Commit graph

3,807 commits

Author SHA1 Message Date
Dhananjay Ugwekar
5d9a354cf8 cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
According to the AMD architectural programmer's manual volume 2 [1], in
section "17.6.4.1 CPPC_CAPABILITY_1" lowest_nonlinear_perf is described
as "Reports the most energy efficient performance level (in terms of
performance per watt). Above this threshold, lower performance levels
generally result in increased energy efficiency. Reducing performance
below this threshold does not result in total energy savings for a given
computation, although it reduces instantaneous power consumption". So
lowest_nonlinear_perf is the most power efficient performance level, and
going below that would lead to a worse performance/watt.

Also, setting the minimum frequency to lowest_nonlinear_freq (instead of
lowest_freq) allows the CPU to idle at a higher frequency which leads
to more time being spent in a deeper idle state (as trivial idle tasks
are completed sooner). This has shown a power benefit in some systems,
in other systems, power consumption has increased but so has the
throughput/watt.

Modify the initial policy_data->min set by cpufreq-core to
lowest_nonlinear_freq, in the ->verify() callback. Also set the
cpudata->req[0] to FREQ_QOS_MIN_DEFAULT_VALUE (i.e. 0), so that it also
gets overriden by the check in verify function.

Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf [1]

Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241017053927.25285-3-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Dhananjay Ugwekar
205cb215d0 cpufreq/amd-pstate: Remove the redundant verify() function
Merge the two verify() callback functions and rename the
cpufreq_policy_data argument for better readability.

Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241017053927.25285-2-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Mario Limonciello
508239724b cpufreq/amd-pstate: Drop needless EPP initialization
The EPP value doesn't need to be cached to the CPPC request in
amd_pstate_epp_update_limit() because it's passed as an argument
at the end to amd_pstate_set_epp() and stored at that time.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Mario Limonciello
047a2d0c83 cpufreq/amd-pstate: Use amd_pstate_update_min_max_limit() for EPP limits
When the EPP updates are set the maximum capable frequency for the
CPU is used to set the upper limit instead of that of the policy.

Adjust amd_pstate_epp_update_limit() to reuse policy calculation code
from amd_pstate_update_min_max_limit().

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Mario Limonciello
67c08d303e cpufreq/amd-pstate: Don't update CPPC request in amd_pstate_cpu_boost_update()
When boost is changed the CPPC value is changed in amd_pstate_cpu_boost_update()
but then changed again when refresh_frequency_limits() and all it's callbacks
occur.  The first is a pointless write, so instead just update the limits for
the policy and let the policy refresh anchor everything properly.

Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Mario Limonciello
7820e8050d cpufreq/amd-pstate: Fix non kerneldoc comment
The comment for amd_cppc_supported() isn't meant to be kernel doc.

Fixes: cb817ec667 ("cpufreq: amd-pstate: show CPPC debug message if CPPC is not supported")
Link: https://lore.kernel.org/r/20240905162351.1345560-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Dhananjay Ugwekar
1bfe6a54d2 cpufreq/amd-pstate: Rename MSR and shared memory specific functions
Existing function names "cppc_*" and "pstate_*" for shared memory and
MSR based systems are not intuitive enough, replace them with "shmem_*" and
"msr_*" respectively.

Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240917091434.10685-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-28 14:54:35 -05:00
Uwe Kleine-König
a9dedaa07b cpufreq: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/cpufreq to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241020153910.324096-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-28 12:24:39 +01:00
Marcin Juszkiewicz
8d5459f1a7 cpufreq: use proper units for frequency
When I booted my RK3588 based system I noticed that cpufreq complained
about system clock:

[  +0.007211] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 816000 KHz, changing to: 1008000 KHz

Then I realized that unit is displayed wrong: "KHz" instead of "kHz".

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240909095529.2325103-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-28 12:24:29 +01:00
Mario Limonciello
104edc6efc x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
This feature is an AMD unique feature of some processors, so put
AMD into the name.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-2-mario.limonciello@amd.com
2024-10-25 20:09:16 +02:00
Yuan Can
5f856d71cc cpufreq: loongson2: Unregister platform_driver on failure
When cpufreq_register_driver() returns error, the cpufreq_init() returns
without unregister platform_driver, fix by add missing
platform_driver_unregister() when cpufreq_register_driver() failed.

Fixes: f8ede0f700 ("MIPS: Loongson 2F: Add CPU frequency scaling support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-10-16 15:20:21 +05:30
Mario Limonciello
18d9b52271 cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
When boost has been disabled the limit for perf should be nominal perf not
the highest perf.  Using the latter to do calculations will lead to
incorrect values that are still above nominal.

