As IPv6 is built-in only, the ipv6_bpf_stub can be removed completely.
Convert all ipv6_bpf_stub usage to direct function calls instead. The
fallback functions introduced previously will prevent linkage errors
when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260325120928.15848-10-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert remaining ipv6_stub users to make direct function calls. The
fallback functions introduced previously will prevent linkage errors
when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-9-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
The IPv4 stack interacts with IPv6 mainly to support IPv4 routes with
IPv6 next-hops (RFC 8950). Convert all these cross-family calls from
ipv6_stub to direct function calls. The fallback functions introduced
previously will prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-8-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert all drivers currently utilizing ipv6_stub to make direct
function calls. The fallback functions introduced previously will
prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260325120928.15848-7-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for dropping ipv6_stub and converting its users to direct
function calls, introduce static inline dummy functions and fallback
macros in the IPv6 networking headers. In addition, introduce checks on
fib6_nh_init(), ip6_dst_lookup_flow() and ip6_fragment() to avoid a
crash due to ipv6.disable=1 set during booting. The other functions are
safe as they cannot be called with ipv6.disable=1 set.
These fallbacks ensure that when CONFIG_IPV6 is completely disabled,
there are no compiling or linking errors due to code paths not guarded
by preprocessor macro IS_ENABLED(CONFIG_IPV6).
In addition, export ndisc_send_na(), ip6_route_input() and
ip6_fragment().
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-6-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, there is no need to maintain the sender
registration infrastructure used to allow built-in subsystems to send
ICMPv6 messages when IPv6 was compiled as a module.
Drop the registration mechanism and the __icmpv6_send() sender
implementation. While icmpv6_send() users could be converted to
icmp6_send() that doesn't seems necessary as none of them are using the
force_saddr parameter.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-5-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, it does not make sense to continue using
IS_BUILTIN(CONFIG_IPV6). Therefore, replace it with IS_ENABLED() when
necessary and drop it if it isn't valid anymore.
Notice that there is still one instance related to ICMPv6, as it
requires more changes it will be handle separately.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260325120928.15848-4-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the macro is always evaluating to an empty
one. Remove it completely from the code.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260325120928.15848-3-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During initialization of a VRF device, the VRF driver creates two dst
entries (for IPv4 and IPv6). They are attached to locally generated
packets that are transmitted out of the VRF ports (via the
l3mdev_l3_out() hook). Their purpose is to redirect packets towards the
VRF device instead of having the packets egress directly out of the VRF
ports. This is useful, for example, when a queuing discipline is
configured on the VRF device.
In order to avoid a NULL pointer dereference, commit b0e95ccdd7 ("net:
vrf: protect changes to private data with rcu") made the pointers to the
dst entries RCU protected. As far as I can tell, this was needed because
back then the dst entries were released (and the pointers reset to NULL)
before removing the VRF ports.
Later on, commit f630c38ef0 ("vrf: fix bug_on triggered by rx when
destroying a vrf") moved the removal of the VRF ports to the VRF
device's dellink() callback. As such, the tear down sequence of a VRF
device looks as follows:
1. VRF ports are removed.
2. VRF device is unregistered.
a. Device is closed.
b. An RCU grace period passes.
c. ndo_uninit() is called.
i. dst entries are released.
Given the above, the Tx path will always see the same fully initialized
dst entries and will never race with the ndo_uninit() callback.
Therefore, there is no need to make the pointers to the dst entries RCU
protected. Remove it as well as the unnecessary NULL checks in the Tx
path.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260326203233.1128554-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dst_dev_put() to clean up the device referenced by the dst entry
instead of partially open coding it. Internally, the helper uses the
blackhole device instead of the loopback device.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VRF driver always allocates an IPv4 dst entry for a VRF device and
prevents the device from being registered if the allocation fails.
Therefore, there is no need to check if the entry exists when tearing
down a VRF device. Remove the check.
Note that the same is not true for the IPv6 dst entry. Its creation can
be skipped if IPv6 is administratively disabled (i.e.,
'ipv6.disable=1').
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Laurent Pinchart says:
====================
net: stmmac: Disable EEE on i.MX
This small patch series fixes a long-standing interrupt storm issue with
stmmac on NXP i.MX platforms.
