[ Upstream commit 30796d0dcb ]
CPU port should also be enabled in order to get a working switch.
Fixes: a5538a777b ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c934dd88 ]
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d982635126 ]
The controller will always generate a completion interrupt when the
transfer is finished normally or not. Currently we use either error or
completion interrupt to finish, this may result the completion
interrupt unhandled and corrupt the next transfer, especially at low
speed mode. Since on error case, the error interrupt will come first
then is the completion interrupt. So only use the completion interrupt
to finish the whole transfer process.
Fixes: d62fbdb99a ("i2c: add support for HiSilicon I2C controller")
Reported-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5190417bdf ]
We found that after commit 9c46929e79
("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems"), the
PCF85063 RTC driver stopped working on i.MX28 due to regmap_bulk_read()
reading bogus data into a stack buffer. This is caused by the i2c-mxs
driver using DMA transfers even for messages without the I2C_M_DMA_SAFE
flag, and the aforementioned commit enabling vmapped stacks.
As the MXS I2C controller requires DMA for reads of >4 bytes, DMA can't be
disabled, so the issue is fixed by using i2c_get_dma_safe_msg_buf() to
create a bounce buffer when needed.
Fixes: 9c46929e79 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c78850045 ]
When reading from I2C, the Tx watermark is set to 0. Unfortunately the
TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less
than watermark. So it is set in every case, hence the reset default of 1.
This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying
to send Tx data on a read message.
Mask the IRQ status to filter for wanted flags only.
Fixes: a55fa9d0e4 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4cc3d3f4 ]
The check introduced in the commit a5fd39464a ("igc: Lift TAPRIO schedule
restriction") can detect a false positive error in some corner case.
For instance,
tc qdisc replace ... taprio num_tc 4
...
sched-entry S 0x01 100000 # slot#1
sched-entry S 0x03 100000 # slot#2
sched-entry S 0x04 100000 # slot#3
sched-entry S 0x08 200000 # slot#4
flags 0x02 # hardware offload
Here the queue#0 (the first queue) is on at the slot#1 and #2,
and off at the slot#3 and #4. Under the current logic, when the slot#4
is examined, validate_schedule() returns *false* since the enablement
count for the queue#0 is two and it is already off at the previous slot
(i.e. #3). But this definition is truely correct.
Let's fix the logic to enforce a strict validation for consecutively-opened
slots.
Fixes: a5fd39464a ("igc: Lift TAPRIO schedule restriction")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02c83791ef ]
vf reset nack actually represents the reset operation itself is
performed but no address is assigned. Therefore, e1000_reset_hw_vf
should fill the "perm_addr" with the zero address and return success on
such an occasion. This prevents its callers in netdev.c from saying PF
still resetting, and instead allows them to correctly report that no
address is assigned.
Fixes: 6ddbc4cf1f ("igb: Indicate failure on vf reset for empty mac address")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85eb39bb39 ]
In igbvf_request_msix(), irqs have not been freed on the err path,
we need to free it. Fix it.
Fixes: d4e0fe01a3 ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 964290ff32 ]
When an interface with the maximum number of VLAN filters is brought up,
a spurious error is logged:
[257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3
[257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported.
The VF driver complains that it cannot add the VLAN 0 filter.
On the other hand, the PF driver always adds VLAN 0 filter on VF
initialization. The VF does not need to ask the PF for that filter at
all.
Fix the error by not tracking VLAN 0 filters altogether. With that, the
check added by commit 0e710a3ffd ("iavf: Fix VF driver counting VLAN 0
filters") in iavf_virtchnl.c is useless and might be confusing if left as
it suggests that we track VLAN 0.
Fixes: 0e710a3ffd ("iavf: Fix VF driver counting VLAN 0 filters")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de58647b43 ]
Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type
of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP.
Originally, i40e, ice and iavf were affected.
Commit 73df8c9e3e ("i40e: Correct UDP packet header for non_tunnel-ipv6")
fixed that in i40e, then
commit 638a0c8c88 ("ice: fix incorrect payload indicator on PTYPE")
fixed that for ice.
IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash
type for such packets, so that the stack won't calculate it on CPU when
needs it.
Fixes: 206812b5fc ("i40e/i40evf: i40e implementation for skb_set_hash")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32d57f667f ]
Condition, which checks whether the netdev has hashing enabled is
inverted. Basically, the tagged commit effectively disabled passing flow
hash from descriptor to skb, unless user *disables* it via Ethtool.