Fixes: ad4caad58d ("cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()")
Reported-by: Peter Jung <ptr1337@cachyos.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219348
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-15 23:54:15 -05:00
Ulf Hansson
9da666ee5e cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
Rather than hooking up the PM domains through _opp_attach_genpd() and
manually manage runtime PM for the corresponding virtual devices created by
genpd during attach, let's avoid the boilerplate-code by converting into
dev_pm_domain_attach|detach_list.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-11-ulf.hansson@linaro.org
2024-10-10 14:19:12 +02:00
Dhruva Gole
41baf662a0 cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
With the Silicon revision being taken directly from socinfo, there's no
longer any need for reading any SOC register for revision from this driver.
Hence, we do not require any rev_offset for AM62 family of devices.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-10-10 12:54:42 +05:30
Dhruva Gole
1724ae88ef cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
The AM625 syscon for efuse was being taken earlier from the wkup_conf node
where the entire wkup_conf was marked as "syscon". This is wrong and will
be fixed in the devicetree. However, whenever that does happen will end up
breaking this driver for that device because of the change in efuse offset.

Hence, to avoid breaking any sort of backward compatibility of devicetrees
use a quirk to distinguish and accordingly use 0x0 offset for the new
syscon node.

Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-10-10 12:54:37 +05:30
Dhananjay Ugwekar
c10e50a469 cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
While switching the driver mode between active and passive, Collaborative
Processor Performance Control (CPPC) is disabled in
amd_pstate_unregister_driver(). But, it is not enabled back while registering
the new driver (passive or active). This leads to the new driver mode not
working correctly, so enable it back in amd_pstate_register_driver().

Fixes: 3ca7bc818d ("cpufreq: amd-pstate: Add guided mode control support via sysfs")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241004122303.94283-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-10-07 11:32:05 -05:00
Linus Torvalds
5d18081de2 Power management fixes for 6.12-rc2
- Fix CPU device node reference counting in the cpufreq core (Miquel
    Sabaté Solà).
 
  - Turn the spinlock used by the intel_pstate driver in hard IRQ
    context into a raw one to prevent the driver from crashing when
    PREEMPT_RT is enabled (Uwe Kleine-König).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmcAJMUSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx4o0P/2eVuEGFIOurheROyFs7UrYRwODvWpgd
 omE2iyihyi+E85IhOD3pPhwv8G156MhfGQ17Bwmt15jczzAs+j9ijPoX9tNxYMlh
 oUq9lsF3B+1sF2VD31iRK6oUjwSQIrjoCzlEuKfW/2VQKmHFFNbj1oj6gYhtWJnb
 0NfozwDMVeN+hqRAZ1TNXnQcohgpQJjkaalHJccTgSNlTJ6J3nCvamdrBRMbBJLU
 DbqYWkLHw26AzARxV3isTj8dFb9R/ng6g/uCBuHGID9JbYCpQS72n2H/9yff7Msf
 wHnRpaDYaAniJPFXlZDyct/LYR9JI477nYIO8jJenfNLr1640hFGBF8DyM7EREcU
 ACnnbQTY5omGyhNoTRrEnSdwa54ukzABlNcldCLn1ilIvWqFrR3YFwX/tNsyBYFL
 Y2HGwfEHpFoKYdUXs3wLN0prnaV0ILr71Kv9OR+d2lB/KmPCSMvYvJSpYVMrl93R
 hsOkZUprd0DXZCRDr4mSFbUZcNzOwMi7c1QgueRcdJuoG8rXzi0nq3RrtV2rgoTz
 beOnxUieEzWrl4OVTtbiBu2H2o2N0VM7znaNxr1hWjwzHeXpxs0ChmQRwmY450fW
 bvOpqhEkrrBTGuQ0xgn41KpIV0G/X0ULrjsC9W9bmf4Oi6aUxQvtRTTvYDjH9pil
 Gy3P1hPfPUkb
 =mgVf
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix two cpufreq issues, one in the core and one in the
  intel_pstate driver:

   - Fix CPU device node reference counting in the cpufreq core (Miquel
     Sabaté Solà)

   - Turn the spinlock used by the intel_pstate driver in hard IRQ
     context into a raw one to prevent the driver from crashing when
     PREEMPT_RT is enabled (Uwe Kleine-König)"

* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Avoid a bad reference count on CPU node
  cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
2024-10-04 11:57:15 -07:00
Jie Zhan
ea1829d4d4 cppc_cpufreq: Remove HiSilicon CPPC workaround
Since commit 6c8d750f97 ("cpufreq / cppc: Work around for Hisilicon CPPC
cpufreq"), we introduce a workround for HiSilicon platforms that do not
support performance feedback counters, whereas they can get the actual
frequency from the desired perf register.  Later on, FIE is disabled in
that workaround as well.

