Commit graph

1,294,908 commits

Author SHA1 Message Date
Krzysztof Kozlowski
0f78d6da0e arm64: dts: marvell: cn9130-db: drop wrong unit-addresses
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses.  Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:

  cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /ap0_sd_vccq@0)
  cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
  cn9130-db.dtsi:33.33-40.4: Warning (unique_unit_address_if_enabled): /ap0_sd_vccq@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
  cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_phy@0)
  cn9130-db.dtsi:33.33-40.4: Warning (unit_address_vs_reg): /ap0_sd_vccq@0: node has a unit name, but no reg or ranges property
  cn9130-db.dtsi:42.38-49.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@0: node has a unit name, but no reg or ranges property
  cn9130-db.dtsi:51.34-54.4: Warning (unit_address_vs_reg): /cp0_usb3_phy@0: node has a unit name, but no reg or ranges property
  cn9130-db.dtsi:56.38-63.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-04-02 14:40:22 +02:00
Krzysztof Kozlowski
5d83c23bc7 arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:

  cn9131-db.dtsi:140.10-163.4: Warning (avoid_unnecessary_addr_size): /cp1/config-space@f4000000/spi@700680/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-04-02 14:40:22 +02:00
Krzysztof Kozlowski
270bd4c3ce arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:

  cn9130-db.dtsi:313.10-336.4: Warning (avoid_unnecessary_addr_size): /cp0/config-space@f2000000/spi@700680/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-04-02 14:40:22 +02:00
Krzysztof Kozlowski
f86f5471f1 arm64: dts: marvell: ap80x: fix IOMMU unit address
Correct the IOMMU device node unit address to match "reg" and fix dtc
W=1 warnings:

  armada-ap80x.dtsi:64.24-80.6: Warning (simple_bus_reg): /ap807/config-space@f0000000/iommu@5000000: simple-bus unit address format error, expected "100000"

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-04-02 14:40:22 +02:00
Arnd Bergmann
d303735ce5 pinctrl: armada-37xx: remove an unused variable
This variable has never been used and can be removed to avoid a W=1 warning:

drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:837:6: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  837 |         int i = 0;

Fixes: 87466ccd94 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20240322132205.906729-1-arnd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-02 14:27:13 +02:00
Rodrigo Vivi
5add703f6a
Merge drm/drm-next into drm-intel-next
Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-02 08:17:13 -04:00
Rafael J. Wysocki
e8217b4bec cpufreq: intel_pstate: Update the maximum CPU frequency consistently
There are 3 places at which the maximum CPU frequency may change,
store_no_turbo(), intel_pstate_update_limits() (when called by the
cpufreq core) and intel_pstate_notify_work() (when handling a HWP
change notification).  Currently, cpuinfo.max_freq is only updated by
store_no_turbo() and intel_pstate_notify_work(), although it principle
it may be necessary to update it in intel_pstate_update_limits() either.

Make all of them mutually consistent.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:57:22 +02:00
Rafael J. Wysocki
f32587dcbe cpufreq: intel_pstate: Replace three global.turbo_disabled checks
Replace the global.turbo_disabled in __intel_pstate_update_max_freq() with
a global.no_turbo one to make store_no_turbo() actually update the maximum
CPU frequency on the trubo preference changes, which needs to be consistent
with arch_set_max_freq_ratio() called from there.

For more consistency, replace the global.turbo_disabled checks in
__intel_pstate_cpu_init() and intel_cpufreq_adjust_perf() with
global.no_turbo checks either.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:57:17 +02:00
Rafael J. Wysocki
9558fae8ce cpufreq: intel_pstate: Read global.no_turbo under READ_ONCE()
Because global.no_turbo is generally not read under intel_pstate_driver_lock
make store_no_turbo() use WRITE_ONCE() for updating it (this is the only
place at which it is updated except for the initialization) and make the
majority of places reading it use READ_ONCE().

Also remove redundant global.turbo_disabled checks from places that
depend on the 'true' value of global.no_turbo because it can only be
'true' if global.turbo_disabled is also 'true'.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:57:10 +02:00
Rafael J. Wysocki
c626a43845 cpufreq: intel_pstate: Rearrange show_no_turbo() and store_no_turbo()
Now that global.turbo_disabled can only change at the cpufreq driver
registration time, initialize global.no_turbo at that time too so they
are in sync to start with (if the former is set, the latter cannot be
updated later anyway).

That allows show_no_turbo() to be simlified because it does not need
to check global.turbo_disabled and store_no_turbo() can be rearranged
to avoid doing anything if the new value of global.no_turbo is equal
to the current one and only return an error on attempts to clear
global.no_turbo when global.turbo_disabled.