Commit a876c3ba59 ("i40e/i40evf: properly report Rx packet hash")
fixed this problem, but only for i40e.
Invert the condition now in iavf and unblock passing hash to skbs again.
Fixes: 857942fd1a ("i40e: Fix Rx hash reported to the stack by our driver")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7df4813b1 ]
The number of chunks can overflow u32. Make sure to return -EINVAL on
overflow. Also remove a redundant u32 cast assigning umem->npgs.
Fixes: bbff2f321a ("xsk: new descriptor addressing scheme")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230308174013.1114745-1-kal.conley@dectris.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21fd9e8700 ]
When the user's login time is newer than the cache's timestamp,
the original entry in the RB-tree will be replaced by a new entry.
Currently, the timestamp is only set if the entry is not found in
the RB-tree, which can cause the timestamp to be undefined when
the entry exists. This may result in a significant increase in
ACCESS operations if the timestamp is set to zero.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Fixes: 0eb43812c0 ("NFS: Clear the file access cache upon login”)
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c88ea00fe ]
Prior to commit 8786fde842 ("Convert NFS from readpages to
readahead"), nfs_readpages() used the old mm interface read_cache_pages()
which called task_io_account_read() for each NFS page read. After
this commit, nfs_readpages() is converted to nfs_readahead(), which
now uses the new mm interface readahead_page(). The new interface
requires callers to call task_io_account_read() themselves.
In addition, to nfs_readahead() task_io_account_read() should also
be called from nfs_read_folio().
Fixes: 8786fde842 ("Convert NFS from readpages to readahead")
Link: https://lore.kernel.org/linux-nfs/CAPt2mGNEYUk5u8V4abe=5MM5msZqmvzCVrtCP4Qw1n=gCHCnww@mail.gmail.com/
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3cdf73048 ]
Add them to the SoC .dtsi, so that not every board has to specify them.
Fixes: 1225396fef ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit feafeb5314 ]
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d123 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0deefb5bd1 ]
The hibernation mode of AR8031 PHY defaults to be enabled after hardware
reset. When the cable is unplugged, the PHY will enter hibernation mode
after about 10 senconds and the PHY clocks will be stopped to save
power. However, due to the design of EQOS, the mac needs the RX_CLK of
PHY for software reset to complete. Otherwise the software reset of EQOS
will be failed and do not work correctly. The only way is to disable
hibernation mode of AR8031 PHY for EQOS, the "qca,disable-hibernation-mode"
property is used for this purpose and has already been submitted to the
upstream, for more details please refer to the below link:
https://lore.kernel.org/netdev/20220818030054.1010660-2-wei.fang@nxp.com/
This issue is easy to reproduce, just unplug the cable and "ifconfig eth0
down", after about 10 senconds, then "ifconfig eth0 up", you will see
failure log on the serial port. The log is shown as following:
root@imx8dxlevk:~#
[34.941970] imx-dwmac 5b050000.ethernet eth0: Link is Down
root@imx8dxlevk:~# ifconfig eth0 down
[35.437814] imx-dwmac 5b050000.ethernet eth0: FPE workqueue stop
[35.507913] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[35.518613] imx-dwmac 5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
root@imx8dxlevk:~# ifconfig eth0 up
[71.143044] imx-dwmac 5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[71.215855] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[72.230417] imx-dwmac 5b050000.ethernet: Failed to reset the dma
[72.236512] imx-dwmac 5b050000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[72.245258] imx-dwmac 5b050000.ethernet eth0: __stmmac_open: Hw setup failed
SIOCSIFFLAGS: Connection timed out
After applying this patch, the software reset of EQOS will be
successful. And the log is shown as below.
root@imx8dxlevk:~# ifconfig eth0 up
[96.114344] imx-dwmac 5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[96.171466] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[96.188883] imx-dwmac 5b050000.ethernet eth0: No Safety Features support found
[96.196221] imx-dwmac 5b050000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[96.204846] imx-dwmac 5b050000.ethernet eth0: registered PTP clock
[96.225558] imx-dwmac 5b050000.ethernet eth0: FPE workqueue start
[96.236858] imx-dwmac 5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
[96.249358] 8021q: adding VLAN 0 to HW filter on device eth0
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: feafeb5314 ("arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b3a149db4 ]
Commit 732ea9db9d ("efi: libstub: Move screen_info handling to common
code") reorganized the earlycon handling so that all architectures pass
the screen_info data via a EFI config table instead of populating struct
screen_info directly, as the latter is only possible when the EFI stub
is baked into the kernel (and not into the decompressor).
