commit 47b6bcef6e upstream.
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.
That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.
Require both the start and end framing headers to be present before
subtracting them, on every loop iteration.
Fixes: d40261236e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/178211531778.2216480.12637613349790980750@maoyixie.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03866d130e upstream.
The dqp->q_id == 0 check inside the XFS_DQTYPE_BIGTIME block is
unreachable because root dquots return successfully earlier. Reject root
dquots with XFS_DQTYPE_BIGTIME before that early return, preserving the
intended validation and removing the unreachable condition.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4ea1ff3b49 ("xfs: widen ondisk quota expiration timestamps to handle y2038+")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e7a690fe4 upstream.
Syzbot reported a hung task in nilfs_transaction_begin() where multiple
tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds
waiting to acquire ns_segctor_sem for read:
INFO: task syz.0.17:5918 blocked for more than 143 seconds.
Call Trace:
schedule+0x164/0x360
rwsem_down_read_slowpath+0x6d9/0x940
down_read+0x99/0x2e0
nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221
nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921
notify_change+0xc1a/0xf40
chmod_common+0x273/0x4a0
do_fchmodat+0x12d/0x230
The writer holding ns_segctor_sem was a concurrent
NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting
per-element warnings from nilfs_sufile_updatev():
__nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78
nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186
nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline]
nilfs_free_segments fs/nilfs2/segment.c:1140 [inline]
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline]
nilfs_segctor_do_construct+0x1f55/0x76c0
nilfs_clean_segments+0x3bd/0xa50
nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline]
nilfs_ioctl+0x261f/0x2780
The root cause is that user-supplied segment numbers are not validated
before nilfs_clean_segments() begins doing work; the range check on
each segnum is performed deep inside the call chain by
nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry
while still holding the segctor lock and the sufile mi_sem. Under load
(repeated invocations across multiple mounts saturating the global
printk path), the cumulative printk latency keeps ns_segctor_sem held
long enough to trip the hung_task watchdog, blocking concurrent
operations such as chmod() that need ns_segctor_sem for read.
Fix by validating the contents of kbufs[4] in nilfs_clean_segments()
immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().
Holding ns_segctor_sem serializes the check against
nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation
uses a consistent value. Out-of-range segment numbers are rejected
with -EINVAL before any segment-cleaning work begins, so the bad
entries never reach the per-element diagnostic path inside
nilfs_sufile_updatev().
Reported-by: syzbot+62f0f99d2f2bb8e3bbd7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=62f0f99d2f2bb8e3bbd7
Tested-by: syzbot+62f0f99d2f2bb8e3bbd7@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Fixes: 071cb4b819 ("nilfs2: eliminate removal list of segments")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d67aadee19 upstream.
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken.
Reported-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=217eb327242d08197efb
Tested-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com
Fixes: a431930c9b ("hfs: fix slab-out-of-bounds in hfs_bnode_read()")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260505111300.3592757-3-tristmd@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f784fcea45 upstream.
sensor_hub_input_attr_get_raw_value() is limited to returning a single
32-bit value, which is insufficient for sensors that report data larger
than 32 bits, such as a quaternion with four s16 elements.
Add sensor_hub_input_attr_read_values() that accepts a caller-provided
buffer and accumulates incoming data until the buffer is full. The two
paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size
being non-zero, preserving backward compatibility.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Co-developed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7705b4140d upstream.
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event().
Fixes: 97b741aba9 ("HID: lg-g15: Add keyboard and LCD backlight control")
Cc: stable@vger.kernel.org
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec2612b8ad upstream.
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c1d6708bf0 ("HID: wacom: Do not register input devices until after hid_hw_start")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87bd2ad568 upstream.
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611161738.97043-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 266d3dd8b7 upstream.
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently.
Fixes: 0f1d683fb3 ("[CPUFREQ] Processor Clocking Control interface driver")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260416144621.93964-1-dbgh9129@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9029dd556 upstream.
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
Fixes: 65650b3513 ("cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown")
Signed-off-by: Tianxiang Chen <nanmu@xiaomi.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260408141914.35281-1-nanmu@xiaomi.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd29c017ae upstream.
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled.
Fixes: b6366f048e ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
Closes: https://lore.kernel.org/all/20260506235716.2530720-1-tj@kernel.org/
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260515103740.25ccbed8@gandalf.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcbdaa1086 upstream.
When a CPU goes offline with HWP disabled, intel_pstate_set_min_pstate()
sets the MSR_IA32_PERF_CTL to minimum frequency to prevent SMT siblings
from being restricted. However, the policy->cur value was not updated,
leaving it at the previous value.
