The global variable cfm_dbg points to the s390dbf debug buffer.
Rename it to paidbg to better reflect its purpose.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the global kernel command line parameter
memory_hotplug.memmap_on_memory is set to false, per-memory-block
memmap_on_memory setting can still be set to true. However, when
configuring memory block, add_memory_resource() would configure it
without memmap_on_memory.
i.e.
Even if the MHP_MEMMAP_ON_MEMORY flag is set,
mhp_supports_memmap_on_memory() returns false unless the kernel command
line parameter "memory_hotplug.memmap_on_memory" is enabled. When both
the flag and the cmdline parameter are set, the memory block can be
configured with or without memmap_on_memory support.
To ensure consistent behavior, permit configuring per-memory-block
memmap_on_memory only when the memory_hotplug.memmap_on_memory kernel
command line parameter is enabled.
This is similar to commit 73954d379e ("dax: add a sysfs knob to
control memmap_on_memory behavior")
Fixes: ff18dcb19a ("s390/sclp: Add support for dynamic (de)configuration of memory")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Higher steal time thresholds favor low utilization scenarios, which is not
the common case for s390. Set steal time threshold to a lower value to
prioritize vertical high and medium CPUs sooner and allow high utilization
scenarios to benefit from it.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
pcpu_delegate() never returns to its caller. If the target CPU is the
current CPU, it calls __pcpu_delegate(), whose delegate function is not
supposed to return. In any case, even if __pcpu_delegate() unexpectedly
returns, pcpu_delegate() sends SIGP_STOP to the current CPU and waits
in an infinite loop. Annotate pcpu_delegate() with the __noreturn
attribute to improve compiler optimizations.
Also annotate smp_call_ipl_cpu() accordingly since it always calls
pcpu_delegate().
[hca: Merge two patches from Thorsten Blum]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
s390_handle_damage() ends by calling the non-returning function
disabled_wait() and therefore also never returns. Annotate it with the
__noreturn compiler attribute to improve compiler optimizations.
Remove the unreachable infinite while loop.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens says:
====================
Add the Dat-Enhancement facility 1 to the list of facilities which are
required to start the kernel. The facility provides the CSPG and IDTE
instructions. In particular the CSPG instruction can be used to replace a
valid page table entry with a different page table entry, which also
differs in the page frame real address.
Without the CSPG instruction it is possible to use the CSP instruction to
change valid page table entries, however it only allows to change the lower
or higher 32 bits of such entries, which means it cannot be used to change
the page frame real address of valid page table entries.
Given that there is code around (e.g. HugeTLB vmemmap optimization) which
requires to change valid page table entries of the kernel mapping, without
the detour over an invalid page table entry, make the CSPG instruction
unconditionally available.
The Dat-Enhancement facility 1 is available since z990, which is older than
the currently supported minimum architecture (z10). Therefore adding this
the architecture level set shouldn't cause any problems.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The CSPG instruction is part of the Dat-Enhancement facility 1, which
is always available. Given that it can be used everywhere where also
the CSP instruction can be used, replace CSP with CSPG everywhere.
This allows to remove the csp() inline assembly. Also remove the
unused gmap_pmdp_csp() function.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove cpu_has_idte(). The IDTE instruction is part of the
Dat-Enhancement facility 1, which is always available.
Therefore remove the helper and now superfluous code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add the Dat-Enhancement facility 1 to the list of facilities which are
required to start the kernel. The facility provides the CSPG and IDTE
instructions. In particular the CSPG instruction can be used to replace a
valid page table entry with a different page table entry, which also
differs in the page frame real address.
Without the CSPG instruction it is possible to use the CSP instruction to
change valid page table entries, however it only allows to change the lower
or higher 32 bits of such entries, which means it cannot be used to change
the page frame real address of valid page table entries.
Given that there is code around (e.g. HugeTLB vmemmap optimization) which
requires to change valid page table entries of the kernel mapping, without
the detour over an invalid page table entry, make the CSPG instruction
unconditionally available.
The Dat-Enhancement facility 1 is available since z990, which is older than
the currently supported minimum architecture (z10). Therefore adding this
to the architecture level set shouldn't cause any problems.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If no AP instructions are available the AP bus module leaks registered
debug feature files. Change function call order to fix this.
Fixes: cccd85bfb7 ("s390/zcrypt: Rework debug feature invocations.")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The psw_bits() macro makes use of typecheck() without that typecheck.h
is included. Add the missing include to avoid potential future compile
problems.
