Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When resuming it can happen that the TX queue is flushed even though it
is entirely empty. This is completely fine and should not be causing an
error level log message.
Return early from reclaim in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.7c152d0820be.I3ae39a9a470f47bfe4405f2e5c30327e157eb55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking if extra LTF should be disabled, we don't need to check the
the HW revision.
sband_eht_cap will be NULL if eht_capa::has_eht is false,
and that will be the case for the HWs that don't support EHT.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.78b0adbb7b50.I630a64f06ca86baecde6a2a238733b7df3cf70e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can happen that more errors occur after a firmware assertion. In that
case, having another log message after the restart has completed makes
it easier to see which errors where still part of the restart flow.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.d205dd88fb9d.Ic43a1b399f59d2ab1018ff2f9e6e3a0324692660@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the prep_add_interface() callback, so that in case
EMLSR is active and an AP or a P2P interface is do to be added,
EMLSR would be blocked.
Add a delayed work, so that in case that the interface was not
eventually added, EMLSR would be unblocked after 5 seconds.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.3baf282d0a01.Ife0a929455cb13a95ab197ca765d8db777ff9d89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers might need to also do this calculation, no point in
them duplicating the code. Since it's so simple, just make
it an inline.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to deal with (temporary) bandwidth reductions to/from
the AP such as the upcoming RX OMI changes, modify the min_def
calculation to also not take the chanreq width into account in
client mode. This normally changes nothing as the AP bandwidth
will be the same as the channel request's width. In the RX OMI
changes, however, the code will reduce the bandwidth for only
the AP STA, since the OMI is only to that, and TDLS STAs are
unaffected. Using the min_def for this case simplifies RX OMI
a lot.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.95a39c4f6f45.I2e7517fb1a7221dc6f60b0c752e4882042b4265d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Andrei previously fixed an issue in the client where the NSS
for links other than the primary/assoc/deflink isn't set. The
same issue appears to exist on the AP side, because there's
only a call to rate_control_rate_init() for the deflink, and
not any other links.
Rework the code a bit to do rate_control_rate_init() for links,
even if it really doesn't work with software rate control yet,
it does other things as well.
Also add rate_control_rate_init_all_links() to actually do it
properly when moving to ASSOC state in cfg80211.
Change the explicit call to ieee80211_sta_init_nss() to instead
be rate_control_rate_init() now in the client code, but also
add a call to rate_control_rate_init() when a link is added in
AP mode and the STA is already associated.
This should fix the NSS initialization issue, and perhaps pave
the way for actual software rate scaling a bit, in case anyone
cares in the future, but that of course needs a lot more than
just the init call.
We still need to fix the rate control _update_ as well, and the
sta_rc_update() driver method especially, but that will be in a
different patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.c693274a908f.I0376da02e9f5a30eaa1b5d0d01371ff09506d453@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_find_80211h_pwr_constr and ieee80211_find_cisco_dtpc don't
need the pointer to struct ieee80211_sub_if_data *sdata. Remove it and
it'll be one step closer to handle the power constraints per-link.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.3ea505cd74e7.Id416127544afd80e4fe7b275b612aef511fc64ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may need to track this. Make it available for them, and maintain
the value when beacons are received.
When link X receives a beacon, iterate the RNR elements and update all
the links with their respective data.
Track the link id that updated the data so that each link can know
whether the update came from its own beacon or from another link.
In case, the update came from the link's own beacon, always update the
updater link id.
The purpose is to let the low level driver know if a link is losing its
beacons. If link X is losing its beacons, it can still track the
bss_param_ch_cnt and know where the update came from.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, userspace hasn't been able to set this for many
years, and mac80211 has already rejected it (which is now no
longer needed), so reject SMPS mode (other than "OFF" to be
a bit more compatible) in AP mode. Also remove the parameter
from the AP settings struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.fe1fc46484cf.I8676fb52b818a4bedeb9c25b901e1396277ffc0b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to indicate to the driver that an interface is about to be
added so that the driver could prepare its resources early if it needs
so.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e0e8563e1c30.Ifccc96a46a347eb15752caefc9f4eff31f75ed47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
No big change at this point. Regular development and fixes are listed:
rtl8xxxu:
- correct beaconing for the case of STA + AP
rtw88:
- consolidate parser of RX descriptor as preparation to support coming
chips
rtw89:
- update BT-coexistence to improve user experience for RTL8852BE and
RTL8852BE-VT
- correct RTL8922AE RF calibration timeout time and print out firmware
log
- set proper PCI EQ value for RTL8852CE and RTL8922AE
- adjust to support MLO continuously
-----BEGIN PGP SIGNATURE-----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=qbTP
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-10-10' of https://github.com/pkshih/rtw
rtw-next patches for v6.13
No big change at this point. Regular development and fixes are listed:
rtl8xxxu:
- correct beaconing for the case of STA + AP
rtw88:
- consolidate parser of RX descriptor as preparation to support coming
chips
rtw89:
- update BT-coexistence to improve user experience for RTL8852BE and
RTL8852BE-VT
- correct RTL8922AE RF calibration timeout time and print out firmware
log
- set proper PCI EQ value for RTL8852CE and RTL8922AE
- adjust to support MLO continuously
cw1200_queue_requeue_all() has been unused since it was added in 2013 by commit
a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241012203852.229151-1-linux@treblig.org
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
brcms_debugfs_get_devdir() has been unused since it was added by commit
8e21df2389 ("brcmsmac: hardware info in debugfs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004004259.470853-1-linux@treblig.org
brcmf_cfg80211_get_iftype() has been unused since 2013's commit
5cd51c2bad ("brcmfmac: Find correct MAC descriptor in case of TDLS.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004004252.470836-1-linux@treblig.org
It seems it is necessary to set WILC MAC address after operation mode,
otherwise the MAC address of the WILC MAC is reset back to what is in
nvmem. This causes a failure to associate with AP after the WILC MAC
address was overridden by userspace.
