[ Upstream commit 0c3f135e84 ]
The Tx refillq logic will cause packets to be silently dropped if there
are not enough buffer resources available to send a packet in flow
scheduling mode. Instead, determine how many buffers are needed along
with number of descriptors. Make sure there are enough of both resources
to send the packet, and stop the queue if not.
Fixes: 7292af042b ("idpf: fix a race in txq wakeup")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f417d5513 ]
Replace the TxQ buffer ring with one large pool/array of buffers (only
for flow scheduling). This eliminates the tag generation and makes it
impossible for a tag to be associated with more than one packet.
The completion tag passed to HW through the descriptor is the index into
the array. That same completion tag is posted back to the driver in the
completion descriptor, and used to index into the array to quickly
retrieve the buffer during cleaning. In this way, the tags are treated
as a fix sized resource. If all tags are in use, no more packets can be
sent on that particular queue (until some are freed up). The tag pool
size is 64K since the completion tag width is 16 bits.
For each packet, the driver pulls a free tag from the refillq to get the
next free buffer index. When cleaning is complete, the tag is posted
back to the refillq. A multi-frag packet spans multiple buffers in the
driver, therefore it uses multiple buffer indexes/tags from the pool.
Each frag pulls from the refillq to get the next free buffer index.
These are tracked in a next_buf field that replaces the completion tag
field in the buffer struct. This chains the buffers together so that the
packet can be cleaned from the starting completion tag taken from the
completion descriptor, then from the next_buf field for each subsequent
buffer.
In case of a dma_mapping_error occurs or the refillq runs out of free
buf_ids, the packet will execute the rollback error path. This unmaps
any buffers previously mapped for the packet. Since several free
buf_ids could have already been pulled from the refillq, we need to
restore its original state as well. Otherwise, the buf_ids/tags
will be leaked and not used again until the queue is reallocated.
Descriptor completions only advance the descriptor ring index to "clean"
the descriptors. The packet completions only clean the buffers
associated with the given packet completion tag and do not update the
descriptor ring index.
When operating in queue based scheduling mode, the array still acts as a
ring and will only have TxQ descriptor count entries. The tx_bufs are
still associated 1:1 with the descriptor ring entries and we can use the
conventional indexing mechanisms.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b61dfa9bc4 ]
Move (and rename) the existing rollback logic to singleq.c since that
will be the only consumer. Create a simplified splitq specific rollback
function to loop through and unmap tx_bufs based on the completion tag.
This is critical before replacing the Tx buffer ring with the buffer
pool since the previous rollback indexing will not work to unmap the
chained buffers from the pool.
Cache the next_to_use index before any portion of the packet is put on
the descriptor ring. In case of an error, the rollback will bump tail to
the correct next_to_use value. Because the splitq path now supports
different types of context descriptors (and potentially multiple in the
future), this will take care of rolling back any and all context
descriptors encoded on the ring for the erroneous packet. The previous
rollback logic was broken for PTP packets since it would not account for
the PTP context descriptor.
Fixes: 1a49cf814f ("idpf: add Tx timestamp flows")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2d18e1647 ]
Track the gap between next_to_use and the last RE index. Set RE again
if the gap is large enough to ensure RE bit is set frequently. This is
critical before removing the stashing mechanisms because the
opportunistic descriptor ring cleaning from the out-of-order completions
will go away. Previously the descriptors would be "cleaned" by both the
descriptor (RE) completion and the out-of-order completions. Without the
latter, we must ensure the RE bit is set more frequently. Otherwise,
it's theoretically possible for the descriptor ring next_to_clean to
never advance. The previous implementation was dependent on the start
of a packet falling on a 64th index in the descriptor ring, which is not
guaranteed with large packets.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb83b559be ]
Changes from original commit:
- Adjusted idpf_tx_queue assert size to align with 6.12 struct definition
In certain production environments, it is possible for completion tags
to collide, meaning N packets with the same completion tag are in flight
at the same time. In this environment, any given Tx queue is effectively
used to send both slower traffic and higher throughput traffic
simultaneously. This is the result of a customer's specific
configuration in the device pipeline, the details of which Intel cannot
provide. This configuration results in a small number of out-of-order
completions, i.e., a small number of packets in flight. The existing
guardrails in the driver only protect against a large number of packets
in flight. The slower flow completions are delayed which causes the
out-of-order completions. The fast flow will continue sending traffic
and generating tags. Because tags are generated on the fly, the fast
flow eventually uses the same tag for a packet that is still in flight
from the slower flow. The driver has no idea which packet it should
clean when it processes the completion with that tag, but it will look
for the packet on the buffer ring before the hash table. If the slower
flow packet completion is processed first, it will end up cleaning the
fast flow packet on the ring prematurely. This leaves the descriptor
ring in a bad state resulting in a crash or Tx timeout.
