[ Upstream commit edc8fc01f6 ]
intel_idle_irq() re-enables IRQs very early. As a result, an interrupt
may fire before mwait() is eventually called. If such an interrupt queues
a timer, it may go unnoticed until mwait returns and the idle loop
handles the tick re-evaluation. And monitoring TIF_NEED_RESCHED doesn't
help because a local timer enqueue doesn't set that flag.
The issue is mitigated by the fact that this idle handler is only invoked
for shallow C-states when, presumably, the next tick is supposed to be
close enough. There may still be rare cases though when the next tick
is far away and the selected C-state is shallow, resulting in a timer
getting ignored for a while.
Fix this with using sti_mwait() whose IRQ-reenablement only triggers
upon calling mwait(), dealing with the race while keeping the interrupt
latency within acceptable bounds.
Fixes: c227233ad6 (intel_idle: enable interrupts before C1 on Xeons)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lkml.kernel.org/r/20231115151325.6262-3-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 055ca83559 ]
When you try to splice between a normal pipe and a notification pipe,
get_pipe_info(..., true) fails, so splice() falls back to treating the
notification pipe like a normal pipe - so we end up in
iter_file_splice_write(), which first locks the input pipe, then calls
vfs_iter_write(), which locks the output pipe.
Lockdep complains about that, because we're taking a pipe lock while
already holding another pipe lock.
I think this probably (?) can't actually lead to deadlocks, since you'd
need another way to nest locking a normal pipe into locking a
watch_queue pipe, but the lockdep annotations don't make that clear.
Bail out earlier in pipe_write() for notification pipes, before taking
the pipe lock.
Reported-and-tested-by: <syzbot+011e4ea1da6692cf881c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=011e4ea1da6692cf881c
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231124150822.2121798-1-jannh@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b1e380026 ]
crtsavres.o is linked to modules. However, as explained in commit
d0e628cd81 ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa25b571a ("powerpc/64: Do not link crtsavres.o in vmlinux")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 475c58e1a4 ]
Enabling -Wstringop-overflow globally exposes a warning for a common bug
in the usage of strncat():
drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr':
drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=]
1136 | strncat(msg, other, OCX_MESSAGE_SIZE);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
1145 | strncat(msg, other, OCX_MESSAGE_SIZE);
...
1150 | strncat(msg, other, OCX_MESSAGE_SIZE);
...
Apparently the author of this driver expected strncat() to behave the
way that strlcat() does, which uses the size of the destination buffer
as its third argument rather than the length of the source buffer. The
result is that there is no check on the size of the allocated buffer.
Change it to strlcat().
[ bp: Trim compiler output, fixup commit message. ]
Fixes: 41003396f9 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6175b40775 ]
AMD systems generally allow MCA "simulation" where MCA registers can be
written with valid data and the full MCA handling flow can be tested by
software.
However, the platform on Scalable MCA systems, can prevent software from
writing data to the MCA registers. There is no architectural way to
determine this configuration. Therefore, the MCE injection module will
check for this behavior by writing and reading back a test status value.
This is done during module init, and the check can run on any CPU with
any valid MCA bank.
If MCA_STATUS writes are ignored by the platform, then there are no side
effects on the hardware state.
If the writes are not ignored, then the test status value will remain in
the hardware MCA_STATUS register. It is likely that the value will not
be overwritten by hardware or software, since the tested CPU and bank
are arbitrary. Therefore, the user may see a spurious, synthetic MCA
error reported whenever MCA is polled for this CPU.
Clear the test value immediately after writing it. It is very unlikely
that a valid MCA error is logged by hardware during the test. Errors
that cause an #MC won't be affected.
Fixes: 891e465a1b ("x86/mce: Check whether writes to MCA_STATUS are getting ignored")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231118193248.1296798-2-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a24d61c609 ]
tl;dr: The num_digits() function has a theoretical overflow issue.
But it doesn't affect any actual in-tree users. Fix it by using
a larger type for one of the local variables.
Long version:
There is an overflow in variable m in function num_digits when val
is >= 1410065408 which leads to the digit calculation loop to
iterate more times than required. This results in either more
digits being counted or in some cases (for example where val is
1932683193) the value of m eventually overflows to zero and the
while loop spins forever).
