To enhance the debugging capability of the driver loading failure for
broken CPPC ACPI tables, it can optimize the expression by moving the
verification of `min_freq`, `nominal_freq`, and other dependency values
to the `amd_pstate_init_freq()` function where they are initialized.
If any of these values are incorrect, the `amd-pstate` driver will not be registered.
By ensuring that these values are correct before they are used, it will facilitate
the debugging process when encountering driver loading failures due to faulty CPPC
ACPI tables from BIOS
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f9793f8451c1832e34cc9dc35f89c653b39cfe38.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.
Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Replace sprintf() and scnprintf() with sysfs_emit() and sysfs_emit_at()
in the cpufreq core.
This ensures safer buffer handling and consistency with sysfs interfaces.
Update show_scaling_available_governors() and related functions for
compliance with the new API.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240619081520.259971-1-perry.yuan@amd.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Support for the Allwinner H618, H618 and H700 was added to the sun50i
cpufreq-nvmem driver recently [1] however at the time some operating
points supported by the H700 (1.008, 1.032 and 1.512 GHz) and in use by
vendor BSPs were found to be unstable during testing, so the H700 speed
bin and the 1.032 GHz OPP were not included in the mainline driver.
Retesting with kernel 6.10rc2 (which carries additional fixes for the
driver) now shows stable operation with these points.
Add the H700 speed bin to the driver.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
[1] https://lore.kernel.org/linux-sunxi/20240418154408.1740047-1-andre.przywara@arm.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
loop for passive mode.
-----BEGIN PGP SIGNATURE-----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=6763
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.11-2024-06-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver updates for v6.11 from Mario Mario Limonciello:
"Add support for "Fast CPPC" which allows some CPUs to operate a tighter
loop for passive mode."
* tag 'amd-pstate-v6.11-2024-06-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq: amd-pstate: change cpu freq transition delay for some models
x86/cpufeatures: Add AMD FAST CPPC feature flag
There is a corner case where the desired_perf is exactly same as the old
perf, but the actual current freq is not.
This happens during S3 while the cpufreq governor is set to powersave.
During cpufreq resume process, the booting CPU's new_freq obtained via
.get() is the highest frequency, while the policy->cur and
cpu->perf_ctrls.desired_perf are set to the lowest level (powersave
governor). This causes the warning: "CPU frequency out of sync:", and
the cpufreq core sets policy->cur to new_freq.
Then the governor->limits() calls cppc_cpufreq_set_target() to
configures the CPU frequency and returns directly because the
desired_perf converted from target_freq is same as the
cpu->perf_ctrls.desired_perf and both are the lowest_perf.
Since target_freq and policy->cur have been already compared in
__cpufreq_driver_target(), there's no need to compare them again here.
Drop the comparison.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
[ Viresh: Updated commit message / subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a801 ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is
enabled in Emerald Rapids.
The OOB identifying bits are same as for the prior generation CPUs
like Sapphire Rapids servers, so also add Emerald Rapids to the
intel_pstate_cpu_oob_ids[] list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the same default EPPs as Meteor Lake generation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the default balance_performance EPP to 64. This gives better
performance and also perf/watt compared to current value of 115.
For example:
Speedometer 2.1
score: +19%
Perf/watt: +5.25%
Webxprt 4 score
score: +12%
Perf/watt: +6.12%
3DMark Wildlife extreme unlimited score
score: +3.2%
Perf/watt: +11.5%
Geekbench6 MT
score: +2.14%
Perf/watt: +0.32%
Also update balance_power EPP default to 179. With this change:
Video Playback power is reduced by 52%
Team video conference power is reduced by 35%
With Power profile daemon now sets balance_power EPP on DC instead of
balance_performance, updating balance_power EPP will help to extend
battery life.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Handle deferred probing gracefully by using dev_err_probe() to not
spam console with unnecessary error messages.
Fixes: f88d152dc7 ("cpufreq: ti: Migrate to dev_pm_opp_set_config()")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.
Call Trace:
<TASK>
generic_exec_single+0x58/0x120
smp_call_function_single+0xbf/0x110
rdmsrl_on_cpu+0x46/0x60
intel_pstate_get_hwp_cap+0x1b/0x70
intel_pstate_update_limits+0x2a/0x60
acpi_processor_notify+0xb7/0x140
acpi_ev_notify_dispatch+0x3b/0x60
HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bec ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cpufreq/cpufreq-dt-platdev.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e54 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The patch updates the function documentation comment for
longhaul_setstate to adhere to the kernel-doc specification.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make use of the __free() macro to automate memory deallocation when
the existing device nodes get out of scope, removing the need for
of_node_put() and therefore increasing code safety if more error paths
are added to the driver, which could miss the required of_node_put()
as it already occurred with commit '57f2f8b4aa ("cpufreq: qcom:
Refactor the driver to make it easier to extend")'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The code refactoring added new error paths between the np device node
allocation and the call to of_node_put(), which leads to memory leaks if
any of those errors occur.
Add the missing of_node_put() in the error paths that require it.
Cc: stable@vger.kernel.org
Fixes: 57f2f8b4aa ("cpufreq: qcom: Refactor the driver to make it easier to extend")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Conversion of target_freq to HZ in scmi_cpufreq_fast_switch()
can lead to overflow if the multiplied result is greater than
UINT_MAX, since type of target_freq is unsigned int. Avoid this
overflow by assigning target_freq to unsigned long variable for
converting it to HZ.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The for_each_child_of_node() loop does not decrement the child node
refcount before the break instruction, even though the node is no
longer required.