While at it, eliminate the redundant ret variable from store_no_turbo().

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:57:04 +02:00
Rafael J. Wysocki
0940f1a801 cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver.  However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).

For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:56:58 +02:00
Rafael J. Wysocki
032c5565eb cpufreq: intel_pstate: Fold intel_pstate_max_within_limits() into caller
Fold intel_pstate_max_within_limits() into its only caller.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-04-02 12:56:51 +02:00
Rafael J. Wysocki
e97a98238d cpufreq: intel_pstate: Use __ro_after_init for three variables
There are at least 3 variables in intel_pstate that do not get updated
after they have been initialized, so annotate them with __ro_after_init.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-02 12:56:43 +02:00
Rafael J. Wysocki
0f2828e17b cpufreq: intel_pstate: Get rid of unnecessary READ_ONCE() annotations
Drop two redundant checks involving READ_ONCE() from notify_hwp_interrupt()
and make it check hwp_active without READ_ONCE() which is not necessary,
because that variable is only set once during the early initialization of
the driver.

In order to make that clear, annotate hwp_active with __ro_after_init.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-02 12:56:40 +02:00
Rafael J. Wysocki
432acb219a cpufreq: intel_pstate: Wait for canceled delayed work to complete
Make intel_pstate_disable_hwp_interrupt() wait for canceled delayed work
to complete to avoid leftover work items running when it returns which
may be during driver unregistration and may confuse things going forward.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-02 12:56:36 +02:00
Rafael J. Wysocki
12ebba42d2 cpufreq: intel_pstate: Simplify spinlock locking
Because intel_pstate_enable/disable_hwp_interrupt() are only called from
thread context, they need not save the IRQ flags when using a spinlock
as interrupts are guaranteed to be enabled when they run, so make them
use spin_lock/unlock_irq().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-02 12:56:33 +02:00
Rafael J. Wysocki
f186b2dace cpufreq: intel_pstate: Drop redundant locking from intel_pstate_driver_cleanup()
Remove the spinlock locking from intel_pstate_driver_cleanup() as it is
not necessary because no other code accessing all_cpu_data[] can run in
parallel with that function.

Had the locking been necessary, though, it would have been incorrect
because the lock in question is acquired from a hardirq handler and
it cannot be acquired from thread context without disabling interrupts.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-02 12:56:08 +02:00
Frank Li
c6ddd6e7b1 arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
The actual clock show wrong frequency:

   echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
   cat /sys/kernel/debug/mmc0/ios

   clock:          200000000 Hz
   actual clock:   166000000 Hz
                   ^^^^^^^^^
   .....

According to

sdhc0_lpcg: clock-controller@5b200000 {
                compatible = "fsl,imx8qxp-lpcg";
                reg = <0x5b200000 0x10000>;
                #clock-cells = <1>;
                clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
                         <&conn_ipg_clk>, <&conn_axi_clk>;
                clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
                                <IMX_LPCG_CLK_5>;
                clock-output-names = "sdhc0_lpcg_per_clk",
                                     "sdhc0_lpcg_ipg_clk",
                                     "sdhc0_lpcg_ahb_clk";
                power-domains = <&pd IMX_SC_R_SDHC_0>;
        }

"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.

After correct clocks order:

   echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
   cat /sys/kernel/debug/mmc0/ios

   clock:          200000000 Hz
   actual clock:   198000000 Hz
                   ^^^^^^^^
   ...

Fixes: 16c4ea7501 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 18:55:44 +08:00
Ulf Hansson
c522e525eb mmc: Merge branch fixes into next
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:53:44 +02:00
Krzysztof Kozlowski
94cd101100 mmc: sdio: store owner from modules with sdio_register_driver()
Modules registering driver with sdio_register_driver() might
forget to set .owner field.  The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.

Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").

Since many drivers forget to set the .owner, this effectively will fix
them.  Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010,
libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano,
wilc1000, wl1251 and more.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:50:14 +02:00
Bjorn Helgaas
f9b17ffcb5 mmc: sdhci-pci-gli: Use pci_set_power_state(), not direct PMCSR writes
d7133797e9 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
ASPM L1.2") and 36ed2fd32b ("mmc: sdhci-pci-gli: A workaround to allow
GL9755 to enter ASPM L1.2") added writes to the Control register in the
Power Management Capability to put the device in D3hot and back to D0.

