Commit graph

740,858 commits

Author SHA1 Message Date
Arnd Bergmann
ebfc15019c x86/dumpstack: Avoid uninitlized variable
In some configurations, 'partial' does not get initialized, as shown by
this gcc-8 warning:

arch/x86/kernel/dumpstack.c: In function 'show_trace_log_lvl':
arch/x86/kernel/dumpstack.c:156:4: error: 'partial' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    show_regs_if_on_stack(&stack_info, regs, partial);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This initializes it to false, to get the previous behavior in this case.

Fixes: a9cdbe72c4 ("x86/dumpstack: Fix partial register dumps")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20180202145634.200291-1-arnd@arndb.de
2018-02-02 23:33:50 +01:00
Linus Torvalds
ef991796be This is the bulk of pin control changes for the v4.16 kernel cycle:
Core changes:
 
 - After lengthy discussions and partly due to my ignorance, we have
   merged a patch making pinctrl_force_default() and pinctrl_force_sleep()
   reprogram the states into the hardware of any hogged pins, even
   if they are already in the desired state. This only apply to hogged
   pins since groups of pins owned by drivers need to be managed by
   each driver, lest they could not do things like runtime PM and
   put pins to sleeping state even if the system as a whole is not
   in sleep.
 
 New drivers:
 
 - New driver for the Microsemi Ocelot SoC. This is used in ethernet
   switches.
 
 - The X-Powers AXP209 GPIO driver was extended to also deal with pin
   control and moved over from the GPIO subsystem. This circuit is
   a mixed-mode integrated circuit which is part of AllWinner designs.
 
 - New subdriver for the Qualcomm MSM8998 SoC, core of a high end
   mobile devices (phones) chipset.
 
 - New subdriver for the ST Microelectronics STM32MP157 MPU and
   STM32F769 MCU from the STM32 family.
 
 - New subdriver for the MediaTek MT7622 SoC. This is used for routers,
   repeater, gateways and such network infrastructure.
 
 - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has
   multimedia features and target "smart devices", I guess in-car
   entertainment, in-flight entertainment, industrial control panels etc.
 
 General improvements:
 
 - Incremental improvements on the SH-PFC subdrivers for things like
   the CAN bus.
 
 - Enable the glitch filter on Baytrail GPIOs used for interrupts.
 
 - Proper handling of pins to GPIO ranges on the Semtec SX150X
 
 - An IRQ setup ordering fix on MCP23S08.
 
 - A good set of janitorial coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJadGEKAAoJEEEQszewGV1zA4QQALs8edxhv4qV5vm50mTdrO3n
 QtRhJNb53j6MIKtjFnazMvh6MXRIP+08SyX9sDLi5AxINIVuyQh3mrcB6Zc9zN58
 +6jFFOIbfm5E8by4n3wnKm3F/WAbNBZph9eT2Rn3cDv9o9hQbyNJ50sQkQMCjd9X
 WGR353c3OL4zb3vU8t72G/RPYUY1w1SkG9bGzRuSif8LawDcN6v6MMo2XhZA6RqM
 3qYIG29vJ1n0weggUIBeSAJIzk4eMwcoWCbVWxhns5JGxw5VPES1zbSp1D+mbzRC
 01i5Pt/gD+cWN/Kk/zKIMo1OqLAl+uLr6hzepj6W+5wu9CcQz/BgvRx7HUqnqgyh
 S8cN4AOgWmW+T75pHypd1WVic3q0RCXkFY8jjHpCATDY+Z+js0lZRs3y4DBiJ2ys
 DMVBeumDINKqaZ6aLH6lVkm+SxXOUy143arQQIzi0/F7fAp68i+9ofIO8B5smEmd
 0S+3sT0sO5QXVgZJ0t0iGUUG5irXi8XtF5qvRmuFZUe0OLGgKX20oCdC0pH0WU4M
 OZO1Bvb8vmn1tddogO2WlHeg6amWdwxtDuBsLRO3YILLu3jwPjhNqNmErXzXEmWt
 TY9l2M1uQmoJibNpmTjOzSfj4OtUHMwkDrFRJHAcUPcKwdEy4MyzFL16ATnIwgY9
 AmyMLNWJd8Wazgc6BK6w
 =gLY/
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.16 kernel cycle.
  Like with GPIO it is actually a bit calm this time.

  Core changes:

   - After lengthy discussions and partly due to my ignorance, we have
     merged a patch making pinctrl_force_default() and
     pinctrl_force_sleep() reprogram the states into the hardware of any
     hogged pins, even if they are already in the desired state.

     This only apply to hogged pins since groups of pins owned by
     drivers need to be managed by each driver, lest they could not do
     things like runtime PM and put pins to sleeping state even if the
     system as a whole is not in sleep.

  New drivers:

   - New driver for the Microsemi Ocelot SoC. This is used in ethernet
     switches.

   - The X-Powers AXP209 GPIO driver was extended to also deal with pin
     control and moved over from the GPIO subsystem. This circuit is a
     mixed-mode integrated circuit which is part of AllWinner designs.

   - New subdriver for the Qualcomm MSM8998 SoC, core of a high end
     mobile devices (phones) chipset.

   - New subdriver for the ST Microelectronics STM32MP157 MPU and
     STM32F769 MCU from the STM32 family.

   - New subdriver for the MediaTek MT7622 SoC. This is used for
     routers, repeater, gateways and such network infrastructure.

   - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC
     has multimedia features and target "smart devices", I guess in-car
     entertainment, in-flight entertainment, industrial control panels
     etc.

  General improvements:

   - Incremental improvements on the SH-PFC subdrivers for things like
     the CAN bus.