When the CPU comes back online, governor->limits() checks if target_freq
equals policy->cur and skips the frequency adjustment if they match. Since
policy->cur still holds the previous value, the governor does not call
cpufreq_driver->target to update MSR_IA32_PERF_CTL.
Fix this by synchronizing policy->cur with the hardware state when setting
minimum pstate during CPU offline.
Fixes: bb18008f80 ("intel_pstate: Set core to min P state during core offline")
Cc: stable@vger.kernel.org # 3.15+
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
[ rjw: Subject refinement ]
Link: https://patch.msgid.link/20260520032119.30615-1-fushuai.wang@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 983512f3a8 upstream.
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4d ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted sk_set_socket() in include/net/sock.h to fix the conflict from
not having commit 5d6b58c932 ("net: lockless sock_i_ino()") and the
additional previous changes required by it.
It comes down to just now having the lines of
if (sock) {
WRITE_ONCE(sk->sk_uid, SOCK_INODE(sock)->i_uid);
WRITE_ONCE(sk->sk_ino, SOCK_INODE(sock)->i_ino);
}
below the changed line. ]
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 687617555c upstream.
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length.
Fixes: 7c9cbd0b5e ("Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bd0b27405 upstream.
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths.
Fixes: ab1513597c ("Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()")
Reported-by: syzbot+674ff7e4d7fdfd572afc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=674ff7e4d7fdfd572afc
Cc: stable@vger.kernel.org
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb067a99a0 upstream.
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference.
Fixes: 65f53e9802 ("Bluetooth: Access BNEP session addresses through L2CAP channel")
Reported-by: syzbot+fed5dce4553262f3b35c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fed5dce4553262f3b35c
Cc: stable@vger.kernel.org
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a622d2e960 upstream.
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 81e675c227 ("netfilter: ebtables: add CONFIG_COMPAT support")
Cc: stable@vger.kernel.org
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 084d23f818 upstream.
We need to explicitly check the length, else we may pass non-null
terminated string to request_module().
Cc: stable@vger.kernel.org
Fixes: bcf4934288 ("netfilter: ebtables: Fix extension lookup with identical name")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b2c1d41bc upstream.
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0
Cc: stable@vger.kernel.org
Fixes: 1c1d152cc5 ("platform/chrome: cros_ec_dev - utilize new cdev_device_add helper function")
Co-developed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260427131721.1165078-1-akuchynski@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efb8763d7b upstream.
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow.
Fixes: 91cc17c0e5 ("[TCP]: MTUprobe: receiver window & data available checks fixed")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/1a5b7e1ef4d70fbad8c8ee0b82d8405f3c964a3d.1781395200.git.bronzed_45_vested@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7993211bde upstream.
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
Call Trace:
<IRQ>
dump_stack_lvl+0x67/0x90
print_report+0x175/0x7c0
kasan_report+0x147/0x180
ip_check_mc_rcu+0x149/0x3f0
udp_v4_early_demux+0x36d/0x12d0
ip_rcv_finish_core+0xb8b/0x1390
ip_rcv_finish+0x54/0x120
NF_HOOK+0x213/0x2b0
__netif_receive_skb+0x126/0x340
process_backlog+0x4f2/0xf00
__napi_poll+0x92/0x2c0
net_rx_action+0x583/0xc60
handle_softirqs+0x236/0x7f0
do_softirq+0x57/0x80
</IRQ>
Allocated by task 2239:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x72/0x90
____ip_mc_inc_group+0x31a/0xa40
__ip_mc_join_group+0x334/0x3f0
do_ip_setsockopt+0x16fa/0x2010
ip_setsockopt+0x3f/0x90
do_sock_setsockopt+0x1ad/0x300
Freed by task 0:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x40/0x50
__kasan_slab_free+0x3a/0x60
__rcu_free_sheaf_prepare+0xd4/0x220
rcu_free_sheaf+0x36/0x190
rcu_core+0x8d9/0x12f0
handle_softirqs+0x236/0x7f0
Fixes: e989707135 ("igmp: hash a hash table to speedup ip_check_mc_rcu()")
Cc: stable@vger.kernel.org
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260701235014.73505-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29bef9934b upstream.
commit 10dc959398 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time.
Fixes: 10dc959398 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260527172203.2043962-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90f0109019 upstream.
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks.
Fixes: 25518e024e ("gpio: Add Spreadtrum EIC driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260617154035.1199948-3-runyu.xiao@seu.edu.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dcddc1c79 upstream.
ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive
the vector number. pci_irq_vector() calls msi_get_virq() that takes a
mutex and can therefore trigger "scheduling while atomic" splats:
BUG: scheduling while atomic: kworker/u33:0/55/0x00010001
...
Call trace:
...
schedule+0x38/0x110
schedule_preempt_disabled+0x28/0x50
__mutex_lock.constprop.0+0x848/0x908
__mutex_lock_slowpath+0x18/0x30
mutex_lock+0x4c/0x60
msi_domain_get_virq+0xe8/0x138
pci_irq_vector+0x2c/0x60
ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf]
__handle_irq_event_percpu+0x70/0x3a8
handle_irq_event+0x48/0x100
handle_edge_irq+0x100/0x1c8
...
Cache the Linux IRQ number for vector 0 when vectors are allocated and
use it as a base in the ISR. Running the ISR in a threaded IRQ handler
would also avoid the problem, but that would be unnecessary here.
Fixes: 812ce2f8d1 ("NTB: Add support for EPF PCI Non-Transparent Bridge")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: stable@vger.kernel.org # v5.12+
Link: https://patch.msgid.link/20260304083028.1391068-3-den@valinux.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57382ec6ac upstream.
In the analysis pass of $LogFile journal replay, log_replay() copies
LCNs from each action log record into an existing Dirty Page Table
(DPT) entry without bounding the destination index. A crafted NTFS
image with DPT entry lcns_follow=1 and an action log record with
lcns_follow=2 produces a kernel slab out-of-bounds write at mount
time:
BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60
Write of size 8 at addr ffff8880095e1040 by task mount
Two attacker-controlled fields can drive j+i past the allocated
page_lcns[] array:
1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow.
2. lrh->target_vcn may be smaller than dp->vcn, making the u64
subtraction wrap to a huge size_t.
Validate target VCN delta and per-record LCN count against the
DPT entry capacity, bail via the existing out: cleanup label with
-EINVAL.
This mirrors the bounds-check pattern added in commit b2bc7c44ed
("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot")
and commit 0ca0485e4b ("fs/ntfs3: validate rec->used in
journal-replay file record check").
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Reported-by: Yunpeng Tian <shionthanatos@gmail.com>
Reported-by: Mingda Zhang <npczmd@qq.com>
Reported-by: Gongming Wang <gmwgg05@gmail.com>
Reported-by: Peiyuan Xu <paulbucket12@gmail.com>
Reported-by: Qinrun Dai <jupmouse@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yunpeng Tian <shionthanatos@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81dde13cc upstream.
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places.
Fixes: b84d435cc2 ("debugobjects: Extend to assert that an object is initialized")
Reported-by: syzbot+5e8dda76ca21dae314b6@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/874iiwlzlb.ffs@fw13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9a71daaec upstream.
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
Cc: stable@vger.kernel.org
Fixes: 3197542482 ("audit: rework audit_log_start()")
Signed-off-by: Chi Wang <wangchi@kylinos.cn>
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: line length tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d129c3177d upstream.
pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by
allocating x->calg and copying only the algorithm name:
x->calg = kmalloc_obj(*x->calg);
if (!x->calg) {
err = -ENOMEM;
goto out;
}
strcpy(x->calg->alg_name, a->name);
x->props.calgo = sa->sadb_sa_encrypt;
Unlike the authentication (x->aalg) and encryption (x->ealg) branches of
the same function, the compression branch never initializes
calg->alg_key_len. IPComp carries no key and the allocation only
reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field
is left containing uninitialized slab data.
calg->alg_key_len is later used as a length by xfrm_algo_clone() when an
IPComp state is cloned during XFRM_MSG_MIGRATE:
xfrm_state_migrate()
xfrm_state_clone_and_setup()
x->calg = xfrm_algo_clone(orig->calg);
kmemdup(orig, xfrm_alg_len(orig));
where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With
a non-zero garbage alg_key_len, kmemdup() reads past the end of the
68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating
it triggers (net-next, KASAN, init_on_alloc=0):
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60
Read of size 4164 at addr ff11000025a74980 by task diag2/9287
CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xf7/0x600
kasan_report+0xe4/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x44/0x60
xfrm_state_migrate+0x70a/0x1da0
xfrm_migrate+0x753/0x18a0
xfrm_do_migrate+0xb47/0xf10
xfrm_user_rcv_msg+0x411/0xb50
netlink_rcv_skb+0x158/0x420
xfrm_netlink_rcv+0x71/0x90
netlink_unicast+0x584/0x850
netlink_sendmsg+0x8b0/0xdc0
____sys_sendmsg+0x9f7/0xb90
___sys_sendmsg+0x134/0x1d0
__sys_sendmsg+0x16d/0x220
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 9287:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
pfkey_add+0x2652/0x2ea0
pfkey_process+0x6d0/0x830
pfkey_sendmsg+0x42c/0x850
__sys_sendto+0x461/0x4b0
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ff11000025a74980
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
allocated 68-byte region [ff11000025a74980, ff11000025a749c4)
Depending on the uninitialized value the same field can instead request
an oversized kmemdup() allocation and make the migration clone fail.
