Avoid refreshing DFS referral with refpath_lock acquired as the I/O
could block for a while due to a potentially disconnected or slow DFS
root server and then making other threads - that use same @server and
don't require a DFS root server - unable to make any progress.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021527.ZlRkIxgv-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Sometimes the readout of /sys/kernel/debug/swiotlb/io_tlb_used and
io_tlb_used_hiwater can be a huge number (e.g. 18446744073709551615),
which is actually a negative number if we use "%ld" to print the number.
When swiotlb_create_default_debugfs() is running from late_initcall,
mem->total_used may already be non-zero, because the storage driver
may have already started to perform I/O operations: if the storage
driver is built-in, its probe() callback is called before late_initcall.
swiotlb_create_debugfs_files() should not blindly set mem->total_used
and mem->used_hiwater to 0; actually it doesn't have to initialize the
fields at all, because the fields, as part of the global struct
io_tlb_default_mem, have been implicitly initialized to zero.
Also don't explicitly set mem->transient_nslabs to 0.
Fixes: 8b0977ecc8 ("swiotlb: track and report io_tlb_used high water marks in debugfs")
Fixes: 02e7656970 ("swiotlb: add debugfs to track swiotlb transient pool usage")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In current code, swiotlb_bounce() may do partial sync's correctly in
some circumstances, but may incorrectly fail in other circumstances.
The failure cases require both of these to be true:
1) swiotlb_align_offset() returns a non-zero "offset" value
2) the tlb_addr of the partial sync area points into the first
"offset" bytes of the _second_ or subsequent swiotlb slot allocated
for the mapping
Code added in commit 868c9ddc18 ("swiotlb: add overflow checks
to swiotlb_bounce") attempts to WARN on the invalid case where
tlb_addr points into the first "offset" bytes of the _first_
allocated slot. But there's no way for swiotlb_bounce() to distinguish
the first slot from the second and subsequent slots, so the WARN
can be triggered incorrectly when #2 above is true.
Related, current code calculates an adjustment to the orig_addr stored
in the swiotlb slot. The adjustment compensates for the difference
in the tlb_addr used for the partial sync vs. the tlb_addr for the full
mapping. The adjustment is stored in the local variable tlb_offset.
But when #1 and #2 above are true, it's valid for this adjustment to
be negative. In such case the arithmetic to adjust orig_addr produces
the wrong result due to tlb_offset being declared as unsigned.
Fix these problems by removing the over-constraining validations added
in 868c9ddc18. Change the declaration of tlb_offset to be signed
instead of unsigned so the adjustment arithmetic works correctly.
Tested with a test-only hack to how swiotlb_tbl_map_single() calls
swiotlb_bounce(). Instead of calling swiotlb_bounce() just once
for the entire mapped area, do a loop with each iteration doing
only a 128 byte partial sync until the entire mapped area is
sync'ed. Then with swiotlb=force on the kernel boot line, run a
variety of raw disk writes followed by read and verification of
all bytes of the written data. The storage device has DMA
min_align_mask set, and the writes are done with a variety of
original buffer memory address alignments and overall buffer
sizes. For many of the combinations, current code triggers the
WARN statements, or the data verification fails. With the fixes,
no WARNs occur and all verifications pass.
Fixes: 5f89468e2f ("swiotlb: manipulate orig_addr when tlb_addr has offset")
Fixes: 868c9ddc18 ("swiotlb: add overflow checks to swiotlb_bounce")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow a buffer pre-padding of up to alloc_align_mask, even if it requires
allocating additional IO TLB slots.
If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask
covers any non-zero bits in the original address between IO_TLB_SIZE and
alloc_align_mask, these bits are not preserved in the swiotlb buffer
address.
To fix this case, increase the allocation size and use a larger offset
within the allocated buffer. As a result, extra padding slots may be
allocated before the mapping start address.
Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR.
These slots do not correspond to any CPU buffer, so attempts to sync the
data should be ignored.
The padding slots should be automatically released when the buffer is
unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the
DMA buffer slot, not the first padding slot. Save the number of padding
slots in struct io_tlb_slot and use it to adjust the slot index in
swiotlb_release_slots(), so all allocated slots are properly freed.
Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present")
Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Linux 6.9 made the nvme multipath nodes not properly pick up changes when
the LBA size goes smaller after an nvme format. This is because we now
try to inherit the queue settings for the multipath node entirely from
the individual paths. That is the right thing to do for I/O size
limitations, which make up most of the queue limits, but it is wrong for
changes to the namespace configuration, where we do want to pick up the
new format, which will eventually show up on all paths once they are
re-queried.
Fix this by not inheriting the block size and related fields and always
for updating them.
Fixes: 8f03cfa117 ("nvme: don't use nvme_update_disk_info for the multipath disk")
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
pxa_ssp_request() implies a reference counting, hence the pxa_ssp_free()
must be called when we are done. Add missed call.
Fixes: bb77c99ee6 ("spi: pxa2xx: Skip SSP initialization if it's done elsewhere")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240402144523.3402063-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is modified nau8325_dac_oversampl_enum enumerated.
Use SOC_VALUE_ENUM instead to hide empty (presumably invalid) options.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240401104753.3432507-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
R-Car Gen1 and Gen4 doesn't have SCU, and current driver checks Gen1
(only) on each devices (A). But these drivers are assuming it might be
not enabled after that (B).
/* This driver doesn't support Gen1 at this point */
(A) if (rsnd_is_gen1(priv))
return 0;
(B) node = rsnd_src_of_node(priv);
if (!node)
return 0; /* not used is not error */
Gen4 DT doesn't have these device settings. (A) check doesn't work for
it, but (B) check handling it.
Gen1 DT doesn't have these device settings either, and (A) is handling
it, but (B) only is very enough. (A) is no longer needed.
This patch removes (A)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v850a4dl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC today.
In general, driver uses flag to handling SoC difference. But in Renesas
Sound case, the differences are very specific, if you try to make it
general, the code will become be very complicated.
Some of them can use flag to handling, but we can find-out all diffence
by using "grep rsnd_is_gen" today. It is not so good, but not so bad so
far. So we will keep current style for a while.
This patch cares Gen1/Gen2 exception by using negative handling to makes no
more update for this part when we support Gen5 or later.
- if (rsnd_is_gen3() || rsnd_is_gen4() || rsnd_is_gen5() || ...)
+ if (!rsnd_is_gen1() && !rsnd_is_gen2())
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmpga4ds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC except rsnd_is_e3(). Let's put same rule for E3 as well.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y19wa4dy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All SoC has reg-name, no need to support getting resource from ID
any more. Remove it. To get physical address for DMA settings,
it still need to know the index, but it is no longer fixed.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfuca4e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
R-Car Sound is using almost same register mapping on each generation,
therefore we can share it. Here indicates some memo/comments.
SSI/SSIU/SCU have multi channels (SSI0 - SSI9 etc), but ADG is single,
so, we don't need to have multi channel settings for it
- rsnd_gen_regmap_init(..., 10, ..ADG, ...);
+ rsnd_gen_regmap_init(..., 1, ..ADG, ...);
Gen4 added new SSI_BUSIF, but it is not used
Gen4 calls rsnd_gen_regmap_init() for SDMC, but the address is calculated
by rsnd_gen4_dma_addr(). It needs physical address, but other info are
not needed. use NULL conf for it.
- rsnd_gen_regmap_init(..., 10, ..SDMC, conf_sdmc);
+ rsnd_gen_regmap_init(..., 1, ..SDMC, conf_null);
Gen4 have only SSI0/SSIU0, we don't need to have multi channel settings.
- rsnd_gen_regmap_init(..., 10, ..SSI, ...);
+ rsnd_gen_regmap_init(..., 1, ..SSI, ...);
SSI_MODE2 address is different between Gen2/3 and Gen4, but it is not
used on Gen4. Thus we can share same regmap table.
Gen2/3 : 0x808
Gen4 : 0xa0c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://msgid.link/r/871q7obiyt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new snd-soc-card KUnit test with a simple test case for
snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the snd_ctl_find_id_mixer[_locked]() wrapper in
snd_soc_card_get_kcontrol[_locked]() instead of open-coding a custom
list walk of the card controls list.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds wrapper function snd_ctl_find_id_mixer_locked(). This is
identical to snd_ctl_find_id_mixer() except that it can be called
from code that is already holding controls_rwsem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We removed the configuration of ES8326_ADC_SCALE
in es8326_jack_detect_handler because user changed
the configuration by snd_controls
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-5-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got a headphone detection issue after suspend and resume.