[hca@linux.ibm.com: change commit message]
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The AP bus udev event BINDINGS=complete is sent out when the
first time all devices detected by the AP bus scan have been
bound to device drivers. This is the ideal time to for example
change the AP bus masks apmask and aqmask to re-establish a
persistent change on the decision about which cards/domains
should be available for the host and which should go into the
pool for kvm guests.
However, if exactly this initial udev event is sent out early
in the boot process a udev rule may not have been established
yet and thus this event will never be recognized. To have
some indication about if the AP bus binding complete has
already happened, the internal ap_bindings_complete_count
counter is exposed via sysfs with this patch.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In case SCLP CPU detection does not work a fallback mechanism using SIGP is
in place. Since a cleanup this does not work correctly anymore: new CPUs
are only considered if their type matches the boot CPU.
Before the cleanup the information if a CPU type should be considered was
also part of a structure generated by the fallback mechanism and indicated
that a CPU type should not be considered when adding CPUs.
Since the rework a global SCLP state is used instead. If the global SCLP
state indicates that the CPU type should be considered and the fallback
mechanism is used, there may be a mismatch with CPU types if CPUs are
added. This can lead to a system with only a single CPU even tough there
are many more CPUs.
Address this by simply copying the boot cpu type into the generated data
structure from the fallback mechanism.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Fixes: d08d94306e ("s390/smp: cleanup core vs. cpu in the SCLP interface")
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Emit an error log when a PCI function cannot be enabled for use, despite
being reported as configured to the system.
This brings to attention situations where functions might go missing
without notice. Going unnoticed is less likely when functions are added
to the system through hotplug, but will produce the same error log.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Harald Freudenberger says:
====================
Investigations related to runtime of crypto requests has revealed a lack of
performance or runtime information with crypto requests. There are the two
zcrypt ioctl trace events covering the entry and exit of an ioctl with
crypto requests giving the overall runtime within the kernel. However,
there is no way to figure out the time where a request is enqueued into the
AP bus queue but not pushed into the firmware queue. Then there is no
information about the runtime of an request during processing in the
firmware. And finally some info about pulling the reply from the firmware
and delivering it into user space is missing.
This series is aiming to provide a way to collect measurements which can be
used to cover these runtime information for each crypto request/reply.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce two new AP bus related tracepoint events:
- There is a tracepoint s390_ap_nqap event immediately after a request
has been pushed into the AP firmware queue with the NQAP AP command.
- The other tracepoint s390_ap_dqap event fires immediately after a
reply has been pulled out of the AP firmware queue via DQAP AP
command.
Both events are triggered unconditional and may need filtering.
Filtering can be done based on the status value which is part of
the nqap and dqap trace. So for example a
echo "!(status & 0x00ff0000)" >.../s390_ap_dqap/filter
filters out all trace events which have a response_code != 0
leaving just the successful nqap and dqap invocations.
The idea of these two trace events focuses on performance to measure
the runtime of a crypto request/reply as close as possible at the
firmware level. In combination with the two zcrypt tracepoints (see
the zcrypt.h trace event definition file) this gives measurement data
about the runtime of a request/reply within the zcrpyt and AP bus
layer. However, with having the status of these AP commands in hand
also other usage may be possible.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sometimes there is a different view of the AP status word
needed. So here is slight rework of the struct ap_queue_status
to open up the possibility to have different ways of accessing
the AP status bits and fields.
The new struct ap_queue_status
struct ap_queue_status {
union {
unsigned int value : 32;
struct {
unsigned int status_bits : 8;
unsigned int rc : 8;
unsigned int : 16;
};
struct {
unsigned int queue_empty : 1;
unsigned int replies_waiting : 1;
unsigned int queue_full : 1;
unsigned int : 3;
unsigned int async : 1;
unsigned int irq_enabled : 1;
unsigned int response_code : 8;
unsigned int : 16;
};
};
};
comprises the old struct ap_queue_status but extends it
to have this also accessible as an unsigned int required
for example for a simple print or trace of the whole value.
Note that this rework is fully backward compatible to the
existing code exploiting the struct ap_queue_status.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This is a slight rework of the s390_zcrypt_req and s390_zcrypt_rep
trace event:
- the psmid has been added to the s390_zcrypt_rep
- "dev" renamed to "card"
- "domain" renamed to "dom"
The motivation of these changes is to make these traces more
aligned to new upcoming traces for AP bus related trace events.
Additionally the psmid is needed to match the reply (and thus
indirect the request) to AP bus related trace events where only
the psmid is unique identifying AP messages.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The pt_dump_seq_puts() macro incorrectly uses seq_printf() instead of
seq_puts(). This is both a performance issue and conceptually wrong,
as the macro name suggests plain string output (puts) but the
implementation uses formatted output (printf).