   - Enable the glitch filter on Baytrail GPIOs used for interrupts.

   - Proper handling of pins to GPIO ranges on the Semtec SX150X

   - An IRQ setup ordering fix on MCP23S08.

   - A good set of janitorial coding style fixes"

* tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits)
  pinctrl: mcp23s08: fix irq setup order
  pinctrl: Forward declare struct device
  pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding
  pinctrl: stm32: add STM32F769 MCU support
  pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping
  pinctrl: sx150x: Register pinctrl before adding the gpiochip
  pinctrl: sx150x: Unregister the pinctrl on release
  pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe()
  pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show()
  pinctrl: pinmux: Use seq_putc() in pinmux_pins_show()
  pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show()
  pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call
  pinctrl: mediatek: mt7622: fix potential uninitialized value being returned
  pinctrl: uniphier: refactor drive strength get/set functions
  pinctrl: imx7ulp: constify struct imx_cfg_params_decode
  pinctrl: imx: constify struct imx_pinctrl_soc_info
  pinctrl: imx7d: simplify imx7d_pinctrl_probe
  pinctrl: imx: use struct imx_pinctrl_soc_info as a const
  pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly.
  pinctrl: qcom: Add msm8998 pinctrl driver
  ...
2018-02-02 14:22:53 -08:00
Linus Torvalds
bf644990a7 RTC for 4.16
Subsystem:
  - Move ABI documentation to Documentation/ABI
 
 New driver:
  - NXP i.MX53 SRTC
  - Chrome OS EC RTC
 
 Drivers:
  - Remove at32ap700x
  - Many fixes in various error paths
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlp0P/wACgkQAyWl4gNJ
 NJLKnQ/+N2b1O5urndPRbxxFOYixNtsNUav7nqslsewWtKJ0q+vSlzkiFXPWIIqm
 7KFoMtp3ZnV30t4QkB3A2SHjIJxo2vSwSkEld6ZpMMaMA2ZRo710eNg7oJanwArG
 3aE6aNY24X/8/fc4zBeNxdeE8wWHYZU40tdkoHctUQSfyb2K2gGQD+/mjJV11Q/s
 +ULx3bqcjnfMWDn5MKMyoxIZiAKwrljtc9dhdK03aVvgCic7cApPHV4W4ksFPGJR
 GuTo/TrKUELi2GxZpbLtoX03K7+NM5nlLeCIBmPKmmCvO60Ie1hGIoaOn5F3jkSR
 8/1OlkUuN3HCn0L67jKH9ujt+NvZnUzl1AEtzN5nx435Ikt7GJGqJyHbljmoNfnw
 LhfZVYhD1y5v0SsJ4lG0KYVL57elTCLQqqnqiLSGBjNsYOOceM7iwwxrMCIMvnHA
 NWSqDMWmJvEl4jRK1Rm0z867JYUW4EN+43YnkMZt8D61LQrYRa5A9s0FRqzfrHjz
 bQgR2KcYPGiHvAJ/D97BUpKbEk4bwrU+Y6gaHyWl1v1uGysP9nA7fCpMbkSov2GA
 04od8FIyiDhpKEmZQapfXLqokgiuDN9Wt5IczVQ3ZgOAZCvneFAojxLwyLqJ0+3D
 xu1wOVrQx3UilA59QqWCC2EiyVWDLEtrnSXjYJCPy/QSfaH7uOI=
 =TjE4
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle. I've pushed the at32ap700x removal late but it is
  unlikely to cause any issues.

  Summary:

  Subsystem:
   - Move ABI documentation to Documentation/ABI

  New driver:
   - NXP i.MX53 SRTC
   - Chrome OS EC RTC

  Drivers:
   - Remove at32ap700x
   - Many fixes in various error paths"

* tag 'rtc-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: remove rtc-at32ap700x
  Documentation: rtc: move iotcl interface documentation to ABI
  Documentation: rtc: add sysfs file permissions
  Documentation: rtc: move sysfs documentation to ABI
  rtc: mxc_v2: remove __exit annotation
  rtc: mxc_v2: Remove unnecessary platform_get_resource() error check
  rtc: add mxc driver for i.MX53 SRTC
  dt-bindings: rtc: add bindings for i.MX53 SRTC
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_set_time
  rtc: r7301: Fix a possible sleep-in-atomic bug in rtc7301_read_time
  rtc: omap: fix unbalanced clk_prepare_enable/clk_disable_unprepare
  rtc: ac100: Fix multiple race conditions
  rtc: sun6i: ensure rtc is kfree'd on error
  rtc: cros-ec: add cros-ec-rtc driver.
  mfd: cros_ec: Introduce RTC commands and events definitions.
  rtc: stm32: Fix copyright
  rtc: Remove unused RTC_DEVICE_NAME_SIZE
  rtc: r9701: Remove r9701_remove function
  rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()
2018-02-02 14:19:19 -08:00
Darren Kenny
af189c95a3 x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
Fixes: 117cc7a908 ("x86/retpoline: Fill return stack buffer on vmexit")
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180202191220.blvgkgutojecxr3b@starbug-vm.ie.oracle.com
2018-02-02 23:13:57 +01:00
Arnd Bergmann
4bf5d56d42 x86/pti: Mark constant arrays as __initconst
I'm seeing build failures from the two newly introduced arrays that
are marked 'const' and '__initdata', which are mutually exclusive:

arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init'
arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init'

The correct annotation is __initconst.

Fixes: fec9434a12 ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180202213959.611210-1-arnd@arndb.de
2018-02-02 23:13:56 +01:00
Toshi Kani
23fbd7c70a acpi, nfit: fix register dimm error handling
A NULL pointer reference kernel bug was observed when
acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This
error path does not set nfit_mem->nvdimm, but the 2nd
list_for_each_entry() loop in the function assumes it's always set. Add
a check to nfit_mem->nvdimm.