However, this means that struct screen_info may not have been populated
yet by the time the earlycon probe takes place, and this results in a
non-functional early console.
So let's probe again right after parsing the config tables and
populating struct screen_info. Note that this means that earlycon output
starts a bit later than before, and so it may fail to capture issues
that occur while doing the early EFI initialization.
Fixes: 732ea9db9d ("efi: libstub: Move screen_info handling to common code")
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41130c32f3 ]
Trying to probe a mt7921e pci card without firmware results in a
successful probe where ieee80211_register_hw hasn't been called. When
removing the driver, ieee802111_unregister_hw is called unconditionally
leading to a kernel NULL pointer dereference.
Fix the issue running mt76_unregister_device routine just for registered
hw.
Link: https://bugs.debian.org/1029116
Link: https://bugs.kali.org/view.php?id=8140
Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Fixes: 1c71e03afe ("mt76: mt7921: move mt7921_init_hw in a dedicated work")
Tested-by: Helmut Grohne <helmut@freexian.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/be3457d82f4e44bb71a22b2b5db27b644a37b1e1.1677107277.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06615d11cc ]
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes: c1a281e34d ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c29d6921 ]
In bq24190_probe, &bdi->input_current_limit_work is bound
with bq24190_input_current_limit_work. When external power
changed, it will call bq24190_charger_external_power_changed
to start the work.
If we remove the module which will call bq24190_remove to make
cleanup, there may be a unfinished work. The possible
sequence is as follows:
CPU0 CPUc1
|bq24190_input_current_limit_work
bq24190_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_get_property_from_supplier
| //use
Fix it by finishing the work before cleanup in the bq24190_remove
Fixes: 9777467257 ("power_supply: Initialize changed_work before calling device_add")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8013295662 ]
For uniquely identifying the vadc channels, label property has to be used.
The initial commit adding vadc support assumed that the driver will use the
unit address along with the node name to identify the channels. But this
assumption is now broken by,
commit 701c875ade ("iio: adc: qcom-spmi-adc5: Fix the channel name") that
stripped unit address from channel names. This results in probe failure of
the vadc driver:
[ 8.380370] iio iio:device0: tried to double register : in_temp_pmic-die-temp_input
[ 8.380383] qcom-spmi-adc5 c440000.spmi:pmic@0:adc@3100: Failed to register sysfs interfaces
[ 8.380386] qcom-spmi-adc5: probe of c440000.spmi:pmic@0:adc@3100 failed with error -16
Hence, let's get rid of the assumption about drivers and rely on label
property to uniquely identify the channels.
The labels are derived from the schematics for each PMIC. For internal adc
channels such as die and xo, the PMIC names are used as a prefix.
Fixes: 7c01513474 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} ADC_TM5 channels")
Fixes: 9d41cd1739 ("arm64: dts: qcom: sc8280xp-x13s: Add PMR735A VADC channel")
Fixes: 3375151a71 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} VADC channels")
Fixes: 9a6b3042c5 ("arm64: dts: qcom: sc8280xp-x13s: Add PMK8280 VADC channels")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230211052415.14581-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4334a06d ]
The correct clock order is "fspi_en" and "fspi". As they are identical
just reordering the names is sufficient.
Fixes: 6276d66984 ("arm64: dts: imx8dxl: add flexspi0 support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbd6c1b17d ]
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbd6c1b17d)
Modified for stable backport as a lot of the code in this file was moved
in 6.3 to drivers/gpu/drm/amd/display/dc/link/link_detection.c.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 709671ffb1 ]
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b214bb718 ]
[Why & How]
When k1 and k2 divider programming logic is executed for a phantom
stream, the corresponding master stream should be used for the
calculation. Fix the if condition to use the master stream for checking
signal type instead of the phantom stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 709671ffb1 ("drm/amd/display: Remove OTG DIV register write for Virtual signals.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71c7a30442 ]
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baf1b12a67 ]
Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.
Fixes: 09f5e7dc7a ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87e8fab191 ]
Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f77ebdda0e ]
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
Fortunately this overallocates memory rather then allocating less memory
than required.
Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.
Fixes: 5bc9900add ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fd0815f632 upstream.
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.
Fixes: 2e498d0a74 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72f7754dcf upstream.
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff7 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab82374 (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274b ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c8 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc6 ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4ae42cc6 upstream.
snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.
Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fdb6cc7c8 upstream.
This makes the code flow a lot easier to follow.
No functional changes.
[ Tom: touchups. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