In summary, generating a tag when a packet is sent can lead to the same
tag being associated with multiple packets. This can lead to resource
leaks, crashes, and/or Tx timeouts.
Before we can replace the tag generation, we need a new mechanism for
the send path to know what tag to use next. The driver will allocate and
initialize a refillq for each TxQ with all of the possible free tag
values. During send, the driver grabs the next free tag from the refillq
from next_to_clean. While cleaning the packet, the clean routine posts
the tag back to the refillq's next_to_use to indicate that it is now
free to use.
This mechanism works exactly the same way as the existing Rx refill
queues, which post the cleaned buffer IDs back to the buffer queue to be
reposted to HW. Since we're using the refillqs for both Rx and Tx now,
genericize some of the existing refillq support.
Note: the refillqs will not be used yet. This is only demonstrating how
they will be used to pass free tags back to the send path.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c1683c681 ]
There is a race condition between exiting wb_on_itr and completion write
backs. For example, we are in wb_on_itr mode and a Tx completion is
generated by HW, ready to be written back, as we are re-enabling
interrupts:
HW SW
| |
| | idpf_tx_splitq_clean_all
| | napi_complete_done
| |
| tx_completion_wb | idpf_vport_intr_update_itr_ena_irq
That tx_completion_wb happens before the vector is fully re-enabled.
Continuing with this example, it is a UDP stream and the
tx_completion_wb is the last one in the flow (there are no rx packets).
Because the HW generated the completion before the interrupt is fully
enabled, the HW will not fire the interrupt once the timer expires and
the write back will not happen. NAPI poll won't be called. We have
indicated we're back in interrupt mode but nothing else will trigger the
interrupt. Therefore, the completion goes unprocessed, triggering a Tx
timeout.
To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr.
This interrupt will catch the rogue completion and avoid the timeout.
Add logic to set the appropriate bits in the vector's dyn_ctl register.
Fixes: 9c4a27da0e ("idpf: enable WB_ON_ITR")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 93433c1d91 ]
SW triggered interrupts are guaranteed to fire after their timer
expires, unlike Tx and Rx interrupts which will only fire after the
timer expires _and_ a descriptor write back is available to be processed
by the driver.
Add the necessary fields, defines, and initializations to enable a SW
triggered interrupt in the vector's dyn_ctl register.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f6571ad47 ]
When the system suspend or resume, the WiFi driver sends
an hif_ctrl command to the firmware and waits for an event.
Due to changes in the event format reported by the chip, the
current mt7925's driver does not account for these changes,
resulting in command timeout. Add flow to handle hif_ctrl
event to avoid command timeout. We also exented API
mt76_connac_mcu_set_hif_suspend for connac3 this time.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/3a0844ff5162142c4a9f3cf7104f75076ddd3b87.1735910562.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0f721b8d9 ]
When enter suspend/resume while in a connected state, the upper layer
will trigger disconnection before entering suspend, and at the same time,
it will trigger regd_notifier() and update CLC, causing the CLC event to
not be received due to suspend, resulting in a command timeout.
Therefore, the update of CLC is postponed until resume, to ensure data
consistency and avoid the occurrence of command timeout.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/bab00a2805d0533fd8beaa059222659858a9dcb5.1735910455.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b97fc8443 ]
Before entering suspend, we need to ensure that all MCU command are
completed. In some cases, such as with regd_notifier, there is a
chance that CLC commands, will be executed before suspend.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/3af7b4e5bf7437832b016e32743657d1d55b1f9d.1735910288.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ef6e4db15 upstream.
Commit 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle
dynamically") meant that the 1920x1080 mode switched from using no
binning to using vertical binning but no horizontal binning, which
resulted in stretched pixels.