The initial attempt to fix^Wwork around the problem in DT ([1]) was
painfully but rightfully rejected by Russell, who helped me investigate
the issue in depth. It turned out that the root cause is a mistake in
how interrupts are wired in the SoC, a hardware bug that has been
replicated in all i.MX SoCs that integrate an stmmac. The only viable
solution is to disable EEE on those devices.
Individual patches explain the issue in more details. Patch 1/2,
authored by Russell, adds a new STMMAC_FLAG to disable EEE, and patch
2/2 sets the flag for i.MX platforms.
[1] https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
====================
Link: https://patch.msgid.link/20260325210003.2752013-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i.MX8MP suffers from an interrupt storm related to the stmmac and
EEE. A long and tedious analysis ([1]) concluded that the SoC wires the
stmmac lpi_intr_o signal to an OR gate along with the main dwmac
interrupts, which causes an interrupt storm for two reasons.
First, there's a race condition due to the interrupt deassertion being
synchronous to the RX clock domain:
- When the PHY exits LPI mode, it restarts generating the RX clock
(clk_rx_i input signal to the GMAC).
- The MAC detects exit from LPI, and asserts lpi_intr_o. This triggers
the ENET_EQOS interrupt.
- Before the CPU has time to process the interrupt, the PHY enters LPI
mode again, and stops generating the RX clock.
- The CPU processes the interrupt and reads the GMAC4_LPI_CTRL_STATUS
registers. This does not clear lpi_intr_o as there's no clk_rx_i.
An attempt was made to fixing the issue by not stopping RX_CLK in Rx LPI
state ([2]). This alleviates the symptoms but doesn't fix the issue.
Since lpi_intr_o takes four RX_CLK cycles to clear, an interrupt storm
can still occur during that window. In 1000T mode this is harder to
notice, but slower receive clocks cause hundreds to thousands of
spurious interrupts.
Fix the issue by disabling EEE completely on i.MX8MP.
[1] https://lore.kernel.org/all/20251026122905.29028-1-laurent.pinchart@ideasonboard.com/
[2] https://lore.kernel.org/all/20251123053518.8478-1-laurent.pinchart@ideasonboard.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260325210003.2752013-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms have problems when EEE is enabled, and thus need a way
to disable stmmac EEE support. Add a flag before the other LPI related
flags which tells stmmac to avoid populating the phylink LPI
capabilities, which causes phylink to call phy_disable_eee() for any
PHY that is attached to the affected phylink instance.
iMX8MP is an example - the lpi_intr_o signal is wired to an OR gate
along with the main dwmac interrupts. Since lpi_intr_o is synchronous
to the receive clock domain, and takes four clock cycles to clear, this
leads to interrupt storms as the interrupt remains asserted for some
time after the LPI control and status register is read.
This problem becomes worse when the receive clock from the PHY stops
when the receive path enters LPI state - which means that lpi_intr_o
can not deassert until the clock restarts. Since the LPI state of the
receive path depends on the link partner, this is out of our control.
We could disable RX clock stop at the PHY, but that doesn't get around
the slow-to-deassert lpi_intr_o mentioned in the above paragraph.
Previously, iMX8MP worked around this by disabling gigabit EEE, but
this is insufficient - the problem is also visible at 100M speeds,
where the receive clock is slower.
There is extensive discussion and investigation in the thread linked
below, the result of which is summarised in this commit message.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Closes: https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://patch.msgid.link/20260325210003.2752013-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_gd_ring_doorbell() accesses offsets up to DOORBELL_OFFSET_EQ
(0xFF8) + 8 bytes = 4KB within each doorbell page. A db_page_size
smaller than SZ_4K is fundamentally incompatible with the driver:
doorbell pages would overlap and the device cannot function correctly.
Validate db_page_size at the source and fail the
probe early if the value is below SZ_4K. This ensures the doorbell ID
range check in mana_gd_register_device() can rely on db_page_size
being valid.
Fixes: 89fe91c659 ("net: mana: hardening: Validate doorbell ID from GDMA_REGISTER_DEVICE response")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260325180423.1923060-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert confirm_rx to little endian when enqueueing and convert it back on
receive. This fixes control flow on big endian hosts, little endian is
unaffected.
