWIRE_AMD=m.
Move SND_AMD_ACP_CONFIG common dependency config to
SND_SOC_AMD_ACP63_TOPLEVEL config.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404061257.khJml82D-lkp@intel.com/
Fixes: a806793f23 ("ASoC: amd: simplify soundwire dependencies for legacy stack")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240408180229.3287220-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return struct xe_reg instead of reg.raw from xe_hwmon_get_reg
to have abstracted usage of struct xe_reg.
v2:
- Use xe_reg_is_valid function instead of XE_REG_IS_VALID macro
as it is removed.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-3-karthik.poosa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>