mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,482,898 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Felix Gu
|
add916cfce |
drm/bridge: th1520-dw-hdmi: Fix error check on dw_hdmi_probe() return value
The error check after calling dw_hdmi_probe() was incorrectly checking
the struct pointer hdmi instead of the probe result hdmi->dw_hdmi.
Fix this by checking the correct variable.
Fixes:
|
||
Wentao Liang
|
b816da5d5d |
drm/vc4: Fix firmware reference leak in vc4_drm_bind()
The firmware reference obtained via rpi_firmware_get() is leaked when
aperture_remove_all_conflicting_devices() fails, as the error label
returns without putting it. This happens before the firmware is
consumed and put further down in the function.
Put the firmware reference before jumping to err.
Fixes:
|
||
Fan Wu
|
94cf5971b1 |
drm/vc4: drain the hangcheck timer and works on V3D unbind
Nothing stops the hangcheck timer that submitted jobs arm, or the
job_done_work that the render-done interrupt queues, at teardown:
vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy()
runs from the drm-managed release, after vc4_v3d_unbind() has already
uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed
by then reads V3D registers through the NULL vc4->v3d pointer, and the
late callbacks run on the vc4_dev embedding them after it has been
freed.
Drain them in vc4_v3d_unbind(): shut the timer down and cancel
reset_work before the interrupt is taken down, because its
vc4_irq_reset() re-enables it, then flush job_done_work so that
completions queued at teardown still release their jobs.
This issue was found by an in-house static analysis tool.
Fixes:
|
||
Pengpeng Hou
|
45585c3aa2 |
drm/imagination: clamp freelist reconstruction requests
The firmware reconstruction count controls accesses to the request's
fixed freelist ID array and the copy into the fixed response array.
Neither access currently bounds the count to those protocol arrays.
Clamp the count to the request capacity, which is shared by the response
layout, and use that count consistently for reconstruction and response
publication. Keep the firmware recovery exchange instead of dropping an
oversized request without a response, as discussed with the firmware
maintainer.
The issue was found by our static-analysis tool.
Fixes:
|
||
Brajesh Gupta
|
0a8224058a |
drm/imagination: Fix page count for page table for map() interface
The GPU virtual start address wasn't included in the calculation for the
amount of page tables required for mapping a BO object in map() interface.
It resulted in map failure later due to not enough pages at L0/L1 level.
Update pvr_mmu_op_context_create() interface to pass device address as well
to allow correct calculation for page table memory.
If L0 tables cover 2MB (0x200000), the range defined by device address
0x80001ff000 (general heap at 2MB - 4KB) and size 0x2000 (two 4KB pages)
requires two L0 pages to be mapped, but without the base
address a range of 0x2000 computes to a single L0 page which is not enough.
Fixes:
|
||
|
Brajesh Gupta
|
7b824c293a |
drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl()
Map failure from pvr_mmu_map_sgl() interface was not returned correctly
to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to
continue instead of returning an error to caller.
Fix it by returning a proper error code from pvr_mmu_map_sgl() interface.
Call stack for crash:
[ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 1179.295067] Mem abort info:
[ 1179.297877] ESR = 0x0000000096000004
[ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1179.306987] SET = 0, FnV = 0
[ 1179.310048] EA = 0, S1PTW = 0
[ 1179.313198] FSC = 0x04: level 0 translation fault
[ 1179.318096] Data abort info:
[ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000
[ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP
[ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6
[ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT
[ 1179.388120] Tainted: [D]=DIE
[ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT)
[ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr]
[ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr]
[ 1179.416848] sp : ffff8000839ab8c0
[ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000
[ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6
[ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247
[ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002
[ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480
[ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8
[ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007
[ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000
[ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000
[ 1179.491433] Call trace:
[ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P)
[ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr]
[ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr]
[ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm]
[ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm]
[ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr]
[ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr]
[ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr]
[ 1179.534018] drm_ioctl_kernel+0xb8/0x128
[ 1179.537941] drm_ioctl+0x21c/0x4ec
[ 1179.541337] __arm64_sys_ioctl+0xac/0x108
[ 1179.545344] invoke_syscall+0x44/0x100
[ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0
[ 1179.553790] do_el0_svc+0x1c/0x28
[ 1179.557106] el0_svc+0x34/0xf0
[ 1179.560159] el0t_64_sync_handler+0xd0/0xe4
[ 1179.564334] el0t_64_sync+0x198/0x19c
[ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421)
[ 1179.574081] ---[ end trace 0000000000000000 ]---
Fixes:
|
||
Jakub Pawlak
|
72b782097e |
accel/ivpu: Use separate flag for job timeout
Use separate flag to mark a job timeout as a reason
of starting context_abort_work. This allows to distinguish
engine reset reason and clearly adjust reset procedure flow.