And we fixed it by modifying the configuration at es8326_suspend
and invoke es8326_irq at es8326_resume.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-4-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got a digital microphone feature issue. And we fixed it by modifying
the clock table. Also, we changed the marco ES8326_CLK_ON declaration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the debounce timer
configuration. And we fixed the button detection error by disabling the
button detection feature when the headphone are unplugged and enabling it
when headphone are plugged in.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch improves the run-time calculation for program stats by
capturing the duration as soon as possible after the program returns.
Previously, the duration included u64_stats_t operations. While the
instrumentation overhead is part of the total time spent when stats are
enabled, distinguishing between the program's native execution time and
the time spent due to instrumentation is crucial for accurate
performance analysis.
By making this change, the patch facilitates more precise optimization
of BPF programs, enabling users to understand their performance in
environments without stats enabled.
I used a virtualized environment to measure the run-time over one minute
for a basic raw_tracepoint/sys_enter program, which just increments a
local counter. Although the virtualization introduced some performance
degradation that could affect the results, I observed approximately a
16% decrease in average run-time reported by stats with this change
(310 -> 260 nsec).
Signed-off-by: Jose Fernandez <josef@netflix.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402034010.25060-1-josef@netflix.com
'no-emmc' is not a valid property.
The original intention was to use the 'no-mmc' property.
Change it accordingly to fix the following dt-schema warning:
imx7s-mba7.dtb: mmc@30b40000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Fixes: d430a7e0e1 ("ARM: dts: imx7-mba7: restrict usdhc interface modes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit adds device tree support for the NXP S32G3-based
S32G-VNP-RDB3 Board [1].
The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
The device tree files are derived from the official NXP downstream
Linux tree [2].
This addition encompasses a limited selection of peripherals that
are upstream-supported. Apart from the ARM System Modules
(GIC, Generic Timer, etc.), the following IPs have been validated:
* UART: fsl-linflexuart
* SDHC: fsl-imx-esdhc
Clock settings for the chip rely on ATF Firmware [3].
Pin control integration into the device tree is pending and currently
relies on Firmware/U-Boot settings [4].
These changes were validated using BSP39 Firmware/U-Boot from NXP [5].
The modifications enable booting the official Ubuntu 22.04 from NXP on
the RDB3 with default settings from the SD card and eMMC.
[1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
[2] https://github.com/nxp-auto-linux/linux
[3] https://github.com/nxp-auto-linux/arm-trusted-firmware
[4] https://github.com/nxp-auto-linux/u-boot
[5] https://github.com/nxp-auto-linux/auto_yocto_bsp
Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Tested-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Reviewed-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
syzkaller started using corpuses where a BPF tracing program deletes
elements from a sockmap/sockhash map. Because BPF tracing programs can be
invoked from any interrupt context, locks taken during a map_delete_elem
operation must be hardirq-safe. Otherwise a deadlock due to lock inversion
is possible, as reported by lockdep:
CPU0 CPU1
---- ----
lock(&htab->buckets[i].lock);
local_irq_disable();
lock(&host->lock);
lock(&htab->buckets[i].lock);
<Interrupt>
lock(&host->lock);
Locks in sockmap are hardirq-unsafe by design. We expects elements to be
deleted from sockmap/sockhash only in task (normal) context with interrupts
enabled, or in softirq context.
Detect when map_delete_elem operation is invoked from a context which is
_not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an
error.
Note that map updates are not affected by this issue. BPF verifier does not
allow updating sockmap/sockhash from a BPF tracing program today.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+bc922f476bd65abbd466@syzkaller.appspotmail.com
Reported-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=d4066896495db380182e
Closes: https://syzkaller.appspot.com/bug?extid=bc922f476bd65abbd466
Link: https://lore.kernel.org/bpf/20240402104621.1050319-1-jakub@cloudflare.com
When we're engaged in local caching of a cifs filesystem, we cannot perform
caching of a partially written cache granule unless we can read the rest of
the granule. This can result in unexpected access errors being reported to
the user.
