The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus
after entering Device-Initiated Slumber during idle. With the default
med_power_with_dipm policy the link goes down (SStatus 1 SControl 300)
and does not recover, forcing the filesystem read-only. Forcing
max_performance keeps the link stable across prolonged idle.
Add a NOLPM quirk so link power management is disabled for this drive
specifically, leaving it intact for other devices on the host.
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length.
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20260702082745.1014968-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
- Initialize task local storage before fork bails out to
free the task (Jann Horn)
- Fix insn_aux_data leak on verifier error path (KaFai Wan)
- Reject BPF inode storage map creation when BPF LSM is
uninitialized (Matt Bobrowski)
- Mask pseudo pointer values in verifier logs when pointer
leaks are not allowed (Nuoqi Gui)
- Harden BPF JIT against spraying via IBPB flush (Pawan Gupta)
- Reject a skb-modifying SK_SKB stream parser since the latter
is only meant to measure the next message (Sechang Lim)
- Fix bpf_refcount_acquire to reject refcounted allocation
arguments with a non-zero fixed offset (Yiyang Chen)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCaka0NhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIMPywD/ePh+eOZjFwXy88kOdNa2qmKLuTQm
nv6jPDOEafVDfbUA/R0qT9t+144K5Ig1NU58uR9vMIevqWRjLrnQtWU7KI0D
=4aKP
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Initialize task local storage before fork bails out to free the task
(Jann Horn)
- Fix insn_aux_data leak on verifier error path (KaFai Wan)
- Reject BPF inode storage map creation when BPF LSM is uninitialized
(Matt Bobrowski)
- Mask pseudo pointer values in verifier logs when pointer leaks are
not allowed (Nuoqi Gui)
- Harden BPF JIT against spraying via IBPB flush (Pawan Gupta)
- Reject a skb-modifying SK_SKB stream parser since the latter is only
meant to measure the next message (Sechang Lim)
- Fix bpf_refcount_acquire to reject refcounted allocation arguments
with a non-zero fixed offset (Yiyang Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Prefer dirty packs for eBPF allocations
bpf: Prefer packs that won't trigger an IBPB flush on allocation
bpf: Skip redundant IBPB in pack allocator
bpf: Restrict JIT predictor flush to cBPF
x86/bugs: Enable IBPB flush on BPF JIT allocation
bpf: Support for hardening against JIT spraying
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
bpf,fork: wipe ->bpf_storage before bailouts that access it
bpf: Fix insn_aux_data leak on verifier err_free_env path
selftests/bpf: Cover pseudo-BTF ksym log masking
bpf: Mask pseudo pointer values in verifier logs
selftests/bpf: Cover refcount acquire node offsets
bpf: Reject offset refcount acquire arguments
selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser
bpf, sockmap: reject a packet-modifying SK_SKB stream parser
selftests/bpf: don't modify the skb in the strparser parser prog
- Fix racy bitfield updates in vfio-pci-core and the mlx5 vfio-pci
variant driver with a binary split between setup/release and
runtime modified flags. These were noted across several Sashiko
reviews as pre-existing issues. (Alex Williamson)
- Fix runtime PM inconsistency where the vfio-pci driver module_init
could modify the idle PM policy of existing devices through globals
managed in vfio-pci-core, leading to unbalanced runtime PM
operations. (Alex Williamson)
- Restore mutability of writable vfio-pci module options by further
pulling policy globals out of vfio-pci-core, to instead be latched
per device at device init. Provide visibility of the per device
latched values through debugfs. (Alex Williamson)
- Fix missing VGA arbiter uninit callback in unwind path.
(Alex Williamson)
- Reorder device debugfs removal before device_del() to avoid gap
where debugfs is available with stale devres pointers.
(Alex Williamson)
- Move UUID library linking flag from vfio selftest Makefile into
libvfio.mk to avoid exposing such dependencies when linking with
KVM selftests. (Sean Christopherson)
-----BEGIN PGP SIGNATURE-----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=V/L3
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Mostly straightforward fixes here, inconsistent runtime PM handling
due to global device policies, bitfield races, unwind path gaps,
teardown ordering, and a misplaced library flag.
