SCX_HAS_OP() tests scx_root->has_op bitmap. The bitmap is currently in a
statically allocated struct scx_sched and initialized while loading the BPF
scheduler and cleared while unloading, and thus can be tested anytime.
However, scx_root will be switched to dynamic allocation and thus won't
always be deferenceable.
Most usages of SCX_HAS_OP() are already protected by scx_enabled() either
directly or indirectly (e.g. through a task which is on SCX). However, there
are a couple places that could try to dereference NULL scx_root. Update them
so that scx_root is guaranteed to be valid before SCX_HAS_OP() is called.
- In handle_hotplug(), test whether scx_root is NULL before doing anything
else. This is safe because scx_root updates will be protected by
cpus_read_lock().
- In scx_tg_offline(), test scx_cgroup_enabled before invoking SCX_HAS_OP(),
which should guarnatee that scx_root won't turn NULL. This is also in line
with other cgroup operations. As the code path is synchronized against
scx_cgroup_init/exit() through scx_cgroup_rwsem, this shouldn't cause any
behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
To support multiple scheduler instances, collect some of the global
variables that should be specific to a scheduler instance into the new
struct scx_sched. scx_root is the root scheduler instance and points to a
static instance of struct scx_sched. Except for an extra dereference through
the scx_root pointer, this patch makes no functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
The ops.cpu_online() and ops.cpu_offline() callbacks incorrectly assume
that the rq involved in the operation is locked, which is not the case
during hotplug, triggering the following warning:
WARNING: CPU: 1 PID: 20 at kernel/sched/sched.h:1504 handle_hotplug+0x280/0x340
Fix by not tracking the target rq as locked in the context of
ops.cpu_online() and ops.cpu_offline().
Fixes: 18853ba782 ("sched_ext: Track currently locked rq")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some kfuncs specific to the idle CPU selection policy are registered in
both the scx_kfunc_ids_any and scx_kfunc_ids_idle blocks, even though
they should only be defined in the latter.
Remove the duplicates from scx_kfunc_ids_any.
Fixes: 337d1b354a ("sched_ext: Move built-in idle CPU selection policy to a separate file")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The ops.running() and ops.stopping() callbacks can be invoked from a CPU
other than the one the task is assigned to, particularly when a task
property is changed, as both scx_next_task_scx() and dequeue_task_scx() may
run on CPUs different from the task's target CPU.
This behavior can lead to confusion or incorrect assumptions if not
properly clarified, potentially resulting in bugs (see [1]).
Therefore, update the documentation to clarify this aspect and advise
users to use scx_bpf_task_cpu() to determine the actual CPU the task
will run on or was running on.
[1] https://github.com/sched-ext/scx/pull/1728
Cc: Jake Hillion <jake@hillion.co.uk>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
a11d6784d7 ("sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()")
added a call to scx_ops_error() which was renamed to scx_error() in
for-6.16. Fix it up.
scx_bpf_cpuperf_set() can be used to set a performance target level on
any CPU. However, it doesn't correctly acquire the corresponding rq
lock, which may lead to unsafe behavior and trigger the following
warning, due to the lockdep_assert_rq_held() check:
[ 51.713737] WARNING: CPU: 3 PID: 3899 at kernel/sched/sched.h:1512 scx_bpf_cpuperf_set+0x1a0/0x1e0
...
[ 51.713836] Call trace:
[ 51.713837] scx_bpf_cpuperf_set+0x1a0/0x1e0 (P)
[ 51.713839] bpf_prog_62d35beb9301601f_bpfland_init+0x168/0x440
[ 51.713841] bpf__sched_ext_ops_init+0x54/0x8c
[ 51.713843] scx_ops_enable.constprop.0+0x2c0/0x10f0
[ 51.713845] bpf_scx_reg+0x18/0x30
[ 51.713847] bpf_struct_ops_link_create+0x154/0x1b0
[ 51.713849] __sys_bpf+0x1934/0x22a0
Fix by properly acquiring the rq lock when possible or raising an error
if we try to operate on a CPU that is not the one currently locked.
Fixes: d86adb4fc0 ("sched_ext: Add cpuperf support")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some kfuncs provided by sched_ext may need to operate on a struct rq,
but they can be invoked from various contexts, specifically, different
scx callbacks.