This can be avoided with the new for_each_child_of_node_scoped() macro
that removes the need for any of_node_put().
Fixes: fa5aec9561 ("cpufreq: sun50i: Add support for opp_supported_hw")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Like all other SoCs in IPQ5332 family, cpufreq for IPQ5321 is also
determined by the eFuse, with the maximum limit of 1.1GHz. Add support
for the same.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240325-ipq5321-sku-support-v2-3-f30ce244732f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix a memory leak in the exit path of amd-pstate (Peng Ma).
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=mGfT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings via
prctl, notably NPHIE which controls hashst/hashchk for ROP protection.
- Install powerpc selftests in sub-directories. Note this changes the way
run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove events.
- Other small features, cleanups and fixes.
Thanks to: Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann,
Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe
Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner,
Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz,
Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer,
Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas
Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta,
Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, Zhao Chenhui.
-----BEGIN PGP SIGNATURE-----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=GoCV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.
Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
To address the performance drop issue, an optimization has been
implemented. The incorrect highest performance value previously set by the
low-level power firmware for AMD CPUs with Family ID 0x19 and Model ID
ranging from 0x70 to 0x7F series has been identified as the cause.
To resolve this, a check has been implemented to accurately determine the
CPU family and model ID. The correct highest performance value is now set
and the performance drop caused by the incorrect highest performance value
are eliminated.
Before the fix, the highest frequency was set to 4200MHz, now it is set
to 4971MHz which is correct.
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ
0 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
1 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
2 0 0 1 1:1:1:0 yes 4971.0000 400.0000 4865.8140
3 0 0 1 1:1:1:0 yes 4971.0000 400.0000 400.0000
Fixes: f3a0523918 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218759
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Gaha Bana <gahabana@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This register number is hardware-specific, rename it for clarity.
FIXME comments are added in a few places where it seems like the wrong
register is used. As I can't test this, only the rename is done with no
functional change.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124105031.45734-1-matthias.schiffer@ew.tq-group.com
make C=1 currently gives the following warning:
drivers/cpufreq/intel_pstate.c:262: warning: Function parameter or struct member 'epp_cached' not described in 'cpudata'
Add the missing ":" to fix the trivial kernel-doc syntax error.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge AMD P-state driver changes from Perry Yuan for v6.10:
"- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature.
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing.
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability."
* amd-pstate:
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
A negative CPU number or frequency value may be printed if they are
really large (which is unlikely, though).
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
removed the unused variable `lowest_nonlinear_freq` for build warning.
This variable was defined and assigned a value in the previous code,
but it was not used in the subsequent code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271038.em6nJjzy-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
get some code format problems fixed in the amd-pstate driver.
Changes Made:
- Fixed incorrect comment format in the functions.
- Removed unnecessary blank line.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271148.HK9yHBlB-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add quirks table to get CPPC capabilities issue fixed by providing
correct perf or frequency values while driver loading.
If CPPC capabilities are not defined in the ACPI tables or wrongly
defined by platform firmware, it needs to use quick to get those
issues fixed with correct workaround values to make pstate driver
can be loaded even though there are CPPC capabilities errors.
The workaround will match the broken BIOS which lack of CPPC capabilities
nominal_freq and lowest_freq definition in the ACPI table.
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
0
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make pstate driver initially retrieve the P-state transition delay and
latency values from the BIOS ACPI tables which has more reasonable
delay and latency values according to the platform design and
requirements.
Previously there values were hardcoded at specific value which may
have conflicted with platform and it might not reflect the most
accurate or optimized setting for the processor.
[054h 0084 8] Preserve Mask : FFFFFFFF00000000
[05Ch 0092 8] Write Mask : 0000000000000001
[064h 0100 4] Command Latency : 00000FA0
[068h 0104 4] Maximum Access Rate : 0000EA60
[06Ch 0108 2] Minimum Turnaround Time : 0000
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The amd-pstate driver cannot work when the min_freq, nominal_freq or
the max_freq is zero. When this happens it is prudent to error out
early on rather than waiting failing at the time of the governor
initialization.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_get_{min,max,nominal,lowest_nonlinear}_freq() functions merely
return cpudata->{min,max,nominal,lowest_nonlinear}_freq values.
There is no loss in readability in replacing their invocations by
accesses to the corresponding members of cpudata.
Do so and remove these helper functions.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the amd_get_{min, max, nominal, lowest_nonlinear}_freq()
helpers computes the values of min_freq, max_freq, nominal_freq and
lowest_nominal_freq respectively afresh from
cppc_get_perf_caps(). This is not necessary as there are fields in
cpudata to cache these values.
To simplify this, add a single helper function named
amd_pstate_init_freq() which computes all these frequencies at once, and
caches it in cpudata.
Use the cached values everywhere else in the code.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Co-developed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dt_has_supported_hw() function returns type bool. That means these
negative error codes are cast to true but the function should return
false instead.
Fixes: fa5aec9561 ("cpufreq: sun50i: Add support for opp_supported_hw")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is a compile warning because a NULL pointer check was added before
a struct was declared. This moves the NULL pointer check to after the
struct is declared and moves the struct assignment to after the NULL
pointer check.
Fixes: f661017e6d ("cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value")
Signed-off-by: Portia Stephens <portia.stephens@canonical.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-5-vincent.guittot@linaro.org
Provide to the scheduler a feedback about the temporary max available
capacity. Unlike arch_update_thermal_pressure(), this doesn't need to be
filtered as the pressure will happen for dozens of ms or more.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20240326091616.3696851-2-vincent.guittot@linaro.org