On transmit, store confirm_rx as __le32 using cpu_to_le32(). On receive,
apply le32_to_cpu() before using the value. !! ensures the value is 0 or 1
in native endianness, so the conversion isn’t strictly required here, but
it is kept for consistency and clarity.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: stmmac: remove unused and unimplemented AXI properties
commit afea03656a ("stmmac: rework DMA bus setting and introduce new
platform AXI structure") added support for parsing all the stmmac AXI
attributes, and added code to set most of the appropriate register bits
with three exceptions:
snps,kbbe
snps,mb
snps,rb
These were parsed by the driver, but the result of parsing was never
used by any of the cores.
Moreover, no DTS in the kernel makes use of these properties.
Thus, it doesn't make sense for the driver to parse these, so let's
remove them. Also remove them from the DT binding document.
====================
Link: https://patch.msgid.link/acJh4z3pRKkeaFbR@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the AXI snps,kbbe snps,mb and snps,rb properties as they have
not been used, and although the driver parses these, the code hasn't
ever used the parsed result. This parsing has now been removed.
These were introduced by commit afea03656a ("stmmac: rework DMA bus
setting and introduce new platform AXI structure").
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/E1w4ydt-0000000Dlph-3WvI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
axi_kbbe, axi_mb and axi_rb are all written, but nothing ever reads
their values. Remove the code that sets these and the struct members.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w4ydo-0000000Dlpb-34jd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Negotiating VIRTIO_NET_F_CTRL_GUEST_OFFLOADS indicates the device
allows control over offload support, but the offloads that can be
controlled may have nothing to do with GRO (e.g., if neither GUEST_TSO4
nor GUEST_TSO6 is supported).
In such a setup, reporting NETIF_F_GRO_HW as available for the device
is too optimistic and misleading to the user.
Improve the situation by masking off NETIF_F_GRO_HW unless the device
possesses actual GRO-related offload capabilities. Out of an abundance
of caution, this does not change the current behaviour for hardware with
just v6 or just v4 GRO: current interfaces do not allow distinguishing
between v6/v4 GRO, so we can't expose them to userspace precisely.
Signed-off-by: Di Zhu <zhud@hygon.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20260323041730.986351-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While net/ipv4/tcp_yeah.c is correctly setting .cwnd_event_tx_start
to tcp_vegas_cwnd_event_tx_start(), I forgot to do the same in tcp_vegas.c
Fixes: d1e59a4697 ("tcp: add cwnd_event_tx_start to tcp_congestion_ops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260325212440.4146579-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
receive_buf() reads the virtio header through buf before
page_pool_dma_sync_for_cpu() runs in receive_small() or
receive_mergeable(). The header buffer is thus unsynchronized at the
point where flags and, for mergeable buffers, num_buffers are consumed.
Omar Elghoul reported that on s390x Secure Execution this showed up as
greatly reduced virtio-net performance together with "bad gso" and
"bad csum" messages in dmesg. This is because with SE sync actually
copies data, so the header is uninitialized.
Move the sync into receive_buf() so the
header is synchronized before any access through buf.
Tool use: Cursor with GPT-5.4 drafted the initial code move from prompt:
"in drivers/net/virtio_net.c, move page_pool_dma_sync_for_cpu on receive
path to before memory is accessed through buf".
The result and the commit log were reviewed and edited manually.
Fixes: 24fbd3967f ("virtio_net: add page_pool support for buffer allocation")
Reported-by: Omar Elghoul <oelghoul@linux.ibm.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Omar Elghoul <oelghoul@linux.ibm.com>
Link: https://lore.kernel.org/r/20260323150136.14452-1-oelghoul@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vishwanath Seshagiri <vishs@meta.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/f4caa9be9e5addae7851c012cab0a733be7f0974.1774365273.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: dsa: microchip: Small cleanups for ksz9477 SGMII
While working with ksz9477, I've done some very minor cleanups around the
PCS code for the SGMII port. No changes intended.
====================
Link: https://patch.msgid.link/20260324180826.524327-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SGMII support has been added to ksz9477, we can drop the comment saying
that it'll be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops .pcs_create() is called under the assumption that the
switch has a PCS port :
if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) {
ret = dev->dev_ops->pcs_create(dev);
[...]
}
The KSZ9477 implementation of .pcs_create() does the same check on
ksz_has_sgmii_port(), and protects the entire function with it.
