[ Upstream commit 4fe823b9ee ]
Do not take into account offchannel links for deflink accounting.
Fixes: a3316d2fc6 ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-4-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aaaaeacf1 ]
Move mt76_abort_scan routine out of mt76_reset_device() in order to
avoid a possible deadlock since mt76_reset_device routine is running
with mt76 mutex help and mt76_abort_scan_complete() can grab mt76 mutex
in some cases.
Fixes: b36d556102 ("wifi: mt76: abort scan/roc on hw restart")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-3-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a4bcba26e ]
Grab mt76 mutex in mt7996_mac_sta_event routine in order to rely on
mt76_dereference() utility macro.
Fixes: ecd72f9695 ("wifi: mt76: mt7996: Support MLO in mt7996_mac_sta_event()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-1-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4031fec9d ]
The RRO EMI rings only need to be allocated when WED is not active.
This patch fixes command timeout issue for the setting of WED off and
RRO on.
Fixes: 3a29164425 ("wifi: mt76: mt7996: Add SW path for HW-RRO v3.1")
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-12-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e11be918d9 ]
This patch fixes the following key issues:
- Pass correct link BSS to mt7996_mcu_add_key(), and use HW beacon
protection mode for mt7990 chipset
- Do not do group key deletion for GTK and IGTK due to FW design, the
delete key command will delete all group keys of a link BSS
- For deleting BIGTK, FW adds a new flow, but the "sec->add" field
should be filled with "SET_KEY". Note that if BIGTK is not deleted, it
will cause beacon decryption issue when switching from an AP interface
to a station interface
Fixes: 0c45d52276 ("wifi: mt76: mt7996: fix setting beacon protection keys")
Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-10-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eaea3a8ba ]
This ensures the upper layer uses the correct link ID during packet
processing.
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e077071e7a ]
For an MLD peer, we only need to call the teardown command when removing
the last link, and there's no need to call mt7996_mcu_add_sta() for the
earlier links.
Fixes: c1d6dd5d03 ("wifi: mt76: mt7996: Add mt7996_mcu_teardown_mld_sta rouine")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb705a6067 ]
Fix several fields in mt7996_mcu_bss_basic_tlv() that were not obtained
from the correct link. Without this patch, the MLD station interface
does not function properly.
Fixes: 34a41bfbcb ("wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d86765828 ]
Fix the ibf_timeout field for mt7996, mt7992 and mt7990 chipsets. For
the mt7992, this value shall be set as 0xff, while the others shall be
set as 0x18.
Fixes: ad4c9a8a98 ("wifi: mt76: mt7996: add implicit beamforming support for mt7992")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 361b59b6be ]
Since wiphy->available_antennas_tx now accumulates the chainmask of all
the radios of a wiphy, use phy->orig_antenna_mask to get the original
max nss for comparison.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdb2941a51 ]
This reverts commit 55e95ce469.
mt792x drivers don't seem to support multi-radio devices yet. At least
they don't mess with `struct wiphy_radio` at the moment.
Packet capturing on monitor interface doesn't work after the blamed patch:
tcpdump -i wls6mon -n -vvv
Revert the NO_VIRTUAL_MONITOR feature for now to resolve the issue.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 55e95ce469 ("wifi: mt76: mt792x: improve monitor interface handling")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251027111843.38975-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 084922069c ]
Remove unnecessary link_id checks in mt7996_tx routine since if the link
identifier provided by mac80211 is unspecified the value will be
overwritten at the beginning on the function.
Fixes: f940c9b7ae ("wifi: mt76: mt7996: Set proper link destination address in mt7996_tx()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250924-mt76_tx_unnecessary-check-v1-1-e595930a5662@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79277f8ad1 ]
If a link does not have an assigned channel yet, mt7996_vif_link returns
NULL. We still need to store the updated queue settings in that case, and
apply them later.
Move the location of the queue params to within struct mt7996_vif_link.