Cc: <stable@vger.kernel.org>
Fixes: ba9c8dd3c2 ("acpi, nfit: add dimm device notification support")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-02 13:49:29 -08:00
Linus Torvalds
b89e32ccd1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha updates from Matt Turner:
 "A few small fixes and clean ups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: fix crash if pthread_create races with signal delivery
  alpha: fix formating of stack content
  alpha: fix reboot on Avanti platform
  alpha: deprecate pci_get_bus_and_slot()
  alpha: Fix mixed up args in EXC macro in futex operations
  alpha: osf_sys.c: use timespec64 where appropriate
  alpha: osf_sys.c: fix put_tv32 regression
  alpha: make thread_saved_pc static
  alpha: make XTABS equivalent to TAB3
2018-02-02 13:46:21 -08:00
Chris Wilson
55ef72f24f drm/i915: Remove spurious DRM_ERROR for cancelled interrupts
As we ourselves cancel interrupts during reset by clearing the GTIIR, it
is possible for the master IIR to indicate a pending IRQ for which we
have already cleared from the GTIIR. In this case, the DRM_ERROR are
intended and should not be flagged as an error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202153448.23908-1-chris@chris-wilson.co.uk
2018-02-02 20:31:52 +00:00
Chris Wilson
274de87606 drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset
Be paranoid and flush the GTIIR after clearing the CS interrupt to be
sure it has taken before we re-enable the interrupt handler. We still
see early interrupts following reset, the tasklet handling the mmio read
before it has been written by the CS. This hopefully reduces the
frequency to 0...

References: https://bugs.freedesktop.org/show_bug.cgi?id=104262
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202145455.29876-1-chris@chris-wilson.co.uk
2018-02-02 20:31:52 +00:00
Arnaldo Carvalho de Melo
4053717aa5 tools headers: Synchoronize x86 features UAPI headers
Sync tools/arch/x86/include/asm/{cpu,disabled-,required-}features.h with
the changes in:

  2961298efe ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
  20ffa1caec ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support")
  5d10cbc91d ("x86/cpufeatures: Add AMD feature bits for Speculation Control")
  fc67dd70ad ("x86/cpufeatures: Add Intel feature bits for Speculation Control")
  95ca0ee863 ("x86/cpufeatures: Add CPUID_7_EDX CPUID leaf")
  a511e79353 ("x86/intel_rdt: Enumerate L2 Code and Data Prioritization (CDP) feature")
  4fdec2034b ("x86/cpufeature: Move processor tracing out of scattered features")
  c995efd5a7 ("x86/retpoline: Fill RSB on context switch for affected CPUs")
  76b043848f ("x86/retpoline: Add initial retpoline support")
  99c6fa2511 ("x86/cpufeatures: Add X86_BUG_SPECTRE_V[12]")
  de791821c2 ("x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN")
  6cff64b86a ("x86/mm: Use INVPCID for __native_flush_tlb_single()")

None will entail changes in the tools/perf/, synchronizing to elliminate
these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-dbdjack1k92xar5ccuq4el1h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-02 17:22:12 -03:00
Arnaldo Carvalho de Melo
7a16c7e15f tools headers: Synchronize uapi/linux/sched.h
To get the tools copy updated with the changes in 34be39305a
("sched/deadline: Implement "runtime overrun signal" support"), that
cause no effect on the tools, will be used when we start copying the
sched_attr struct argument to the sched_get/setattr syscalls.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8rododhs87x8hv9k83qcdtne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-02 17:17:13 -03:00
Arnaldo Carvalho de Melo
1b8f516094 tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h
The changes in the 3214d01f13 ("KVM: PPC: Book3S: Provide information
about hardware/firmware CVE workarounds") commit right now will not
produce any change in the tools, but that is because we still need to
improve tools/perf/trace/beauty/kvm_ioctl.sh to build per arch string
tables, so that we avoid assigning multiple times to the same command
string entry, i.e. multiple defines, for different arches, have the same
value, causing this:

  In file included from trace/beauty/ioctl.c:82:0:
  /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c: In function ‘ioctl__scnprintf_kvm_cmd’:
  /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:76:11: error: initialized field overwritten [-Werror=override-init]
  /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:88:11: note: (near initialization for ‘kvm_ioctl_cmds[165]’)
  /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:90:11: error: initialized field overwritten [-Werror=override-init]
    [0xa6] = "PPC_GET_SMMU_INFO",
             ^~~~~~~~~~~~~~~~~~~

So the onlye effect of updating the tools/ copy of ppc's kvm.h header
is to silence these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'

At some point we should do what we did for the errno tables and create
per-arch string translation tables for the KVM ioctl commands for the
architectures supporting KVM, such as s/390, PowerPC, x86_64 and ARM.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jmcf78tqiudgn46zqfw2tgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-02 17:04:53 -03:00
Arnaldo Carvalho de Melo
9a3853587c tooling headers: Synchronize updated s390 kvm UAPI headers
The 35b3fde620 ("KVM: s390: wire up bpb feature") was noticed by the
perf build process:

  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'

The changes in this cset don't cause or require changes in tools/perf/,
so just update the copy to silence the build warning.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kif2fdkcaewj8iqw6lwyil8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-02 16:43:45 -03:00
Arnaldo Carvalho de Melo
6bc7626c04 tools headers: Synchronize sound/asound.h
To pick up the changes from this cset:

  823dbb6eb0 ("ALSA: pcm: add SNDRV_PCM_FORMAT_{S,U}20")