- Fix racy bitfield updates in vfio-pci-core and the mlx5 vfio-pci
variant driver with a binary split between setup/release and
runtime modified flags. These were noted across several Sashiko
reviews as pre-existing issues (Alex Williamson)
- Fix runtime PM inconsistency where the vfio-pci driver module_init
could modify the idle PM policy of existing devices through globals
managed in vfio-pci-core, leading to unbalanced runtime PM
operations (Alex Williamson)
- Restore mutability of writable vfio-pci module options by further
pulling policy globals out of vfio-pci-core, to instead be latched
per device at device init. Provide visibility of the per device
latched values through debugfs (Alex Williamson)
- Fix missing VGA arbiter uninit callback in unwind path (Alex
Williamson)
- Reorder device debugfs removal before device_del() to avoid gap
where debugfs is available with stale devres pointers (Alex
Williamson)
- Move UUID library linking flag from vfio selftest Makefile into
libvfio.mk to avoid exposing such dependencies when linking with
KVM selftests (Sean Christopherson)"
* tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Add luuid to libvfio.mk's list of libraries, not to the Makefile
vfio/pci: Expose latched module parameter policy in debugfs
vfio: Remove device debugfs before releasing devres
vfio/pci: Latch all module parameters per device
vfio/mlx5: Fix racy bitfields and tighten struct layout
vfio/pci: Fix racy bitfields and tighten struct layout
vfio/pci: Release the VGA arbiter client on register_device() failure
vfio/pci: Latch disable_idle_d3 per device
Syzbot reported list corruption caused by a double list_add_tail() call on
bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers().
Analysis revealed that the root cause was the insertion of a page/folio
with a page index of ULONG_MAX into the page cache via the GC ioctl.
filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(),
repeatedly detects a dirty folio with a page index of ULONG_MAX due to
index wrap-around, leading to duplicate processing of dirty buffers.
As a preparatory step, the GC ioctl loads the page/folio of the block to
be moved during GC and inserts it into the page cache based on information
in the nilfs_vdesc structure passed as an argument. Normally, this does
not cause issues because the user-space GC library configures the
nilfs_vdesc structure properly. However, since there is no range check on
the parameters determining the page index, a request with artificially
crafted parameters -- such as those generated by Syzbot -- can result in a
page/folio being inserted with a page index of ULONG_MAX, triggering the
above problem.
This resolves the issue by checking the ranges of 'vd_offset' and
'vd_vblocknr' in the nilfs_vdesc structure that determine the page index,
thereby preventing the invalid page/folio insertions.
Reported-by: syzbot+c37bed40868932d790e9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c37bed40868932d790e9
Fixes: 7942b919f7 ("nilfs2: ioctl operations")
Cc: wuyankun <wuyankun@uniontech.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
- Fix potential null pointer dereference in dma-buf.
- Handle 0 in dma_fence_dedup_array.
- Use the correct callback in dma_fence_timeline_name.
- Fix device removal handling in amdxdna.
- kernel-doc fixes.
- Include header fix for drm_ras.h
- Handle edids better in virtio.
- Use the clk_bulk api for error handling in malidp.
- More clk handling fixes for komeda.
- panthor scheduler block fallout fixes.
- panthor unplug fixes.
- other panthor fixes.
- Fix unnecessary WARN_ON in topology probe after teardown.
- Add refcount to amdxdna job to fix use-after free.
- Fix increasing args->size in ioctl's of drm/imagination.
- Handle stride correctly in pvr_set_uobj_array.
- Only call imagination's drm_sched_entity_fini once.
-----BEGIN PGP SIGNATURE-----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=heUt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc2:
- Fix potential null pointer dereference in dma-buf.
- Handle 0 in dma_fence_dedup_array.
- Use the correct callback in dma_fence_timeline_name.
- Fix device removal handling in amdxdna.
- kernel-doc fixes.
- Include header fix for drm_ras.h
- Handle edids better in virtio.
- Use the clk_bulk api for error handling in malidp.
- More clk handling fixes for komeda.
- panthor scheduler block fallout fixes.
- panthor unplug fixes.
- other panthor fixes.
- Fix unnecessary WARN_ON in topology probe after teardown.
- Add refcount to amdxdna job to fix use-after free.
- Fix increasing args->size in ioctl's of drm/imagination.
- Handle stride correctly in pvr_set_uobj_array.