While some of these callbacks are invoked with a particular rq already
locked, others are not. This makes it impossible for a kfunc to reliably
determine whether it's safe to access a given rq, triggering potential
bugs or unsafe behaviors, see for example [1].
To address this, track the currently locked rq whenever a sched_ext
callback is invoked via SCX_CALL_OP*().
This allows kfuncs that need to operate on an arbitrary rq to retrieve
the currently locked one and apply the appropriate action as needed.
[1] https://lore.kernel.org/lkml/20250325140021.73570-1-arighi@nvidia.com/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add helper for refilling task with default slice and event
statistics accordingly.
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX_EV_ENQ_SLICE_DFL gives the impression that the event only occurs
when the tasks were enqueued, which seems not accurate. What it actually
means is the refilling with defalt slice, and this can occur either when
enqueue or pick_task. Let's change the variable to
SCX_EV_REFILL_SLICE_DFL.
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify the tools/sched_ext/Makefile to better handle cross-compilation
environments by:
1. Fix host tools build directory structure by separating obj/ from output
(HOST_BUILD_DIR now points to $(OBJ_DIR)/host/obj)
2. Properly propagate CROSS_COMPILE to libbpf sub-make invocation
3. Add missing $(HOST_BPFOBJ) build rule with proper host toolchain flags
(ARCH=, CROSS_COMPILE=, explicit HOSTCC/HOSTLD)
4. Consistently quote $(HOSTCC) in bpftool build rule
5. Change LDFLAGS assignment to += to allow external extensions
The changes ensure proper cross-compilation behavior while maintaining
backward compatibility with native builds. Host tools are now correctly
built with the host toolchain while target binaries use the cross-toolchain.
Signed-off-by: yangsonghua <yangsonghua@lixiang.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_has_op is used to encode which ops are implemented by the BPF scheduler
into an array of static_keys. While this saves a bit of branching overhead,
that is unlikely to be noticeable compared to the overall cost. As the
global static_keys can't work with the planned hierarchical multiple
scheduler support, replace the static_key array with a bitmap.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_allow_queued_wakeup is used to encode SCX_OPS_ALLOW_QUEUED_WAKEUP
into a static_key. The test is gated behind scx_enabled(), and, even when
sched_ext is enabled, is unlikely for the static_key usage to make any
meaningful difference. It is made to use a static_key mostly because there
was no reason not to. However, global static_keys can't work with the
planned hierarchical multiple scheduler support. Remove the static_key and
instead test SCX_OPS_ALLOW_QUEUED_WAKEUP directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_cpu_preempt is used to encode whether ops.cpu_acquire/release() are
implemented into a static_key. These tests aren't hot enough for static_key
usage to make any meaningful difference and are made to use a static_key
mostly because there was no reason not to. However, global static_keys can't
work with the planned hierarchical multiple scheduler support. Remove the
static_key and instead use an internal ops flag SCX_OPS_HAS_CPU_PREEMPT to
record and test whether ops.cpu_acquire/release() are implemented.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_enq_last/exiting/migration_disabled are used to encode the
corresponding SCX_OPS_ flags into static_keys. These flags aren't hot enough
for static_key usage to make any meaningful difference and are made
static_keys mostly because there was no reason not to. However, global
static_keys can't work with the planned hierarchical multiple scheduler
support. Remove the static_keys and test the ops flags directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Pull for-6.15-fixes to receive:
e776b26e37 ("sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings")
which conflicts with:
1a7ff7216c ("sched_ext: Drop "ops" from scx_ops_enable_state and friends")
The former removes code updated by the latter. Resolved by removing the
updated section.
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX_OPS_HAS_CGROUP_WEIGHT was only used to suppress the missing cgroup
weight support warnings. Now that the warnings are removed, the flag doesn't
do anything. Mark it for deprecation and remove its usage from scx_flatcg.
v2: Actually include the scx_flatcg update.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext generates warnings when cpu.weight / cpu.idle are set to
non-default values if the BPF scheduler doesn't implement weight support.