Currently the function num_digits is currently only being used for
small values of val in the SMP boot stage for digit counting on the
number of cpus and NUMA nodes, so the overflow is never encountered.
However it is useful to fix the overflow issue in case the function
is used for other purposes in the future. (The issue was discovered
while investigating the digit counting performance in various
kernel helper functions rather than any real-world use-case).
The simplest fix is to make m a long long, the overhead in
multiplication speed for a long long is very minor for small values
of val less than 10000 on modern processors. The alternative
fix is to replace the multiplication with a constant division
by 10 loop (this compiles down to an multiplication and shift)
without needing to make m a long long, but this is slightly slower
than the fix in this commit when measured on a range of x86
processors).
[ dhansen: subject and changelog tweaks ]
Fixes: 646e29a178 ("x86: Improve the printout of the SMP bootup CPU table")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1168413414 upstream.
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/20240110140127.241451-1-sumanthk@linux.ibm.com
Fixes: 2d1f649c7c ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c48a7c44a1 upstream.
The kernel-feat directive passes its argument straight to the shell.
This is unfortunate and unnecessary.
Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).
This also makes the code shorter.
This is analogous to commit 3231dd5862 ("docs: kernel_abi.py: fix
command injection") where we did exactly the same thing for
kernel_abi.py, somehow I completely missed this one.
Link: https://fosstodon.org/@jani/111676532203641247
Reported-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240110174758.3680506-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efbd639835 upstream.
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/
Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc0271a339 upstream.
CCITMIN is a 12 bit field and doesn't fit in a u8, so extend it to u16.
This probably wasn't an issue previously because values higher than 255
never occurred.
But since commit 4aff040bcc ("coresight: etm: Override TRCIDR3.CCITMIN
on errata affected cpus"), a comparison with 256 was done to enable the
errata, generating the following W=1 build error:
coresight-etm4x-core.c:1188:24: error: result of comparison of
constant 256 with expression of type 'u8' (aka 'unsigned char') is
always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (drvdata->ccitmin == 256)
Cc: stable@vger.kernel.org
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310302043.as36UFED-lkp@intel.com/
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231101115206.70810-1-james.clark@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25054b2326 upstream.
The ttyname buffer for the ledtrig_tty_data struct is allocated in the
sysfs ttyname_store() function. This buffer must be released on trigger
deactivation. This was missing and is thus a memory leak.
While we are at it, the TTY handler in the ledtrig_tty_data struct should
also be returned in case of the trigger deactivation call.
Cc: stable@vger.kernel.org
Fixes: fd4a641ac8 ("leds: trigger: implement a tty trigger")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231127081621.774866-1-fe@dev.tdt.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa1fc5a80 upstream.
Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.
Cc: <stable@vger.kernel.org>
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB7903A4094564BE28F1F926A6C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c9ae0b860 upstream.
core-1 core-2
-------------------------------------------------------
uio_unregister_device uio_open
idev = idr_find()
device_unregister(&idev->dev)
put_device(&idev->dev)
uio_device_release
get_device(&idev->dev)
kfree(idev)
uio_free_minor(minor)
uio_release
put_device(&idev->dev)
kfree(idev)
-------------------------------------------------------
In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
freed.
To address this issue, we can get idev atomic & inc idev reference with
minor_lock.
Fixes: 57c5f4df0a ("uio: fix crash after the device is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1090371e0 upstream.
Update the comments of binder_alloc_new_buf() to reflect that the return
value of the function is now ERR_PTR(-errno) on failure.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 57ada2fb22 ("binder: add log information for binder transaction failures")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 122a3c1cb0 upstream.
Fix minor misspelling of the function in the comment section.
No functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: 0f966cba95 ("binder: add flag to clear buffer on txn complete")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f489c2067 upstream.