Until proper controls are available to independently select horizontal
and vertical binning, restore the original 1:1 pixel aspect ratio by
forcing binning to be uniform in both directions.
Cc: stable@vger.kernel.org
Fixes: 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle dynamically")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d17104506 upstream.
All microcode patches up to the proper BIOS Entrysign fix are loaded
only after the sha256 signature carried in the driver has been verified.
Microcode patches after the Entrysign fix has been applied, do not need
that signature verification anymore.
In order to not abandon machines which haven't received the BIOS update
yet, add the capability to select which microcode patch to load.
The corresponding microcode container supplied through firmware-linux
has been modified to carry two patches per CPU type
(family/model/stepping) so that the proper one gets selected.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20251027133818.4363-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f54151148b upstream.
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Fixes: 24ec03cc55 ("serial: core: Restore sysfs fwnode information")
Cc: stable <stable@kernel.org>
Suggested-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99a2ace61b ]
Use RCU to protect accesses to dst->dev from sk_setup_caps()
and sk_dst_gso_max_size().
Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),
and ip_dst_mtu_maybe_forward().
ip4_dst_hoplimit() can use dst_dev_net_rcu().
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250828195823.3958522-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Harshit: Backport to 6.12.y, resolve conflict due to missing commit:
22d6c9eebf ("net: Unexport shared functions for DCCP.") in 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1caf272972 ]
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Harshit: Backport to 6.12.y, pulled this is a prerequisite]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d55acb9732 ]
Be consistent and use the same terminology as other lwt users: orig_dst
is the dst_entry before the transformation, while dst is either the
dst_entry in the cache or the dst_entry after the transformation
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[Harshit: Backport to 6.12.y]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 576c930e5e ]
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
[Harshit: Resolve conflicts due to missing commit: fe69a39180
("drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs
code") in 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3db4404435 ]
raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.
Fixes: c9aa889b03 ("md: raid10 add nowait support")
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/linux-raid/20250306094938.48952-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
[Harshit: Clean backport to 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90918e3b64 ]
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding.
Fixes: 1a64edf54f ("netfilter: nft_ct: add helper set support")
Signed-off-by: Andrii Melnychenko <a.melnychenko@vyos.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
[Harshit: Clean cherry-pick, apply it to stable-6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23800ad126 ]
The ASUS ProArt PX13 has a spurious wakeup event from the touchpad
a few moments after entering hardware sleep. This can be avoided
by preventing the touchpad from being a wake source.
Add to the wakeup ignore list.
Reported-by: Amit Chaudhari <amitchaudhari@mac.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4482
Tested-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250814183430.3887973-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ab29ed505 ]
It is reported that on Acer Nitro V15 suspend only works properly if the
keyboard backlight is turned off. In looking through the issue Acer Nitro
V15 has a GPIO (#8) specified in _AEI but it has no matching notify device
in _EVT. The values for GPIO #8 change as keyboard backlight is turned on
and off.
This makes it seem that GPIO #8 is actually supposed to be solely for
keyboard backlight. Turning off the interrupt for this GPIO fixes the issue.
Add a quirk that does just that.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92dc572852 ]
The gpiolib-acpi.c is huge enough even without DMI quirks.
Move them to a separate file for a better maintenance.
No functional change intended.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5666a8777a ]
Add acpi_gpio_need_run_edge_events_on_boot() getter which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a594877663 ]
Introduce a new API and handle deferred list via it which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b24fd5bc8e ]
Switch to use enum instead of pointers in acpi_gpio_in_ignore_list()
which moves towards isolating the GPIO ACPI and quirk APIs. It will
helps splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bc3477796 ]
During f2fs_enable_checkpoint() in remount(), if we flush a large
amount of dirty pages into slow device, it may take long time which
will block write IO, let's add a timeout machanism during dirty
pages flush to avoid long time block in f2fs_enable_checkpoint().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: be112e7449 ("f2fs: fix to propagate error from f2fs_enable_checkpoint()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f88c7904b5 ]
SBI_POR_DOING can be cleared after recovery is completed, so that
changes made before recovery can be persistent, and subsequent
errors can be recorded into cp/sb.