Use the pci_set_power_state() interface instead because these are generic
operations that don't need to be driver-specific.  Also, the PCI spec
requires some delays after these power transitions, and
pci_set_power_state() takes care of those, while d7133797e9 and
36ed2fd32b did not.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240327214831.1544595-3-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:34:06 +02:00
Bjorn Helgaas
951b7ccc54 mmc: sdhci-pci-gli: Use PCI AER definitions, not hard-coded values
015c9cbcf0 ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.

Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.

This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:30:31 +02:00
Angelo Dureghello
0eed7b4761 MAINTAINERS: update Angelo Dureghello e-mail address
Update my e-mail address to adureghello@baylibre.com.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://lore.kernel.org/r/20240326164733.15271-1-adureghello@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:27:01 +02:00
Rouven Czerwinski
a18a70389f mmc: debugfs: add card entry for quirks
This is useful to check if a quirk has been applied for the connected
mmc card.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-2-r.czerwinski@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:25:08 +02:00
Rouven Czerwinski
a575e778b3 mmc: debugfs: convert permissions to octal
Convert the existing symbolic permissions to the octal presentation as
this is the preferred representation for debugfs permissions.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-1-r.czerwinski@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:25:08 +02:00
Mantas Pucka
f8def10f73 mmc: sdhci-msm: pervent access to suspended controller
Generic sdhci code registers LED device and uses host->runtime_suspended
flag to protect access to it. The sdhci-msm driver doesn't set this flag,
which causes a crash when LED is accessed while controller is runtime
suspended. Fix this by setting the flag correctly.

Cc: stable@vger.kernel.org
Fixes: 67e6db113c ("mmc: sdhci-msm: Add pm_runtime and system PM support")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240321-sdhci-mmc-suspend-v1-1-fbc555a64400@8devices.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:24:19 +02:00
Wadim Mueller
66486ed8d0 dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support
Add a compatible string for the SDHC binding of NXP S32G3 platforms. Here
we use "nxp,s32g2-usdhc" as fallback since the s32g2-usdhc
driver works also on S32G3 platforms.

Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240324214329.29988-4-wafgo01@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Uwe Kleine-König
55c421b364 mmc: davinci: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.

This also fixes a W=1 modpost warning:

WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)

Fixes: b4cff4549b ("DaVinci: MMC: MMC/SD controller driver for DaVinci family")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Sergey Khimich
53ab7f7fe4 mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.

Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-3-serghox@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Sergey Khimich
52bf134fca mmc: cqhci: Add cqhci set_tran_desc() callback
There are could be specific limitations for some mmc
controllers for setting cqhci transfer descriptors.
So add callback to allow implement driver specific function.

Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-2-serghox@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
f4a5ddddb1 mmc: sdhci_am654: Update comments in sdhci_am654_set_clock
The sdhci_am654_set_clock function is also used to enable
delay chain, therefore fix comments to be more generic in
case we are not enabling DLL.

Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-6-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
a66db8167a mmc: sdhci_am654: Fix itapdly/otapdly array type
While integer type works, the otap_del_sel and itap_del_sel
arrays are manipulated as u32, so change array types to u32.

Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-5-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
d3182932bb mmc: sdhci_am654: Fix ITAPDLY for HS400 timing
While STRB is currently used for DATA and CRC responses, the CMD
responses from the device to the host still require ITAPDLY for
HS400 timing.

Currently what is stored for HS400 is the ITAPDLY from High Speed
mode which is incorrect. The ITAPDLY for HS400 speed mode should
be the same as ITAPDLY as HS200 timing after tuning is executed.
Add the functionality to save ITAPDLY from HS200 tuning and save
as HS400 ITAPDLY.

Fixes: a161c45f29 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-8-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
9dff65bb5e mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock
Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
This allows to set the correct ITAPDLY for timings that
do not carry out tuning.

Fixes: 1accbced1c ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-7-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
387c1bf7dc mmc: sdhci_am654: Add OTAP/ITAP delay enable
Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.

Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.

[1] https://www.ti.com/lit/ds/symlink/am62p.pdf

Fixes: 8ee5fc0e0b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-4-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
d465234493 mmc: sdhci_am654: Write ITAPDLY for DDR52 timing
For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.

Fixes: a161c45f29 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-3-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Judith Mendez
6231d99dd4 mmc: sdhci_am654: Add tuning algorithm for delay chain
Currently the sdhci_am654 driver only supports one tuning
algorithm which should be used only when DLL is enabled. The
ITAPDLY is selected from the largest passing window and the
buffer is viewed as a circular buffer.

The new algorithm should be used when the delay chain
is enabled. The ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.

This implementation is based off of the following paper: [1].

Also add support for multiple failing windows.