The flag is cleared in ivpu_prepare_for_reset(), which every
recovery and suspend path already funnels through, so that the
state is clean after recovery.
Cc: stable@vger.kernel.org # v7.1+
Fixes:
|
||
Li Youhong
|
ada6678907 |
drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach
When the Exynos DSI driver was generalized into samsung-dsim, the TE
GPIO acquisition was switched from gpiod_get_optional() to
devm_gpiod_get_optional() while keeping the matching gpiod_put() calls.
That combination is wrong for a managed descriptor.
However, dropping the puts and keeping the managed get is also wrong:
samsung_dsim_register_te_irq() runs from the DSI host attach callback,
and host detach/reattach can happen without destroying the device that
owns the managed action. A second attach would then request the GPIO
again without having released it.
Switch back to a non-managed gpiod_get_optional() and keep the explicit
gpiod_put() on the request_irq() error path and in
samsung_dsim_unregister_te_irq().
Fixes:
|
||
Benjamin Leggett
|
598c1c3e89 |
drm/virtio: sync shmem backing on guest-bound transfers
virtio_gpu_cmd_transfer_to_host_{2d,3d}() sync the shmem backing for the
device before the transfer, but nothing syncs for the CPU when a transfer
runs the other way. That breaks two ways. Where the DMA layer bounces, the
device writes into the bounce buffer while the guest keeps reading the
original pages. Where DMA is not coherent, the device writes memory while
the CPU keeps stale cache lines, because nothing reaches
arch_sync_dma_for_cpu(). Either way DRM_IOCTL_VIRTGPU_TRANSFER_FROM_HOST
hands back stale data.
Sashiko originally found this in
https://lore.kernel.org/dri-devel/20260806231002.27B4D1F000E9@smtp.kernel.org
but the suggestion there to fix this with dma_sync_sgtable_for_cpu()
isn't a sufficient fix, for two reasons.
- The transfer is asynchronous. virtio_gpu_cmd_transfer_from_host_3d() only
queues the command, so a sync there would run before the device had written
anything. It belongs on completion, and ahead of any fence signalling.
A waiter woken by the fence would otherwise race the sync and read the
backing pages regardless. It needs its own pass over the reclaim list
rather than a step inside the existing one, because
virtio_gpu_fence_event_process() also signals every earlier fence in the
same context, so any entry in that loop may signal an earlier entry's
fence.
- The transfer is also partial, carrying an offset, a level and a box.
Where the mapping bounces, a sync for the CPU copies the whole mapping
back, so unless the mapping is primed first the regions the device did not
write come back holding whatever the bounce buffer contained, discarding
data the guest owned.
So the fix: Prime the mapping before queueing, tag the vbuffer, and sync
for the CPU on completion before the fence is signalled.
A second transfer must not snapshot the mapping while an earlier one is
still in flight, or the snapshot would predate whatever the CPU wrote once
the earlier fence signalled and the later sync would discard it.
To mitigate this, wait for outstanding fences under the reservation before
priming.
Neither sync copies anything unless the mapping genuinely bounces:
swiotlb_sync_single_for_cpu() and its Xen counterpart look the address up
in the bounce pool and return early when it is absent. On a platform with
non-coherent DMA they still perform the necessary cache maintenance.
The range cannot be narrowed to the box, since for a non-blob resource
virtio_gpu_transfer_from_host_ioctl() rejects a caller-supplied stride and
layer_stride, leaving the layout to the host and the guest with no way to
work out which bytes the device writes. A host3d guest blob does carry
both, so its extent could be bounded, but the sync is left whole there too
rather than special-cased: priming makes the untouched regions round-trip
unchanged either way.
Behaviour changes worth noting:
- TRANSFER_FROM_HOST can now block, where before it returned as soon as the
command was queued. Repeated readbacks of one resource serialise, and a
readback can wait behind an earlier queued command that touched it, since
virtio_gpu_array_add_fence() tags uploads, execbufs and plane flushes
alike with DMA_RESV_USAGE_WRITE. -ERESTARTSYS was already possible here
via dma_resv_lock_interruptible().
