The Linux Automation MC-1 is built around an OSD32MP15x SiP with CPU,
RAM, PMIC, Oscillator and EEPROM. Adjust the binding, so the SiP
compatible is contained as well. This allows boot firmware to match
against it to apply fixups if necessary.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Octavo Systems is an American company specializing in design and
manufacturing of System-in-Package devices.
The prefix is already in use for the Octavo Systems OSD3358-SM-RED
device tree, but was so far undocumented. Fix this.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Neeraj Dantu <neeraj.dantu@octavosystems.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The stm32mp1 TAMP peripheral has 32 backup registers that survive
a warm reset. This makes them suitable for storing a reboot
mode, which the vendor's kernel tree is already doing[0].
The actual syscon-reboot-mode child node can be added by a board.dts or
fixed up by the bootloader. For the child node to be probed, the
compatible needs to include simple-mfd. The binding now specifies this,
so have the SoC dtsi adhere to it.
[0]: 2e9bfc29dd
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The stm32mp1 TAMP (Tamper and backup registers) does tamper detection
and features 32 backup registers that, being in the RTC domain, may
survive even with Vdd switched off.
This makes it suitable for use to communicate a reboot mode from OS
to bootloader via the syscon-reboot-mode binding. Add a "simple-mfd"
to support probing such a child node. The actual reboot mode
node could then be defined in a board.dts or fixed up by the bootloader.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Two backup registers are used to store the Cortex-M4 state and the resource
table address.
Declare the tamp node and add associated properties in m4_rproc node
to allow Linux to attach to a firmware loaded by the first boot stages.
Associated driver implementation is available in commit 9276536f45
("remoteproc: stm32: Parse syscon that will manage M4 synchronisation").
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk
endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes).
This patch optimizes USB OTG FIFO sizes accordingly.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds support for STUSB1600 USB Type-C port controller, used on
I2C4 on stm32mp15xx-dkx.
The default configuration on this board, on Type-C connector, is:
- Dual Power Role (DRP), so set power-role to "dual";
- Vbus limited to 500mA, so set typec-power-opmode to "default" (it means
500mA in USB 2.0).
typec-power-opmode is used to reconfigure the STUSB1600 advertising of
current capability when its NVM is not in line with the board layout.
On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN. So power
operation mode depends on the power supply used. To avoid any power
issues, it is better to limit Vbus to 500mA on this board.
ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and
signal is active low.
USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx
boards, so disconnection are not detected.
Without DWC2 usb-role-switch:
- if you unplug the USB cable from the Type-C port, you have to manually
disconnect the USB gadget:
echo disconnect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect
- Then you can plug the USB cable again in the Type-C port, and manually
reconnect the USB gadget:
echo connect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect
With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Power operation mode may depends on hardware design, so, add the optional
property typec-power-opmode for usb-c connector to select the power
operation mode capability.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Move spi4 at the right alphabetical place within stm32mp15-pinctrl
Fixes: 4fe663890a ("ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
LP timer can be used to wakeup from stop mode on stm32mp151.
Add wakeup-source properties to all LP timer instances.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Update the IP version to v2.0, which supports linked lists in internal DMA,
and is present in STM32MP1 SoCs.
The mmci driver supports the v2.0 periph id since 7a2a98be67 ("mmc: mmci:
Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
the SoC device tree to benefit from the improved DMA support.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add bindings for the KS8851 ethernet present on the STM32MP1 DHCOM SoM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add another mux option for FMC EBI bus, this is used on DHCOM SoM
for the second ethernet and on the PDK2 devkit for SRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected
to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be
used e.g. to detect cable insertion and removal.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The VDDA LDO1 PMIC output supplies the analog VDDA input of the
STM32MP1 on DHCOM, keep it always on, otherwise there could be
leakage through the SoC.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The VIO regulator is supplied by PMIC Buck3, describe this in the DT.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the LED5 was connected to pin PG2 of the
STM32MP15xx, however on the production SoM this was changed to pin
PC6. Update the connection in the DT.
Fixes: 81d5fc7197 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of
the STM32MP15xx, however on the production SoM this was changed to pin PG0
to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in
the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared
with the button, make the button polled.
Fixes: 87cabf9405 ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.
If GIT_DIR is unset, keep using the current ".git" default.
Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
which are based on CLOCK_MONOTONIC require time namespace corrected. This
was missed in the original time namesapce support.
-----BEGIN PGP SIGNATURE-----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=VFCv
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array.
-----BEGIN PGP SIGNATURE-----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=RNOk
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
source bitmask of perf events correctly.
-----BEGIN PGP SIGNATURE-----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=vvcT
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix to compute the field offset of the SNOOPX bit in the data
source bitmask of perf events correctly"
* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: correct SNOOPX field offset
-----BEGIN PGP SIGNATURE-----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=YIEm
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.10' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-----BEGIN PGP SIGNATURE-----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=4LDZ
-----END PGP SIGNATURE-----
Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX5VVeQAKCRCAXGG7T9hj
voI0AQD3ol/EN9uHW1qKduBI/nl5tgv325Zri8CMu60kS45pgAD/ccUXRcHojs3l
YIfgcgT4qKQFWzv57Fc9FUBQJMahJgM=
=6ZgH
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
-----BEGIN PGP SIGNATURE-----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=/anB
-----END PGP SIGNATURE-----
Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linux
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
