Commit graph

1,294,908 commits

Author SHA1 Message Date
Bastien Curutchet
eff21f5f8e
ASoC: ti: davinci-i2s: Add handling of BP_FC format
McBSP is able to drive bit clock and consume frame clock but BP_FC
format is not handled by McBSP driver.

Add BP_FC format support.
When BP_FC is selected:
  - CLKX and CLKR are configured as outputs
  - The sample rate generator is configured to be able to provide bit
    clock.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-9-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:39 +01:00
Bastien Curutchet
37e313cda3
ASoC: ti: davinci-i2s: Add TDM support
TDM is not supported by the McBSP driver. The McBSP datasheet does not
name explicitly TDM as a supported format but it is possible to configure
the McBSP to do TDM if all slots are used by McBSP.

Add TDM support. It uses single-phase frame. Slot width is used to
compute the McBSP's word length.

Implement the set_tdm_slot() hook of snd_soc_dai_ops struct. It only
supports TDM if all slots are used by McBSP.

The snd_soc_dai_driver's channels_max is updated from 2 to 128.

This was tested with BP_FC format on a platform designed off of
DAVINCI/OMAP_L138. A check is done in davinci_i2s_set_dai_fmt() to
prevent TDM to be used with BC_FC and BC_FP formats.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-8-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:38 +01:00
Bastien Curutchet
7dd7a6d264
ASoC: ti: davinci-i2s: Delete unnecessary assignment
In davinci_i2s_hw_params(), mcbsp_word_length is set twice to
asp_word_length[fmt].

Remove second unnecessary assignment.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-7-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:37 +01:00
Bastien Curutchet
714ffb8d36
ASoC: ti: davinci-i2s: Use external clock to drive sample rate generator
McBSP's internal sample rate generator can be programed to be driven by
its internal clock or by an external clock source located on CLKS pin.
The external clock source case is not handled by the driver.

Handle an optional clock related to this external clock source. If
present, the driver uses the clock located on CLKS pin as input for the
sample rate generator. Thus, the external clock rate is used to compute
divisors. If this optional clock is not present, the sample rate
generator is driven by the McBSP's functional clock.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-6-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:36 +01:00
Bastien Curutchet
6b1517b30d
ASoC: ti: davinci-i2s: Replace dev_err with dev_err_probe
In probe(), the dev_err() is used for every returned error.

Replace dev_err() with dev_err_probe() where -EPROBE_DEFER can be
returned.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-5-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:35 +01:00
Bastien Curutchet
904fb8f843
ASoC: ti: davinci-i2s: Remove the unused clk_input_pin attribute
The clk_input_pin attribute of davinci_mcbsp_dev struct is not set since
commit 257ade78b6 ("ASoC: davinci-i2s: Convert to use edma-pcm").

Remove the attribute.
Keep the behaviour of the MCBSP_CLKR case as MCBSP_CLKR == 0.
I can't test the BC_FP format so I added back the initial comment that
was removed by commit ec63755337 ("ASoC: DaVinci: Added selection of
clk input pin for McBSP"). This was the last dependency to
linux/platform_data/davinci_asp.h so it is not included anymore.

Remove the enum mcbsp_clk_input_pin from davinci_asp.h as it is not used
anywhere else.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-4-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:34 +01:00
Bastien Curutchet
6a4b6b062a
ASoC: dt-bindings: davinci-mcbsp: Add optional clock
The McBSP uses an internal sample rate generator to provide bit clock
or frame clock. This sample rate generator can be programmed to be
driven by McBSP's internal clock source or by an external clock source
(located on CLKS pin). The external clock source is not described in
the bindings.

Add an optional clock item that allows to select an external clock as
sample rate generator's input.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-3-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:33 +01:00
Bastien Curutchet
22a1dd652d
ASoC: dt-bindings: davinci-mcbsp: convert McBSP bindings to yaml schema
Convert the binding for McBSP controllers for TI SoCs from txt
to YAML schema.