Drop it, saving a level of indentation and increasing readability.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address "grep: warning: stray \ before white space" warning from GNU
grep 3.12. This warns the misplaced backslashes before whitespaces
(e.g. \\' ' or '\ ') which leads to unspecified behavior [1].
We can just remove the backslashes before whitespaces as POSIX says:
Enclosing characters in single-quotes ('') shall preserve the literal
value of each character within the single-quotes.
and bourne-compatible shells behave so.
[1]: https://lists.gnu.org/r/bug-gnulib/2022-05/msg00057.html
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/dd0bbd48cdf468da56ec34fd61cecd4d2111d7ba.1774372510.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, we incorrectly send messages that are within 4 bytes (a
struct mctp_hdr) smaller than the MTU through mctp_do_fragment_route().
This has no effect on the actual fragmentation, as we will still send as
one packet, but unnecessarily copies the original skb into a new
single-fragment skb.
Instead of having the MTU comparisons in both mctp_local_output() and
mctp_do_fragment_route(), feed all local messages through the latter,
and add the single-packet optimisation there.
This means we can coalesce the routing path of mctp_local_output, so our
out_release path is now solely for errors, so rename the label
accordingly.
Include a check in the route tests for the single-packet case too.
Reported-by: yuanzhaoming <yuanzm2@lenovo.com>
Closes: 269936db5e (r175836230)
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260324-dev-mtu-copy-v1-1-7af6bd7027d3@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Iurman says:
====================
Add support for per-route seg6 tunsrc
This series adds support for the new per-route seg6 "tunsrc" parameter.
Selftests are extended to make sure it works as expected.
Example with the iproute2-next companion patch:
ip -6 r a 2001:db8:1::/64 encap seg6 mode encap tunsrc 2001:db8:ab::
segs 2001:db8:42::1,2001:db8:ffff::2 dev eth0
====================
Link: https://patch.msgid.link/20260324091434.359341-1-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend srv6_hencap_red_l3vpn_test.sh to include checks for the new
"tunsrc" feature. If there is no support for tunsrc, it silently
falls back to the encap config without tunsrc.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-3-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add SEG6_IPTUNNEL_SRC in the uapi for users to configure a specific
tunnel source address. Make seg6_iptunnel handle the new attribute
correctly. It has priority over the configured per-netns tunnel
source address, if any.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-2-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests in phylink_expects_phy() and phylink_fwnode_phy_connect() are
identical (by intention). Use phylink_expects_phy() to decide whether
to ignore a call to phylink_fwnode_phy_connect().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1w4zHg-0000000DmC4-2oyb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: stmmac: dwmac-socfpga: Cleanup .fix_mac_speed
This small series does a bit of cleanup in the dwmad-socfpga glue
driver, especially around the .fix_mac_speed() operation.
It's mostly about re-using existing helpers from the glue driver, as
well as reorganizing the code to make the local private structures a
little bit smaller.
No functionnal changes are intended, this was tested on cyclone V.
====================
Link: https://patch.msgid.link/20260324092102.687082-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We keep a reference to our the struct device in the socfpga_dwmac priv
structure, but now it's only ever used to produce logs in the
.set_phy_mode() ops, that are specific to this driver.
When we call that ops, we always have a ref to the struct device around,
so let's pass it to .set_phy_mode(). We can now discard that reference
from struct socfpga_dwmac.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260324092102.687082-6-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We enable/disable the sgmii_adapter in the .fix_mac_speed() ops based on
the phy_mode used in the plat_data. We currently get it with :
socfpga_dwmac
->dev
->drv_data
->netdev
->priv
->stmmac_priv
->plat
->phy_interface
where we can get it with :
socfpga_dwmac
->plat_data
->phy_interface (done by socfpga_get_plat_phymode)
Use that helper here.
Note that we are also being passed a phy_interface_t from the
.fix_mac_speed() callback, provided by phylink.