Now the workround can be handled by the common code.  Desired perf would be
read and converted to frequency if feedback counters don't change.  FIE
would be disabled if the CPPC regs are in PCC region.

Hence, the workaround is no longer needed and can be safely removed, in an
effort to consolidate the driver procedure.

Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
[ Viresh: Move fie_disabled withing CONFIG option to fix warning ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-10-03 11:09:44 +05:30
Jie Zhan
c471956319 cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged
The CPPC performance feedback counters could be 0 or unchanged when the
target cpu is in a low-power idle state, e.g. power-gated or clock-gated.

When the counters are 0, cppc_cpufreq_get_rate() returns 0 KHz, which makes
cpufreq_online() get a false error and fail to generate a cpufreq policy.

When the counters are unchanged, the existing cppc_perf_from_fbctrs()
returns a cached desired perf, but some platforms may update the real
frequency back to the desired perf reg.

For the above cases in cppc_cpufreq_get_rate(), get the latest desired perf
from the CPPC reg to reflect the frequency because some platforms may
update the actual frequency back there; if failed, use the cached desired
perf.

Fixes: 6a4fec4f6d ("cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-10-03 11:07:53 +05:30
Al Viro
5f60d5f6bb move asm/unaligned.h to linux/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02 17:23:23 -04:00
Uwe Kleine-König
8b4865cd90 cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
notify_hwp_interrupt() is called via sysvec_thermal() ->
smp_thermal_vector() -> intel_thermal_interrupt() in hard irq context.
For this reason it must not use a simple spin_lock that sleeps with
PREEMPT_RT enabled. So convert it to a raw spinlock.

Reported-by: xiao sheng wen <atzlinux@sina.com>
Link: https://bugs.debian.org/1076483
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: xiao sheng wen <atzlinux@sina.com>
Link: https://patch.msgid.link/20240919081121.10784-2-ukleinek@debian.org
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-01 20:43:39 +02:00
Linus Torvalds
2004cef11e In the v6.12 scheduler development cycle we had 63 commits from 18 contributors:
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot de Oliveira's
    last major contribution to the kernel:
 
      "SCHED_DEADLINE servers can help fixing starvation issues of low priority
      tasks (e.g., SCHED_OTHER) when higher priority tasks monopolize CPU
      cycles. Today we have RT Throttling; DEADLINE servers should be able to
      replace and improve that."
 
      (Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes,
       Youssef Esmat, Huang Shijie)
 
  - Preparatory changes for sched_ext integration:
 
      - Use set_next_task(.first) where required
      - Fix up set_next_task() implementations
      - Clean up DL server vs. core sched
      - Split up put_prev_task_balance()
      - Rework pick_next_task()
      - Combine the last put_prev_task() and the first set_next_task()
      - Rework dl_server
      - Add put_prev_task(.next)
 
       (Peter Zijlstra, with a fix by Tejun Heo)
 
  - Complete the EEVDF transition and refine EEVDF scheduling:
 
      - Implement delayed dequeue
      - Allow shorter slices to wakeup-preempt
      - Use sched_attr::sched_runtime to set request/slice suggestion
      - Document the new feature flags
      - Remove unused and duplicate-functionality fields
      - Simplify & unify pick_next_task_fair()
      - Misc debuggability enhancements
 
       (Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann,
        Valentin Schneider and Chuyi Zhou)
 
  - Initialize the vruntime of a new task when it is first enqueued,
    resulting in significant decrease in latency of newly woken tasks.
    (Zhang Qiao)
 
  - Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
    (K Prateek Nayak, Peter Zijlstra)
 
  - Clean up and clarify the usage of Clean up usage of rt_task()
    (Qais Yousef)
 
  - Preempt SCHED_IDLE entities in strict cgroup hierarchies
    (Tianchen Ding)
 
  - Clarify the documentation of time units for deadline scheduler
    parameters. (Christian Loehle)
 
  - Remove the HZ_BW chicken-bit feature flag introduced a year ago,
    the original change seems to be working fine.
    (Phil Auld)
 
  - Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
    Peilin He, Qais Yousefm and Vincent Guittot)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmbr8qcRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gdbw/+Mj3zWfYP+dtUkfgrR2FClPAJoo1/9Dz0
 LYD8XgYHu8rEJ0Aq+VbdkgYGUt9utvzUFPIxvWFDcldQl57KwhF4hp9Ir+PqJyYC
 NolQ1q8ddo1hnslxnEg6SgHVzQq/4FqMM0nDNUkQETCx6zTyFFeRf+q7o/2c2m5B
 uI9dSU1Wrx7XrXm2D3kB8+xP+ZRy+qhbFN5Pfuz96mhelfklylgKMfPzgAiCT/7T
 JTbQhQ2HdcCNgiLoSrWsHBDy2UYpouP4zb4jyd+lDQzhSUJrj3u4Xy4vVmuTKq+y
 sTgWlgKB+MTuh9UuJ4UYzSnMqg161UlMvtXeH84ABmAqDNGHRPtOKrrlcLtJ3D4x
 m1SPhNnsvpjOu2pH0XLIS8al3VUesWND5S+rucHRYSq6Nvhivf4MTvRJlicXXurL
 Mt2APnIlhGJuKBNWnmyZovVdtO0ZUUPlaZWfr3rCS4txAVo+HwWhsm3uhtTycQqN
 gazsCiuGh6Jds90ZqA/BvdLWG+DY8J0xLlV3ex4pCXuQ/HFrabVWTyThJsULhrZ2
 5mTdWIsocPctNMO9/RHMy7vJI7G7ljgHEquWVn5kiGGzXhK6VwVwKAMpfgXGw+YA
 yVP6/M7a7g2yEzj69gXkcDa8k/kedMVquJ/G/8YhZM7u7sPqsMjpmaGsqsJRfnpT
 ChngAzap+kA=
 =TEC6
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot
   de Oliveira's last major contribution to the kernel:

     "SCHED_DEADLINE servers can help fixing starvation issues of low
      priority tasks (e.g., SCHED_OTHER) when higher priority tasks
      monopolize CPU cycles. Today we have RT Throttling; DEADLINE
      servers should be able to replace and improve that."

   (Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes, Youssef
   Esmat, Huang Shijie)

 - Preparatory changes for sched_ext integration:
     - Use set_next_task(.first) where required
     - Fix up set_next_task() implementations
     - Clean up DL server vs. core sched
     - Split up put_prev_task_balance()
     - Rework pick_next_task()
     - Combine the last put_prev_task() and the first set_next_task()
     - Rework dl_server
     - Add put_prev_task(.next)

   (Peter Zijlstra, with a fix by Tejun Heo)

 - Complete the EEVDF transition and refine EEVDF scheduling:
     - Implement delayed dequeue
     - Allow shorter slices to wakeup-preempt
     - Use sched_attr::sched_runtime to set request/slice suggestion
     - Document the new feature flags
     - Remove unused and duplicate-functionality fields
     - Simplify & unify pick_next_task_fair()
     - Misc debuggability enhancements

   (Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann, Valentin
   Schneider and Chuyi Zhou)

 - Initialize the vruntime of a new task when it is first enqueued,
   resulting in significant decrease in latency of newly woken tasks
   (Zhang Qiao)

 - Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
   (K Prateek Nayak, Peter Zijlstra)

 - Clean up and clarify the usage of Clean up usage of rt_task()
   (Qais Yousef)

 - Preempt SCHED_IDLE entities in strict cgroup hierarchies
   (Tianchen Ding)

 - Clarify the documentation of time units for deadline scheduler
   parameters (Christian Loehle)

 - Remove the HZ_BW chicken-bit feature flag introduced a year ago,
   the original change seems to be working fine (Phil Auld)

 - Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
   Peilin He, Qais Yousefm and Vincent Guittot)

* tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched/cpufreq: Use NSEC_PER_MSEC for deadline task
  cpufreq/cppc: Use NSEC_PER_MSEC for deadline task
  sched/deadline: Clarify nanoseconds in uapi
  sched/deadline: Convert schedtool example to chrt
  sched/debug: Fix the runnable tasks output
  sched: Fix sched_delayed vs sched_core
  kernel/sched: Fix util_est accounting for DELAY_DEQUEUE
  kthread: Fix task state in kthread worker if being frozen
  sched/pelt: Use rq_clock_task() for hw_pressure
  sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c
  sched/core: Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
  sched: Add put_prev_task(.next)
  sched: Rework dl_server
  sched: Combine the last put_prev_task() and the first set_next_task()
  sched: Rework pick_next_task()
  sched: Split up put_prev_task_balance()
  sched: Clean up DL server vs core sched
  sched: Fixup set_next_task() implementations
  sched: Use set_next_task(.first) where required
  sched/fair: Properly deactivate sched_delayed task upon class change
  ...
2024-09-19 15:55:58 +02:00
Rafael J. Wysocki
9bcf30348f second round of amd-pstate changes for 6.12 (second try):
* Move the calculation of the AMD boost numerator outside of
   amd-pstate, correcting acpi-cpufreq on systems with preferred cores
 * Harden preferred core detection to avoid potential false positives
 * Add extra unit test coverage for mode state machine
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmbhviEaHG1hcmlvLmxp
 bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnYqDA//TrvmXcpk1mnVJw3Y7MG0
 /n8dsLpxqVtEf+USnlGR+iRhgSQ/W/Kr7b5a+jmdCwpHChuWHt2FnNgcHLIxDnZC
 vmEJ02/2BCRoPKvcvV4VTh0ATu3O9nqwQiBVWBdNjDy+Dzr0pzA+SQopt1hCIsO2
 mzUodhpiBqYKlMf/i6+aM1gZCGGqoRC40aGqnJsgegb61vl7zIc2ZcbTxUQlyTfv
 t6J73IXLx8+YtrjejBYc7mRHhMQ2hCKy92C/8cNoGocj5faSKsAA3OUDcWq8qX0U
 zK3GGGdW8MLHSbt3VyntstnfiLL7TnzowcjvrMudIWpjC1987GlE9BApbN9VRZ8e
 ARN3Y7/ltjut/1fRB97BwjI9aDpzA0122Qzy4UOcK8o+be1eIr+ihV3Z9EN/snWg
 0L/oq5+rGHvvIzf1BwGhoPSvgBIu7eMIYDcRxKPlEiKsbXrL4DdJC/nXgaZ/HiGO
 eHx1dNy7LFrdnEwVI1frZWC6ZuZcpmOBdhnfU+leVxzB3Z++Qc266rsxKBsc5taZ
 PPV18pxfbbl3iL85KDIbuBUCmA0aY8WEdCKtfXpl7zlB5g0fZQLyYeUbvahK08Sk
 vyQAnPECbX/4v1Vx54Z70GPk0XD2+TXdg8yApnXrmRc36z/SLdprk5hPKbKhZu/r
 iPxFUnvd0HCtjsLrsq/qUiQ=
 =R4HZ
 -----END PGP SIGNATURE-----

Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:

"* Move the calculation of the AMD boost numerator outside of
   amd-pstate, correcting acpi-cpufreq on systems with preferred cores
 * Harden preferred core detection to avoid potential false positives
 * Add extra unit test coverage for mode state machine"

* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
  cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
  cpufreq/amd-pstate-ut: Add test case for mode switches
  cpufreq/amd-pstate: Export symbols for changing modes
  amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
  cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
  cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
  cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
  x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
  x86/amd: Move amd_get_highest_perf() out of amd-pstate
  ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
  ACPI: CPPC: Drop check for non zero perf ratio
  x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
  ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
  x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
2024-09-11 18:22:23 +02:00
Qianqiang Liu
93497752df cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
Using uninitialized value "mode2" when calling "amd_pstate_get_mode_string".
Set "mode2" to "AMD_PSTATE_DISABLE" by default.

Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://lore.kernel.org/r/20240910233923.46470-1-qianqiang.liu@163.com
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:53:03 -05:00
Mario Limonciello
3e39e68dfb cpufreq/amd-pstate-ut: Add test case for mode switches
There is a state machine in the amd-pstate driver utilized for
switches for all modes. To make sure that cleanup and setup works
properly for each mode add a unit test case that tries all
combinations.

Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:34:23 -05:00
Mario Limonciello
8d916815b0 cpufreq/amd-pstate: Export symbols for changing modes
In order to effectively test all mode switch combinations export
everything necessarily for amd-pstate-ut to trigger a mode switch.

Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:23 -05:00
Mario Limonciello
45722e777f cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
Don't take and release the mutex when prefcore isn't present and
avoid initialization of variables that will be initially set
in the function.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:23 -05:00
Mario Limonciello
ad4caad58d cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
The special case in amd_pstate_highest_perf_set() is the value used
for calculating the boost numerator.  Merge this into
amd_get_boost_ratio_numerator() and then use that to calculate boost
ratio.

This allows dropping more special casing of the highest perf value.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:23 -05:00
Mario Limonciello
279f838a61 x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
AMD systems that support preferred cores will use "166" as their
numerator for max frequency calculations instead of "255".

Add a function for detecting preferred cores by looking at the
highest perf value on all cores.

If preferred cores are enabled return 166 and if disabled the
value in the highest perf register. As the function will be called
multiple times, cache the values for the boost numerator and if
preferred cores will be enabled in global variables.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:23 -05:00
Mario Limonciello
2819bfef64 x86/amd: Move amd_get_highest_perf() out of amd-pstate
amd_pstate_get_highest_perf() is a helper used to get the highest perf
value on AMD systems.  It's used in amd-pstate as part of preferred
core handling, but applicable for acpi-cpufreq as well.

Move it out to cppc handling code as amd_get_highest_perf().

Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:23 -05:00
Mario Limonciello
6c09e3b445 x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.

Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11 10:23:22 -05:00
Christian Loehle
4eb71e3b45 cpufreq/cppc: Use NSEC_PER_MSEC for deadline task
Convert the cppc deadline task attributes to use the available
definitions to make them more readable.
No functional change.

Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240813144348.1180344-4-christian.loehle@arm.com
2024-09-11 11:25:10 +02:00
Rafael J. Wysocki
6af3aab6c7 ARM cpufreq updates for 6.12
- Several OF related cleanups in cpufreq drivers (Rob Herring).
 
 - Enable COMPILE_TEST for ARM drivers (Rob Herrring).
 
 - Introduce quirks for syscon failures and use socinfo to get revision
   for TI cpufreq driver (Dhruva Gole and Nishanth Menon).
 
 - Minor cleanups in amd-pstate driver (Anastasia Belova and Dhananjay
   Ugwekar).
 
 - Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
   (Danila Tikhonov, Huacai Chen, and Liu Jing).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmbalyoACgkQ0rkcPK6B
 Ehw9IBAAus+BOdYMzU8VT7j8Y98oOfb5FsJCoTU2KaV2RIIpX4k+6daruCOm0BXP
 RtRiI+ILV5zLUm8CIC15f2GQE6PtDBFmjky7ItEemcbQPlTkpkZFWNFhBqE1u3hw
 jllA4p1LmUwAnr1zkwl2CEUJSRJBxWPeTxPL0Ci6pycFhiNPZwGqOreJQRsIMOh3
 pgohKSBebxpzgwES8fhR32CqaHphrEFCryHafZIqzsXSBuyETGEKg57zTmdo6ojy
 GDuaIz6kQ9lKvW/q9iwTih93SsBnzDD85AAERDZkUDxey5IBLztrJLH5QT/XN77K
 EQOHeygwyKk4su00fXy/LXmMqKHCN/mAHgb6JvWBIm2xbDWx6drBJyV/NdX4YI4w
 4m1SqmFH9Cv41UIcynQR83XthGKgIddjEDKPW0GNMQ+LHWlUS6Qm4Kb2q4rXruqD
 bUWs3NmZEvYD9P2XOKGHgfSPZ0iNXi0Lt5BBIWbeIPNwaikxHisNsNG1W2pMsfke
 n19cvt20aBJgx2s5acIH7Po8qQglrGGK9EKWRg8gInvtB7QRbHBhXVD6ZNwuIk/7
 u2+Y42R4R1GzwsD3EUl+RnnUFgRwhg53OIzcE+AaaMDqGeTdxmG42eg0jGSBA7yx
 KbljH9PAfsMjjEjsVYReiIYxS28PZNyTBaxZJxD2RyxMz53CV9w=
 =BlNP
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge ARM cpufreq updates for 6.12 from Viresh Kumar:

"- Several OF related cleanups in cpufreq drivers (Rob Herring).

 - Enable COMPILE_TEST for ARM drivers (Rob Herrring).

 - Introduce quirks for syscon failures and use socinfo to get revision
   for TI cpufreq driver (Dhruva Gole and Nishanth Menon).

 - Minor cleanups in amd-pstate driver (Anastasia Belova and Dhananjay
   Ugwekar).

 - Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
   (Danila Tikhonov, Huacai Chen, and Liu Jing)."

* tag 'cpufreq-arm-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
  cpufreq: Fix the cacography in powernv-cpufreq.c
  cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
  cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
  cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
  cpufreq: Add SM7325 to cpufreq-dt-platdev blocklist
  cpufreq: Fix warning on unused of_device_id tables for !CONFIG_OF
  cpufreq/amd-pstate: Add the missing cpufreq_cpu_put()
  cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers
  cpufreq: Enable COMPILE_TEST on Arm drivers
  cpufreq: armada-8k: Avoid excessive stack usage
  cpufreq: omap: Drop asm includes
  cpufreq: qcom: Add explicit io.h include for readl/writel_relaxed
  cpufreq: spear: Use of_property_for_each_u32() instead of open coding
  cpufreq: Use of_property_present()
2024-09-06 20:50:46 +02:00
Rafael J. Wysocki
222caf5520 amd-pstate development for 6.12:
* Validate return of any attempt to update EPP limits, which fixes
   the masking hardware problems.
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmbYvoIaHG1hcmlvLmxp
 bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnY6ZxAAw0vB5p/mC8QfS5VuDm0O
 Up+dMtjVf9VcIOx4OoqSPNTY4HmNUnBSmACfeY/LzUa22BhM+7SJ74y8UoXGYGc8
 GKzuVDRsbqnuMrGqbOd8u+eJhcc8fln7zJVa1xBOM8V5yHqvnxjAsnwVieVhjmKa
 7m5K8ht/tJsCpaY/BjF7iHMgq950UGjO+pUXzrYP5ARV1O367DMWVQ91X9NBKwvN
 w/mapWmH+mpp0//2hL7wzrtGIfYjdndFP3xM0+7v5MoEd9KuSl7xCVObGidDOEaz
 oxfMCfPPpHMJLwD/L6VOwq/AIomJQVUZS8111ucnbdkIVW5QOlSaFwKJG/KmFvUQ
 98lfX2xAaGB26tvWQ3l+vFQ7Qces0NrJfCLbpS2NdQ2oSq1+1ab3Yeh1wDXYph7o
 hF+Xa/qJHzIFwzeQ2EmdXwthpoXbF5mmIiBZCTE/v1WpBVkYj+lJGtU+WsyAwFJT
 qPASAqrRo8KoCfhdxYT47Rc3AowUWtHoJQlZNzTdbmc7KXrk+7NfDUZ5ifLq3puI
 FAPWg76NM8aefoattsC57+6/V2bygbe1wIQaXRrybZiO9cMtY0eQ9bE4ysIm0ZQ8
 bSPEHg1iYl3OrMzwRYnBHmev8E4jmKdKSnBBPSqD3ObeR3fNZQs1pxWc3CtHP8LA
 p+AEE66CGAzsed5wudcEoOc=
 =nPcu
 -----END PGP SIGNATURE-----