The macro is used in dump_pagetables.c:67-68 and 131 to output
constant strings. Using seq_printf() adds unnecessary overhead for
format string parsing.
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Jan Höppner says:
====================
The tape device driver is limited to a block size of 65535 bytes since a
single CCW can only transfer up to 64K-1 bytes (The count field is a
16bit value). This series introduces data chaining for all read/write
functions to support block sizes larger than 65535.
The tape device type 3490 (emulated) and 3590/3592 can handle up to
256K. [1]
[1] https://www.ibm.com/docs/en/zos/3.1.0?topic=blksize-system-determined-block-size
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The tape device type 3590/3592 and emulated 3490 VTS can handle a block
size of up to 256K bytes. Currently the tape device driver is limited to
a block size of 65535 bytes (64K-1). This limitation stems from the
maximum of 65535 bytes of data that can be transferred with one
Channel-Command Word (CCW).
To work around this limitation data chaining is used which uses several
CCW to transfer an entire 256K block of data. A single CCW holds a
maximum of 65535 bytes of data.
Set MAX_BLOCKSIZE to 262144 (= 256K) to allow for data transfers with
larger block sizes. The read_block() and write_block() discipline
functions calculate the number of CCWs required based on the IDAL buffer
array size that was created for a given block size. If there is more
than one CCW required for the data transfer, the new helper function
tape_ccw_dc_idal() is used to build the data chain accordingly.
The Interruption-Repsonse Block (irb) is added to the tape_request
struct so that the tapechar_read/write() functions can analyze what data
was read or written accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The tape device driver uses a single idal_buffer for I/O. While the
buffer itself can be arbitrary big, the limit for data transfer for a
single Channel-Command Word is at 65535 bytes (64K-1) since the count
field specifying the amount of data designated by the CCW is a 16-bit
unsigned value.
Provide functionality that allocates an array of multiple IDAL buffer
with the limitation mentioned above in mind.
A call to idal_buffer_array_alloc() allocates an array with a certain
amount of IDAL buffers which is determined based on the total size of
@size. Each individual buffer is limited to a size of CCW_MAX_BYTE_COUNT
(65535 bytes).
Add helper functions that determine the size (# of elements) and the
total data size covered by the array as well.
Current users of the single IDAL buffer are adapted to use the new
functions with one buffer to allocate.
The single IDAL buffer is removed from the tape_char_data struct.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently tapechar_check_idalbuffer() is part of tape_char.c and is used
to ensure the idal buffer is big enough for the requested I/O and
reallocates a new one if required. The same is done in tape_std.c when a
fixed block size is set using the mtsetblk command. This is essentially
duplicate code.
The allocation of the buffer that is required for I/O can be considered
core functionality. Move the idal buffer allocation to tape_core.c,
make it generally available, and reduce code duplication.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In contrast to all other helper functions used to build CCW chains,
tape_ccw_cc_idal() and tape_ccw_end_idal() return values using
post-increments, which results in returning the same CCW pointer.
Though, the intent of the CCW helper functions is to return the _next_
CCW in the chain, which can then be processed.
There is currently no actual issue, as tape_ccw_cc_idal() is not used
yet and tape_ccw_end_idal() is only used at the end of a chain.
Change both functions return statement to ccw + 1 and bring them in line
with the other helper functions.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The Read Opposite error recovery code required 2 extra CCWs to be
allocated in order to transform the request. As this error recovery code
for both 34xx and 3590 was removed the additional allocation isn't
required anymore. Reduce it to two.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On old native type 3590 tape devices a Read Opposite error recovery
procedure on Error Recovery Action Code (ERA) 26 was issued if a Read
Forward command failed. This recovery procedure was implemented with the
Read Backward command. This is no longer supported.
Remove 3590 ERA 26 and Read Backward related recovery code.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On old native type 3490 tape devices a Read Opposite error recovery
procedure on Error Recovery Action Code (ERA) 26 was issued if a Read
Forward command failed. This recovery procedure was implemented with the
Read Backward command.
