The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Override input device open() and close() callbacks to enable and disable
the force-feedback workqueue item synchronously.
When the input device is opened by userspace, call hid_hw_open() and
enable_work(). When it is closed, disable_work_sync() ensures that any
pending or running work item is cancelled/flushed and no further work
items can be scheduled.
In close(), zero out magnitudes and issue a final report to turn off the
rumble motors on the physical controller before shutting down transport
I/O.
Pack strong and weak magnitudes into a single u32 integer using
WRITE_ONCE() and READ_ONCE() for atomic, lockless updates.
This allows eliminating the manual 'removed' boolean flag and spinlock
completely.
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently initializes force-feedback in its probe() function
after calling hid_hw_start() with HID_CONNECT_DEFAULT. This is racy as
the input device is already registered and visible to userspace at that
point.
Move the FF initialization to the .input_configured() callback to ensure
the device is fully prepared before registration.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID drivers that rely on the HID core to register input devices must
ensure that all private data and capabilities (like force-feedback) are
fully initialized before registration.
When hid_hw_start() is called with HID_CONNECT_HIDINPUT, the input
device is registered immediately. This is racy if the driver attempts to
augment the input device in probe() after starting the hardware.
The correct way to handle this is to use the .input_configured()
callback.
Add documentation and a Coccinelle script to detect and prevent this
anti-pattern.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some HID drivers initialize their own force-feedback support within
their .input_configured() callback. In such cases, we should skip
the generic PID force-feedback initialization to avoid conflicts and
redundant setup.
Add hid_has_ff_input() helper and use it to check for existing FF
capabilities before calling hdev->ff_init().
Since we now have a dynamic way to detect if force-feedback is needed,
the HID_CONNECT_FF flag is redundant for conflict resolution and can
be ignored in the core initialization logic. Generic PID support will
now be attempted by default for any claimed input device that doesn't
already have FF capabilities.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Report whether an AMD convertible is in laptop or tablet mode using the
operating-mode sensor provided by the Sensor Fusion Hub, and expose it
to userspace as SW_TABLET_MODE, so userspace can react to the device
being folded into tablet posture.
Cc: Helge Bahmann <hcb@chaoticmind.net>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Register an auxiliary device when the operating-mode sensor is present,
so a dedicated input driver can bind to it and report the device
posture. This keeps the input handling out of the sensor transport
driver.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Allow other drivers to query the operating mode (laptop or tablet)
reported by the Sensor Fusion Hub. This is the interface used by the
tablet-mode switch driver to report the device posture to userspace.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The SFH accessors reach the device through a file-global emp2 pointer
that is published at probe and cleared on remove. amd_get_sfh_info() is
exported and called from other modules on unrelated threads, so a reader
can observe a non-NULL emp2 and then race a concurrent unbind that clears
it and frees the device.
Serialize the emp2 publish/clear and all readers under a mutex, so a
reader either sees a live device for the whole access or sees NULL.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The MP2 version is currently known only implicitly, from whether an ops
pointer was stored in the PCI driver_data. Subsequent changes need to
act on the MP2 version directly, for example to read the operating-mode
register only on confirmed MP2 v2.
Track the MP2 version explicitly so that version-specific behaviour can
be gated on it, and leave it unset for generations that do not require
such handling.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The controller has DTR support, a bit must be set for it. The behaviour
is interesting though, as the speed won't improve when enabled. This is
because there seems to be an internal divisor (/2) which keeps the rate
equal when DTR is enabled. As a result, this commit also doubles the
target bus speed, which in practice does not happen. This way, there is
a real gain:
Before:
$ flash_speed /dev/mtd0 -dc10
eraseblock write speed is 1000 KiB/s
[...]
eraseblock read speed is 1199 KiB/s
[...]
After:
$ flash_speed /dev/mtd0 -dc10
eraseblock write speed is 985 KiB/s
[...]
eraseblock read speed is 1540 KiB/s
[...]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-4-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller is capable of sending several bytes for the command, it
does not even know this is a command. Just mimic the address steps here
to allow double byte commands, which may be needed for DTR support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-3-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The speed setting is wrongly placed inside the "setup transfer" helper,
since the bus configuration may require the speed to be correct. Indeed,
DTR mode (not yet available) divides by 2 the bus clock when enabled. As
a result, to remain at a constant clock speed (and improve the data
rate), we must double the bus clock when enabling DTR. In order to
prepare for this change, move all the bus configuration required for
each step of the operation inside a unique helper called
nuvoton_qspi_configure_bus().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-2-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis.