These warnings don't provide much value while adding constant annoyance. A
BPF scheduler may not implement any particular behavior and there's nothing
particularly special about missing cgroup weight support. Drop the warnings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace kzalloc with kvzalloc for the exit_dump buffer allocation, which
can require large contiguous memory depending on the implementation.
This change prevents allocation failures by allowing the system to fall
back to vmalloc when contiguous memory allocation fails.
Since this buffer is only used for debugging purposes, physical memory
contiguity is not required, making vmalloc a suitable alternative.
Cc: stable@vger.kernel.org
Fixes: 07814a9439 ("sched_ext: Print debug dump after an error exit")
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a selftest to validate the behavior of the built-in idle CPU
selection policy applied to a subset of allowed CPUs, using
scx_bpf_select_cpu_and().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide a new kfunc, scx_bpf_select_cpu_and(), that can be used to apply
the built-in idle CPU selection policy to a subset of allowed CPU.
This new helper is basically an extension of scx_bpf_select_cpu_dfl().
However, when an idle CPU can't be found, it returns a negative value
instead of @prev_cpu, aligning its behavior more closely with
scx_bpf_pick_idle_cpu().
It also accepts %SCX_PICK_IDLE_* flags, which can be used to enforce
strict selection to @prev_cpu's node (%SCX_PICK_IDLE_IN_NODE), or to
request only a full-idle SMT core (%SCX_PICK_IDLE_CORE), while applying
the built-in selection logic.
With this helper, BPF schedulers can apply the built-in idle CPU
selection policy restricted to any arbitrary subset of CPUs.
Example usage
=============
Possible usage in ops.select_cpu():
s32 BPF_STRUCT_OPS(foo_select_cpu, struct task_struct *p,
s32 prev_cpu, u64 wake_flags)
{
const struct cpumask *cpus = task_allowed_cpus(p) ?: p->cpus_ptr;
s32 cpu;
cpu = scx_bpf_select_cpu_and(p, prev_cpu, wake_flags, cpus, 0);
if (cpu >= 0) {
scx_bpf_dsq_insert(p, SCX_DSQ_LOCAL, SCX_SLICE_DFL, 0);
return cpu;
}
return prev_cpu;
}
Results
=======
Load distribution on a 4 sockets, 4 cores per socket system, simulated
using virtme-ng, running a modified version of scx_bpfland that uses
scx_bpf_select_cpu_and() with 0xff00 as the allowed subset of CPUs:
$ vng --cpu 16,sockets=4,cores=4,threads=1
...
$ stress-ng -c 16
...
$ htop
...
0[ 0.0%] 8[||||||||||||||||||||||||100.0%]
1[ 0.0%] 9[||||||||||||||||||||||||100.0%]
2[ 0.0%] 10[||||||||||||||||||||||||100.0%]
3[ 0.0%] 11[||||||||||||||||||||||||100.0%]
4[ 0.0%] 12[||||||||||||||||||||||||100.0%]
5[ 0.0%] 13[||||||||||||||||||||||||100.0%]
6[ 0.0%] 14[||||||||||||||||||||||||100.0%]
7[ 0.0%] 15[||||||||||||||||||||||||100.0%]
With scx_bpf_select_cpu_dfl() tasks would be distributed evenly across
all the available CPUs.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Many scx schedulers implement their own hard or soft-affinity rules
to support topology characteristics, such as heterogeneous architectures
(e.g., big.LITTLE, P-cores/E-cores), or to categorize tasks based on
specific properties (e.g., running certain tasks only in a subset of
CPUs).
Currently, there is no mechanism that allows to use the built-in idle
CPU selection policy to an arbitrary subset of CPUs. As a result,
schedulers often implement their own idle CPU selection policies, which
are typically similar to one another, leading to a lot of code
duplication.
To address this, modify scx_select_cpu_dfl() to accept an arbitrary
cpumask, that can be used by the BPF schedulers to apply the existent
built-in idle CPU selection policy to a subset of allowed CPUs.
With this concept the idle CPU selection policy becomes the following:
- always prioritize CPUs from fully idle SMT cores (if SMT is enabled),
- select the same CPU if it's idle and in the allowed CPUs,
- select an idle CPU within the same LLC, if the LLC cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the same node, if the node cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the allowed CPUs.