- Only call imagination's drm_sched_entity_fini once.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/786bdc92-0ce3-4c0f-9668-b0fa8a0047ea@linux.intel.com
- Wedge from the timeout handler only after releasing the queue (Rodrigo)
- Fix a NULL pointer dereference (Francois)
- Remove redundant exec_queue_suspended (Lu)
- RTP / OA whitelist fixes (Ashutosh, Gustavo, Thomas)
- Return error on non-migratable faults requiring devmem (Matt Brost)
- Skip FORCE_WC and vm_bound check for external dma-bufs (Matt Auld)
- Hold notifier lock for write on inject test path (Shuicheng)
- Drop bogus static from finish in force_invalidate (Shuicheng)
- Fix double-free of managed BO in error path (Shuicheng)
- Don't attempt to process FAST_REQ or EVENT relays (Michal)
- Fix NPD in bo_meminfo (Matthew Auld)
- Prevent invalid cursor access for purged BOs (Matthew Auld)
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG (Ashutosh)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCakZ+rgAKCRC4FpNVCsYG
v4rdAQDvkckFMQCZ04RHhJk3SDR4hkPU3rjSHRkaujMCIBdBVAD7BfNkWzeNE+ht
xn5jI7MPDtdyLu7MQtWoqzA7rTwAdgM=
=soS7
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Wedge from the timeout handler only after releasing the queue (Rodrigo)
- Fix a NULL pointer dereference (Francois)
- Remove redundant exec_queue_suspended (Lu)
- RTP / OA whitelist fixes (Ashutosh, Gustavo, Thomas)
- Return error on non-migratable faults requiring devmem (Matt Brost)
- Skip FORCE_WC and vm_bound check for external dma-bufs (Matt Auld)
- Hold notifier lock for write on inject test path (Shuicheng)
- Drop bogus static from finish in force_invalidate (Shuicheng)
- Fix double-free of managed BO in error path (Shuicheng)
- Don't attempt to process FAST_REQ or EVENT relays (Michal)
- Fix NPD in bo_meminfo (Matthew Auld)
- Prevent invalid cursor access for purged BOs (Matthew Auld)
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG (Ashutosh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/akZ_UbrL94G4F2iA@fedora
Building the rseq selftests against musl libc fails because musl's
<features.h> does not provide the glibc-specific __GNUC_PREREQ macro:
error: missing binary operator before token '('
Replace __GNUC_PREREQ(11, 1) with an equivalent check using __GNUC__
and __GNUC_MINOR__ directly. This pattern is portable across all C
library implementations and is already used elsewhere in the tools/
tree (e.g., tools/include/linux/string.h).
This also allows removing the #include <features.h>, which was only
needed for __GNUC_PREREQ.
Fixes: 886ddfba93 ("selftests/rseq: Introduce thread pointer getters")
Signed-off-by: Hisam Mehboob <hisamshar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260618193724.589113-2-hisamshar@gmail.com
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes six arguments. A small
PTRACE_SYSCALL reproducer opens a file and maps one page with:
mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0)
Before the fix, the traced child fails the mmap and exits with 12.
After the fix, the mapping succeeds and the child exits with 0.
Fix the trace path by loading a4/a5 from pt_regs before changing sp.
Tested on: ck860f, linux-4.19.15, C-SKY abiv2
Fixes: e0bbb53843 ("csky: Fixup abiv2 syscall_trace break a4 & a5")
Suggested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Hanlin Song <pgeorge8929@gmail.com>
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Call trace:
ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P)
ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k]
ath11k_core_restart+0x40/0x168 [ath11k]
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1
Fixes: 6fe62a8cec ("wifi: ath11k: Add cold boot calibration support on WCN6750")
Signed-off-by: Gaole Zhang <gaole.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609090609.4041009-1-gaole.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
Fixes: bdcd817079 ("Add ath6kl cleaned up driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206185207.30098-1-git@danielhodges.dev
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath9k_hif_request_firmware() re-arms an asynchronous firmware load via
request_firmware_nowait(), passing hif_dev as the completion context, and
then still dereferences hif_dev:
dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n",
hif_dev->fw_name);
The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events"
workqueue and, when the firmware is missing, walks the retry chain into
ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That
releases the wait_for_completion(&hif_dev->fw_done) in a concurrent
ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing
dev_info() in the frame that re-armed the request can therefore read freed
memory (hif_dev->udev, the first field of struct hif_device_usb):
BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware
Read of size 8 ... by task kworker/...
ath9k_hif_request_firmware
ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247
request_firmware_work_func
Allocated by ...:
ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c
Freed by ...:
ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c
The fw_done barrier only makes disconnect wait for the firmware chain to
*terminate*; it does not protect the outer ath9k_hif_request_firmware()
frame that re-armed the request and keeps touching hif_dev afterwards.