We can handle that in the future when dynamic interface selection is
supported. We'd need to guarantee that we have a Lynx PCS to handle it.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260324092102.687082-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The internal helper socfpga_get_plat_phymode() returns an int where we
actually return a PHY_INTERFACE_MODE_xxx, use the correct type for this.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260324092102.687082-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the existing socfpga_sgmii_config() helper in
socfpga_dwmac_fix_mac_speed(), instead of re-coding the register access.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260324092102.687082-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is preparatory work to allow reusing the SGMII configuration helper
and the wrapper to get the interface in the fix_mac_speed() callback.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260324092102.687082-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmnFTegACgkQ10qiO8sP
aABpghAAmcubFELG/ivDfwujEXjeKRU4CGcFPWDnOwBo28w8bQ36SoKRh251BUSL
4XCEwZwPR2gFI77bJ7fLn1gsRNd8Cv+t8wsi2K3TV3bOy6wCxH85A7l4GmN5vGzP
9MLcAAT7R684YAC4gFAi3DqFmSucd/ZodAt93Cw7+ikXq2tvrbR5wgUv9AQ5mUIw
f5cqocOOv+4IbSL+r2cQnCAKLGWxVMJpoiWuAPpIQn7odcrncrhvBIG3l9ZC4KOL
BKiO+YpK8Yg3+uc9zrz+RwOcQx6TjzgAydFY/AnqOmGfQ2dGaWC/zy/5stCOVrfd
mAqw4jr14eAumUoHQoNrOBsWikuDBKmYMjHVObR3cKB9jJ/54CHtSYJVueg9gdhP
4+s5lNkX0zEt76wimYQRpCkYhalBUZMwUv3HFnab99PDDmWvNFS8uHi8i2g7U81i
yVdxI3MbQp2SRgJMDbKQPziSad1qJyIzg/LoN9fb6GV1DoNZ3IZabgVMOA2IoB0L
zYi3Yuyo63yhDh2Np9uzDsIRQAbTCdbou2fzPqy6CvOyG6JXxCI8PZpZAN7dqYxc
u8rljjaxQ4IYfBWrryFdHzIrYHJLo/B4g8kSFE+vzLiFblFmTxBoziHDWpJ4u5im
YTyOyBYAtzQf0l8cZPKzRq+AuVgIuJVNV/3zyxnoFxfqg/lUWNk=
=zap4
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joey Lu says:
====================
Add support for Nuvoton MA35D1 GMAC
This patch series is submitted to add GMAC support for Nuvoton MA35D1
SoC platform. This work involves implementing a GMAC driver glue layer
based on Synopsys DWMAC driver framework to leverage MA35D1's dual GMAC
interface capabilities.
Overview:
1. Added a GMAC driver glue layer for MA35D1 SoC, providing support for
the platform's two GMAC interfaces.
2. Added device tree settings, with specific configurations for our
development boards:
a. SOM board: Configured for two RGMII interfaces.
b. IoT board: Configured with one RGMII and one RMII interface.
3. Added dt-bindings for the GMAC interfaces.
====================
Link: https://patch.msgid.link/20260323101756.81849-1-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Gigabit Ethernet on Nuvoton MA35 series using dwmac driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260323101756.81849-4-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create initial schema for Nuvoton MA35 family Gigabit MAC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260323101756.81849-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Notably, this includes the fix for the Bluetooth regression that you
were notified about. I'm not aware of any other pending regressions.
Current release - regressions:
- bluetooth:
- fix stack-out-of-bounds read in l2cap_ecred_conn_req
- fix regressions caused by reusing ident
- netfilter: revisit array resize logic
- eth: ice: set max queues in alloc_etherdev_mqs()
Previous releases - regressions:
- core: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
- bluetooth:
- fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
- fix deadlock in l2cap_conn_del()
- sched: codel: fix stale state for empty flows in fq_codel
- ipv6: remove permanent routes from tb6_gc_hlist when all exceptions expire.
- xfrm: fix skb_put() panic on non-linear skb during reassembly
- openvswitch:
- avoid releasing netdev before teardown completes
- validate MPLS set/set_masked payload length
- eth: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
Previous releases - always broken:
- bluetooth: fix null-ptr-deref on l2cap_sock_ready_cb
- udp: fix wildcard bind conflict check when using hash2
- netfilter: fix use of uninitialized rtp_addr in process_sdp
- tls: Purge async_hold in tls_decrypt_async_wait()
- xfrm:
- prevent policy_hthresh.work from racing with netns teardown
- fix skb leak with espintcp and async crypto
- smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
- can:
- add missing error handling to call can_ctrlmode_changelink()
- fix OOB heap access in cgw_csum_crc8_rel()
- eth: mana: fix use-after-free in add_adev() error path
- eth: virtio-net: fix for VIRTIO_NET_F_GUEST_HDRLEN
- eth: bcmasp: fix double free of WoL irq
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kySL
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, CAN, IPsec and Netfilter.