The XFRM netlink path is not affected: verify_one_alg() rejects an
XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via
XFRM_MSG_NEWSA is always self-consistent.
Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Cc: stable@vger.kernel.org
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8001e1a51 upstream.
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-5-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bf39f711f upstream.
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info().
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-7-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef61d628df upstream.
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-3-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed51de4a86 upstream.
The IE parsing loop in update_beacon_info() advances by
(pIE->length + 2) each iteration but only guards on i < len.
When a malicious AP sends a Beacon whose last IE has only one byte
remaining in the frame (the element_id byte lands at len-1), the loop
reads pIE->length from one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond len, passing a truncated IE
to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past len.
Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length
for consistency with the sizeof(*pIE) guards added above.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-2-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9654207e9 upstream.
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1fc19d61f upstream.
OnAuth() has two bugs in the shared-key authentication path.
When the Privacy bit is set, rtw_wep_decrypt() is called without
verifying that the frame is long enough to contain a valid WEP IV and
ICV. Inside rtw_wep_decrypt(), length is computed as:
length = len - WLAN_HDR_A3_LEN - iv_len
and then passed as (length - 4) to crc32_le(). If len is less than
WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative
and, after the implicit cast to size_t, causes crc32_le() to read far
beyond the frame buffer. Add a minimum length check before accessing
the IV field and calling the decryption path.
When processing a seq=3 response, rtw_get_ie() stores the Challenge
Text IE length in ie_len, but the subsequent memcmp() always reads 128
bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of
exactly 128 bytes; reject any IE whose length field differs, matching
the check already applied to OnAuthClient().
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004605.1039209-1-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4d51e55dd upstream.
The load_primary_binaries() function is overly complex and has som large
variables on the stack, which can cause warnings depending on CONFIG_FRAME_WARN
setting:
drivers/staging/media/atomisp/pci/sh_css.c: In function 'load_primary_binaries':
drivers/staging/media/atomisp/pci/sh_css.c:5260:1: error: the frame size of 1560 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Half of the stack usage is for the prim_descr[] array, but only one
member of the array is used at any given time.
Reduce the stack usage by turning the array into a single structure.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c32fe4c491 upstream.
If the driver's stripe information is invalid it can result in an integer
underflow. Add a range check to avoid this kind of error.
This patch fixes the following smatch error:
drivers/staging/media/ipu3/ipu3-css-params.c:1792 imgu_css_cfg_acc_stripe() warn: 'acc->stripe.bds_out_stripes[0]->width - 2 * f' 4294967168 can't fit into 65535 'acc->stripe.bds_out_stripes[1]->offset'
Cc: stable@vger.kernel.org
Fixes: e11110a5b7 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b66974a1b upstream.
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state.
Fixes: d7626b5acf ("tipc: introduce Gap ACK blocks for broadcast link")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260625143815.1525412-1-sam@bynar.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1720db928e upstream.
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP.
Fixes: 92aa7c65d2 ("6lowpan: add generic nhc layer interface")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://patch.msgid.link/20260609080054.4541-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 010382937f upstream.
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Fixes: c8540870af ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()")
Cc: stable <stable@kernel.org>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abf76d3239 upstream.
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20EC9664-054E-438B-B411-2145D347F97B@gmail.com/
Tested-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/bb5b1dc6-eb59-43e1-8d26-51e658e88bbe@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3046eeada upstream.
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd0 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request.
Fixes: f7f510ec19 ("virtio: An entropy device, as suggested by hpa.")
Cc: stable@vger.kernel.org
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260531142251.2792061-1-michael.bommarito@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c687bc3569 upstream.
Driver core expects devices to be allocated dynamically and complains
loudly when a device that lacks a release function is freed.
Use __root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that root_device_register(), which also creates a link to the
module, cannot be used as the device is registered when parsing the
module parameters which happens before the module kobject has been set
up.
Fixes: 81a054ce0b ("virtio-mmio: Devices parameter parsing")
Cc: stable@vger.kernel.org # 3.5
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260427143710.14702-1-johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cd9103283 upstream.