Drop the post-request dev_info(): it is the only use of hif_dev after the
async request is armed, and it is purely informational (the dev_err() on the
failure path runs only when request_firmware_nowait() did not arm a callback,
so hif_dev is still alive there).
This was first reported by syzbot as a single, non-reproduced crash that was
later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer,
which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc
device whose firmware download fails). The vulnerable code is unchanged and
still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN
once the (sub-microsecond) race window is widened.
Fixes: e904cf6fe2 ("ath9k_htc: introduce support for different fw versions")
Reported-by: syzbot+50122cbc2874b1eb25b0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=50122cbc2874b1eb25b0
Signed-off-by: Cheng Yongkang <teel4res@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260605153210.20471-1-1020691186@qq.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix "concelable" -> "cancelable" in the comment above
io_uring_cmd_mark_cancelable(), and fix the memory ordering comment
in __io_uring_cmd_done() to reference io_do_iopoll() and
->iopoll_completed.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260702082937.3707134-3-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit cited below should not have been merged. It attemted to fix an
existing problem ansd thereby introduced new problems by keeping the
pi_state in state Q_REQUEUE_PI_IN_PROGRESS and leaking it.
Based on the commit description the intention was to handle the case
when task_blocks_on_rt_mutex() returns -EDEADLK and the following
remove_waiter() dereferences the NULL pointer in waiter->task.
That is already handled by Davidlohr in commit 40a25d59e8
("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued") and
requires no further acting.
Revert the commit breaking the "waiter == owner" case again.
Fixes: 74e144274a ("futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260701131150.0Ijhq4Dw@linutronix.de
Closes: https://lore.kernel.org/all/20260629020049.2082397-1-michael.bommarito@gmail.com
The RB5gen2 is an embedded development platform for the
QCS8550, based on the Snapdragon 8 Gen 2 SoC (SM8550).
This change implements the main board, the vision mezzanine
will be supported in a follow up patch.
The main board has the following features:
- Qualcomm Dragonwing QCS8550 SoC
- Adreno GPU 740
- Spectra ISP
- Adreno VPU 8550
- Adreno DPU 1295
- 1 x 1GbE Ethernet (USB Ethernet)
- WIFI 7 + Bluetooth 5.4
- 1 x USB 2.0 Micro B (Debug)
- 1 x USB 3.0 Type C (ADB, DP out)
- 2 x USB 3.0 Type A
- 1 x HDMI 1.4 Type A
- 1 x DP 1.4 Type C
- 2 x WSA8845 Speaker amplifiers
- 2 x Speaker connectors
- 1 x On Board PDM MIC
- Accelerometer + Gyro Sensor
- 96Boards compatible low-speed and high-speed connectors [1]
- 7 x LED indicators (4 user, 2 radio, 1 power)
- Buttons for power, volume up/down, force USB boot
- 3 x Dip switches
On-Board PMICs:
- PMK8550 2.1
- PM8550 2.0
- PM8550VS 2.0 x4
- PM8550VE 2.0
- PM8550B 2.0
- PMR735D 2.0
- PM8010 1.1 x2
Product Page: [2]
[1] https://www.96boards.org/specifications/
[2] https://www.thundercomm.com/product/qualcomm-rb5-gen-2-development-kit
The default msi-map from sm8550.dtsi is deleted for both pcie0 and
pcie1. The QPS615 PCIe switch on each port exposes more than two
devices (1 USP + 3 DSPs), but Gunyah currently limits ITS device
mappings to two per root complex to save memory. With msi-map
present, the ITS MAPD command times out.
Deleting msi-map causes the DWC controller to fall back to its
internal iMSI-RX module, which handles MSIs without this limitation.
Signed-off-by: Joe Sandom <jsandom@axon.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-5-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move qcom,gsi-loader and memory-region properties from individual board
DTS files into the SoC DTSI, since these are common to all SM8550-based
boards.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-3-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add labels to the root port nodes (pcie0_port0, pcie1_port0) to
allow board DTS files to reference them for adding endpoint devices
to each pcie root port.