Fixes: cc894ac553 ("HID: sony: support for ghlive ps3/wii u dongles")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The controller private data is already fetched at the start of
dw_spi_setup(). Drop the redundant inner declaration that shadows it.
Signed-off-by: Liang Hao <haohlliang@gmail.com>
Link: https://patch.msgid.link/20260814114235.31281-1-haohlliang@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
* for-next/selftests:
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
kselftest/arm64: Don't write to P0 in irritator on SME only systems
kselftest/arm64: Add testcase for SECCOMP_RET_TRACE orig_x0 bypass
kselftest/arm64: Add seccomp ptrace x0 bypass test
kselftest/arm64: fp-ptrace: Fix checks for inactive SVE and SSVE regsets
* for-next/sdei:
arm64: escalate smp_send_stop() to an SDEI NMI as a last resort
drivers/firmware: add SDEI cross-CPU NMI service for arm64
firmware: arm_sdei: add SDEI_EVENT_SIGNAL support
firmware: arm_sdei: add sdei_is_present()
* for-next/ptrace:
arm64: syscall: Pass 'orig_x0' as first argument to native system call
arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry
arm64/fpsimd: ptrace: Fix inactive SVE and SSVE regsets
* for-next/nmi:
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: entry: mask DAIF before returning from C EL1 handlers
arm64: suspend: Initialize PMR on resume
arm64: suspend: rely on daif helpers to handle PMR
arm64: hibernate: Restore DAIF state on error
arm64: hibernate: mask DAIF before restoring hibernated kernel
arm64: debug: don't mask DAIF for mdscr_write()
arm64: ptrace: Remove INIT_PSTATE_EL2
* for-next/mm:
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: mm: Unmap kernel data/bss entirely from the linear map
arm64: mm: fix accidental linear mapping of no-map reserved memory
arm64: pgtable: convert pte_present() from macro to static inline
arm64: mm: Treat all devices as dma-coherent when CLIDR_EL1.LoC == 0
* for-next/misc:
arm64: Disable KCSAN instrumentation in delay.o
MAINTAINERS: arm64: Add Mark Rutland as an official Reviewer
arm64: smp: Fix IPI teardown for GICv5 flow
arm64: futex: Consolidate 'old == new' check in __lsui_cmpxchg32()
arm64: ftrace: allow DIRECT_CALLS without CALL_OPS
arm64: ftrace: prepare ftrace_modify_call() for use without CALL_OPS
* for-next/coco:
arm64: RSI: fix field-spanning write warning in attestation token init
virt: arm-cca-guest: Drop unused assignment of platform_device_id driver data
arm64/coco: Add pKVM as a CC platform
arm64/mm: Simplify SWIOTLB setup in arch_mm_preinit()
virt: arm-cca-guest: use migrate_disable() for attestation token requests
- Fix DPT Allocation paths (Maarten)
- Fixes around UM queue BO (Jia)
- Order ring writes before ring tail updates (Matthew Brost)
- Add termination on resume for PXP (Daniele)
- Document Sentinel and make CTX_TIMESTAMP read TOCTOU-safe (Gajendra)
- Fix sync entry leak on OA config emit failure (Linmao Li)
- Check managed mutex initilization errors (Linmao Li)
- Fix min frequency setting (Vinay)
- Fix xe_device_probe error path (Raag)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCan4Y0QAKCRC4FpNVCsYG
vw4gAQD/56NgUmv0Rx3BsDCQhjCMb99DtTGbnEvhehmb6nJ0gQD/eBPPDmobVJYZ
P0pGk6B014FrmH+PDjD9Vo2EbswLFQE=
=ez0c
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2026-08-13' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix DPT Allocation paths (Maarten)
- Fixes around UM queue BO (Jia)
- Order ring writes before ring tail updates (Matthew Brost)
- Add termination on resume for PXP (Daniele)
- Document Sentinel and make CTX_TIMESTAMP read TOCTOU-safe (Gajendra)
- Fix sync entry leak on OA config emit failure (Linmao Li)
- Check managed mutex initilization errors (Linmao Li)
- Fix min frequency setting (Vinay)
- Fix xe_device_probe error path (Raag)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/an4ZogmPqP2Xtfx3@fedora
Add support for per-CCD temperature monitoring on Zen 5 Turin (EPYC 9005)
CPUs, as they fall into a separate model range with a different offset
and a higher maximum CCD count than their desktop counterparts. As such,
this patch also updates the driver to support CPUs with up to 16 CCDs.
Tested and working on an EPYC 9555P.