This functionality will be exposed through a dedicated kfunc in a
separate patch.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify scx_select_cpu_dfl() to take the allowed cpumask as an explicit
argument, instead of implicitly using @p->cpus_ptr.
This prepares for future changes where arbitrary cpumasks may be passed
to the built-in idle CPU selection policy.
This is a pure refactoring with no functional changes.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The built-in idle selection policy, scx_select_cpu_dfl(), always
prioritizes picking idle CPUs within the same LLC or NUMA node, but
these optimizations are currently applied only when a task has no CPU
affinity constraints.
This is done primarily for efficiency, as it avoids the overhead of
updating a cpumask every time we need to select an idle CPU (which can
be costly in large SMP systems).
However, this approach limits the effectiveness of the built-in idle
policy and results in inconsistent behavior, as affinity-restricted
tasks don't benefit from topology-aware optimizations.
To address this, modify the policy to apply LLC and NUMA-aware
optimizations even when a task is constrained to a subset of CPUs.
We can still avoid updating the cpumasks by checking if the subset of
LLC and node CPUs are contained in the subset of allowed CPUs usable by
the task (which is true in most of the cases - for tasks that don't have
affinity constratints).
Moreover, use temporary local per-CPU cpumasks to determine the LLC and
node subsets, minimizing potential overhead even on large SMP systems.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from SCX_OPS_TASK_ITER_BATCH.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_{init|exit|enable|disable}[_task]() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_exit(), scx_ops_error() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_bypass(), scx_ops_breather() and friends. Update
scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_helper, scx_ops_enable_mutex and __scx_ops_enabled.
Update scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_enable_state and friends. Update scx_show_state.py
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Current release - regressions:
- 4 fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so that
the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=phQZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
A small collection of fixes that came in during the merge window,
everything is driver specific with nothing standing out particularly
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfv+J8ACgkQJNaLcl1U
h9BKOAf+J7RJdC80Tw3uBWQ3GE608sL9aKGSKe97oe6HYOYWoaiIQH3G0FIkfyL2
qRy8e737FZ9wf0mwHd9AsxRca//M6KSVxdgU+C2T56W39+wfz2O9NyfOH367TDZl
FrWOGFTVZy5CTGGPgqzVp6RUm8GK4Jp0J+9DsNgRJPkSR9o5MTPFyqrFAXdfSIpB
ppoRX2HYlVulxxCSz9hVyYdYEZhuebiv9XZYgt4fGF2UbaT3S9w+E/2FP987gOf1
zwwtIUnoV23Gd4A+QglvnQ0xk46BrZWoByAkbTtLoFynk61HIZerAAT2JrDRxQVe
T2AxxYeuxYIKPFQutrTBEBecaSPQGg==
=LrNO
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the merge window,
everything is driver specific with nothing standing out particularly"
* tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835: Restore native CS probing when pinctrl-bcm2835 is absent
spi: bcm2835: Do not call gpiod_put() on invalid descriptor
spi: cadence-qspi: revert "Improve spi memory performance"
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
spi: fsl-qspi: use devm function instead of driver remove
spi: SPI_QPIC_SNAND should be tristate and depend on MTD
spi-rockchip: Fix register out of bounds access
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----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=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
Fixes:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
The following is an automated shortlog grouped by driver:
ISST:
- Correct command storage data length
MAINTAINERS:
- consistently use my dedicated email address
thinkpad_acpi:
- disable ACPI fan access for T495* and E560
- Fix NULL pointer dereferences while probing
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+/vRQAKCRBZrE9hU+XO
MStcAQDEc8URl/7qYzOV226aWHL3XeKIkb3XkFNn1klwbHAIIwD+KwNy3amvaeRX
fTNEvNngWO2jjjCSoUITgZGsLp8XcgU=
=YLB+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in route-attrs and metrics and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: 023289b4f5 ("doc/netlink: Add spec for rt route messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d9 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e5 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The spec is mis-formatted, schema validation says:
Failed validating 'type' in schema['properties']['operations']['properties']['list']['items']['properties']['dump']['properties']['request']['properties']['value']:
{'minimum': 0, 'type': 'integer'}
On instance['operations']['list'][3]['dump']['request']['value']:
'58 - ifa-family'
The ifa-family clearly wants to be part of an attribute list.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Yuyang Huang <yuyanghuang@google.com>
Fixes: 4f280376e5 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Link: https://patch.msgid.link/20250403013706.2828322-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
net: make memory provider install / close paths more common
We seem to be fixing bugs in config path for devmem which also exist
in the io_uring ZC path. Let's try to make the two paths more common,
otherwise this is bound to keep happening.