Update the pcieport0 reference to pcie0_port0 in sm8550-hdk.dts and
sm8550-qrd.dts to match the label rename in sm8550.dtsi.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-2-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the MHI register regions to the pcie0 and pcie1 controller nodes
to expose link power state transition counters (L0s/L1/L1.1/L1.2/L2)
via debugfs. The PCIe host driver uses this region to read the
link_transition_count from the MHI registers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-1-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an IMEM on glymur which falls back to mmio-sram and define the
PIL relocation info region as its child, for post mortem tools to
locate the loaded remoteprocs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur-imem-v5-2-18ede63cf063@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible for Qualcomm's glymur IMEM, a block of sram which
can fall back to mmio-sram.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur-imem-v5-1-18ede63cf063@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the mode-switch property to the QMP combo PHY so that mode-switch
events are routed to it, allowing the PHY to enter DisplayPort Alternate
Mode. Expand the DP data-lanes assignment from two to four lanes to make
use of the full link bandwidth available in this configuration.
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260420-kodiak_4k-v1-1-83dfc66b8f06@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable secondary USB controller in host mode on lemans EVK Platform.
Secondary USB controller is connected to a Genesys Logic USB HUB GL3590
having 4 ports. The ports of hub that are present on lemans EVK standalone
board are used as follows:-
1) port-1 is connected to HD3SS3220 Type-C port controller.
2) port-4 is used for the M.2 E key on corekit. Standard core kit uses UART
for Bluetooth. This port is to be used only if user optionally replaces the
WiFi card with the NFA765 chip which uses USB for Bluetooth.
Remaining 2 ports will become functional when the interface plus mezzanine
board is stacked on top of corekit:
3) port-2 is connected to another hub which is present on the mezz through
which 4 type-A ports are connected.
4) port-3 is used for the M.2 B key for a 5G card when the mezz is
connected.
Secondary USB Controller
↓
GL3590 USB Hub (4 ports)
|
|-- Port 1 → HD3SS3220 Type‑C Port Controller → USB‑C Connector
|
|-- Port 2 → Mezzanine USB Hub (when mezz attached)
|
|-- Port 3 → M.2 B‑Key Slot (when mezz attached)
|
|-- Port 4 → M.2 E‑Key Slot
(Default: BT via UART;
USB only if NFA765 module is installed)
Mark the second USB controller as host only capable and add the HD3SS3220
Type-C port controller along with Type-C connector for controlling vbus
supply.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406110113.1709886-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename the hd3ss3220_ instance to improve clarity and simplify usage when
adding a secondary port controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406110113.1709886-2-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Cypress USB Type-C controller and associated connector.
The controller is connected over I2C12 and wired to the USB1 DWC3.
The USB-C connector routes both high-speed and super-speed signals.
Enable dual-role data and power over the USB-C connector.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260421101606.411335-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the PWM block on IPQ9574.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-6-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the PWM block on IPQ5332.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-5-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the PWM block on IPQ5018.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-4-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the PWM block on IPQ6018.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-3-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IRQ_TYPE_xxx flags are not correct in the context of GPIO flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: IRQ_TYPE_LEVEL_LOW = 8 = GPIO_TRANSITORY.
Correct the touchscreen irq-gpios to use proper flags, assuming the
author of the code wanted similar logical behavior:
IRQ_TYPE_LEVEL_LOW => GPIO_ACTIVE_LOW
Fixes: e46b455e67 ("arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260413090527.53000-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the IMEM found on Milos, which contains pil-reloc-info
and the modem tables for IPA, among others.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410-milos-imem-v3-2-d215385fa5ab@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The batadv_skb_set_priority() receives an SKB with the inner ethernet
header at position "offset". When it tries to extract the IPv4 and IPv6
header, it needs to skip the ethernet header to get access to the IP
header.
But for VLAN header, it performs the access with the struct vlan_ethhdr.
This struct contains both both the ethernet header and the VLAN header. It
is therefore incorrect to skip over the whole vlan_ethhdr size to get
access to the vlan_ethhdr.
Cc: stable@vger.kernel.org
Fixes: c54f38c9aa ("batman-adv: set skb priority according to content")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The YY3588 is a single board computer based on the Rockchip RK3588.
Add devicetree binding documentation for it.