It doesn't affect how the tools are built, this os done just to silence
this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'

Right now tools/perf uses this header to generate string tables to
translate ioctl commands in 'perf trace', see
tools/perf/trace/beauty/sndrv_pcm_ioctl.sh, here is an example
of a strace like system wide session, for one second:

  # perf trace -a -e ioctl sleep 1
     0.000 ( 0.019 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
     0.081 ( 0.006 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
     0.092 ( 0.006 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7f6745ec4ae0) = 0
    10.178 ( 0.013 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    10.229 ( 0.005 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    10.238 ( 0.013 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7f6745ec4ae0) = 0
    10.368 ( 0.009 ms): threaded-ml/26440 ioctl(fd: 141<socket:[111353]>, cmd: TIOCLINUX, arg: 0x7f8f70d2e1a4) = 0
    10.495 ( 0.018 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    10.526 ( 0.005 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    19.695 ( 0.018 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    19.757 ( 0.006 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x107b) = 0
    19.767 ( 0.005 ms): alsa-sink-HDMI/4219 ioctl(fd: 47</dev/snd/pcmC0D8p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7f6745ec4ae0) = 0
<BIG SNIP>
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-sfpeesn8w0pyn3fe7vf2xmfl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-02 16:41:49 -03:00
Chuck Lever
e89e8d8fcd xprtrdma: Fix BUG after a device removal
Michal Kalderon reports a BUG that occurs just after device removal:

[  169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[  169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[  169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]

The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.

If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.

rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.

Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-02-02 13:31:04 -05:00
Chuck Lever
1179e2c27e xprtrdma: Fix calculation of ri_max_send_sges
Commit 16f906d66c ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).

At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:

  ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;

Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.

More recently, commit ae72950abf ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.

This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.

So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.

Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: 16f906d66c ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-02-02 13:29:57 -05:00
Linus Torvalds
03f51d4efa powerpc updates for 4.16
Highlights:
 
  - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when
    using the hash table MMU.
 
  - Extend our interrupt soft masking to support masking PMU interrupts as well
    as "normal" interrupts, and then use that to implement local_t for a ~4x
    speedup vs the current atomics-based implementation.
 
  - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface
    (OpenCAPI)" devices.
 
  - Support for new device tree properties on PowerVM to describe hotpluggable
    memory and devices.
 
  - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO.
 
  - Freescale updates from Scott:
      "Contains fixes for CPM GPIO and an FSL PCI erratum workaround, plus a
       minor cleanup patch."
 
 As well as quite a lot of other changes all over the place, and small fixes and
 cleanups as always.
 
 Thanks to:
   Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas
   Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman
   Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin
   Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater,
   Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes
   do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G.
   Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim
   Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright,
   Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre,
   Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
   Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai,
   Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart
   Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl
   Gomonovych.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJadF6wExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYA2
 nBAAnguCEyAIYpc+ffE3WU9xJEWxa6bKuVufHcUFVntGiGD+igmMS+SHp4ay3Aos
 HcA4WFrpzNb2KZ++kmFWtAKWnMfCiW9xuYJNicjr7X5ZiVBEhLWN/mQCwBKs3p6L
 5+HhvytcdkKVbEcyVjEGvRL40AyxXNOI02o6Co9X8vanHsmWB4q0eWe4PHstZqlg
 6K6kazMp+NTvEFYwKNXDOvuHouKSL57l14SLROH7CpJkNTOQ9s+W59/LmnuCjRlu
 o70b7iWOAEbF9tvMma1ksDZVNj7mSyaymLYCyOXu4CkuuleJacZYJ9oQGNddoIbC
 wk7l93vPT/yze7DYg8x3uXpKcaDEvEepPuQ/ubz+UXFQWuJtl5ej6Cv+0eOmyZIs
 +bjWhGHKdNttnsiPlTRCX/gWD13RE1dB6xXJlfOJ7Oz9OnXXK8ZKc1NTREbQXRWM
 8tClAwf9upWpm86GHPVnyrgYbgZo5b1os4SoS8e3kESzakrQVQP7J376u2DtccRq
 2AGqjJ+tl5tYPnhm8zG1cNrpqHHpgkNGqLS7DvWRg3EPmEKVQcltN1b/0aKaAjHA
 aTRofjrVo+jJ4MX1uyEo59yNCEQPfjkmHRQdLwm+xjWTzEPfIMzpWyXm14tawDQf
 OjcAe90W/qQ18brw4z+2BI14J76XziOSX/QcunOn1u/sqaM=
 =3rYn
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:

   - Enable support for memory protection keys aka "pkeys" on Power7/8/9
     when using the hash table MMU.

   - Extend our interrupt soft masking to support masking PMU interrupts
     as well as "normal" interrupts, and then use that to implement
     local_t for a ~4x speedup vs the current atomics-based
     implementation.

   - A new driver "ocxl" for "Open Coherent Accelerator Processor
     Interface (OpenCAPI)" devices.

   - Support for new device tree properties on PowerVM to describe
     hotpluggable memory and devices.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit
     VDSO.

   - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI
     erratum workaround, plus a minor cleanup patch.

  As well as quite a lot of other changes all over the place, and small
  fixes and cleanups as always.

  Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy,
  Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
  Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann,
  Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G.
  Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur,
  David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic
  Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva,
  Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh
  Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
  Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
  Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud,
  Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee,
  Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann,
  Vaibhav Jain, Vasyl Gomonovych"

* tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits)
  powerpc/mm/radix: Fix build error when RADIX_MMU=n
  macintosh/ams-input: Use true and false for boolean values
  macintosh: change some data types from int to bool
  powerpc/watchdog: Print the NIP in soft_nmi_interrupt()
  powerpc/watchdog: regs can't be null in soft_nmi_interrupt()
  powerpc/watchdog: Tweak watchdog printks
  powerpc/cell: Remove axonram driver
  rtc-opal: Fix handling of firmware error codes, prevent busy loops
  powerpc/mpc52xx_gpt: make use of raw_spinlock variants
  macintosh/adb: Properly mark continued kernel messages
  powerpc/pseries: Fix cpu hotplug crash with memoryless nodes
  powerpc/numa: Ensure nodes initialized for hotplug
  powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
  powerpc/kernel: Block interrupts when updating TIDR
  powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn
  powerpc/mm/nohash: do not flush the entire mm when range is a single page
  powerpc/pseries: Add Initialization of VF Bars
  powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV
  powerpc/eeh: Add EEH notify resume sysfs
  powerpc/eeh: Add EEH operations to notify resume
  ...
2018-02-02 10:01:04 -08:00
Linus Torvalds
367b0df173 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:

 - StrongARM SA1111 updates to modernise and remove cruft

 - Add StrongARM gpio drivers for board GPIOs

 - Verify size of zImage is what we expect to avoid issues with
   appended DTB

 - nommu updates from Vladimir Murzin

 - page table read-write-execute checking from Jinbum Park

 - Broadcom Brahma-B15 cache updates from Florian Fainelli

 - Avoid failure with kprobes test caused by inappropriately
   placed kprobes

 - Remove __memzero optimisation (which was incorrectly being
   used directly by some drivers)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 8745/1: get rid of __memzero()
  ARM: 8744/1: don't discard memblock for kexec
  ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
  ARM: 8742/1: Always use REFCOUNT_FULL
  ARM: 8741/1: B15: fix unused label warnings
  ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array
  ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
  ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU
  ARM: 8737/1: mm: dump: add checking for writable and executable
  ARM: 8736/1: mm: dump: make the page table dumping seq_file
  ARM: 8735/1: mm: dump: make page table dumping reusable
  ARM: sa1100/neponset: add GPIO drivers for control and modem registers
  ARM: sa1100/assabet: add BCR/BSR GPIO driver
  ARM: 8734/1: mm: idmap: Mark variables as ro_after_init
  ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init
  ARM: 8732/1: NOMMU: Allow userspace to access background MPU region
  ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code
  ARM: 8728/1: B15: Register reboot notifier for KEXEC
  ARM: 8730/1: B15: Add suspend/resume hooks
  ARM: 8726/1: B15: Add CPU hotplug awareness
  ...
2018-02-02 09:50:51 -08:00
Linus Torvalds
44644391ff Microblaze patches for 4.16-rc1
- Fix endian handling and Kconfig dependency
 - Fix iounmap prototype
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlp0BlEACgkQykllyylKDCGNMQCdElmllSr708zjfx7ZjZUrhISA
 90MAn2dEe6gYItAHFrocm/f4rvEL01TX
 =+DXH
 -----END PGP SIGNATURE-----

Merge tag 'microblaze-4.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull microblaze updates from Michal Simek:

 - Fix endian handling and Kconfig dependency

 - Fix iounmap prototype

* tag 'microblaze-4.16-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Setup proper dependency for optimized lib functions
  microblaze: fix iounmap prototype
  microblaze: fix endian handling
2018-02-02 09:48:36 -08:00
Pablo Neira Ayuso
992cfc7c5d netfilter: nft_flow_offload: no need to flush entries on module removal
nft_flow_offload module removal does not require to flush existing
flowtables, it is valid to remove this module while keeping flowtables
around.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 18:26:43 +01:00
Pablo Neira Ayuso
c7f0030b5b netfilter: nft_flow_offload: wait for garbage collector to run after cleanup
If netdevice goes down, then flowtable entries are scheduled to be
removed. Wait for garbage collector to have a chance to run so it can
delete them from the hashtable.

The flush call might sleep, so hold the nfnl mutex from
nft_flow_table_iterate() instead of rcu read side lock. The use of the
nfnl mutex is also implicitly fixing races between updates via nfnetlink
and netdevice event.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 18:26:42 +01:00
Cong Wang
ba7cd5d95f netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1()
xt_cgroup_info_v1->priv is an internal pointer only used for kernel,
we should not trust what user-space provides.

Reported-by: <syzbot+4fbcfcc0d2e6592bd641@syzkaller.appspotmail.com>
Fixes: c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 18:26:37 +01:00
Eric Biggers
8dbfb2bf1b KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
Due to a bad merge resolution between commit f298103359 ("KVM/x86:
Check input paging mode when cs.l is set") and commit b4ef9d4e8c
("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl_set_sregs"),
there is a case in kvm_arch_vcpu_ioctl_set_sregs() where vcpu_put() is
not called after vcpu_get().  Fix it.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-02 17:49:55 +01:00
Filipe Manana
627e08738e Btrfs: fix null pointer dereference when replacing missing device
When we are replacing a missing device we mount the filesystem with the
degraded mode option in which case we are allowed to have a btrfs device
structure without a backing device member (its bdev member is NULL) and
therefore we can't dereference that member. Commit 38b5f68e98
("btrfs: drop btrfs_device::can_discard to query directly") started to
dereference that member when discarding extents, resulting in a null
pointer dereference:

 [ 3145.322257] BTRFS warning (device sdf): devid 2 uuid 4d922414-58eb-4880-8fed-9c3840f6c5d5 is missing
 [ 3145.364116] BTRFS info (device sdf): dev_replace from <missing disk> (devid 2) to /dev/sdg started
 [ 3145.413489] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
 [ 3145.415085] IP: btrfs_discard_extent+0x6a/0xf8 [btrfs]
 [ 3145.415085] PGD 0 P4D 0
 [ 3145.415085] Oops: 0000 [#1] PREEMPT SMP PTI
 [ 3145.415085] Modules linked in: ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper evdev psmouse parport_pc serio_raw i2c_piix4 i2
 [ 3145.415085] CPU: 0 PID: 11989 Comm: btrfs Tainted: G        W        4.15.0-rc9-btrfs-next-55+ #1
 [ 3145.415085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [ 3145.415085] RIP: 0010:btrfs_discard_extent+0x6a/0xf8 [btrfs]
 [ 3145.415085] RSP: 0018:ffffc90004813c60 EFLAGS: 00010293
 [ 3145.415085] RAX: ffff88020d39cc00 RBX: ffff88020c4ea2a0 RCX: 0000000000000002
 [ 3145.415085] RDX: 0000000000000000 RSI: ffff88020c4ea240 RDI: 0000000000000000
 [ 3145.415085] RBP: 0000000000000000 R08: 0000000000004000 R09: 0000000000000000
 [ 3145.415085] R10: ffffc90004813ae8 R11: 0000000000000000 R12: 0000000000000000
 [ 3145.415085] R13: ffff88020c418000 R14: 0000000000000000 R15: 0000000000000000
 [ 3145.415085] FS:  00007f565681f8c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [ 3145.415085] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [ 3145.415085] CR2: 00000000000000e0 CR3: 000000020d208006 CR4: 00000000001606f0
 [ 3145.415085] Call Trace:
 [ 3145.415085]  btrfs_finish_extent_commit+0x9a/0x1be [btrfs]
 [ 3145.415085]  btrfs_commit_transaction+0x649/0x7a0 [btrfs]
 [ 3145.415085]  ? start_transaction+0x2b0/0x3b3 [btrfs]
 [ 3145.415085]  btrfs_dev_replace_start+0x274/0x30c [btrfs]
 [ 3145.415085]  btrfs_dev_replace_by_ioctl+0x45/0x59 [btrfs]
 [ 3145.415085]  btrfs_ioctl+0x1a91/0x1d62 [btrfs]
 [ 3145.415085]  ? lock_acquire+0x16a/0x1af
 [ 3145.415085]  ? vfs_ioctl+0x1b/0x28
 [ 3145.415085]  ? trace_hardirqs_on_caller+0x14c/0x1a6
 [ 3145.415085]  vfs_ioctl+0x1b/0x28
 [ 3145.415085]  do_vfs_ioctl+0x5a9/0x5e0
 [ 3145.415085]  ? _raw_spin_unlock_irq+0x34/0x46
 [ 3145.415085]  ? entry_SYSCALL_64_fastpath+0x5/0x8b
 [ 3145.415085]  ? trace_hardirqs_on_caller+0x14c/0x1a6
 [ 3145.415085]  SyS_ioctl+0x52/0x76
 [ 3145.415085]  entry_SYSCALL_64_fastpath+0x1e/0x8b
 [ 3145.415085] RIP: 0033:0x7f56558b3c47
 [ 3145.415085] RSP: 002b:00007ffdcfac4c58 EFLAGS: 00000202
 [ 3145.415085] Code: be 02 00 00 00 4c 89 ef e8 b9 e7 03 00 85 c0 89 c5 75 75 48 8b 44 24 08 45 31 f6 48 8d 58 60 eb 52 48 8b 03 48 8b b8 a0 00 00 00 <48> 8b 87 e0 00
 [ 3145.415085] RIP: btrfs_discard_extent+0x6a/0xf8 [btrfs] RSP: ffffc90004813c60
 [ 3145.415085] CR2: 00000000000000e0
 [ 3145.458185] ---[ end trace 06302e7ac31902bf ]---

This is trivially reproduced by running the test btrfs/027 from fstests
like this:

  $ MOUNT_OPTIONS="-o discard" ./check btrfs/027

Fix this by skipping devices without a backing device before attempting
to discard.

Fixes: 38b5f68e98 ("btrfs: drop btrfs_device::can_discard to query directly")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:25:44 +01:00
Zygo Blaxell
c8195a7b1a btrfs: remove spurious WARN_ON(ref->count < 0) in find_parent_nodes
Until v4.14, this warning was very infrequent:

	WARNING: CPU: 3 PID: 18172 at fs/btrfs/backref.c:1391 find_parent_nodes+0xc41/0x14e0
	Modules linked in: [...]
	CPU: 3 PID: 18172 Comm: bees Tainted: G      D W    L  4.11.9-zb64+ #1
	Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2101    12/02/2014
	Call Trace:
	 dump_stack+0x85/0xc2
	 __warn+0xd1/0xf0
	 warn_slowpath_null+0x1d/0x20
	 find_parent_nodes+0xc41/0x14e0
	 __btrfs_find_all_roots+0xad/0x120
	 ? extent_same_check_offsets+0x70/0x70
	 iterate_extent_inodes+0x168/0x300
	 iterate_inodes_from_logical+0x87/0xb0
	 ? iterate_inodes_from_logical+0x87/0xb0
	 ? extent_same_check_offsets+0x70/0x70
	 btrfs_ioctl+0x8ac/0x2820
	 ? lock_acquire+0xc2/0x200
	 do_vfs_ioctl+0x91/0x700
	 ? __fget+0x112/0x200
	 SyS_ioctl+0x79/0x90
	 entry_SYSCALL_64_fastpath+0x23/0xc6
	 ? trace_hardirqs_off_caller+0x1f/0x140

Starting with v4.14 (specifically 86d5f99442 ("btrfs: convert prelimary
reference tracking to use rbtrees")) the WARN_ON occurs three orders of
magnitude more frequently--almost once per second while running workloads
like bees.