Test case:
"
ap$ cat << EOF > hostap.conf
interface=wlan0
ssid=ssid
hw_mode=g
channel=6
wpa=2
wpa_passphrase=pass
wpa_key_mgmt=WPA-PSK
EOF
ap$ hostapd -d hostap.conf
ap$ ifconfig wlan0 10.0.0.1
"
"
sta$ ifconfig wlan0 hw ether 00:11:22:33:44:55
sta$ wpa_supplicant -i wlan0 -c <(wpa_passphrase ssid pass)
sta$ ifconfig wlan0 10.0.0.2
sta$ ping 10.0.0.1 # fails without this patch
"
AP still indicates SA with original MAC address from nvmem without this patch:
"
nl80211: RX frame da=ff:ff:ff:ff:ff:ff sa=60:01:23:45:67:89 bssid=ff:ff:ff:ff:ff:ff ...
^^^^^^^^^^^^^^^^^
"
Fixes: 83d9b54ee5 ("wifi: wilc1000: read MAC address from fuse at probe")
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241003132504.52233-1-marex@denx.de
Remove set but otherwise unused 'adhoc_is_link_sensed' and
'assoc_resp_ht_param' members of 'struct mwifiex_private' and
simplify related code in 'mwifiex_ret_802_11_associate()'.
Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240927084317.96687-2-dmantipov@yandex.ru
Remove set but otherwise unused 'do_setup' member of
'struct mwifiex_auto_tdls_peer'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240927084317.96687-1-dmantipov@yandex.ru
Add support for the WILC3000 chip. The chip is similar to WILC1000,
except that the register layout is slightly different and it does
not support WPA3/SAE.
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC1000SD 07 SPI WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1
Tested-on: WILC3000 A SPI WILC_WIFI_FW_REL_16_1_1
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-7-marex@denx.de
Register wiphy after reading out chipid, so the chipid can be
used to determine chip features and not advertise WPA3/SAE
support to userspace on WILC3000. Note that wilc_netdev_cleanup()
will deregister the wiphy in fail path.
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-6-marex@denx.de
The wilc_create_wiphy() is not used outside of cfg80211.c .
Make the function static and remove its entry from cfg80211.h
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-5-marex@denx.de
Add error handling to chip_wakeup() and propagate the errors throughout
the entire driver. Add error handling to acquire_bus()/release_bus() and
host_sleep_notify()/host_wakeup_notify() functions as a result as well.
Fill the error handling to all call sites.
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-4-marex@denx.de
Neither chip_allow_sleep()/chip_wakeup() is used outside of wlan.c .
Make both functions static and remove both the exported symbol and
entries from wlan.h .
Make chip_allow_sleep() return error code in preparation for the
follow up patches.
Move acquire_bus() and release_bus() to avoid forward declaration
of chip_allow_sleep()/chip_wakeup().
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-3-marex@denx.de
Reduce the use of wilc_get_chipid(), use cached chip ID wherever
possible. Remove duplicated partial chip ID read implementations
from the driver. Update wilc_get_chipid() to always read the chip
ID out of the hardware and update the cached chip ID, and make it
return a proper return value instead of a chipid. Call wilc_get_chipid()
early to make the cached chip ID available to various sites using
is_wilc1000() to access the cached chip ID.
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-2-marex@denx.de
Document compatible string for the WILC3000 chip. The chip is similar
to WILC1000, except that the register layout is slightly different and
it does not support WPA3/SAE.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-1-marex@denx.de
The WILC3000 can suspend and enter low power state. According to local
measurements, the WILC3000 consumes the same amount of power if the slot
is powered up and WILC3000 is suspended, and if the WILC3000 is powered
off. Use the former option, keep the WILC3000 powered up as that allows
for things like WoWlan to work.
Note that this is tested on WILC3000 only, not on WILC1000 .
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240926195113.2823392-1-marex@denx.de
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240920025917.1959932-1-yanzhen@vivo.com
cfg80211_rx_assoc_resp() and cfg80211_rx_mlme_mgmt() need to be called
with the wiphy locked, so lock it before calling these functions.
Fixes: 36995892c2 ("wifi: mwifiex: add host mlme for client mode")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240918-mwifiex-cleanup-1-v2-1-2d0597187d3c@pengutronix.de
The older firmware of 8852A and 8852B can't receive packets via
CPU IO function and will lead to WoWLAN fail if calling it.
So use firmware feature to distinguish.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241004065408.10261-1-pkshih@realtek.com
To parsing firmware report correctly, driver need to re-order the report
index to match with different chips and different Wi-Fi firmware version.
Use wrong index to parse the report will lead the coexistence run into
wrong mechanism.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-5-pkshih@realtek.com
Some Bluetooth device will make up connection as PAN link, though the
connection is idle, it will still report the PAN link is active. The
coexistence mechanism will enable TDMA to protect the PAN, it makes
Wi-Fi throughput degrade at least 50%. But the link is idle, don't
need so much bandwidth. Add TDMA case to let Wi-Fi can do traffic 80%
bandwidth.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-4-pkshih@realtek.com