Found by code inspection and compile tested only.
v1: https://lore.kernel.org/20250331194201.2026422-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250403013405.2827250-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under Fixes solved the problem of spurious warnings when we
uninstall an MP from a device while its down. The __net_mp_close_rxq()
which is used by io_uring was not fixed. Move the fix over and reuse
__net_mp_close_rxq() in the devmem path.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250403013405.2827250-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
v2:
- Created a single error handling unlock and exit in veth_pool_store
- Greatly expanded commit message with previous explanatory-only text
Summary: Use rtnl_mutex to synchronize veth_pool_store with itself,
ibmveth_close and ibmveth_open, preventing multiple calls in a row to
napi_disable.
Background: Two (or more) threads could call veth_pool_store through
writing to /sys/devices/vio/30000002/pool*/*. You can do this easily
with a little shell script. This causes a hang.
I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new
kernel. I ran this test again and saw:
Setting pool0/active to 0
Setting pool1/active to 1
[ 73.911067][ T4365] ibmveth 30000002 eth0: close starting
Setting pool1/active to 1
Setting pool1/active to 0
[ 73.911367][ T4366] ibmveth 30000002 eth0: close starting
[ 73.916056][ T4365] ibmveth 30000002 eth0: close complete
[ 73.916064][ T4365] ibmveth 30000002 eth0: open starting
[ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds.
[ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8
[ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000
[ 243.683852][ T123] Call Trace:
[ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable)
[ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0
[ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0
[ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210
[ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50
[ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0
[ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60
[ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc
[ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270
[ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0
[ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0
[ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650
[ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150
[ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340
[ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
...
[ 243.684087][ T123] Showing all locks held in the system:
[ 243.684095][ T123] 1 lock held by khungtaskd/123:
[ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248
[ 243.684114][ T123] 4 locks held by stress.sh/4365:
[ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60
[ 243.684166][ T123] 5 locks held by stress.sh/4366:
[ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60
[ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0
From the ibmveth debug, two threads are calling veth_pool_store, which
calls ibmveth_close and ibmveth_open. Here's the sequence:
T4365 T4366
----------------- ----------------- ---------
veth_pool_store veth_pool_store
ibmveth_close
ibmveth_close
napi_disable
napi_disable
ibmveth_open
napi_enable <- HANG
ibmveth_close calls napi_disable at the top and ibmveth_open calls
napi_enable at the top.
https://docs.kernel.org/networking/napi.html]] says
The control APIs are not idempotent. Control API calls are safe
against concurrent use of datapath APIs but an incorrect sequence of
control API calls may result in crashes, deadlocks, or race
conditions. For example, calling napi_disable() multiple times in a
row will deadlock.
In the normal open and close paths, rtnl_mutex is acquired to prevent
other callers. This is missing from veth_pool_store. Use rtnl_mutex in
veth_pool_store fixes these hangs.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Fixes: 860f242eb5 ("[PATCH] ibmveth change buffer pools dynamically")
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
com20020pci_probe() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensure
no resources are left allocated.
Fixes: 6b17a597fc ("arcnet: restoring support for multiple Sohard Arcnet cards")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
ipv6: Multipath routing fixes
This patchset contains two fixes for IPv6 multipath routing. See the
commit messages for more details.
====================
Link: https://patch.msgid.link/20250402114224.293392-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nexthops whose link is down are not supposed to be considered during
path selection when the "ignore_routes_with_linkdown" sysctl is set.
This is done by assigning them a negative region boundary.
However, when comparing the computed hash (unsigned) with the region
boundary (signed), the negative region boundary is treated as unsigned,
resulting in incorrect nexthop selection.
Fix by treating the computed hash as signed. Note that the computed hash
is always in range of [0, 2^31 - 1].
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