Fixes: c0df2f0caa ("wifi: mt76: mt7996: prepare mt7996_mcu_set_tx for MLO support")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250929111723.52486-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 950167a99d ]
A wrong preiod at the end of the sentence was reported by one of my
customers. Their thorough code review is greatly appreciated.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20251121234427.402-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34b78ddd78 ]
The new variable of reset was added for TAS58XX on TAS5825 first.
And TAS5802/5815... was added later, so this reset variable check
should be changed to lowest chip of TAS58XX.
Fixes: 53a3c6e222 ("ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251124031542.2793-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebbdf6466b ]
The partial block length returned by a block-only driver should
not be passed up to the caller since ahash itself deals with the
partial block data.
Set err to zero in ahash_update_finish if it was positive.
Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0356b75f4 ]
Restore the partial block buffer in crypto_ahash_import by copying
it. Check whether the partial block buffer exceeds the maximum
size and return -EOVERFLOW if it does.
Zero the partial block buffer in crypto_ahash_import_core.
Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26c4c7cdb ]
DMA MR doesn't use the unified MR model. So the lkey passed
on to the reg_mr command to FW should contain the correct
lkey. Driver is incorrectly over writing the lkey with pdid
and firmware commands fails due to this.
Avoid passing the wrong key for cases where the unified MR
registration is not used.
Fixes: f786eebbbe ("RDMA/bnxt_re: Avoid an extra hwrm per MR creation")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6afe40ff48 ]
Inline size supported by the device is based on the number
of SGEs supported by the adapter. Change the inline
size calculation based on that.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebe4f3f6eb ]
The detection of the primary device is skipped incorrectly
if the multiple or flattened feature is enabled.
It also fixes the FSDAX misdetection for non-block extra blobs.
Fixes: c6993c4cb9 ("erofs: Fallback to normal access if DAX is not supported on extra device")
Reported-and-tested-by: syzbot+31b8fb02cb8a25bd5e78@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/691af9f6.a70a0220.3124cb.0097.GAE@google.com
Cc: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 974555d6e4 ]
When executing HLV* instructions at the HS mode, a guest page fault
may occur when a g-stage page table migration between triggering the
virtual instruction exception and executing the HLV* instruction.
This may be a corner case, and one simpler way to handle this is to
re-execute the instruction where the virtual instruction exception
occurred, and the guest page fault will be automatically handled.
Fixes: b91f0e4cb8 ("RISC-V: KVM: Factor-out instruction emulation into separate sources")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251121133543.46822-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8700ce07c5 ]
Fix error handling in cc_map_hash_request_update where sg_nents_for_len
return value was assigned to u32, converting negative errors to large
positive values before passing to sg_copy_to_buffer.
Check sg_nents_for_len return value and propagate errors before
assigning to areq_ctx->in_nents.
Fixes: b7ec853068 ("crypto: ccree - use std api when possible")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9eb52037a ]
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows.
Fixes: 7883d1b28a ("crypto: starfive - Add hash and HMAC support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3245f8990 ]
A successful ebpf tail call does not return to the caller, but to the
caller-of-the-caller, often just finishing the ebpf program altogether.
Any restrictions that the verifier needs to take into account - notably
the fact that the tail call might have modified packet pointers - are to
be checked on the caller-of-the-caller. Checking it on the caller made
the verifier refuse perfectly fine programs that would use the packet
pointers after a tail call, which is no problem as this code is only
executed if the tail call was unsuccessful, i.e. nothing happened.
This patch simulates the behavior of a tail call in the verifier. A
conditional jump to the code after the tail call is added for the case
of an unsucessful tail call, and a return to the caller is simulated for
a successful tail call.
For the successful case we assume that the tail call returns an int,
as tail calls are currently only allowed in functions that return and
int. We always assume that the tail call modified the packet pointers,
as we do not know what the tail call did.
For the unsuccessful case we know nothing happened, so we do not need to
add new constraints.