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f260 ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70
Hardware name: linux,dummy-virt (DT)
Call trace:
zap_page_range_single+0x470/0x4b8
binder_alloc_free_page+0x608/0xadc
__list_lru_walk_one+0x130/0x3b0
list_lru_walk_node+0xc4/0x22c
binder_shrink_scan+0x108/0x1dc
shrinker_debugfs_scan_write+0x2b4/0x500
full_proxy_write+0xd4/0x140
vfs_write+0x1ac/0x758
ksys_write+0xf0/0x1dc
__arm64_sys_write+0x6c/0x9c
Allocated by task 492:
kmem_cache_alloc+0x130/0x368
vm_area_alloc+0x2c/0x190
mmap_region+0x258/0x18bc
do_mmap+0x694/0xa60
vm_mmap_pgoff+0x170/0x29c
ksys_mmap_pgoff+0x290/0x3a0
__arm64_sys_mmap+0xcc/0x144
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Cc: stable@vger.kernel.org
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ac061db9c upstream.
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f ("binder: check for binder_thread allocation failure in binder_poll()")
Cc: stable@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bed9e27baf upstream.
This reverts commit 5e2cf333b7.
That commit introduced the following race and can cause system hung.
md_write_start: raid5d:
// mddev->in_sync == 1
set "MD_SB_CHANGE_PENDING"
// running before md_write_start wakeup it
waiting "MD_SB_CHANGE_PENDING" cleared
>>>>>>>>> hung
wakeup mddev->thread
...
waiting "MD_SB_CHANGE_PENDING" cleared
>>>> hung, raid5d should clear this flag
but get hung by same flag.
The issue reverted commit fixing is fixed by last patch in a new way.
Fixes: 5e2cf333b7 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf9bedfc3 upstream.
The ppace array is not freed if one of the init_acl_state() calls inside
parse_dacl() fails. At the moment the function may fail only due to the
memory allocation errors so it's highly unlikely in this case but
nevertheless a fix is needed.
Move ppace allocation after the init_acl_state() calls with proper error
handling.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d592a9158a upstream.
When file is changed using notepad on read-only share(read_only = yes in
ksmbd.conf), There is a problem where existing data is truncated.
notepad in windows try to O_TRUNC open(FILE_OVERWRITE_IF) and all data
in file is truncated. This patch don't allow O_TRUNC open on read-only
share and add KSMBD_TREE_CONN_FLAG_WRITABLE check in smb2_set_info().
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b17ef04bf3 upstream.
[Why]
OTG inst and pwrseq inst mapping is not align therefore we cannot use
otg_inst as pwrseq inst to get DCIO register.
[How]
1. Pass the correct pwrseq instance to dmub when set abm pipe.
2. LVTMA control index change from panel_inst to pwrseq_inst.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Phil Hsieh <phil.hsieh@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aaafe88d55 upstream.
The moxtet module fails to auto-load on. Add a SPI id table to
allow it to do so.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7830f5a83 upstream.
The Turris Mox shares the moxtet IRQ with various devices on the board,
so mark the IRQ as shared in the driver as well.
Without this loading the module will fail with:
genirq: Flags mismatch irq 40. 00002002 (moxtet) vs. 00002080 (mcp7940x)
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df0cced741 upstream.
The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work,
is also sold as the Eluktronics RP-15 which does not use the standard
TongFang GMxXGxx DMI board_name.
Add an entry for this laptop to the irq1_edge_low_force_override[] DMI
table to make the internal keyboard functional.
Reported-by: Luis Acuna <ldacuna@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d65d70161 upstream.
This adds overrides for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20240102214821.3394810-1-lorenz@brun.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba7053b4b4 upstream.
Add driver properties on 4 models of this laptop serie since they don't
have _DSD in the ACPI table
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d110858a69 upstream.
Some laptops without _DSD have the SPI speed set very low in the BIOS.
Since the SPI controller uses this speed as its max speed, the SPI
transactions are very slow. Firmware download writes to many registers,
and if the SPI speed is too slow, it can take a long time to download.
For this reason, disable firmware loading if the maximum SPI speed is
too low. Without Firmware, audio playback will work, but the volume
will be low to ensure safe operation of the CS35L41.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 423206604b upstream.
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e26b6d3927 upstream.
When setting an xattr, explicitly null-terminate the xattr list. This
eliminates the fragile assumption that the unused xattr space is always
zeroed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
with preemption disabled. This removes some false positive splats a
number of users were seeing if their driver didn't have support for
atomic transfers. Also, fix a typo in the docs while we are here.