Replace the WARN_ON() with a comment rationale for its removal.
The rationale is paraphrased from an explanation by Edmund Nadolski
<enadolski@suse.de> on the linux-btrfs mailing list.

Fixes: 8da6d5815c ("Btrfs: added btrfs_find_all_roots()")
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:25:33 +01:00
Nikolay Borisov
952bd3db0d btrfs: Ignore errors from btrfs_qgroup_trace_extent_post
Running generic/019 with qgroups on the scratch device enabled is almost
guaranteed to trigger the BUG_ON in btrfs_free_tree_block. It's supposed
to trigger only on -ENOMEM, in reality, however, it's possible to get
-EIO from btrfs_qgroup_trace_extent_post. This function just finds the
roots of the extent being tracked and sets the qrecord->old_roots list.
If this operation fails nothing critical happens except the quota
accounting can be considered wrong. In such case just set the
INCONSISTENT flag for the quota and print a warning, rather than killing
off the system. Additionally, it's possible to trigger a BUG_ON in
btrfs_truncate_inode_items as well.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ error message adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:25:14 +01:00
Liu Bo
900c998168 Btrfs: fix unexpected -EEXIST when creating new inode
The highest objectid, which is assigned to new inode, is decided at
the time of initializing fs roots.  However, in cases where log replay
gets processed, the btree which fs root owns might be changed, so we
have to search it again for the highest objectid, otherwise creating
new inode would end up with -EEXIST.

cc: <stable@vger.kernel.org> v4.4-rc6+
Fixes: f32e48e925 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:53 +01:00
Liu Bo
1a932ef4e4 Btrfs: fix use-after-free on root->orphan_block_rsv
I got these from running generic/475,

WARNING: CPU: 0 PID: 26384 at fs/btrfs/inode.c:3326 btrfs_orphan_commit_root+0x1ac/0x2b0 [btrfs]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: btrfs_block_rsv_release+0x1c/0x70 [btrfs]
Call Trace:
  btrfs_orphan_release_metadata+0x9f/0x200 [btrfs]
  btrfs_orphan_del+0x10d/0x170 [btrfs]
  btrfs_setattr+0x500/0x640 [btrfs]
  notify_change+0x7ae/0x870
  do_truncate+0xca/0x130
  vfs_truncate+0x2ee/0x3d0
  do_sys_truncate+0xaf/0xf0
  SyS_truncate+0xe/0x10
  entry_SYSCALL_64_fastpath+0x1f/0x96

The race is between btrfs_orphan_commit_root and btrfs_orphan_del,
        t1                                        t2
btrfs_orphan_commit_root                     btrfs_orphan_del
   spin_lock
   check (&root->orphan_inodes)
   root->orphan_block_rsv = NULL;
   spin_unlock
                                             atomic_dec(&root->orphan_inodes);
                                             access root->orphan_block_rsv

Accessing root->orphan_block_rsv must be done before decreasing
root->orphan_inodes.

cc: <stable@vger.kernel.org> v3.12+
Fixes: 703c88e035 ("Btrfs: fix tracking of orphan inode count")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:40 +01:00
Liu Bo
e8f1bc1493 Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly
This regression is introduced in
commit 3d48d9810d ("btrfs: Handle uninitialised inode eviction").

There are two problems,

a) it is ->destroy_inode() that does the final free on inode, not
   ->evict_inode(),
b) clear_inode() must be called before ->evict_inode() returns.

This could end up hitting BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
in evict() because I_CLEAR is set in clear_inode().

Fixes: commit 3d48d9810d ("btrfs: Handle uninitialised inode eviction")
Cc: <stable@vger.kernel.org> # v4.7-rc6+
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:35 +01:00
Liu Bo
55237a5f24 Btrfs: fix extent state leak from tree log
It's possible that btrfs_sync_log() bails out after one of the two
btrfs_write_marked_extents() which convert extent state's state bit into
EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY
and EXTENT_NEW are searched by free_log_tree() so that those extent states
with EXTENT_NEED_WAIT lead to memory leak.

cc: <stable@vger.kernel.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:30 +01:00
Liu Bo
1846430c24 Btrfs: fix crash due to not cleaning up tree log block's dirty bits
In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,

umount
 -> close_ctree
    -> stop workers
    -> iput(btree_inode)
       -> iput_final
          -> write_inode_now
	     -> ...
	       -> queue job on stop'd workers

cc: <stable@vger.kernel.org> v3.12+
Fixes: 681ae50917 ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:24 +01:00
Liu Bo
e89166990f Btrfs: fix deadlock in run_delalloc_nocow
@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.

cc: <stable@vger.kernel.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-02 16:24:19 +01:00
Arnd Bergmann
1d51877578 block: skd: fix incorrect linux/slab_def.h inclusion
skd includes slab_def.h to get access to the slab cache object size.
However, including this header breaks when we use SLUB or SLOB instead of
the SLAB allocator, since the structure layout is completely different,
as shown by this warning when we build this driver in one of the invalid
configurations with link-time optimizations enabled:

include/linux/slab.h:715:0: error: type of 'kmem_cache_size' does not match original declaration [-Werror=lto-type-mismatch]
 unsigned int kmem_cache_size(struct kmem_cache *s);

mm/slab_common.c:77:14: note: 'kmem_cache_size' was previously declared here
 unsigned int kmem_cache_size(struct kmem_cache *s)
              ^
mm/slab_common.c:77:14: note: code may be misoptimized unless -fno-strict-aliasing is used
include/linux/slab.h:147:0: error: type of 'kmem_cache_destroy' does not match original declaration [-Werror=lto-type-mismatch]
 void kmem_cache_destroy(struct kmem_cache *);

mm/slab_common.c:858:6: note: 'kmem_cache_destroy' was previously declared here
 void kmem_cache_destroy(struct kmem_cache *s)
      ^
mm/slab_common.c:858:6: note: code may be misoptimized unless -fno-strict-aliasing is used
include/linux/slab.h:140:0: error: type of 'kmem_cache_create' does not match original declaration [-Werror=lto-type-mismatch]
 struct kmem_cache *kmem_cache_create(const char *name, size_t size,

mm/slab_common.c:534:1: note: 'kmem_cache_create' was previously declared here
 kmem_cache_create(const char *name, size_t size, size_t align,
 ^