Fix this by the following: if a file is opened O_WRONLY locally, but the
mount was given the "-o fsc" flag, try first opening the remote file with
GENERIC_READ|GENERIC_WRITE and if that returns -EACCES, try dropping the
GENERIC_READ and doing the open again. If that last succeeds, invalidate
the cache for that file as for O_DIRECT.
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When testing send_signal and stacktrace_build_id_nmi using the riscv sbi
pmu driver without the sscofpmf extension or the riscv legacy pmu driver,
then failures as follows are encountered:
test_send_signal_common:FAIL:perf_event_open unexpected perf_event_open: actual -1 < expected 0
#272/3 send_signal/send_signal_nmi:FAIL
test_stacktrace_build_id_nmi:FAIL:perf_event_open err -1 errno 95
#304 stacktrace_build_id_nmi:FAIL
The reason is that the above pmu driver or hardware does not support
sampling events, that is, PERF_PMU_CAP_NO_INTERRUPT is set to pmu
capabilities, and then perf_event_open returns EOPNOTSUPP. Since
PERF_PMU_CAP_NO_INTERRUPT is not only set in the riscv-related pmu driver,
it is better to skip testing when this capability is set.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402073029.1299085-1-pulehui@huaweicloud.com
UHBR13.5 is not supported in MTL and also the DP2.1 spec says UHBR13.5
is optional. Hence removing UHBR135 from the supported link rates.
v2: Reframed the commit message and added link to the issue.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 62618c7f11 ("drm/i915/mtl: C20 PLL programming")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228144350.3184930-1-arun.r.murthy@intel.com
(cherry picked from commit ddf8a8bbb5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SMB2_GLOBAL_CAP_ENCRYPTION flag should be used only for 3.0 and
3.0.2 dialects. This flags set cause compatibility problems with
other SMB clients.
Reported-by: James Christopher Adduono <jc@adduono.com>
Tested-by: James Christopher Adduono <jc@adduono.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc
response to ksmbd kernel server. ksmbd should validate payload size of
ipc response from ksmbd.mountd to avoid memory overrun or
slab-out-of-bounds. This patch validate 3 ipc response that has payload.
Cc: stable@vger.kernel.org
Reported-by: Chao Ma <machao2019@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When generated BPF skeleton header is included in C++ code base, some
compiler setups will emit warning about using language extensions due to
typeof() usage, resulting in something like:
error: extension used [-Werror,-Wlanguage-extension-token]
obj->struct_ops.empty_tcp_ca = (typeof(obj->struct_ops.empty_tcp_ca))
^
It looks like __typeof__() is a preferred way to do typeof() with better
C++ compatibility behavior, so switch to that. With __typeof__() we get
no such warning.
Fixes: c2a0257c1e ("bpftool: Cast pointers for shadow types explicitly.")
Fixes: 00389c58ff ("bpftool: Add support for subskeletons")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240401170713.2081368-1-andrii@kernel.org
Currently, cond_break macro uses bytes to encode the may_goto insn.
Patch [1] in llvm implemented may_goto insn in BPF backend.
Replace byte-level encoding with llvm inline asm for better usability.
Using llvm may_goto insn is controlled by macro __BPF_FEATURE_MAY_GOTO.
[1] 0e0bfacff7
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240402025446.3215182-1-yonghong.song@linux.dev
When more than 64 maps are used by a program and its subprograms the
verifier returns -E2BIG. Add a verbose message which highlights the
source of the error and also print the actual limit.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240402073347.195920-1-aspsk@isovalent.com
In a few places in the bpf uapi headers, EOPNOTSUPP is missing a "P" in
the doc comments. This adds the missing "P".
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240329152900.398260-2-dlechner@baylibre.com
Improve the formatting of the attach flags for cgroup programs in the
relevant man page, and fix typos ("can be on of", "an userspace inet
socket") when introducing that list. Also fix a couple of other trivial
issues in docs.