-----BEGIN PGP SIGNATURE-----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=LZdW
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Improve the detection when to run atomic transfer handlers for kernels
with preemption disabled. This removes some false positive splats a
number of users were seeing if their driver didn't have support for
atomic transfers.
Also, fix a typo in the docs while we are here"
* tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Fix atomic xfer check for non-preempt config
Documentation/i2c: fix spelling error in i2c-address-translators
Since commit aa49c90894 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.
During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:
[ 12.687169] No atomic I2C transfer handler for 'i2c-0'
[ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...
Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.
Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c90894 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
issues or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZhbAwAKCRDdBJ7gKXxA
jiFeAQD20H8wGT9hbMUYr/PxE4rOxyDXlhnv/mZ0Av3neve4SQD/YlgCFWYpEu8G
F5rEAtq89UYE13qlgS3o9KjYOPzhtgQ=
=vZ0P
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
- Fix another regression in the NFSD administrative API
-----BEGIN PGP SIGNATURE-----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=TKjN
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix another regression in the NFSD administrative API
* tag 'nfsd-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: drop the nfsd_put helper
This pull request includes a single patch to suppress unexpected system
reboot in AMD Ryzen machines with PCIe card consisting of Asmedia
ASM1083/1085 and VT6306/6307/6308. When 1394 OHCI driver for the card
accesses to a specific register in PCI memory space, the system reboot
often occurs. The issue affects all versions of Linux kernel as long as
the 1394 OHCI driver is included. The mechanism of unexpected system
reboot is not clear, so the driver is changed to avoid the access itself
when detecting the combination of hardware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZZf7jQAKCRCsLtaWM8Lw
E7D2AP9JXU29+5HRNDYBonC1tEItRK8auF+wbAOe7HcOjRXoUgEA2ghLbA6I2bot
iQ/VjH/45TPyo7YAfLw1Kx+vpaysIwU=
=EGMc
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to suppress unexpected system reboot in AMD Ryzen
machines with PCIe card consisting of Asmedia ASM1083/1085 and
VT6306/6307/6308.
When the 1394 OHCI driver for the card accesses a specific register
in PCI memory space, the system reboot often occurs.
The issue affects all versions of Linux kernel as long as the 1394
OHCI driver is included. The mechanism of unexpected system reboot is
not clear, so the driver is changed to avoid the access itself when
detecting the combination of hardware"
* tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
amdgpu:
- DP MST fix
- SMU 13.0.6 fixes
- Fix displays on macbooks using vega12
- Fix VSC and colorimetry on DP/eDP
nouveau:
- fix deadlock between fence signalling and irq paths
- fix GSP memory leaks
- fix GSP leftover debug
- hide some GSP callback messages
- fix GSP display disable path
- fix GSP ACPI interaction
- handle errors in ctrl messages
- use errors info to fix DP link training
-----BEGIN PGP SIGNATURE-----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=94nf
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"The amdgpu ones are fairly normal, the one that is a bit large is a
fix for a newly introduced IP in 6.7 so unlikely to cause regressions.
The nouveau ones are mostly memory leaks and debugging cleanups from
the GSP (new nvidia firmware) enablement. There are some GSP changes
to the message passing code and a subsequent fix for eDP panel turn
on, that means my laptop can turn on the panel in GSP mode. These are
fairly low chance of disrupting things since GSP is new in 6.7. The
final not all in GSP fix is a deadlock seen with i915/nouveau when GSP
is used where the the fence and irq paths have locking inversions,
I've pushed some irq enablement out to a workqueue, and this has seen
some fairly decent testing.
amdgpu:
- DP MST fix
- SMU 13.0.6 fixes
- fix displays on macbooks using vega12
- fix VSC and colorimetry on DP/eDP
nouveau:
- fix deadlock between fence signalling and irq paths
- fix GSP memory leaks
- fix GSP leftover debug
- hide some GSP callback messages
- fix GSP display disable path
- fix GSP ACPI interaction
- handle errors in ctrl messages
- use errors info to fix DP link training"
* tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/dp: Honor GSP link training retry timeouts
nouveau: push event block/allowing out of the fence context
nouveau/gsp: always free the alloc messages on r535
nouveau/gsp: don't free ctrl messages on errors
nouveau/gsp: convert gsp errors to generic errors
drm/nouveau/gsp: Fix ACPI MXDM/MXDS method invocations
nouveau/gsp: free userd allocation.
