The 32-bit MSR interface rdmsr() is planned to be removed. Use the
related 64-bit variant instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260629060526.3638272-30-jgross@suse.com
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes: c1aa8347e7 ("gue: Protocol constants for remote checksum offload")
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add PCI IDs for Qualcomm QCA2066/QCNFA765 to the M.2 serdev ID table,
mapping it to the qcom,qca2066-bt compatible string.
The Subsystem Vendor ID (SVID) 0x0108 distinguishes the QCA2066 from
the WCN6855.
This allows the pwrseq-pcie-m2 driver to automatically create the
Bluetooth serdev device when a QCA2066-based M.2 card is enumerated.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702-monza-wireless-v2-2-7b56e2a6a6d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Successful driver probing should be silent. Drop unconditional
dev_info() call that is done at nmk_gpio_probe() exit.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260701-gpio-nomadik-silent-v1-5-644d10316cef@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
gpio-nomadik depends on a few resources. In one case the reset is taking
time to show up leading to a boot log containing:
[ 0.544230] nomadik-gpio 1400000.gpio: failed getting reset control: -EPROBE_DEFER
Fix by replacing all dev_err() calls that might be made at probe with
dev_err_probe().
On nomadik platforms, the nmk_gpio_populate_chip() log calls might
attach their reasons to the gpio or pinctrl device depending on boot
order.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260701-gpio-nomadik-silent-v1-4-644d10316cef@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Now that all error codepaths in nmk_gpio_populate_chip() log an error,
drop dev_err() call that is made on nmk_gpio_populate_chip() failure.
Current boot log:
[ 0.544230] nomadik-gpio 1400000.gpio: failed getting reset control: -EPROBE_DEFER
[ 0.544274] nomadik-gpio 1400000.gpio: could not populate nmk chip struct
The second line is always redundant (or is logged when we shouldn't log,
like ioremap or alloc failures).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260701-gpio-nomadik-silent-v1-3-644d10316cef@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
All error paths of nmk_gpio_populate_chip() lead to logging errors but
this one (ignoring the alloc or ioremap failures that must not log).
Add the single missing dev_err() call.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260701-gpio-nomadik-silent-v1-2-644d10316cef@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Remove duplicate teardown code that is found in all error if
statements. Replace by goto-based cleanup labels.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260701-gpio-nomadik-silent-v1-1-644d10316cef@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Sang-Heon Jeon <ekffu200098@gmail.com> says:
Every existing numa_add_memblk() caller passes a valid node id and
separately marks that node in numa_nodes_parsed with node_set(). In
addition, numa_nodemask_from_meminfo() recomputes the same "nodes that own
memory" set from numa_meminfo, which numa_nodes_parsed already contains.
This redundancy implicitly depends on the callers' node_set(). So, before
removing the redundancy, make numa_add_memblk() set the node in
numa_nodes_parsed explicitly. Then remove the per-caller node_set() and
numa_nodemask_from_meminfo().
Also, since the generic numa_register_meminfo() already sets
node_possible_map to numa_nodes_parsed, remove the duplicate assignment in
arch_numa's numa_register_nodes().
patches from https://patch.msgid.link/20260703041329.2797584-1-ekffu200098@gmail.com:
mm: numa_memblks: set numa_nodes_parsed in numa_add_memblk()
ACPI: NUMA: remove redundant numa_nodes_parsed node_set()
of/numa: remove redundant numa_nodes_parsed node_set()
x86/numa: remove redundant numa_nodes_parsed node_set()
arch_numa: remove redundant numa_nodes_parsed node_set()
LoongArch: remove redundant numa_nodes_parsed node_set()
mm: numa_memblks: remove redundant numa_nodemask_from_meminfo()
arch_numa: remove redundant node_possible_map assignment
mm: numa_memblks: use numa_add_reserved_memblk() in numa_cleanup_meminfo()
Link: https://patch.msgid.link/20260703041329.2797584-1-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_cleanup_meminfo() calls the internal numa_add_memblk_to() to add a
block to numa_reserved_meminfo, even though numa_add_reserved_memblk() wraps
exactly that.