Notably, this includes the fix for the Bluetooth regression that you
were notified about. I'm not aware of any other pending regressions.
Current release - regressions:
- bluetooth:
- fix stack-out-of-bounds read in l2cap_ecred_conn_req
- fix regressions caused by reusing ident
- netfilter: revisit array resize logic
- eth: ice: set max queues in alloc_etherdev_mqs()
Previous releases - regressions:
- core: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
- bluetooth:
- fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
- fix deadlock in l2cap_conn_del()
- sched: codel: fix stale state for empty flows in fq_codel
- ipv6: remove permanent routes from tb6_gc_hlist when all exceptions expire.
- xfrm: fix skb_put() panic on non-linear skb during reassembly
- openvswitch:
- avoid releasing netdev before teardown completes
- validate MPLS set/set_masked payload length
- eth: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
Previous releases - always broken:
- bluetooth: fix null-ptr-deref on l2cap_sock_ready_cb
- udp: fix wildcard bind conflict check when using hash2
- netfilter: fix use of uninitialized rtp_addr in process_sdp
- tls: Purge async_hold in tls_decrypt_async_wait()
- xfrm:
- prevent policy_hthresh.work from racing with netns teardown
- fix skb leak with espintcp and async crypto
- smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
- can:
- add missing error handling to call can_ctrlmode_changelink()
- fix OOB heap access in cgw_csum_crc8_rel()
- eth:
- mana: fix use-after-free in add_adev() error path
- virtio-net: fix for VIRTIO_NET_F_GUEST_HDRLEN
- bcmasp: fix double free of WoL irq"
* tag 'net-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (90 commits)
net: macb: use the current queue number for stats
netfilter: ctnetlink: use netlink policy range checks
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
netfilter: nf_conntrack_expect: store netns and zone in expectation
netfilter: ctnetlink: ensure safe access to master conntrack
netfilter: nf_conntrack_expect: use expect->helper
netfilter: nf_conntrack_expect: honor expectation helper field
netfilter: nft_set_rbtree: revisit array resize logic
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
tls: Purge async_hold in tls_decrypt_async_wait()
selftests: netfilter: nft_concat_range.sh: add check for flush+reload bug
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
Bluetooth: btusb: clamp SCO altsetting table indices
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
Bluetooth: L2CAP: Fix send LE flow credits in ACL link
net: mana: fix use-after-free in add_adev() error path
...
- Implement .get_direction() in the spmi-gpio gpio_chip.
Recent changes makes this start to print warnings and it's
not nice, let's just fix it.
- Clamp the return value of gpio_get() in the Renesas
RZA1 driver.
- Add the GPIO_GENERIC dependency to the STM32 HDP driver.
- Modify the Mediatek driver to accept devices that do not
use external interrupts (EINT) at all.
- Fix flag propagation in the Sunxi driver, so that we can fix
an issue with uninitialized pins in a follow-up patch using
said flags.
-----BEGIN PGP SIGNATURE-----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=Ay1e
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Implement .get_direction() in the spmi-gpio gpio_chip
Recent changes makes this start to print warnings and it's not nice,
let's just fix it
- Clamp the return value of gpio_get() in the Renesas RZA1 driver
- Add the GPIO_GENERIC dependency to the STM32 HDP driver
- Modify the Mediatek driver to accept devices that do not use external
interrupts (EINT) at all
- Fix flag propagation in the Sunxi driver, so that we can fix an issue
with uninitialized pins in a follow-up patch using said flags
* tag 'pinctrl-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: fix gpiochip_lock_as_irq() failure when pinmux is unknown
pinctrl: sunxi: pass down flags to pinctrl routines
pinctrl: mediatek: common: Fix probe failure for devices without EINT
pinctrl: stm32: fix HDP driver dependency on GPIO_GENERIC
pinctrl: renesas: rza1: Normalize return value of gpio_get()
pinctrl: qcom: spmi-gpio: implement .get_direction()
pinctrl: renesas: rzt2h: Fix invalid wait context
pinctrl: renesas: rzt2h: Fix device node leak in rzt2h_gpio_register()