- A CPU write racing an in-flight transfer to the same resource is now
lost, where before it survived and the transfer was lost instead. Priming
captures the pages as of queueing, so a write landing before completion is
overwritten by the sync.
- TRANSFER_TO_HOST can also block now, but only while a guest-bound
transfer on the same resource is outstanding, which happens only for
callers that issue both without waiting.
- Where a batch of completions contains a guest-bound transfer, the sync
pass delays fence signalling for the whole batch. Only bounced pages are
copied and the swiotlb pool bounds it. A batch with no such transfer is
unaffected.
Tested under QEMU on x86 with swiotlb=force and virtio-vga-gl
iommu_platform=on, which forces both preconditions required to hit the
original bug.
Fixes:
|
||
Shixiong Ou
|
6947b78df4 |
drm/virtio: Add pixel blend mode property to cursor plane
The cursor plane exposes a format with an alpha channel (DRM_FORMAT_ARGB8888) without a pixel blend mode property. Since commit |
||
Peiyang He
|
846b3c64fe |
drm/virtio: fix NULL pointer dereference on fence allocation failure
virtio_gpu_fence_alloc() can fail due to memory pressure and return NULL,
but its caller like virtio_gpu_init_submit() never checks it. Later,
virtio_gpu_init_submit() passes the NULL fence to
virtio_gpu_fence_event_create(), which unconditionally dereferences it.
Found when fuzzing the virtio driver with Syzkaller:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 1 UID: 0 PID: 9991 Comm: syz.0.121 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R0virtio_gpu_virgl_process_cmd: ctrl 0x102, error 0x1203
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff8880eb6e9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effbf5e55a8 CR3: 0000000048d19000 CR4: 0000000000350ef0
Call Trace:
<TASK>
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fab471a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fab480b9018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fab47435fa0 RCX: 00007fab471a82bd
RDX: 00002000000000c0 RSI: 00000000c0406442 RDI: 0000000000000003
RBP: 00007fab480b9080 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007fab47436038 R14: 00007fab47435fa0 R15: 00007ffe85ab0740
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:295 [inline]
RIP: 0010:virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
RIP: 0010:virtio_gpu_execbuffer_ioctl+0xc78/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
Code: 85 ed 0f 85 21 09 00 00 e8 05 5a c9 fb 48 8b 44 24 10 48 8d b8 90 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 0d 00 00 48 8b 44 24 10 4c 89 b0 90 00 00 00
RSP: 0018:ffffc900039dfad0 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: ffffc900039dfdd8 RCX: ffffffff85f6fd3d
RDX: 0000000000000012 RSI: ffffffff85f6fd4b RDI: 0000000000000090
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880132c4000
R13: 0000000000000000 R14: ffff888073b6c700 R15: 000000000000003b
FS: 00007fab480b96c0(0000) GS:ffff888098ae9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f24c3759000 CR3: 0000000048d19000 CR4: 0000000000350ef0
----------------
Code disassembly (best guess):
0: 85 ed test %ebp,%ebp
2: 0f 85 21 09 00 00 jne 0x929
8: e8 05 5a c9 fb call 0xfbc95a12
d: 48 8b 44 24 10 mov 0x10(%rsp),%rax
12: 48 8d b8 90 00 00 00 lea 0x90(%rax),%rdi
19: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
20: fc ff df
23: 48 89 fa mov %rdi,%rdx
26: 48 c1 ea 03 shr $0x3,%rdx
* 2a: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction
2e: 0f 85 9a 0d 00 00 jne 0xdce
34: 48 8b 44 24 10 mov 0x10(%rsp),%rax
39: 4c 89 b0 90 00 00 00 mov %r14,0x90(%rax)
Fix by checking virtio_gpu_fence_alloc() in virtio_gpu_init_submit() and
returning -ENOMEM before any later code can dereference the NULL fence.
Fixes:
|
||
Dmitry Osipenko
|
1e3b08de63 |
Revert "drm/virtio: Allow importing prime buffers when 3D is enabled"
Guest userspace may import udmabuf to vrend. Vrend doesn't support guest
blobs, and thus, further 3d operations with the imported blob are failing.