Merge tag 'amd-pstate-v6.12-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge an amd-pstate driver update for 6.12 from Mario Limonciello:

"amd-pstate development for 6.12:
 * Validate return of any attempt to update EPP limits, which fixes
   the masking hardware problems."

* tag 'amd-pstate-v6.12-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
  cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
2024-09-05 13:04:46 +02:00
Rafael J. Wysocki
287f97a151 Merge back cpufreq material for 6.12 2024-09-05 13:04:20 +02:00
Mario Limonciello
c3e093efbc cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
amd_pstate_set_epp() calls cppc_set_epp_perf() which can fail for
a variety of reasons but this is ignored.  Change the return flow
to allow failures.

Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-04 15:07:34 -05:00
Dhruva Gole
6b612d1bac cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
In the AM62x, AM62Ax, and AM62Px devices, we already have the revision
info within the k3-socinfo driver. Hence, re-use this information from
there instead of re using the offset for 2 drivers trying to get the
same information ie. revision.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Liu Jing
87fa4bd351 cpufreq: Fix the cacography in powernv-cpufreq.c
The word 'swtich' is wrong, so fix it.

Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Nishanth Menon
abc00ffda4 cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
Commit b4bc9f9e27 ("cpufreq: ti-cpufreq: add support for omap34xx
and omap36xx") introduced special handling for OMAP3 class devices
where syscon node may not be present. However, this also creates a bug
where the syscon node is present, however the offset used to read
is beyond the syscon defined range.

Fix this by providing a quirk option that is populated when such
special handling is required. This allows proper failure for all other
platforms when the syscon node and efuse offsets are mismatched.

Fixes: b4bc9f9e27 ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Huacai Chen
2b7ec33e53 cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
Use raw_smp_processor_id() instead of plain smp_processor_id() in
do_service_request(), otherwise we may get some errors with the driver
enabled:

 BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208
 caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq]

Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Anastasia Belova
5493f9714e cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return in case of error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Danila Tikhonov
b14ceb82c3 cpufreq: Add SM7325 to cpufreq-dt-platdev blocklist
The Qualcomm SM7325 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Rob Herring (Arm)
24f9bfb847 cpufreq: Fix warning on unused of_device_id tables for !CONFIG_OF
!CONFIG_OF builds cause warnings on unused of_device_id tables. This is
due to of_match_node() being a macro rather than static inline function.
Add a __maybe_unused annotation to the of_device_id tables.

Fixes: c7582ec85342 ("cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408090714.wcrqU6Pk-lkp@intel.com/
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:59 +05:30
Dhananjay Ugwekar
49243adc71 cpufreq/amd-pstate: Add the missing cpufreq_cpu_put()
Fix the reference counting of cpufreq_policy object in amd_pstate_update()
function by adding the missing cpufreq_cpu_put().

Fixes: e8f555daac ("cpufreq/amd-pstate: fix setting policy current frequency value")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:58 +05:30
Rob Herring (Arm)
81746019b9 cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers
The CONFIG_ARM and CONFIG_ARM64 dependency is redundant as all the
drivers have necessary sub-arch dependency and don't depend on the
architecture support.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:58 +05:30
Rob Herring (Arm)
3f66425a4f cpufreq: Enable COMPILE_TEST on Arm drivers
COMPILE_TEST is useful for build testing without requiring a specific
architecture's compiler. Enable it for most of the Arm CPUFreq drivers.