[ Quentin: Fixed trival issues in bpftool-gen.rst and bpftool-iter.rst ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-4-qmo@kernel.org
As it turns out, the terms in definition lists in the rST file are
already rendered with bold-ish formatting when generating the man pages;
all double-star sequences we have in the commands for the command
description are unnecessary, and can be removed to make the
documentation easier to read.
The rST files were automatically processed with:
sed -i '/DESCRIPTION/,/OPTIONS/ { /^\*/ s/\*\*//g }' b*.rst
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-3-qmo@kernel.org
The rST manual pages for bpftool would use a mix of tabs and spaces for
indentation. While this is the norm in C code, this is rather unusual
for rST documents, and over time we've seen many contributors use a
wrong level of indentation for documentation update.
Let's fix bpftool's indentation in docs once and for all:
- Let's use spaces, that are more common in rST files.
- Remove one level of indentation for the synopsis, the command
description, and the "see also" section. As a result, all sections
start with the same indentation level in the generated man page.
- Rewrap the paragraphs after the changes.
There is no content change in this patch, only indentation and
rewrapping changes. The wrapping in the generated source files for the
manual pages is changed, but the pages displayed with "man" remain the
same, apart from the adjusted indentation level on relevant sections.
[ Quentin: rebased on bpf-next, removed indent level for command
description and options, updated synopsis, command summary, and "see
also" sections. ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-2-qmo@kernel.org
There is no check for overflow of 'start + len' in blk_ioctl_discard().
Hung task occurs if submit an discard ioctl with the following param:
start = 0x80000000000ff000, len = 0x8000000000fff000;
Add the overflow validation now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240329012319.2034550-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In null_add_dev(), if an error happen after initializing the resources
for a zoned null block device, we must free these resources before
exiting the function. To ensure this, move the out_cleanup_zone label
after out_cleanup_disk as we jump to this latter label if an error
happens after calling null_init_zoned_dev().
Fixes: e440626b1c ("null_blk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240330005300.1503252-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use the system unbound event workqueue, use an io_uring
specific one. This avoids dependencies with the tty, which also uses
the system_unbound_wq, and issues flushes of said workqueue from inside
its poll handling.
Cc: stable@vger.kernel.org
Reported-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Iskren Chernev <me@iskren.info>
Link: https://github.com/axboe/liburing/issues/1113
Signed-off-by: Jens Axboe <axboe@kernel.dk>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces. Also replace an instance of strcpy() which is also
deprecated.
s_volume_ident is a NUL-terminated string which is evident from its
usage in udf_debug:
| udf_debug("volIdent[] = '%s'\n", UDF_SB(sb)->s_volume_ident);
s_volume_ident should also be NUL-padded as it is copied out to
userspace:
| if (copy_to_user((char __user *)arg,
| UDF_SB(inode->i_sb)->s_volume_ident, 32))
| return -EFAULT;
Considering the above, a suitable replacement is `strscpy_pad` [2] due
to the fact that it guarantees both NUL-termination and NUL-padding on
the destination buffer.
To simplify the code, let's use the new 2-argument version of
strscpy_pad() introduced in Commit e6584c3964 ("string: Allow
2-argument strscpy()"). Also zero-allocate @outstr so we can safely use
a non-@ret length argument. This is just in case udf_dstrCS0toChar()
doesn't include the NUL-byte in its return length, we won't truncate
@outstr or write garbage bytes either.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240401-strncpy-fs-udf-super-c-v1-1-80cddab7a281@google.com>
Since
32974ad490 ("[IA64] Remove COMPAT_IA32 support")
IA32_STACK_TOP and ia32_setup_arg_pages() are not used anymore.
And
675a081360 ("x86: unify mmap_{32|64}.c")
left behind ia32_pick_mmap_layout() extern declaration.
Remove them all.
[ bp: Massage commit message. ]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230625125411.25840-1-yuehaibing@huawei.com
Devices are enabled by default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses. Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:
cn9130-crb.dtsi:29.35-37.4: Warning (unit_address_vs_reg): /ap0_mmc_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:39.38-46.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:57.33-65.4: Warning (unit_address_vs_reg): /cp0_sd_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:67.31-75.4: Warning (unit_address_vs_reg): /cp0_sd_vcc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>