As a preparation for a subsequent commit, that adds support for bigger
block sizes, remove the 34xx ERA 26 related recovery code. The recovery
code would need to be adapted to the bigger block sizes, without any
possibility to be tested, as modern Virtual Tape Servers (VTS) do
neither report ERA 26 on a Read Forward command failure nor support the
error recovery procedure anymore.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The count parameter of the read/write_block discipline functions was
never used. Remove it.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sumanth Korikkar says:
====================
Provide a new interface for dynamic configuration and
deconfiguration of hotplug memory on s390, allowing with/without
memmap_on_memory support. It is a follow up on the discussion with David
when introducing memmap_on_memory support for s390 and support dynamic
(de)configuration of memory:
https://lore.kernel.org/all/ee492da8-74b4-4a97-8b24-73e07257f01d@redhat.com/https://lore.kernel.org/all/20241202082732.3959803-1-sumanthk@linux.ibm.com/
The original motivation for introducing memmap_on_memory on s390 was to
avoid using online memory to store struct pages metadata, particularly
for standby memory blocks. This became critical in cases where there was
an imbalance between standby and online memory, potentially leading to
boot failures due to insufficient memory for metadata allocation.
To address this, memmap_on_memory was utilized on s390. However, in its
current form, it adds struct pages metadata at the start of each memory
block at the time of addition (only standby memory), and this
configuration is static. It cannot be changed at runtime (When the user
needs continuous physical memory).
Inorder to provide more flexibility to the user and overcome the above
limitation, add an option to dynamically configure and deconfigure
hotpluggable memory block with/without memmap_on_memory.
With the new interface, s390 will not add all possible hotplug memory in
advance, like before, to make it visible in sysfs for online/offline
actions. Instead, before memory block can be set online, it has to be
configured via a new interface in /sys/firmware/memory/memoryX/config,
which makes s390 similar to others. i.e. Adding of hotpluggable memory is
controlled by the user instead of adding it at boottime.
s390 kernel sysfs interface to configure/deconfigure memory with
memmap_on_memory (with upcoming lsmem changes):
* Initial memory layout:
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Configure memory
echo 1 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0x87ffffff 128M offline 16 yes yes
0x88000000-0xffffffff 1.9G offline 17-31 no yes
* Deconfigure memory
echo 0 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Enable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no no
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
(Enable memmap_on_memory and online it)
echo 1 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M online 5 yes yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Disable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
(Disable memmap_on_memory and online it)
echo 0 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Userspace changes:
lsmem/chmem tool is also changed to use the new interface. I will send
it to util-linux soon.
Patch 1 adds support for removal of boot-allocated memory blocks.
Patch 2 provides option to dynamically configure and deconfigure memory
with/without memmap_on_memory.
Patch 3 removes MHP_OFFLINE_INACCESSIBLE from s390. The mhp flag was
used to mark memory as not accessible until memory hotplug online phase
begins. However, with patch 2, it is no longer essential. Memory can be
brought to accessible state before adding memory, as the memory is added
during runttime now instead of boottime.
Patch 4 removes the MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers. It
is no longer needed. Memory can be brought to accessible state before
adding memory now, with runtime (de)configuration of memory.
Note: The patches apply to the linux-next branch.
v3:
Thanks David
* Avoid goto label in create_standby_sclp_mems().
* Use unsigned long instead of u64.
* Add Acked-by.
v2:
Thanks David
* Rename struct mblock/mblock_arg with struct sclp_mem/sclp_mem_arg.
* Rename all mblocks/mblock references with sclp_mems/sclp_mem -
structures, functions.
* Rename create_online_mblock() with create_configured_sclp_mem().
* Rename config_mblock_show()/config_mblock_store() with
config_sclp_mem_show()/config_sclp_mem_store().
* Remove contains_standby_increment() and
sclp_mem_notifier. sclp mem state change is performed when
adding/removing memory. sclp memory notifier - no longer needed with
this patchset.
* Recover sclp mem state when add_memory() fails.
* Refactor and add function init_sclp_mem().
* Use unsigned long instead of unsigned long long.
* Simplify and correct kobj handling. Thanks Heiko.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Adjust the return statement in paicrypt_copy() to the same statement
as in paiext_copy(). Use one common style. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace sprintf() with snprintf() when formatting symlink target name
to prevent potential buffer overflow. The link_to buffer is only 10
bytes, and using snprintf() ensures proper bounds checking if the
topology nesting limit value is unexpectedly large.
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace unsafe sprintf() calls with snprintf() in segment_save() to
prevent potential buffer overflows. The function builds command strings
by repeatedly appending to a fixed-size buffer, which could overflow if
segment ranges are numerous or values are large.
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace sprintf() with scnprintf() in cmm_timeout_handler() to prevent
potential buffer overflow. The scnprintf() function ensures we don't
write beyond the buffer size and provides safer string formatting.