nouveau/gsp: free acpi object after use
nouveau: fix disp disabling with GSP
nouveau/gsp: drop some acpi related debug
nouveau/gsp: add three notifier callbacks that we see in normal operation (v2)
drm/amd/pm: Use gpu_metrics_v1_5 for SMUv13.0.6
drm/amd/pm: Add gpu_metrics_v1_5
drm/amd/pm: Add mem_busy_percent for GCv9.4.3 apu
drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR
drm/amdgpu: skip gpu_info fw loading on navi12
drm/amd/display: add nv12 bounding box
drm/amd/pm: Update metric table for jpeg/vcn data
drm/amd/pm: Use separate metric table for APU
drm/amd/display: pbn_div need be updated for hotplug event
syzbot is reporting uninit-value at shrinker_alloc(), for commit
307bececcd ("mm: shrinker: add a secondary array for
shrinker_info::{map, nr_deferred}") which assumed that the ->unit was
allocated with __GFP_ZERO forgot to replace kvmalloc_node() in
expand_one_shrinker_info() with kvzalloc_node().
Link: https://lkml.kernel.org/r/9226cc0a-10e0-4489-80c5-58c3b5b4359c@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+1e0ed05798af62917464@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=1e0ed05798af62917464
Fixes: 307bececcd ("mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These are two correctness fixes for handing DT input in the Allwinner
(sunxi) SMP startup code.
-----BEGIN PGP SIGNATURE-----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=//KH
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-3a' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are two correctness fixes for handing DT input in the
Allwinner (sunxi) SMP startup code"
* tag 'soc-fixes-6.7-3a' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: sun9i: smp: fix return code check of of_property_match_string
ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init
- Kprobes/x86: Fix to emulate indirect call which size is not 5 byte.
Current code expects the indirect call instructions are 5 bytes, but
that is incorrect. Usually indirect call based on register is shorter
than that, thus the emulation causes a kernel crash by accessing
wrong instruction boundary. This uses the instruction size to
calculate the return address correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmWWxCIbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8brzYH+wZnk8UnJk8VmCp+BFwf
kHfzDruVLnsjiehMPIniu/DUoDpwZnUw3/uFWzMEnH0y14GfTgS5D0m1ctybtpnR
PgUeWSRI0XAxOXhExJLGd+/29V2E1FAjpR2kQx/U5hObzUtDNR2n0zLGO4qcJq0a
laNXnkc5OgkZ9KAcJp2dT4WNsUFalRUbr4PmeVUSxYxmI1L1/+Q74vyGywRBgqkB
lENLCbzubhp9T4pLBmCrDoRRPshjr/TYPRYvEJ5gEH9c+KuVOdZXa6Drr1Y5sADe
zsycxjPi2ETxJtMCf67IzBjNbYn/wGLg2u00FtRdt+JK6p0I+Wgm+cKb6ifPDLPN
PXU=
=CmiU
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes/x86 fix from Masami Hiramatsu:
- Fix to emulate indirect call which size is not 5 byte.
Current code expects the indirect call instructions are 5 bytes, but
that is incorrect. Usually indirect call based on register is shorter
than that, thus the emulation causes a kernel crash by accessing
wrong instruction boundary. This uses the instruction size to
calculate the return address correctly.
* tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect
-----BEGIN PGP SIGNATURE-----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=0P5G
-----END PGP SIGNATURE-----
Merge tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three important multichannel smb3 client fixes found in recent
testing:
- fix oops due to incorrect refcounting of interfaces after
disabling multichannel
- fix possible unrecoverable session state after disabling
multichannel with active sessions
- fix two places that were missing use of chan_lock"
* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not depend on release_iface for maintaining iface_list
cifs: cifs_chan_is_iface_active should be called with chan_lock held
cifs: after disabling multichannel, mark tcon for reconnect
VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).
The issue explicitly appears at a commit dcadfd7f7c ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.
This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.
Cc: stable@vger.kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994
Reported-by: Tobias Gruetzmacher <tobias-lists@23.gs>
Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973
Closes: https://bugs.launchpad.net/linux/+bug/2043905
Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