This approach also allows to check other problems that may occur with
tail calls, namely we are now able to check that precision is properly
propagated into subprograms using tail calls, as well as checking the
live slots in such a subprogram.
Fixes: 1a4607ffba ("bpf: consider that tail calls invalidate packet pointers")
Link: https://lore.kernel.org/bpf/20251029105828.1488347-1-martin.teichmann@xfel.eu/
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-2-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f7d76d6e ]
commit 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae24fc8a16 ]
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27746aaf1b ]
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 670500b41e ]
Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret". The "ret"
variable is success at this point.
Fixes: 3ce6f4f943 ("regulator: pca9450: Fix control register for LDO5")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSBqnPoBrsNB1Ale@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5160af78b ]
The previous commit removed the PAGE_SIZE limit on transfer length of
raw_io buffer in order to avoid any problems with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length. However
this also removes the upperbound on user supplied length, allowing very
large values to be passed to the allocator.
syzbot on fuzzing the transfer length with very large value (1.81GB)
results in kmalloc() to fall back to the page allocator, which triggers
a kernel warning as the page allocator cannot handle allocations more
than MAX_PAGE_ORDER/KMALLOC_MAX_SIZE.
Since there is no limit imposed on the size of buffer for both control
and non control transfers, cap the raw_io transfer length to
KMALLOC_MAX_SIZE and return -EINVAL for larger transfer length to
prevent any warnings from the page allocator.
Fixes: 37b9dd0d11 ("usb: raw-gadget: do not limit transfer length")
Tested-by: syzbot+d8fd35fa6177afa8c92b@syzkaller.appspotmail.com
Reported-by: syzbot+d8fd35fa6177afa8c92b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68fc07a0.a70a0220.3bf6c6.01ab.GAE@google.com/
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/20251028165659.50962-1-krishnagopi487@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b94b054ac ]
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But the dwc2_suspend() tries to read the dwc2's reg to check whether
is_device_mode or not, this would result in hang during suspend if dwc2
is configured as peripheral mode.
Fix this hang by bypassing suspend/resume if lowlevel hw isn't
enabled.
Fixes: 09a75e8577 ("usb: dwc2: refactor common low-level hw code to platform.c")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ebcfdcac ]
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But dwc2_driver_shutdown() tries to disable the interrupts on HW IP
level. This would result in hang during shutdown if dwc2 is configured
as peripheral mode.
Fix this hang by only disable and sync irq when lowlevel hw is enabled.
Fixes: 4fdf228cdf ("usb: dwc2: Fix shutdown callback in platform")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-2-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2fa8a12e6 ]
A failure to take a lock with O_NONBLOCK needs to result
in -EAGAIN. Change it.
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251030093918.2248104-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 738c9738e6 ]
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb6e42494 ]
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b0148 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34c170ae5c ]
osnoise test "top stop at failed action" is calling timerlat instead of
osnoise by mistake.
Fix it so that it calls the correct RTLA subcommand.
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d649e9f04c ]
In non-BPF mode, it takes up to 1 second for RTLA to notice that tracing
has been stopped. That means that action tests cannot have a 1 second
duration, as the SIGALRM will be racing with the threshold overflow.
Previously, non-BPF mode actions were buggy and always executed
the action, even when stopping on duration or SIGINT, preventing
this issue from manifesting. Now that this has been fixed, the tests
have become flaky, and this has to be adjusted.
Fixes: 4e26f84abf ("rtla/tests: Add tests for actions")
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05954511b7 ]
The ARM processor CPER record was added in UEFI v2.6 and remained
unchanged up to v2.10.
Yet, the original arm_event trace code added by
e9279e83ad ("trace, ras: add ARM processor error trace event")
is incomplete, as it only traces some fields of UAPI 2.6 table N.16, not
exporting any information from tables N.17 to N.29 of the record.
This is not enough for the user to be able to figure out what has
exactly happened or to take appropriate action.