Signed-off-by: Song Feng <songfeng@oppo.com>
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: be112e7449 ("f2fs: fix to propagate error from f2fs_enable_checkpoint()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 267ee93c41 ]
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233 ("tty: serial: uartps: Add rs485 support to uartps driver")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech
Signed-off-by: Jakub Turek <jakub.turek@elsta.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eee00df8e1 ]
The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.
Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af7823518fb060c6c97105a2513cfc61adbdf38f.1738746927.git.namcao@linutronix.de
Stable-dep-of: 267ee93c41 ("serial: xilinx_uartps: fix rs485 delay_rts_after_send")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f02e3563b ]
Some users of hrtimer need to change the callback function after the
initial setup. They write to hrtimer::function directly.
That's not safe under all circumstances as the write is lockless and a
concurrent timer expiry might end up using the wrong function pointer.
Introduce hrtimer_update_function(), which also performs runtime checks
whether it is safe to modify the callback.
This allows to make hrtimer::function private once all users are converted.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20a937b0ae09ad54b5b6d86eabead7c570f1b72e.1730386209.git.namcao@linutronix.de
Stable-dep-of: 267ee93c41 ("serial: xilinx_uartps: fix rs485 delay_rts_after_send")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83cbb4d33d ]
Add a mechanism for DisplayID specific quirks, and add the first quirk
to ignore DisplayID section checksum errors.
It would be quite inconvenient to pass existing EDID quirks from
drm_edid.c for DisplayID parsing. Not all places doing DisplayID
iteration have the quirks readily available, and would have to pass it
in all places. Simply add a separate array of DisplayID specific EDID
quirks. We do end up checking it every time we iterate DisplayID blocks,
but hopefully the number of quirks remains small.
There are a few laptop models with DisplayID checksum failures, leading
to higher refresh rates only present in the DisplayID blocks being
ignored. Add a quirk for the panel in the machines.
Reported-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Closes: https://lore.kernel.org/r/CACRbrPGvLP5LANXuFi6z0S7XMbAG4X5y2YOLBDxfOVtfGGqiKQ@mail.gmail.com
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14703
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/c04d81ae648c5f21b3f5b7953f924718051f2798.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5e1e5ec20 ]
move_local_task_to_local_dsq() is used when moving a task from a non-local
DSQ to a local DSQ on the same CPU. It directly manipulates the local DSQ
without going through dispatch_enqueue() and was missing the post-enqueue
handling that triggers preemption when SCX_ENQ_PREEMPT is set or the idle
task is running.
The function is used by move_task_between_dsqs() which backs
scx_bpf_dsq_move() and may be called while the CPU is busy.
Add local_dsq_post_enq() call to move_local_task_to_local_dsq(). As the
dispatch path doesn't need post-enqueue handling, add SCX_RQ_IN_BALANCE
early exit to keep consume_dispatch_q() behavior unchanged and avoid
triggering unnecessary resched when scx_bpf_dsq_move() is used from the
dispatch path.
Fixes: 4c30f5ce4f ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 530b6637c7 ]
Factor out local_dsq_post_enq() which performs post-enqueue handling for
local DSQs - triggering resched_curr() if SCX_ENQ_PREEMPT is specified or if
the current CPU is idle. No functional change.
This will be used by the next patch to fix move_local_task_to_local_dsq().
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bda1cbf73c ]
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
[ different semantics around u8 name_size() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bba4322e3f ]
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b44 ("block: Prevent potential deadlock in blk_revalidate_disk_zones()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ adapted blk_mq_freeze_queue/unfreeze_queue calls to single-argument void API ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d1bea0ce35 ]
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page.
Fixes: d7cc739726 ("svcrdma: support multiple Read chunks per RPC")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ replaced rqstp->rq_maxpages with ARRAY_SIZE(rqstp->rq_pages) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 590c03ca6a ]
Patch series "ksm: fix exec/fork inheritance", v2.
This series fixes exec/fork inheritance. See the detailed description of
the issue below.
This patch (of 2):
Background
==========
commit d7597f59d1 ("mm: add new api to enable ksm per process")
introduced MMF_VM_MERGE_ANY for mm->flags, and allowed user to set it by
prctl() so that the process's VMAs are forcibly scanned by ksmd.
Subsequently, the 3c6f33b727 ("mm/ksm: support fork/exec for prctl")
supported inheriting the MMF_VM_MERGE_ANY flag when a task calls execve().