Use the wrapper instead, so numa_add_memblk_to() is reached only through its
two wrappers.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-10-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_register_meminfo() sets node_possible_map to numa_nodes_parsed. The
later assignment in numa_register_nodes() is therefore redundant, so remove
it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-9-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets each added node in numa_nodes_parsed, so
numa_nodes_parsed already contains every node that owns memory. The nodes
numa_nodemask_from_meminfo() adds from numa_meminfo are already set, so the
calls in numa_alloc_distance() and numa_register_meminfo() are redundant.
So remove both call sites and the unused function itself.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-8-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-7-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-6-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-5-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260703041329.2797584-4-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-3-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Every existing numa_add_memblk() caller separately marks the new node in
numa_nodes_parsed with node_set(). Set the node in numa_add_memblk() itself
on a successful add, so this no longer depends on each caller.
numa_add_memblk_to() now returns -EINVAL for an out-of-range node id, so a
zero return implies @nid was valid. No caller passes an invalid one, so
existing callers are unaffected.
The per-caller node_set() calls are removed in later patches.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-2-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpGs+4ACgkQJNaLcl1U
h9ACNwf/Tn088OJahzUFoky3ZZo/BYIf+Fg0Dsc4rhYZxxuolL8ahW5505KXsNt/
zqAViW+Stk+CcYRnMHHUcUvU9QNo5m7rG2L6fi5vxR5TckFNktIi21HgR12vmRE2
vQB6Oxwf2wHJogrtNplA1BUTz+3f3pho3yXu/7dDN+rARHnXxS31/mGStzRP2dhO
xl74IQ0Gg+7vCOHkmH2LTKOmZMxUFOfSriejyTNqNiUbZrufeCpA6u64ply05wD+
Hawc5hg1qaTykIGvr+cvZyav2Z8lvQmiDAcCp19bp4sk3HPo15U1ZdeqdVFkBXjK
B+OfMgQZrN5b3sIA7vhj9ztDT/RSmA==
=aubo
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem details
is that even when touching an obscure device id struct most of the
kernel needs to be recompiled. Given that each driver typically only
needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers. There are still a few instances left, but the ones
with high impact (that is in headers that are used a lot) and the easy
ones (.c files) are handled. These remaining includes will be addressed
during the next merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpHSvIACgkQj4D7WH0S
/k6Rdgf/QqxMIt7DEAN6KvyCnwVnNnvEWQhac/DtYA3NF1JaynieJIoFcimrRr/j
cntxjz2zlMhLH4CYZ87IunZ7nGZgkMlsnl/OVMm5NY0wq0vVYX6VmpiSvhMAgvjV
QxKHOAyuVqPslwVE8DF2Vh9mgJILviH5t/yIy8DHF85QBrDSjcd/n6csx09uTjIy
+D6NuxQ7ZeOi+O2wZuiDhYpD1kwgO1sXAg56ogN1OSTQoo1kkKqj66b5fgbPVm4/
MX3EBOjKIytX8csfWBJjNSB7aRyWVMkMKmmDO9+7MIq6tPRbc3yYwhu2kZBAw5Pt
mQfy1oyUi+0jwew4yKHeoVLyWAc4bg==
=YhFg
-----END PGP SIGNATURE-----
Merge tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull mod_devicetable.h header split from Uwe Kleine-König:
"Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed.
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260630071625.349996-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading.
Fixes: 904813cd8a ("[PATCH] USB: usbnet (4/9) module for net1080 cables")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260630045121.1565324-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add getcwd() for getting the current working directory.
The behaviour matches what musl is doing except for one
important difference: If the passed buf is NULL musl (and glibc)
uses a big buffer on the stack and that is then strdup()'d and
returned.