Add properties 'clocks', 'clock-names', 'power-domains' and
'#sound-dai-cells' which were missing from the txt file.
Add '#sound-dai-cells' and 'clocks' in the example which were missing
from the txt file.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-2-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:58:32 +01:00
Arnd Bergmann
18f44de63f staging: greybus: change strncpy() to strscpy_pad()
gcc-10 warns about a strncpy() that does not enforce zero-termination:

In file included from include/linux/string.h:369,
                 from drivers/staging/greybus/fw-management.c:9:
In function 'strncpy',
    inlined from 'fw_mgmt_backend_fw_update_operation' at drivers/staging/greybus/fw-management.c:306:2:
include/linux/fortify-string.h:108:30: error: '__builtin_strncpy' specified bound 10 equals destination size [-Werror=stringop-truncation]
  108 | #define __underlying_strncpy __builtin_strncpy
      |                              ^
include/linux/fortify-string.h:187:9: note: in expansion of macro '__underlying_strncpy'
  187 |  return __underlying_strncpy(p, q, size);
      |         ^~~~~~~~~~~~~~~~~~~~

For some reason, I cannot reproduce this with gcc-9 or gcc-11, and I only
get a warning for one of the four related strncpy()s, so I'm not
sure what's going on.

Change all four to strscpy_pad(), which is the safest replacement here,
as it avoids ending up with uninitialized stack data in the tag name.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://github.com/KSPP/linux/issues/90 [1]
Link: https://lore.kernel.org/r/20240408194821.3183462-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:53:50 +02:00
Arnd Bergmann
c3a8f7dfc7 staging: rtl8723bs: convert strncpy to strscpy
gcc-9 complains about a possibly unterminated string in the strncpy() destination:

In function 'rtw_cfg80211_add_monitor_if',
    inlined from 'cfg80211_rtw_add_virtual_intf' at drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2209:9:
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2146:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
 2146 |  strncpy(mon_ndev->name, name, IFNAMSIZ);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This one is a false-positive because of the explicit termination in the following
line, and recent versions of clang and gcc no longer warn about this.

Interestingly, the other strncpy() in this file is missing a termination but
does not produce a warning, possibly because of the type confusion and the
cast between u8 and char.

Change both strncpy() instances to strscpy(), which avoids the warning as well
as the possibly missing termination. No additional padding is needed here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://github.com/KSPP/linux/issues/90
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240408194821.3183462-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:53:50 +02:00
Arnd Bergmann
1b61680cfe staging: rts5208: replace weird strncpy() with memcpy()
When -Wstringop-truncation is enabled, gcc finds a function that
always does a short copy:

In function 'inquiry',
    inlined from 'rtsx_scsi_handler' at drivers/staging/rts5208/rtsx_scsi.c:3210:12:
drivers/staging/rts5208/rtsx_scsi.c:526:17: error: 'strncpy' output truncated copying between 1 and 28 bytes from a string of length 28 [-Werror=stringop-truncation]
  526 |                 strncpy(buf + 8, inquiry_string, sendbytes - 8);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The code originally had a memcpy() that would overread the source string,
and commit 88a5b39b69 ("staging/rts5208: Fix read overflow in memcpy")
fixed this but introduced the warning about truncation in the process.

As Dan points out, the final space in the inquiry_string always gets
cut off, so remove it here for clarity, leaving exactly the 28 non-NUL
characters that can get copied into the output. In the 'pro_formatter_flag'
this is followed by another 20 bytes from the 'formatter_inquiry_str'
array, but there the output never contains a NUL-termination, and the
length is known, so memcpy() is the more logical choice.

Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/lkml/695be581-548f-4e5e-a211-5f3b95568e77@moroto.mountain/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240408194821.3183462-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:53:50 +02:00
Jackson Chui
bef4c8939d staging: greybus: Replace gcam macros with direct dev log calls
Reported by checkpatch:

CHECK: Macro argument 'gcam' may be better as '(gcam)' to avoid
precedence issues

Inline standard calls to 'dev_*' kernel logging functions, in favor
of 'gcam_*' macros, to clear up gcam-related logging.