Signed-off-by: Daniele Briguglio <hello@superkali.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260610-yy3588-board-v1-2-4bb7176b6826@superkali.me
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the missing Broadcom Wi-Fi and Bluetooth child nodes for the
9Tripod X3568 v4 board.
The Bluetooth subnode is attached to uart8 with hardware flow control
enabled via RTS/CTS pins.
The Wi-Fi subnode is connected via the sdmmc2 bus.
Additionally, change the status of the i2s3_2ch node to "disabled"
since the required rk3568-codec-digital driver for Bluetooth audio
is currently unavailable in the mainline tree.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20260701185657.4092955-1-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
scu_supply is enabled alongside scu and scu_x2 during normal SRC
operation, but rsnd_src_suspend() and rsnd_src_resume() only disable
and re-enable scu and scu_x2. The supply clock is left enabled across
a system suspend and its prepare/enable refcount becomes unbalanced
after a suspend/resume cycle.
Disable scu_supply in rsnd_src_suspend() and re-enable it in
rsnd_src_resume() so the SRC clocks are managed consistently across
system PM transitions.
Fixes: ef19ecf042 ("ASoC: rsnd: Add system suspend/resume support")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260630175329.4145703-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'gpio' property for fixed regulators has been deprecated in favor
of the plural 'gpios' form according to the regulator-fixed binding.
Update the USB host and USB OTG fixed regulators for the 9Tripod X3568 v4
board to use the modern 'gpios' property to conform with current
devicetree binding standards.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20260701185657.4092955-2-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In max8998_pmic_dt_parse_pdata(), of_get_child_by_name() acquires a
reference on reg_np which is then stored in rdata->reg_node, transferring
ownership to the regulator data array. The subsequent of_node_put(reg_np)
at the end of the function releases the last matched regulator node's
reference, leaving rdata->reg_node as a dangling pointer for the last
entry.
Remove the spurious of_node_put(reg_np) call.
Cc: stable@vger.kernel.org
Fixes: 156f252857 ("drivers: regulator: add Maxim 8998 driver")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260626160326.54457-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list.
Fixes: f29dd55b02 ("rdma/siw: queue pair methods")
Link: https://patch.msgid.link/r/20260630060040.966461-1-ruoyuw560@gmail.com
Suggested-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put.
Cc: stable@vger.kernel.org
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260625113239.49764-1-vulab@iscas.ac.cn
In hns_roce_cleanup_mhop_hem_table(), the expression:
obj = i * buf_chunk_size / table->obj_size;
is evaluated using 32-bit unsigned arithmetic because
'buf_chunk_size' is u32 and the usual arithmetic conversions convert
'i' to unsigned int. The result is assigned to a u64 variable, but the
multiplication may overflow before the assignment.
For sufficiently large HEM tables, this produces an incorrect object
index passed to hns_roce_table_mhop_put().
Cast 'i' to u64 before the multiplication so that the intermediate
calculation is performed with 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Link: https://patch.msgid.link/r/20260627095951.51378-1-listdansp@mail.ru
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the zero CQE validation before rdma_zalloc_drv_obj() to avoid
leaking the CQ object when returning -EINVAL.
Fixes: a291758288 ("RDMA/core: Reject zero CQE count")
Link: https://patch.msgid.link/r/20260625020148.224537-1-zhaochenguang@kylinos.cn
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mana_ib_post_send() returns err after walking the send work request list.
If the caller passes an empty list, the loop is skipped and err is not
assigned.
Initialize err to 0 so an empty send work request list returns success
instead of stack data.
Fixes: c8017f5b48 ("RDMA/mana_ib: UD/GSI work requests")
Link: https://patch.msgid.link/r/20260618041752.481193-2-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
erdma_post_recv() returns ret after walking the receive work request list.
If the caller passes an empty list, the loop is skipped and ret is not
assigned.
Initialize ret to 0 so an empty receive work request list returns success
instead of stack data.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Link: https://patch.msgid.link/r/20260618041752.481193-1-ruoyuw560@gmail.com
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The Kconfig entry for the AD7779 is missing a
'select IIO_TRIGGERED_BUFFER' parameter, causing build failures.
Fixes: c9a3f8c7bf ("drivers: iio: adc: add support for ad777x family")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260617164013.280790-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Reviewed-by: David Hu <xuehaohu@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