This removes the header inclusion and instead uses the kmem_cache_size()
interface to get the size in a reliable way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-02 08:07:45 -07:00
Ulf Magnusson
1b9eda2e48 kconfig: Warn if help text is blank
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to flag them, IMO.

Example warning:

	drivers/mmc/host/Kconfig:877: warning: 'MMC_TOSHIBA_PCI' defined with blank help text

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-03 00:02:19 +09:00
Ulf Magnusson
e191603136 nios2: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-03 00:02:11 +09:00
Kemi Wang
60f91826ca buffer: Avoid setting buffer bits that are already set
It's expensive to set buffer flags that are already set, because that
causes a costly cache line transition.

A common case is setting the "verified" flag during ext4 writes.
This patch checks for the flag being set first.

With the AIM7/creat-clo benchmark testing on a 48G ramdisk based-on ext4
file system, we see 3.3%(15431->15936) improvement of aim7.jobs-per-min on
a 2-sockets broadwell platform.

What the benchmark does is: it forks 3000 processes, and each  process do
the following:
a) open a new file
b) close the file
c) delete the file
until loop=100*1000 times.

The original patch is contributed by Andi Kleen.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kemi Wang <kemi.wang@intel.com>
Signed-off-by: Kemi Wang <kemi.wang@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-02 07:56:30 -07:00
Jani Nikula
d67c0ac19f drm/i915: reduce indent in pch detection
Save some horizontal space.

Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202130416.18233-1-jani.nikula@intel.com
2018-02-02 16:55:30 +02:00
Ulf Magnusson
ca961dde8b arm: vt8500: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
af99adfb09 MIPS: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
edcaa93680 MIPS: BCM63XX: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
e0371b8be7 lib/Kconfig.debug: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
3d77e390a5 Staging: rtl8192e: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
1cab370d02 Staging: rtl8192u: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
7a6b7908f1 mmc: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ulf Magnusson
e9829ac4e5 video: fbdev: kconfig: Remove blank help text
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).

Best to remove them, IMO.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-02 23:53:10 +09:00
Ville Syrjälä
bc4fde30e5 drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> #irc
2018-02-02 16:52:24 +02:00
Ville Syrjälä
b46a24bcc2 drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-02-02 16:50:28 +02:00
Michal Wajdeczko
fae919f076 drm/i915: Enable inject_load_failure only in DEBUG config
We're using i915_inject_load_failure() to inject dummy
faults during driver load, but since this is debug utility
we shouldn't expose it in default config as it consumes
both code and data.

add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302)
Function                                     old     new   delta
__i915_inject_load_failure                    61       -     -61
i915_gem_init                               1331    1268     -63
i915_driver_load                            5923    5745    -178
Total: Before=1177454, After=1177152, chg -0.03%

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4)
Data                                         old     new   delta
i915_load_fail_count                           4       -      -4
Total: Before=56762, After=56758, chg -0.01%

add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346)
RO Data                                      old     new   delta
__param_str_inject_load_failure               20       -     -20
__UNIQUE_ID_inject_load_failuretype200        34       -     -34
__param_inject_load_failure                   40       -     -40
__func__                                    4998    4896    -102
__UNIQUE_ID_inject_load_failure201           150       -    -150
Total: Before=119095, After=118749, chg -0.29%

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-02-02 14:19:05 +00:00
Pablo Neira Ayuso
6be3bcd75a netfilter: flowtable infrastructure depends on NETFILTER_INGRESS
config NF_FLOW_TABLE depends on NETFILTER_INGRESS. If users forget to
enable this toggle, flowtable registration fails with EOPNOTSUPP.

Moreover, turn 'select NF_FLOW_TABLE' in every flowtable family flavour
into dependency instead, otherwise this new dependency on
NETFILTER_INGRESS causes a warning. This also allows us to remove the
explicit dependency between family flowtables <-> NF_TABLES and
NF_CONNTRACK, given they depend on the NF_FLOW_TABLE core that already
expresses the general dependencies for this new infrastructure.

Moreover, NF_FLOW_TABLE_INET depends on NF_FLOW_TABLE_IPV4 and
NF_FLOWTABLE_IPV6, which already depends on NF_FLOW_TABLE. So we can get
rid of direct dependency with NF_FLOW_TABLE.

In general, let's avoid 'select', it just makes things more complicated.

Reported-by: John Crispin <john@phrozen.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 13:21:48 +01:00
Subash Abhinov Kasiviswanathan
ea23d5e3bf netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure
Failures were seen in ICMPv6 fragmentation timeout tests if they were
run after the RFC2460 failure tests. Kernel was not sending out the
ICMPv6 fragment reassembly time exceeded packet after the fragmentation
reassembly timeout of 1 minute had elapsed.

This happened because the frag queue was not released if an error in
IPv6 fragmentation header was detected by RFC2460.

Fixes: 83f1999cae ("netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 12:45:17 +01:00