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception
Fixes: 8a02bdd50b ("netfilter: ipset: Fix calling ip_set() macro at dumping")
Cc: stable@vger.kernel.org
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fda8749ba7 upstream.
pci_host_common_init() is used by several generic ECAM host drivers.
After PCI core changes around pci_flags and preserve_config, these hosts
no longer opted into full bus number reassignment the way they did
before, which broke enumeration of devices on a Marvell CN106XX board.
When PCI_PROBE_ONLY is not set, add PCI_REASSIGN_ALL_BUS so
pci_scan_bridge_extend() takes the reassignment path: bus numbers can be
assigned from firmware EA data (e.g. pci_ea_fixed_busnrs()). Skip the
flag in probe-only mode so existing assignments are not overridden.
Fixes: 7246a4520b ("PCI: Use preserve_config in place of pci_flags")
Closes: https://lore.kernel.org/all/abkqm_LCd9zAM8cW@rkannoth-OptiPlex-7090/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add problem report link]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260414081730.3864372-1-rkannoth@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef4bac021 upstream.
altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq.
However, pcie->irq is the parent IRQ returned by platform_get_irq(), not
the mapping created by Altera INTx irq_domain.
The Altera driver only sets the chained handler on the parent IRQ. It
should detach that handler during teardown, but it should not dispose the
parent IRQ mapping, which belongs to the parent interrupt controller's
irq_domain.
Drop irq_dispose_mapping(pcie->irq) from the teardown path.
Note that during irqchip remove(), the child IRQs should've disposed. But
since the chained handler itself is removed, there is no way the stale
child IRQs (if exists) could fire. So it is safe here.
Fixes: ec15c4d0d5 ("PCI: altera: Allow building as module")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: added a note about IRQ disposal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42c37c4b75 upstream.
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Call trace:
dma_free_attrs+0x174/0x220
xhci_free_stream_info+0xd0/0x11c
xhci_free_streams+0x278/0x37c
usb_free_streams+0x98/0xc0
usb_unbind_interface+0x1b8/0x2f8
device_release_driver_internal+0x1d4/0x2cc
device_release_driver+0x18/0x28
bus_remove_device+0x160/0x1a4
device_del+0x1ec/0x350
usb_disable_device+0x98/0x214
usb_disconnect+0xf0/0x35c
hub_event+0xab4/0x19ec
process_one_work+0x278/0x63c
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed.
Fixes: 8df75f42f8 ("USB: xhci: Add memory allocation for USB3 bulk streams.")
Cc: stable <stable@kernel.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f223d27a54 upstream.
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x1a0
binder_free_transaction+0x8c/0x320
binder_send_failed_reply+0x21c/0x2f8
binder_thread_release+0x488/0x7e0
binder_ioctl+0x12c0/0x29a0
[...]
Allocated by task 675:
__kmalloc_cache_noprof+0x174/0x444
binder_open+0x118/0xb70
do_dentry_open+0x374/0x1040
vfs_open+0x58/0x3bc
[...]
Freed by task 212:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_proc_dec_tmpref+0x32c/0x5e0
binder_deferred_func+0xc48/0x104c
process_one_work+0x53c/0xbc0
[...]
==================================================================
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths.
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/all/aikJKVuny_eOivwN@google.com/
Fixes: a370003cc3 ("binder: fix possible UAF when freeing buffer")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260619185233.2194678-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 114a116aaa upstream.
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_thread_release+0x5d0/0x798
binder_ioctl+0x12c0/0x299c
[...]
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc.
Cc: stable <stable@kernel.org>
Fixes: 7a4408c6bd ("binder: make sure accesses to proc/thread are safe")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260619185233.2194678-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maoyi Xie
Alexey Nepomnyashih
Deepanshu Kartikey
Tristan Madani
Srinivas Pandruvada
Myeonghun Pak
WenTao Liang
Yuho Choi
Tianxiang Chen
Steven Rostedt
Fushuai Wang
Sebastian Andrzej Siewior
Muhammad Bilal
Yousef Alhouseen
Xiang Mei
Florian Westphal
Andrei Kuchynski
Wyatt Feng
Yuyang Huang
Runyu Xiao
Koichiro Den
Yunpeng Tian
Thomas Gleixner
Chi Wang
Zijing Yin
Dawei Feng
Alexandru Hossu
Arnd Bergmann
Ricardo Ribalda
Samuel Page
Yizhou Zhao
Alan Stern
Michael Bommarito
Johan Hovold
Ratheesh Kannoth
Mahesh Vaidya
胡连勤
Carlos Llamas