Signed-off-by: Gabriel Ford <gabriel@gford.dev>
Link: https://lore.kernel.org/r/20260813170232.3841-1-gabriel@gford.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Revert fair scheduler patches and mark fair policy as experimental due
to reported regressions.
- Fix OOB read in connector/hdmi infoframe.
- Handle invalid scaling parameters and empty messages in log target.
- Skip attempting to populate unmapped pages in amdxdna.
-----BEGIN PGP SIGNATURE-----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=Stgd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-08-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.3:
- Revert fair scheduler patches and mark fair policy as experimental due
to reported regressions.
- Fix OOB read in connector/hdmi infoframe.
- Handle invalid scaling parameters and empty messages in log target.
- Skip attempting to populate unmapped pages in amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/a9b38792-bdd0-42da-a46a-7a048c26c0c2@linux.intel.com
- Fix NULL pointer dereference when matching unloaded module wildcard event
The set_event can take events for modules that have not been loaded
yet. This is done by writing '<event>:mod:<module>'.
If '<event>' is not added, then it means to add all events in <module>.
This wildcard is represented by a NULL pointer. If one were to try to
remove the same module item with a named event it would cause a NULL
pointer dereference when comparing the NULL with the name in strcmp().
echo ':mod:kvm' > /sys/kernel/tracing/set_event
echo '!kvm_ack_irq:mod:kvm' >> /sys/kernel/tracing/set_event
The above will do a strcmp("kvm_ack_irq", NULL) and crash the kernel.
Test for NULL (wildcard) before doing the strcmp().
- Fix event data field race in loading two modules at the same time
When a module loads, its trace events get registered. The fields
of the events are also dynamically created and added to the events
fields list. It also will call a function that will look at all the
events for updates that need to be done. If two modules load at the
same time, the one that scans all events and their fields may read
the one being added as the scan doesn't take the event_mutex.
This may cause a data race.
Have the scan take the event_mutex to prevent the race.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCan438BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq6EAPwNoL0MQ5Yk+rRuWIwDj33FFd3Skwe6
DfqVdxVEzCDdzAEArW2usswnZRlOCZddZPUCVj0MWdNz2sVin3p/j0Qklgg=
=W3ej
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix NULL pointer dereference when matching unloaded module wildcard
event
The set_event can take events for modules that have not been loaded
yet. This is done by writing '<event>:mod:<module>'.
If '<event>' is not added, then it means to add all events in
<module>. This wildcard is represented by a NULL pointer. If one were
to try to remove the same module item with a named event it would
cause a NULL pointer dereference when comparing the NULL with the
name in strcmp().
echo ':mod:kvm' > /sys/kernel/tracing/set_event
echo '!kvm_ack_irq:mod:kvm' >> /sys/kernel/tracing/set_event
The above will do a strcmp("kvm_ack_irq", NULL) and crash the kernel.
Test for NULL (wildcard) before doing the strcmp().
- Fix event data field race in loading two modules at the same time
When a module loads, its trace events get registered. The fields of
the events are also dynamically created and added to the events
fields list. It also will call a function that will look at all the
events for updates that need to be done. If two modules load at the
same time, the one that scans all events and their fields may read
the one being added as the scan doesn't take the event_mutex. This
may cause a data race.
Have the scan take the event_mutex to prevent the race.
* tag 'trace-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race between update_event_fields and, event_define_fields
tracing: Fix NULL pointer dereference in module event cache removal
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem.
Cc: stable@vger.kernel.org
Fixes: b3bc8547d3 ("tracing: Have TRACE_DEFINE_ENUM affect trace event types as well")
Link: https://patch.msgid.link/2e5730d2-c631-da41-3a3a-ae35bb4895f3@allwinnertech.com
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A module-only event filter such as ":mod:foo" is cached with a NULL
event_mod->match when foo has not been loaded. If a later write tries to
remove a specific match from the same module, remove_cache_mod() passes
the NULL cached match to strcmp(), causing a NULL pointer dereference.
The issue can be reproduced from userspace:
echo ':mod:trace_events_kunit_missing' > /sys/kernel/tracing/set_event
echo '!foo_bar:mod:trace_events_kunit_missing' >> /sys/kernel/tracing/set_event
The second write must be a concatenation (">>") to not include O_TRUNC as
that would cause ftrace_clear_events() to clear the cached modules lines.