According to the man page for getcwd() this is a glibc extension
and I don't think we need it in nolibc.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260702085101.3304547-2-daniel@thingy.jp
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
- Quirk the Phison PS3111-S11 SSD with NOLPM due to its defective link
power management (Bryam).
- Strengthen checks on a device concurrent positioning range
information to make sure to reject any invalid report (Bryam).
- Fix probe error handling in the pata_pxa and sata_gemini drivers
(Myeonghun, Wentao).
- Limit buffer size of replies from translated commands to what libata
actually generated (Karuna)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCakc/rAAKCRDdoc3SxdoY
dp4BAQC5DDPG9r9/fitNLy+Sm8lJtFMhjd2JTY405ZghCNUoOQD+KaBwFmK7/rny
QuD0UtF9SV4swbQka2n83ZGCTLmIrgA=
=x7nY
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Quirk the Phison PS3111-S11 SSD with NOLPM due to its defective
link power management (Bryam)
- Strengthen checks on a device concurrent positioning range
information to make sure to reject any invalid report (Bryam)
- Fix probe error handling in the pata_pxa and sata_gemini
drivers (Myeonghun, Wentao)
- Limit buffer size of replies from translated commands to what
libata actually generated (Karuna)
* tag 'ata-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: limit simulated SCSI command copy to response length
ata: pata_pxa: Fix DMA channel leak on probe error
ata: sata_gemini: unwind clocks on IDE pinctrl errors
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a1 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Currently <linux/compiler.h> isn't included at all (not even
transitively) in <asm/ptrace.h>.
arch/parisc/kernel/asm-offsets.c just happens to include the following
chain of includes before <asm/ptrace.h>:
<linux/sched.h>
-> <asm/processor.h>
-> <asm/hardware.h>
-> <linux/mod_devicetable.h>
-> <linux/uuid.h>
-> <linux/string.h>
-> <linux/compiler.h>
. That chain will be broken, because in one of the next commits
<asm/hardware.h> is changed to only include <linux/device-id/parisc.h>
instead of <linux/mod_devicetable.h>. So to ensure
arch/parisc/kernel/asm-offsets.c knows about unlikely() even after that
change, #include <linux/compiler.h> explicitly.
Link: https://patch.msgid.link/0574a2b73363c3cbf21c55c27455c3cecfb33583.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct usb_device_id. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
drivers/media/usb/em28xx/em28xx.h via:
drivers/media/usb/em28xx/em28xx.h ->
<linux/i2c.h> ->
<linux/acpi.h> ->
<linux/device.h> ->
<linux/device/driver.h> ->
<linux/mod_devicetable.h
To keep struct usb_device_id available once <linux/device/driver.h>
stops including <linux/mod_devicetable.h>, include it the header
providing that struct explictly.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/e72de5b4b9f1aa77a3c19a5e698a195dfd81ae0b.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct cpu_features. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
arch/loongarch/kvm/main.c via:
arch/loongarch/kvm/main.c ->
<linux/kvm_host.h> ->
<linux/entry-virt.h> ->
<linux/resume_user_mode.h> ->
<linux/memcontrol.h> ->
<linux/cgroup.h> ->
<linux/kernel_stat.h> ->
<linux/interrupt.h> ->
<linux/hardirq> ->
<asm/hardirq.h> ->
<linux/irq.h> ->
<asm/irq.h> ->
<linux/irqdomain.h> ->
<linux/of.h> ->
<linux/mod_devicetable.h>
To keep struct cpu_features available once <linux/of.h> stops including
<linux/mod_devicetable.h>, include it here explicitly.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/052feec0e04ea8f5b2706a19a5b236679eed0aba.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Traditionally all *_device_id were defined in a single header
<linux/mod_devicetable.h>. This was split now with the objective that
only the relevant bits are included. So including <linux/pci.h> won't be
enough to get a definition of (the unrelated to pci) struct
hda_device_id.