Signed-off-by: Jackson Chui <jacksonchui.qwerty@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZhRzWNiak1qOdJLL@jc-ubuntu-dev-korn-1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:32 +02:00
Meir Elisha
e945c43df6 Staging: rtl8723bs: Delete dead code from update_current_network()
Remove dead code from rtw_mlme.c in order to improve code readability.

Signed-off-by: Meir Elisha <meir6264@gmail.com>
Link: https://lore.kernel.org/r/20240407123836.115055-1-meir6264@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:23 +02:00
Shahar Avidar
e68e319fc9 staging: pi433: Reorder pi433_exit cleanup calls.
debugfs_remove was called out of order.
Ensure pi433 init & exit have reverse function calls order.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-8-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:14 +02:00
Shahar Avidar
78d17ecffc staging: pi433: Add debugfs_remove in case of driver register fails.
debugfs resources were never cleaned in case of failure to register driver.

Reported-by Dan Carpenter <dan.carpenter@linaro.org>

Fixes: 4ef027d5a3 ("staging: pi433: add debugfs interface")
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-7-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:14 +02:00
Shahar Avidar
bd9ea55b22 staging: pi433: Remove duplicated code using the "goto" error recovery scheme.
pi433_init had "unregister_chrdev" called twice.
Remove it using goto statements.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-6-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:13 +02:00
Shahar Avidar
494566f7a5 staging: pi433: Rename "pi433_dev" of type "dev_t" to "pi433_devt"
Distinguish struct device type instances from dev_t instances
to enhance readability.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-5-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:13 +02:00
Shahar Avidar
cdcf3051f0 staging: pi433: Replace pi433_receive param void type to struct pi433_device.
pi433_receive is only called once.
It immediately assigns the data param to a struct pi433_device.
Rename param name to pi433.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-4-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:13 +02:00
Shahar Avidar
6f85a70352 staging: pi433: Rename struct pi433_device instances to pi433.
Just as other devices use specific names for instantiation,
struct_pi433 should also have a distinct name.
Moreover, some other structs use the "dev" or "device" in their naming
conventions for members, which can be confusing.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-3-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:13 +02:00
Shahar Avidar
80f91c8237 staging: pi433: Rename struct pi433_device buffer field to tx_buffer.
Driver holds buffers in different structs, as does the HW.
Using explicit names for buffers increases readability.

Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-2-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:13 +02:00
Philipp Hortmann
ed394dbf53 MAINTAINERS: vt665?: Replace Forest with Philipp as maintainer
Remove Forest Bond <forest@alittletooquiet.net> as maintainer as this
email address is not reachable anymore. Add me as I want to take care
of the driver and I do have vt6655 and vt6656 hardware to test.

Link: https://lore.kernel.org/linux-staging/d599cd7b-a5d6-4f2d-8744-10254b75f7e5@moroto.mountain/
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240404202450.GA23408@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:52:07 +02:00
Prasad Pandit
98b6073d7a staging: bcm2835-audio: add terminating new line to Kconfig
Add terminating new line to the Kconfig file. It helps while
displaying file with cat(1) command.

Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240330040411.3273337-1-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:51:53 +02:00
Arnd Bergmann
6a0b8c0da8 greybus: arche-ctrl: move device table to its right location
The arche-ctrl has two platform drivers and three of_device_id tables,
but one table is only used for the the module loader, while the other
two seem to be associated with their drivers.

This leads to a W=1 warning when the driver is built-in:

drivers/staging/greybus/arche-platform.c:623:34: error: 'arche_combined_id' defined but not used [-Werror=unused-const-variable=]
  623 | static const struct of_device_id arche_combined_id[] = {

Drop the extra table and register both tables that are actually
used as the ones for the module loader instead.

Fixes: 7b62b61c75 ("greybus: arche-ctrl: Don't expose driver internals to arche-platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-18-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:51:31 +02:00
Dorine Tipo
33a470713a staging: nvec: Fix documentation typo in nvec.c
This commit corrects the spelling of "initialisation" which was
misspelled as "intialisation" in the irqreturn_t nvec_interrupt()
documentation.
The issue was found using checkpatch.