According to the UEFI v2.9 specification chapter N2.4.4, the ARM
processor error section includes:
- several (ERR_INFO_NUM) ARM processor error information structures
(Tables N.17 to N.20);
- several (CONTEXT_INFO_NUM) ARM processor context information
structures (Tables N.21 to N.29);
- several vendor specific error information structures. The
size is given by Section Length minus the size of the other
fields.
In addition, it also exports two fields that are parsed by the GHES
driver when firmware reports it, e.g.:
- error severity
- CPU logical index
Report all of these information to userspace via a the ARM tracepoint so
that userspace can properly record the error and take decisions related
to CPU core isolation according to error severity and other info.
The updated ARM trace event now contains the following fields:
====================================== =============================
UEFI field on table N.16 ARM Processor trace fields
====================================== =============================
Validation handled when filling data for
affinity MPIDR and running
state.
ERR_INFO_NUM pei_len
CONTEXT_INFO_NUM ctx_len
Section Length indirectly reported by
pei_len, ctx_len and oem_len
Error affinity level affinity
MPIDR_EL1 mpidr
MIDR_EL1 midr
Running State running_state
PSCI State psci_state
Processor Error Information Structure pei_err - count at pei_len
Processor Context ctx_err- count at ctx_len
Vendor Specific Error Info oem - count at oem_len
====================================== =============================
It should be noted that decoding of tables N.17 to N.29, if needed, will
be handled in userspace. That gives more flexibility, as there won't be
any need to flood the kernel with micro-architecture specific error
decoding.
Also, decoding the other fields require a complex logic, and should be
done for each of the several values inside the record field. So, let
userspace daemons like rasdaemon decode them, parsing such tables and
having vendor-specific micro-architecture-specific decoders.
[mchehab: modified description, solved merge conflicts and fixed coding style]
Signed-off-by: Jason Tian <jason@os.amperecomputing.com>
Co-developed-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Ferguson <danielf@os.amperecomputing.com> # rebased
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: e9279e83ad ("trace, ras: add ARM processor error trace event")
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-section
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b647d2574e ]
The rtl8187_rx_cb() calculates the rx descriptor header address
by subtracting its size from the skb tail pointer.
However, it does not validate if the received packet
(skb->len from urb->actual_length) is large enough to contain this
header.
If a truncated packet is received, this will lead to a buffer
underflow, reading memory before the start of the skb data area,
and causing a kernel panic.
Add length checks for both rtl8187 and rtl8187b descriptor headers
before attempting to access them, dropping the packet cleanly if the
check fails.
Fixes: 6f7853f3cb ("rtl8187: change rtl8187_dev.c to support RTL8187B (part 2)")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251118013258.1789949-2-eeodqql09@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23b2d2fb13 ]
When booting with KASAN enabled the following splat is
encountered during probe of the k1 clock driver:
UBSAN: array-index-out-of-bounds in drivers/clk/spacemit/ccu-k1.c:1044:16
index 0 is out of range for type 'clk_hw *[*]'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc5+ #1 PREEMPT(lazy)
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2022.10spacemit 10/01/2022
Call Trace:
[<ffffffff8002b628>] dump_backtrace+0x28/0x38
[<ffffffff800027d2>] show_stack+0x3a/0x50
[<ffffffff800220c2>] dump_stack_lvl+0x5a/0x80
[<ffffffff80022100>] dump_stack+0x18/0x20
[<ffffffff800164b8>] ubsan_epilogue+0x10/0x48
[<ffffffff8099034e>] __ubsan_handle_out_of_bounds+0xa6/0xa8
[<ffffffff80acbfa6>] k1_ccu_probe+0x37e/0x420
[<ffffffff80b79e6e>] platform_probe+0x56/0x98
[<ffffffff80b76a7e>] really_probe+0x9e/0x350
[<ffffffff80b76db0>] __driver_probe_device+0x80/0x138