Finally, commit 3a9e567ca4 ("mm/ksm: fix ksm exec support for prctl")
fixed the issue that ksmd doesn't scan the mm_struct with MMF_VM_MERGE_ANY
by adding the mm_slot to ksm_mm_head in __bprm_mm_init().
Problem
=======
In some extreme scenarios, however, this inheritance of MMF_VM_MERGE_ANY
during exec/fork can fail. For example, when the scanning frequency of
ksmd is tuned extremely high, a process carrying MMF_VM_MERGE_ANY may
still fail to pass it to the newly exec'd process. This happens because
ksm_execve() is executed too early in the do_execve flow (prematurely
adding the new mm_struct to the ksm_mm_slot list).
As a result, before do_execve completes, ksmd may have already performed a
scan and found that this new mm_struct has no VM_MERGEABLE VMAs, thus
clearing its MMF_VM_MERGE_ANY flag. Consequently, when the new program
executes, the flag MMF_VM_MERGE_ANY inheritance missed.
Root reason
===========
commit d7597f59d1 ("mm: add new api to enable ksm per process") clear
the flag MMF_VM_MERGE_ANY when ksmd found no VM_MERGEABLE VMAs.
Solution
========
Firstly, Don't clear MMF_VM_MERGE_ANY when ksmd found no VM_MERGEABLE
VMAs, because perhaps their mm_struct has just been added to ksm_mm_slot
list, and its process has not yet officially started running or has not
yet performed mmap/brk to allocate anonymous VMAS.
Secondly, recheck MMF_VM_MERGEABLE again if a process takes
MMF_VM_MERGE_ANY, and create a mm_slot and join it into ksm_scan_list
again.
Link: https://lkml.kernel.org/r/20251007182504440BJgK8VXRHh8TD7IGSUIY4@zte.com.cn
Link: https://lkml.kernel.org/r/20251007182821572h_SoFqYZXEP1mvWI4n9VL@zte.com.cn
Fixes: 3c6f33b727 ("mm/ksm: support fork/exec for prctl")
Fixes: d7597f59d1 ("mm: add new api to enable ksm per process")
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ changed mm_flags_test() and mm_flags_clear() calls to test_bit() and clear_bit() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ace3297a7 ]
Before this patch, the kernel was saving any flags set by the userspace,
even unknown ones. This doesn't cause critical issues because the kernel
is only looking at specific ones. But on the other hand, endpoints dumps
could tell the userspace some recent flags seem to be supported on older
kernel versions.
Instead, ignore all unknown flags when parsing them. By doing that, the
userspace can continue to set unsupported flags, but it has a way to
verify what is supported by the kernel.
Note that it sounds better to continue accepting unsupported flags not
to change the behaviour, but also that eases things on the userspace
side by adding "optional" endpoint types only supported by newer kernel
versions without having to deal with the different kernel versions.
A note for the backports: there will be conflicts in mptcp.h on older
versions not having the mentioned flags, the new line should still be
added last, and the '5' needs to be adapted to have the same value as
the last entry.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ GENMASK(5, 0) => GENMASK(4, 0) + context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 24ec03cc55 ]
The change that restores sysfs fwnode information does it only for OF cases.
Update the fix to cover all possible types of fwnodes.
Fixes: d36f0e9a00 ("serial: core: restore of_node information in sysfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251127163650.2942075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 273cc3406c ]
Make sure to drop the OF node reference taken when initialising the
control and port devices when the devices are later released.
Fixes: d36f0e9a00 ("serial: core: restore of_node information in sysfs")
Cc: Aidan Stewart <astewart@tektelic.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250708085817.16070-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 24ec03cc55 ("serial: core: Restore sysfs fwnode information")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 078cad8212 ]
Let's drop the inode from the donation list when there is no other
open file.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 10b591e7fb ("f2fs: fix to avoid updating compression context during writeback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f27ef42bb ]
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing.
Fixes: a999150f4f ("f2fs: use kmem_cache pool during inline xattr lookups")
Cc: stable@kernel.org
Reported-by: Hong Yun <yhong@link.cuhk.edu.hk>
Tested-by: Hong Yun <yhong@link.cuhk.edu.hk>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ folio => page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 68d05693f8 ]
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1 ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ folio => page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