[1] https://www.ti.com/lit/an/spract9/spract9.pdf

Fixes: 13ebeae68a ("mmc: sdhci_am654: Add support for software tuning")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-2-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Li Zhijian
4c7a022ca4 mmc: core: Convert sprintf/snprintf to sysfs_emit
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.

coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().

sprintf() will be converted as weel if they have.

Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci

No functional change intended

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240314091512.1323650-1-lizhijian@fujitsu.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Muhammad Usama Anjum
0cbff48946 mmc: dw_mmc-hi3798cv200: Remove unneeded assignment
The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.

Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240307145013.2721326-1-usama.anjum@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Muhammad Usama Anjum
be44c37238 mmc: dw_mmc-hi3798mv200: Remove unneeded assignment
The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.

Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307122129.2359553-1-usama.anjum@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Andy Shevchenko
0de0d790e5 mmc: sdhci-sprd: Remove unused of_gpio.h
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307114500.3643489-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:39 +02:00
Andy Shevchenko
0c997105ae mmc: sdhci-s3c: Replace deprecated of_get_named_gpio()
It seems the of_get_named_gpio() is solely used to check
if the GPIO is present in DT as the function can return 0
if and only if it's present and it becomes in the global
number space 0. But this quite likely shows that the code
wasn't ever been tested on the systems when no GPIO is provided.
In any case, the proper test is just to call of_property_present()
without any attempts in requesting GPIO (as we haven't saved the
number or descriptor anywhere in the code).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307121912.3676850-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:38 +02:00
Andy Shevchenko
de11e193ae mmc: mtk-sd: Remove unused of_gpio.h
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307114348.3643034-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:38 +02:00
Andy Shevchenko
359faf0243 mmc: core: Remove unused of_gpio.h
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307114600.3643948-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02 12:21:38 +02:00
Vitor Soares
b98807c7be arm64: dts: freescale: verdin-imx8mp: enable Verdin I2C_3_HDMI interface
Enable Verdin I2C_3_HDMI interface on iMX8MP Toradex Verdin boards.

Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 18:17:29 +08:00
Jouni Högander
71cdfa8cad drm/i915/psr: Do not write ALPM configuration for PSR1 or DP2.0 Panel Replay
No need to write ALPM configuration for DP2.0 Panel Replay or PSR1.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-6-jouni.hogander@intel.com
2024-04-02 12:15:43 +03:00
Jouni Högander
1ccbf13586 drm/i915/psr: Enable ALPM on source side for eDP Panel replay
Enable ALPM AUX-Less on source side for Panel Replay eDP. Also write all
calculated AUX-Less configuration values accordingly. Enabling it on sink
side is in upcoming patch.

Bspec: 71477

v5:
  - mention enable is only on source side in commit message
v4:
  - add comment explaining why AUX less is enabled on eDP panel replay
    without any extra checks
v3:
  - do not use alpm_ctl as uninitialized variable
v2:
  - do not set AUX-Wake related bits for AUX-Less case
  - drop switch to active latency
  - add SLEEP_HOLD_TIME_50_SYMBOLS
  - add PORT_ALPM_CTL_MAX_PHY_SWING_HOLD

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-5-jouni.hogander@intel.com
2024-04-02 12:15:43 +03:00
Jouni Högander
0dd21f8369 drm/i915/psr: Silence period and lfps half cycle
Add get function for silence period and lfps half cycle. Values are taken
from the tables in bspec.

Bspec: 71632

v3:
  - use PORT_ALPM_CTL_SILENCE_PERIOD_MASK instead of value 255
  - use PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION_MASK instead of
    value 31
v2:
  - fix some checks
  - add some more comments

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-4-jouni.hogander@intel.com
2024-04-02 12:15:43 +03:00
Jouni Högander
da6a9836ac drm/i915/psr: Calculate aux less wake time
Calculate aux less wake time and store it into alpm_params struct

Bspec: 71477

v4:
  - re-use fast_wake_lines to store aux_less_wake_lines
v3:
  - use ALPM_CTL_AUX_LESS_WAKE_TIME_MASK instead of value 63
v2:
  - use variables instead of values directly
  - fix max value
  - move converting port clock to Mhz into _lnl_compute_aux_less_wake_time

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-3-jouni.hogander@intel.com
2024-04-02 12:15:43 +03:00
Jouni Högander
295099580f drm/i915/psr: Add missing ALPM AUX-Less register definitions
Couple of ALPM AUX-Less related fields are missing from ALPM register
definitions. Add these and remove some duplicate definitions.

Bspec: 70294

V2: add Bspec reference

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-2-jouni.hogander@intel.com
2024-04-02 12:15:42 +03:00