[<ffffffff80b76f52>] driver_probe_device+0x3a/0xd0
[<ffffffff80b771c4>] __driver_attach+0xac/0x1b8
[<ffffffff80b742fc>] bus_for_each_dev+0x6c/0xc8
[<ffffffff80b76296>] driver_attach+0x26/0x38
[<ffffffff80b759ae>] bus_add_driver+0x13e/0x268
[<ffffffff80b7836a>] driver_register+0x52/0x100
[<ffffffff80b79a78>] __platform_driver_register+0x28/0x38
[<ffffffff814585da>] k1_ccu_driver_init+0x22/0x38
[<ffffffff80023a8a>] do_one_initcall+0x62/0x2a0
[<ffffffff81401c60>] do_initcalls+0x170/0x1a8
[<ffffffff81401e7a>] kernel_init_freeable+0x16a/0x1e0
[<ffffffff811f7534>] kernel_init+0x2c/0x180
[<ffffffff80025f56>] ret_from_fork_kernel+0x16/0x1d8
[<ffffffff81205336>] ret_from_fork_kernel_asm+0x16/0x18
---[ end trace ]---
This is bogus and is simply a result of KASAN consulting the
`.num` member of the struct for bounds information (as it should
due to `__counted_by`) and finding 0 set by kzalloc() because it
has not been initialized before the loop that fills in the array.
The easy fix is to just move the line that sets `num` to before
the loop that fills the array so that KASAN has the information
it needs to accurately conclude that the access is valid.
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Tested-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1bcaed1e3 ]
Currently, the check for whether a partition is populated does not
account for tasks in the cpuset of attaching. This is a corner case
that can leave a task stuck in a partition with no effective CPUs.
The race condition occurs as follows:
cpu0 cpu1
//cpuset A with cpu N
migrate task p to A
cpuset_can_attach
// with effective cpus
// check ok
// cpuset_mutex is not held // clear cpuset.cpus.exclusive
// making effective cpus empty
update_exclusive_cpumask
// tasks_nocpu_error check ok
// empty effective cpus, partition valid
cpuset_attach
...
// task p stays in A, with non-effective cpus.
To fix this issue, this patch introduces cs_is_populated, which considers
tasks in the attaching cpuset. This new helper is used in validate_change
and partition_is_populated.
Fixes: e2d59900d9 ("cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bccaf1fe08 ]
Value CRSM_SFT_PD written to Software Power-Down Control Register
(CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value
CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for
confirmation powerdown has been reached.
The condition could have only worked when disabling powerdown
(both 0x00), but never when enabling it (0x01 != 0x02).
Result is a timeout, like so:
$ ifdown eth0
macb f802c000.ethernet eth0: Link is Down
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
Fixes: 7eaf913299 ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d088da9042 ]
subtest_kmem_cache_iter_check_slabinfo() fundamentally compares slab
cache names parsed out from /proc/slabinfo against those stored within
struct kmem_cache_result. The current problem is that the slab cache
name within struct kmem_cache_result is stored within a bounded
fixed-length array (sized to SLAB_NAME_MAX(32)), whereas the name
parsed out from /proc/slabinfo is not. Meaning, using ASSERT_STREQ()
can certainly lead to test failures, particularly when dealing with
slab cache names that are longer than SLAB_NAME_MAX(32)
bytes. Notably, kmem_cache_create() allows callers to create slab
caches with somewhat arbitrarily sized names via its __name identifier
argument, so exceeding the SLAB_NAME_MAX(32) limit that is in place
now can certainly happen.
Make subtest_kmem_cache_iter_check_slabinfo() more reliable by only
checking up to sizeof(struct kmem_cache_result.name) - 1 using
ASSERT_STRNEQ().
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20251118073734.4188710-1-mattbobrowski@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3508311f2e ]
The property name is "mipi-sdca-RxUMP-ownership-transition-max-delay",
with a dash between max and delay. Add the missing dash.
Fixes: 13ef21dffe ("ASoC: SDCA: add support for HIDE entity properties and HID descriptor/report")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120153023.2105663-3-ckeepax@opensource.cirrus.com
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