Add an explicit include for the header defining struct hda_device_id to
keep working when <linux/pci.h> stops providing this defintion.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/376883bc5889d5cca01efb6f8d4e07a20158f2b8.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Up to now <linux/acpi.h> includes <linux/mod_devicetable.h> that
provides struct pci_device_id. However <linux/mod_devicetable.h> was
split into per bus headers and <linux/acpi.h> will only include the acpi
related one (and similar for other bus headers).
As struct pci_device_id is used in drivers/usb/dwc2/core.h, add an
include to ensure it's defined also after the includes in <linux/acpi.h>
are tightened.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/bddfcdfaf36d735c244e03efada6083ef98ebd51.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Currently <linux/mod_devicetable.h> is included transitively in
int3472.h via
<linux/clk-provider.h> ->
<linux/of.h> ->
<linux/mod_devicetable.h>
However these includes will be tightend such that only the bits relevant
for of will be provided by <linux/of.h>. To ensure that dmi_system_id
stays around, include the respective header explicitly.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/0ba52730f67dc995d9d896b81fa6a7320bf8cb4b.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Currently <linux/i2c.h> includes <linux/mod_devicetable.h> transitively
which ensures that struct dmi_system_id is defined in
drivers/platform/x86/x86-android-tablets/x86-android-tablets.h. However
this include in <linux/i2c.h> will be replaced by one for i2c_device_id
only. To ensure that dmi_system_id is available add the include for that
explicitly.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/32928d9ee47cefc7dfc4c385c06bd5e598b0fca1.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The subsystem private header i2c-core.h uses several symbols defined in
<linux/i2c.h>, e.g. struct i2c_board_info and i2c_lock_bus()). This
doesn't pose a problem in practise because all files including
"i2c-core.h" also include <linux/i2c.h>.
To make this more robust add an include statement for <linux/i2c.h>
making the header self-contained.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/46aa85ab3dc4e63bfb5bd8ff1fd212a3d0e31f58.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
<linux/of_platform.h> uses resource_size_t and relies on the transitive
include <linux/mod_devicetable.h> -> <linux/types.h>. It also uses error
constants and thus relying on the include chain
<linux/mod_devicetable.h> -> <linux/uuid.h> -> <linux/string.h> ->
<linux/err.h>.
With the plan to split <linux/mod_devicetable.h> per subsystem and then
only letting of_platform.h include the of-specific bits (which don't
require these two headers), add the needed includes explicitly to keep
the header self-contained.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/a730991bc8813cf70c2445064ea425291538f709.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Currently <linux/acpi.h> includes <linux/mod_devicetable.h> and thus
dmi_system_id is available for the driver. To disentangle includes
<linux/acpi.h> will be changed to only include the header for
acpi_device_id instead of the full <linux/mod_devicetable.h>. To prepare
for that include the dedicated header for struct dmi_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/600c7ab3263dcb8cee39b43dbd313eba8abef376.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
All consumers of the latter also include the former, but without that
struct usb_driver and struct usb_device_id (and maybe more) are not
defined. Add an include for <linux/usb.h> to make the header
self-contained.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/82219ab65d16ee5bfe5a35d11bc938baac3fd3bc.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Platform drivers can define an array containing the supported device
variants to be assigned to the struct platform_driver's .id_table.
While a forward declaration of struct platform_device_id is technically
enough to make the driver self-contained, it's reasonable to provide the
(very lightweight) data type definition for that array in
<linux/platform_device.h> to not add that burden to all platform drivers
with an id-table.