As Kconfig.arm is only included on ARM and ARM64, COMPILE_TEST is only
enabled for those architectures until that is dropped.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-09-04 20:43:58 +05:30
Rafael J. Wysocki
929ebc93cc cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems
Make intel_pstate use the HWP_HIGHEST_PERF values from
MSR_HWP_CAPABILITIES to set asymmetric CPU capacity information
via the previously introduced arch_set_cpu_capacity() on hybrid
systems without SMT.

Setting asymmetric CPU capacity is generally necessary to allow the
scheduler to compute task sizes in a consistent way across all CPUs
in a system where they differ by capacity.  That, in turn, should help
to improve scheduling decisions.  It is also necessary for the schedutil
cpufreq governor to operate as expected on hybrid systems where tasks
migrate between CPUs of different capacities.

The underlying observation is that intel_pstate already uses
MSR_HWP_CAPABILITIES to get CPU performance information which is
exposed by it via sysfs and CPU performance scaling is based on it.
Thus using this information for setting asymmetric CPU capacity is
consistent with what the driver has been doing already.  Moreover,
HWP_HIGHEST_PERF reflects the maximum capacity of a given CPU including
both the instructions-per-cycle (IPC) factor and the maximum turbo
frequency and the units in which that value is expressed are the same
for all CPUs in the system, so the maximum capacity ratio between two
CPUs can be obtained by computing the ratio of their HWP_HIGHEST_PERF
values.  Of course, in principle that capacity ratio need not be
directly applicable at lower frequencies, so using it for providing the
asymmetric CPU capacity information to the scheduler is a rough
approximation, but it is as good as it gets.  Also, measurements
indicate that this approximation is not too bad in practice.

If the given system is hybrid and non-SMT, the new code disables ITMT
support in the scheduler (because it may get in the way of asymmetric CPU
capacity code in the scheduler that automatically gets enabled by setting
asymmetric CPU capacity) after initializing all online CPUs and finds
the one with the maximum HWP_HIGHEST_PERF value.  Next, it computes the
capacity number for each (online) CPU by dividing the product of its
HWP_HIGHEST_PERF and SCHED_CAPACITY_SCALE by the maximum HWP_HIGHEST_PERF.

When a CPU goes offline, its capacity is reset to SCHED_CAPACITY_SCALE
and if it is the one with the maximum HWP_HIGHEST_PERF value, the
capacity numbers for all of the other online CPUs are recomputed.  This
also takes care of a cleanup during driver operation mode changes.

Analogously, when a new CPU goes online, its capacity number is updated
and if its HWP_HIGHEST_PERF value is greater than the current maximum
one, the capacity numbers for all of the other online CPUs are
recomputed.

The case when the driver is notified of a CPU capacity change, either
through the HWP interrupt or through an ACPI notification, is handled
similarly to the CPU online case above, except that if the target CPU
is the current highest-capacity one and its capacity is reduced, the
capacity numbers for all of the other online CPUs need to be recomputed
either.

If the driver's "no_trubo" sysfs attribute is updated, all of the CPU
capacity information is computed from scratch to reflect the new turbo
status.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> # scale invariance
Link: https://patch.msgid.link/1979653.PYKUYFuaPT@rjwysocki.net
[ rjw: Fixed a typo in the changelog ]
[ rjw: Renamed 3 new functions and added a comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-04 13:45:35 +02:00
Rafael J. Wysocki
c4a6c82c9e Merge back cpufreq material for 6.12 2024-09-02 14:27:53 +02:00
Gautham R. Shenoy
9c68a3b03e cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
commit bff7d13c19 ("cpufreq: amd-pstate: add debug message while
CPPC is supported and disabled by SBIOS") issues a warning on plaforms
where the X86_FEATURE_CPPC is expected to be enabled, but is not due
to it being disabled in the BIOS.

This feature bit corresponds to CPUID 0x80000008.ebx[27] which is a
reserved bit on the Zen1 processors and a reserved bit on Zen2 based
models 0x70-0x7F, and is expected to be cleared on these
platforms. Thus printing the warning message for these models when
X86_FEATURE_CPPC is unavailable is incorrect. Fix this.

Modify some of the comments, and use switch-case for model range
checking for improved readability while at it.

Fixes: bff7d13c19 ("cpufreq: amd-pstate: add debug message while CPPC is supported and disabled by SBIOS")
Cc: Xiaojian Du <xiaojian.du@amd.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20240730140111.4491-1-00107082@163.com/
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-08-28 10:15:00 -05:00
Mario Limonciello
9983a9cd4d cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
If a system is using preferred cores the highest perf will be inconsistent
as it can change from system events.

Skip the checks for it.

Fixes: e571a5e206 ("cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-08-23 11:07:58 -05:00