Add CPU-to-DDR BWMON nodes and their corresponding opp tables for
Shikra SoC. This is necessary to enable power management and optimize
system performance from the perspective of dynamically changing DDR
frequencies.
Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-2-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree support for QUPv3 serial engine protocols on Shikra.
Shikra has 10 QUP serial engines under a single QUP wrapper, all with
support of GPI DMA engines.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-1-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Setting CCI supply clock rate to higher value of 37.5MHz allows to
program the controller to configure its I2C bus speed to Fast-mode plus.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260729112719.1151700-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the sound card on the Eliza CQS EVK platform, including the
WSA8845 external speaker path and DMIC microphone capture via VA macro.
Enable the required LPASS WSA macro, VA macro and SoundWire controller
along with the necessary pinctrl configurations for DMIC and WSA
SoundWire interfaces.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
defined inside the LPASS LPI pin controller node. The hardware is similar
to the SM8750 platform.
The SoundWire controller is kept disabled so board DTS files can
selectively enable and configure it.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the IMDT QCS8550 SBC which consists of an IMDT QCS8550 SoM
soldered onto an IMDT QCS8550 carrier board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: William Bright <william.bright@imd-tec.com>
Link: https://lore.kernel.org/r/20260723-imdt-qcs8550-sbc-rfc-v5-2-2fb988854623@imd-tec.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-20-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-19-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-18-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-17-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-16-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-15-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-14-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-12-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-11-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-10-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-9-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-8-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-7-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UX3607OA is a variant of the Asus Zenbook A16 built on the Qualcomm
Glymur platform. It comes with an 18-core X2 Elite Extreme SoC, 48GiB
of RAM, NVMe storage, a 2880 x 1800 OLED screen, and the other typical
Glymur platform capabilities.
The hardware wiring is very different versus the 14" SKU - the larger
one is based on the System-In-Package reference design, unlike the
smaller one, which derives from a more common Chip-On-Board base.
Currently working:
- Audio playback (4 speakers)
- GPU, Display
- HDMI port
- Keyboard, touchpad, lid switch
- Privacy LEDs (camera-use, camera-block, mic-mute)
- Charging, Type-C, Type-A port
- Onboard SD Card slot (RTS5329)
- Wi-Fi, Bluetooth (QCC2072)
- Touchscreen should work on the SKUs that have it, but it remains
untested due to lack of access to such a device
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-topic-a16_submission-v1-2-8ea213130d05@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 4559b435f7 ("arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch node for PCIe0")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-22-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 267643b3e3 ("arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-21-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 1cde54c54b ("arm64: dts: qcom: qcs6490: Add Thundercomm AI Mini PC G1 IoT")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-20-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: ef254b12ec ("arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-19-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: b64abb26a2 ("arm64: dts: qcom: lemans-evk: Add IFP Mezzanine")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-18-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 5a67924d2f ("arm64: dts: qcom: monaco-evk: Add IFP Mezzanine")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-17-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 5238f4e716 ("arm64: dts: qcom: Add Monaco Monza SoM")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-16-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 46a7c01e7e ("arm64: dts: qcom: qcs8300: enable pcie0")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-15-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 489f14be0e ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-14-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 718cc7542a ("arm64: dts: qcom: qcs615: enable pcie")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-13-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 19f1395333 ("arm64: dts: qcom: sm8750: Add PCIe PHY and controller node")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-12-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-11-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 7d1158c984 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-10-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 7b09b1b473 ("arm64: dts: qcom: sm8450: add PCIe0 RC device")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-9-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 6daee40678 ("arm64: dts: qcom: sm8350: add PCIe devices")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-8-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: e53bdfc009 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-7-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: a1c86c6805 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-6-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 5c538e09cb ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-5-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: d20b6c84f5 ("arm64: dts: qcom: sc8180x: Add PCIe instances")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-4-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: be9115bfe5 ("arm64: dts: qcom: sar2130p: add support for SAR2130P")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-3-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: f8328b7549 ("arm64: dts: qcom: sc7280: Describe the first PCIe controller and PHY")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-2-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 2eeb5767d5 ("arm64: dts: qcom: Introduce Kaanapali SoC")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-1-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
elish declares the same qcom,msm-id and qcom,board-id pair as
sm8250-sony-xperia-edo.dtsi, so a bootloader choosing between appended
device trees cannot tell the two boards apart.
0x10008 is Sony's value. The downstream device tree for this board,
elish-sm8250-overlay.dts, uses qcom,board-id = <47 0>, i.e. platform
type 0x2f.
Fixes: a41b617530 ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro")
Signed-off-by: Dawid Wróbel <me@dawidwrobel.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-elish-board-id-v1-1-92f99e9722ec@dawidwrobel.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
opp-1094400000 in cpu6_opp_table has a typo in opp-hz, missing a trailing
zero. Fix it to resolve the following OPP update failures:
cpu cpu6: Voltage update failed freq=1094400
cpu cpu6: failed to update OPP for freq=1094400
Fixes: 44562f5918 ("arm64: dts: qcom: qcs615: Add OSM l3 interconnect provider node and CPU OPP tables to scale DDR/L3")
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-talos-cpu6-opp-fix-v1-1-f4886fdff13f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some of the sub-ranges are inconsistent with HW docs. Fix them.
They are valid for both Glymur and Mahua.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260729-topic-glymur_pdc-v1-1-8747789e35aa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the SPMI ADC channels on the PMK8550 SPMI5 ADC3 for the
other PMICS on the system.
The thermal nodes are sorted by the sensor channel to be
coherent with the system thermal nodes ordering.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-topic-sm8x50-adc5-gen3-v6-5-a507f4a1e537@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the SPMI ADC channels on the PMK8550 SPMI5 ADC3 for the
other PMICS on the system.
The thermal nodes are sorted by the sensor channel to be
coherent with the system thermal nodes ordering.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-topic-sm8x50-adc5-gen3-v6-4-a507f4a1e537@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