Note that currently <linux/device.h> transitively includes
<linux/mod_devicetable.h> that provides struct platform_device_id. But
that include is planned to be replaced by a tighter set of includes that
only define the structures relevant for the stuff in <linux/device.h>.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/4ca29592c9d1c6d528a65e05b80af7355f3c79c5.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
struct device_driver contains pointers of type struct of_device_id* and
struct acpi_device_id* but doesn't ensure these are defined. To make the
header self-contained add the (very lightweight) includes that contain
the respective definitions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199ba71b4ac73f4b4d9f5d2be635c96eec73c70e.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The driver uses several symbols and structs defined in that header. The
header is currently included transitively via
"vip.h" ->
<media/v4l2-ctrls.h> ->
<media/media-request.h> ->
<media/media-device.h> ->
<linux/platform_device.h>
which seems to be on the lower end of the scale between random and
reliable.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/9f2e0e001eec087f00ac2c5af2de2e8f6d0978c1.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result is that even when touching an obscure device id struct most
of the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
Implement the first step and define each device id struct in a separate
header (together with its associated #defines).
<linux/mod_devicetable.h> is modified to include all the new headers to
continue to provide the same symbols.
Several headers currently include <linux/mod_devicetable.h>, those that
are most lukrative to include only their subsystem headers only are:
$ git -C source grep -l mod_devicetable.h include/linux | while read h; do echo -n "$h:"; find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l $h | wc -l; done | sort -t: -k2 -n -r | head
include/linux/of.h:10897
include/linux/pci.h:7920
include/linux/acpi.h:7097
include/linux/i2c.h:5402
include/linux/spi/spi.h:1897
include/linux/dmi.h:1643
include/linux/usb.h:1222
include/linux/input.h:1205
include/linux/mdio.h:835
include/linux/phy.h:733
struct cpu_feature isn't really a device_id struct. That is kept in
<linux/mod_devicetable.h> for now.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # zorro
Link: https://patch.msgid.link/41400e323be8640702b906d04327e833c5bdaf4a.1782808461.git.u.kleine-koenig@baylibre.com
[Drop "MOD" from the header guards]
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The function ata_scsi_rbuf_fill() is used to copy the response of
emulated SCSI commands from ata_scsi_rbuf to the SCSI command's
scatterlist.
Currently, sg_copy_from_buffer() is called with the size argument
set to ATA_SCSI_RBUF_SIZE (2048 bytes). Since ata_scsi_rbuf is
zeroed out before the simulation actor is invoked, copying the
full buffer size causes the remainder of the SCSI command's
transfer buffer (beyond the actual response length 'len') to be
overwritten with zeroes. This clobbers any pre-existing sentinel
values or data in the caller's buffer tail, even though the
correct residual count is reported via scsi_set_resid().
Fix this by passing the actual response length 'len' as the copy
size to sg_copy_from_buffer(), ensuring that the tail of the
caller's buffer remains untouched. Also, add a defensive check
to ensure that the actor does not return a length exceeding the
static buffer capacity. If this occurs, trigger a WARN_ON(),
fail the command with an aborted command error, and return
immediately without copying any data.
The fix was tested by invoking an SCSI SG_IO INQUIRY on
an ATA disk on vanilla build, and build with the fix. Confirmed
that the input buffer's tail end remains unmodified with the fix.
Fixes: 5251ae224d ("ata: libata-scsi: Return residual for emulated SCSI commands")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Karuna Ramkumar <rkaruna@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
When dmaengine_slave_config() fails, the DMA channel acquired by
dma_request_chan() is not released before returning the error,
leaking the channel reference.
Fix by adding dma_release_channel() in the error path.
The ata_host_activate() error path already correctly releases the
DMA channel.
Cc: stable@vger.kernel.org
Fixes: 88622d80af ("ata: pata_pxa: dmaengine conversion")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then
disables them again while keeping the clocks prepared for later bridge
start and stop operations. If gemini_setup_ide_pins() fails after that,
gemini_sata_probe() returns directly and skips the existing
out_unprep_clk unwind path.
Route the IDE pinctrl failure through out_unprep_clk so the clocks
prepared by gemini_sata_bridge_init() are unprepared before probe
fails.
Fixes: d872ced29d ("ata: sata_gemini: Introduce explicit IDE pin control")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Fixes: c745dfc541 ("libata: fix reading concurrent positioning ranges log")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