The crash was reproduced on x86_64 QEMU while KUnit workers contended on
the event tracing path:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:strcmp+0x10/0x30
Call Trace:
__ftrace_set_clr_event_nolock+0x373/0x4a0
ftrace_set_clr_event+0xf0/0x180
ftrace_event_write+0xdf/0x110
vfs_write+0xf6/0x440
ksys_write+0x68/0xe0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Check event_mod->match before comparing it, consistent with the existing
NULL checks for the cached system and event fields. The mismatched removal
continues to return -EINVAL; a broad cached module filter is removed with
"!:mod:<module>".
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260811173902.1927376-2-sh_def@163.com
Fixes: b355247df1 ("tracing: Cache \":mod:\" events for modules not loaded yet")
Reported-by: syzbot+4d3143c8e28f6266c636@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/6a7a6b7f.9c11d2ce.289b96.00f8.GAE@google.com/
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The man page for pkey_alloc(2) specifies that it should return -1 with
the errno set to ENOSPC when pkeys are not supported [1]. However, on
x86 pkey_alloc() sets errno to EINVAL when called for the first time
on a CPU that does not support pkeys.
The root cause of this is the x86 implementation of mm_pkey_alloc() not
directly checking if pkeys are supported. It only checks if all the
pkeys have been allocated by comparing the allocation map against
all_pkeys_mask. When OSPKE is not enabled, init_new_context() skips the
initialization of the allocation map, leaving it as 0, while
all_pkeys_mask is 1. mm_pkey_alloc() interprets this as there being a
pkey available and it returns pkey 0. Then, pkey_alloc() fails with
-EINVAL from arch_set_user_pkey_access() instead of returning -ENOSPC.
Subsequent calls to pkey_alloc() do return -ENOSPC because pkey 0 is
left marked as allocated.
Change mm_pkey_alloc() to directly check if OSPKE is enabled, and
return -1 if it is not, which causes pkey_alloc() to return -ENOSPC. The
arm64 and powerpc implementations of mm_pkey_alloc() already do this
check.
[1] https://man7.org/linux/man-pages/man2/pkey_alloc.2.html
[ dhansen: use arch_pkeys_enabled() to follow arm ]
Fixes: e8c24d3a23 ("x86/pkeys: Allocation/free syscalls")
Signed-off-by: Bijan Tabatabai <btabatabai@wisc.edu>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260716220604.26452-1-bijan311@gmail.com
virtio_spi_probe() registers the SPI controller with
devm_spi_register_controller(). spi_register_controller() binds a child
inline unless its driver has asked for asynchronous probing, so a
peripheral that performs a transfer during its own probe reaches
virtio_spi_transfer_one(), which kicks the virtqueue before probe has
returned.
The driver never calls virtio_device_ready(), so DRIVER_OK is set on its
behalf by virtio_dev_probe(), only once probe has returned. The virtio
spec is explicit about that ordering in 3.1 Device Initialization:
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
A device that waits for DRIVER_OK before servicing the queue therefore
leaves the transfer unanswered, and virtio_spi_transfer_one() waits for its
completion with no timeout, so probe never returns.
Mark the device ready before registering the controller, as done for the
same reason in commit f5866db64f ("virtio_console: enable VQs early") and
commit 1d774589f9 ("i2c: virtio: mark device ready before registering the
adapter").
Fixes: f98cabe3f6 ("SPI: Add virtio SPI driver")
Signed-off-by: Jasper Wise <jaspwise@amazon.co.uk>
Link: https://patch.msgid.link/20260813084618.613172-1-jaspwise@amazon.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The Armada timer init paths enable their clock before calling the
common initialization routine. If that routine returns an error, the
clock is left enabled even though the timer was not initialized
successfully.
Fixes: 12549e27c6 ("clocksource/drivers/time-armada-370-xp: Convert init function to return error")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260802213545.565913-1-dbgh9129@gmail.com
As it stands, the driver uses ioread32 and iowrite32 for register
access and it works fine. However this stops working when the
SWAP_IO_SPACE config is enabled as this drivers expects ioread32 and
iowrite32 to be in native endian (that is big endian for currently
supported SoCs). RTL9607C is a big endian MIPS SoC that has identical
timer as the already supported chips but needs to have SWAP_IO_SPACE
to have a functioning little endian USB host.
Fix this by replacing all instances of ioread32 and iowrite32 with
__raw_readl and __raw_writel variants. Since they essentially do the
same register access, this shouldn't affect anything on other
machines.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20260725175510.77240-1-adilov@disroot.org
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT.
Fixes: 7aac482e62 ("clocksource: samsung_pwm_timer: Make PWM spinlock global")
Fixes: f11899894c ("clocksource: add samsung pwm timer driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://patch.msgid.link/20260713085653.1145015-1-m.szyprowski@samsung.com