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
-----BEGIN PGP SIGNATURE-----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=uqJW
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the check for lost pelt idle time is done unconditionally
to have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
* tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix pelt lost idle time detection
sched/deadline: Stop dl_server before CPU goes offline
- Move the uprobe optimization to a better location logically
-----BEGIN PGP SIGNATURE-----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=huy7
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure perf reporting works correctly in setups using
overlayfs or FUSE
- Move the uprobe optimization to a better location logically
* tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix MMAP2 event device with backing files
perf/core: Fix MMAP event path names with backing files
perf/core: Fix address filter match with backing files
uprobe: Move arch_uprobe_optimize right after handlers execution
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously not
flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range of
a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of monitoring
groups created exceeds the number the hardware can track
-----BEGIN PGP SIGNATURE-----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=WMx2
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Reset the why-the-system-rebooted register on AMD to avoid stale bits
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously
not flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range
of a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of
monitoring groups created exceeds the number the hardware can track
* tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Prevent reset reasons from being retained across reboot
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
x86/mm: Fix overflow in __cpa_addr()
x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment with
the trailing empty comment workaround and make the tree 'rustfmt'-clean
again.
-----BEGIN PGP SIGNATURE-----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=44ap
-----END PGP SIGNATURE-----
Merge tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
If possible, could you still pick this change for v6.18 [1]? The change in
question corrects the state transitions for ARM FF-A to match the spec and
how tpm_crb behaves on other platforms.
[1] https://lore.kernel.org/linux-integrity/aPN59bwcUrieMACf@kernel.org/
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaPN84QAKCRAaerohdGur
0q4SAQD0o1dG70qraZjVU+xySiz/jGb04d49A/LxKJj/LIXxPQD/W3xjulnS3S25
rWoIn7wO6NeiGUiUPSnCEc6LDIOYYQA=
=wbvF
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"Correct the state transitions for ARM FF-A to match the spec and how
tpm_crb behaves on other platforms"
* tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: Add idle support for the Arm FF-A start method
-----BEGIN PGP SIGNATURE-----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=oXKT
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Search for MSI Capability with correct ID to fix an MSI regression on
platforms with Cadence IP (Hans Zhang)
- Revert early bridge resource set up to fix resource assignment
failures that broke at least alpha boot and Snapdragon ath12k WiFi
(Ilpo Järvinen)
- Implement VMD .irq_startup()/.irq_shutdown() to fix IRQ issues that
caused boot crashes and broken devices below VMD (Inochi Amaoto)
- Select CONFIG_SCREEN_INFO on X86 to fix black screen on boot when
SCREEN_INFO not selected (Mario Limonciello)
* tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/VGA: Select SCREEN_INFO on X86
PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info()
PCI: Revert early bridge resource set up
PCI: cadence: Search for MSI Capability with correct ID
- Avoid missing port component registers setup due to dport enumeration
failure
- Add check for no entries in cxl_feature_info to address accessing
invalid pointer.
- Use %pa printk format to emit resource_size_t in
validate_region_offset()
CXL extended linear cache support fixes:
- Fix setup of memory resource in cxl_acpi_set_cache_size()
- Set range param for region_res_match_cxl_range() as const.
(Addresses a compile warning for match_region_by_range() fix)
- Fix match_region_by_range() to use region_res_match_cxl_range()
- Subtract to find an hpa_alias0 in cxl_poison events to correct
the alias math calculation.
-----BEGIN PGP SIGNATURE-----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=jGVm
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link fixes from Dave Jiang:
"A small collection of CXL fixes. In addition to some misc fixes for
the CXL subsystem, a number of fixes for CXL extended linear cache
support are included to make it functional again.
- Avoid missing port component registers setup due to dport
enumeration failure
- Add check for no entries in cxl_feature_info to address accessing
invalid pointer.
- Use %pa printk format to emit resource_size_t in
validate_region_offset()
CXL extended linear cache support fixes:
- Fix setup of memory resource in cxl_acpi_set_cache_size()
- Set range param for region_res_match_cxl_range() as const
(addresses a compile warning for match_region_by_range() fix)
- Fix match_region_by_range() to use region_res_match_cxl_range()
- Subtract to find an hpa_alias0 in cxl_poison events to correct the
alias math calculation"
* tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events
cxl/region: Use %pa printk format to emit resource_size_t
cxl: Fix match_region_by_range() to use region_res_match_cxl_range()
cxl: Set range param for region_res_match_cxl_range() as const
cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size()
cxl/features: Add check for no entries in cxl_feature_info
cxl/port: Avoid missing port component registers setup
-----BEGIN PGP SIGNATURE-----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=p8bI
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