Signed-off-by: Dorine Tipo <dorine.a.tipo@gmail.com>
Link: https://lore.kernel.org/r/20240331170548.81409-1-dorine.a.tipo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:51:16 +02:00
Colin Ian King
fdb43d131f staging: vt6655: remove redundant assignment to variable byData
Variable byData is being assigned a value that is never read, it is
being re-assigned later on. The assignment is redundant and can be
removed.

Cleans up clang scan build warning:
drivers/staging/vt6655/srom.c:67:2: warning: Value stored to 'byData'
is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240328111557.761380-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:51:06 +02:00
Oleg Nesterov
6d029c25b7 selftests/timers/posix_timers: Reimplement check_timer_distribution()
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.

There is not guarantee that this is true even after commit bcb7ee7902
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.

As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.

The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.

Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.

In older kernels which do not have commit bcb7ee7902 ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.

CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.

So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.

[ tglx: Massaged change log, renamed the version check helper ]

Fixes: e797203fb3 ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
2024-04-09 17:48:19 +02:00
Dawei Li
595275ca49 perf/thunderx2: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-11-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:16 +01:00
Dawei Li
fc85cee970 perf/qcom_l2: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-10-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:16 +01:00
Dawei Li
b78d0fa254 perf/hisi_uncore: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-9-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
d7df79e6af perf/hisi_pcie: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-8-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
cf276ee46b perf/dwc_pcie: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-7-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
bea2a13b20 perf/arm_dsu: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-6-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
b5310fa1fe perf/arm_cspmu: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-5-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
60c73240f3 perf/arm-cmn: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-4-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Dawei Li
2f6589df12 perf/alibaba_uncore_drw: Avoid placing cpumask on the stack
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.

Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-3-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Mark Rutland
897fa2c38c cpumask: add cpumask_any_and_but()
In some cases, it's useful to be able to select a random cpu from the
intersection of two masks, excluding a particular CPU.

For example, in some systems an uncore PMU is shared by a subset of
CPUs, and management of this PMU is assigned to some arbitrary CPU in
this set. Whenever the management CPU is hotplugged out, we wish to
migrate responsibility to another arbitrary CPU which is both in this
set and online.

Today we can use cpumask_any_and() to select an arbitrary CPU in the
intersection of two masks. We can also use cpumask_any_but() to select
any arbitrary cpu in a mask excluding, a particular CPU.

To do both, we either need to use a temporary cpumask, which is
wasteful, or use some lower-level cpumask helpers, which can be unclear.

This patch adds a new cpumask_any_and_but() to cater for these cases.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-2-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:47:15 +01:00
Umang Jain
ebee9ca2f5 Revert "staging: vc04_services: vchiq_core: Stop kthreads on shutdown"
This reverts commit d9c60badcc.

It has been reported that stopping kthreads corrupts the VC04 firmware
and creates issues at boot time [1].

A fix-up version of this patch
bac670144384 ("staging: vc04_services: Stop kthreads on .remove") [2]
was also attempted but it also doesn't properly fix the TODO
(i.e. clean module unload) and similar errors were observed when
stopping these khthreads on RaspberryPi 3.

Hence, revert the entire patch for now since it is not very clear why
stopping the kthreads breaks the firmware.

[1]: https://lore.kernel.org/linux-staging/CAPY8ntBaz_RGr2sboQqbuUv+xZNfRct6-sckDLYPTig_HWyXEw@mail.gmail.com/t/#me90b9a9bc91599f18cd65ceb7eedd40e5fee0cdd

[2]: https://lore.kernel.org/linux-staging/171161507013.3072637.12125782507523919379@ping.linuxembedded.co.uk/T/#m1d3de7d2fa73b2447274858353bbd4a0c3a8ba14

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240403052100.2794-1-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:45:17 +02:00
Krzysztof Kozlowski
883295e948 staging: ks7010: replace open-coded module_sdio_driver()
Use module_sdio_driver() instead of open-coding it.  No functional
difference.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240329171057.63941-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:45:14 +02:00
Michael Straube
30b6e72b15 staging: rtl8192e: remove unnecessary wrapper
_rtl92e_dm_ctrl_initgain_byrssi() is just a wrapper around
_rtl92e_dm_ctrl_initgain_byrssi_driver(). Using a wrapper here adds
no value, remove it. Keep the name _rtl92e_dm_ctrl_initgain_byrssi().

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240329111458.14961-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:45:12 +02:00
Krzysztof Kozlowski
9d343b597f staging: pi433: drop driver owner assignment
Core in spi_register_driver() already sets the .owner, so driver
does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240327174724.519607-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:45:09 +02:00
Uri Arev
9643ce5e28 staging: axis-fifo: Fix indentation
Warning reported by checkpatch.pl script:

CHECK: Alignment should match open parenthesis

Signed-off-by: Uri Arev <me@wantyapps.xyz>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240305211416.755911-1-me@wantyapps.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:44:54 +02:00
Andy Shevchenko
105350fe07 drivers/perf: thunderx2_pmu: Replace open coded acpi_match_acpi_device()
Replace open coded acpi_match_acpi_device() in get_tx2_pmu_type().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404170016.2466898-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-09 16:44:15 +01:00
Derek Fang
306b38e3fa
ASoC: dt-bindings: rt5645: add cbj sleeve gpio property
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:40:49 +01:00
Derek Fang
103abab975
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:40:48 +01:00
end.to.start
4b9a474c7c
ASoC: acp: Support microphone from device Acer 315-24p
This patch adds microphone detection for the Acer 315-24p, after which a microphone appears on the device and starts working

Signed-off-by: end.to.start <end.to.start@mail.ru>
Link: https://msgid.link/r/20240408152454.45532-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:40:47 +01:00
Pawan Gupta
53bc516ade x86/msr: Move ARCH_CAP_XAPIC_DISABLE bit definition to its rightful place
The ARCH_CAP_XAPIC_DISABLE bit of MSR_IA32_ARCH_CAP is not in the
correct sorted order. Move it where it belongs.

No functional change.

  [ bp: Massage commit message. ]

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/243317ff6c8db307b7701a45f71e5c21da80194b.1705632532.git.pawan.kumar.gupta@linux.intel.com
2024-04-09 17:39:54 +02:00
Dmitry Baryshkov
1a395af9d5 usb: typec: ucsi_glink: drop special handling for CCI_BUSY
Newer Qualcomm platforms (sm8450+) successfully handle busy state and
send the Command Completion after sending the Busy state. Older devices
have firmware bug and can not continue after sending the CCI_BUSY state,
but the command that leads to CCI_BUSY is already forbidden by the
NO_PARTNER_PDOS quirk.

Follow other UCSI glue drivers and drop special handling for CCI_BUSY
event. Let the UCSI core properly handle this state.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-3-716c145ca4b1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:38:58 +02:00
Dmitry Baryshkov
c82d6cbb03 usb: typec: ucsi_glink: drop NO_PARTNER_PDOS quirk for sm8550 / sm8650
The Qualcomm SM8550 (and via a fallback compat SM8650) firmware properly
handles the GET_PDOS command, it sends the CCI_BUSY notification,
and then follows with the CCI_COMMAND_COMPLETE event. Stop using the quirk
for those two platforms.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-2-716c145ca4b1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:38:58 +02:00
Dmitry Baryshkov
0c5794f7b0 usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk on qcm6490
Enable the UCSI_DELAY_DEVICE_PDOS quirk on Qualcomm QCM6490. This
platform also doesn't correctly handle reading PD capabilities until PD
partner is connected.

Fixes: 5da727f758 ("usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-1-716c145ca4b1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09 17:38:58 +02:00
Geert Uytterhoeven
9fd60615ad
ASoC: codecs: Rockchip on-SoC codecs should depend on ARCH_ROCKCHIP
The various Rockchip embedded audio codecs are only present on Rockchip
SoCs.  Hence add dependencies on ARCH_ROCKCHIP, to prevent asking the
user about these drivers when configuring a kernel without Rockchip SoC
support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/6cdbaf4afcf4d2059b257f6cb3a8a61bf5e17688.1712676714.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09 16:38:42 +01:00