Typical scenario of the problem shown with mouse cursor RGBA image imported
into virtio-gpu, which previously was rejected by virtio-gpu driver.
Revert enabling guest blobs importing into vrend to fix the regression.
Link: https://gitlab.freedesktop.org/virgl/virglrenderer/-/work_items/674
Fixes:
|
||
Junrui Luo
|
036d28db18 |
drm/virtio: release the GEM object on virtio_gpu_vram_create() errors
virtio_gpu_vram_create() frees the object with a bare kfree(vram) on
both error paths after drm_gem_private_object_init() has run, and on the
second one after drm_gem_create_mmap_offset() has linked obj->vma_node
into the device's VMA offset manager. The freed object stays in that
interval tree, so a later lookup or insertion walks freed memory, and
the dma_resv and gpuva lock are never destroyed.
Call drm_gem_object_release() before kfree() on both paths.
Fixes:
|
||
|
Junrui Luo
|
24b6d5c764 |
drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl()
virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on
both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create()
error paths instead of dropping the reference it owns, so
obj->funcs->free() never runs and the virtio_gpu_object, the resource id
and the host-side resource are leaked.
Use drm_gem_object_put() instead.
Fixes:
|
||
|
Junrui Luo
|
477bc3068f |
drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl()
virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the
drm_gem_handle_create() error path instead of dropping the reference it
owns, so obj->funcs->free() never runs and the virtio_gpu_object, its
pages and sg table, the resource id and the host-side resource are
leaked.
Use drm_gem_object_put() instead.
Fixes:
|
||
|
Junrui Luo
|
36570ef224 |
drm/virtio: fix object leak when drm_gem_handle_create() fails
virtio_gpu_gem_create() owns the reference taken by
virtio_gpu_object_create(). On the drm_gem_handle_create() error path it
calls drm_gem_object_release() instead of dropping that reference.
drm_gem_object_release() is the inverse of drm_gem_object_init() and does
not touch the reference count or call obj->funcs->free(), so it is only
correct as the last step of a destructor, as in
virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1
with no remaining reference, so virtio_gpu_free_object() never runs and
the shmem pages, sg table and virtio_gpu_object are leaked. Since
virtio_gpu_object_create() has already set bo->created,
VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side
resource and the resource id.
drm_gem_handle_create_tail() drops the handle reference on all of its
internal error paths, so the caller only has to drop its own. Use
drm_gem_object_put(), matching the success path below.
Fixes:
|
||
|
Peiyang He
|
b74aad23d9 |
drm/virtio: fix memory leak of fence event on execbuffer failure
virtio_gpu_execbuffer_ioctl() reserves a DRM event with
drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that
userspace has enabled polling for. virtio_gpu_init_submit() does this
before the BO handles, the command buffer, the syncobj arrays and the
in-fence are processed, so every later error path runs with the event
already pending, including plain argument validation failures such as an
invalid bo_handle or an in-syncobj that carries no fence.
On those paths, virtio_gpu_cleanup_submit() drops the out-fence without
cancelling the event. The fence is freed without ever having been emitted,
taking the only driver-side pointer to the event with it. Closing the DRM
file does not help. drm_events_release() unlinks pending events but
deliberately leaves the freeing to the driver's later drm_send_event(),
which never runs for an orphaned event, so the allocation is leaked
permanently.
Found when fuzzing the virtio driver with Syzkaller:
BUG: memory leak
unreferenced object 0xffff88802c176e80 (size 96):
comm "syz.1.367", pid 10561, jiffies 4294960122
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............
backtrace (crc e1973c6b):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4597 [inline]
slab_alloc_node mm/slub.c:4917 [inline]
__kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline]
virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix by cancelling and freeing the DRM event on the execbuffer error path
before dropping the fence. Clear the fence's event pointer after
cancellation so it does not retain a dangling pointer.
Fixes:
|
||
Giuseppe Ranieri
|
1717fcc5be |
drm/nouveau/disp: don't reject HDMI config on cards without SCDC
nv50_hdmi_enable() passes the sink's SCDC capability from its EDID
straight through to nvif_outp_hdmi(). On pre-Maxwell-2 cards there is no
hdmi->scdc callback, so nvkm_uoutp_mthd_hdmi() rejects the whole
configuration with -EINVAL, and nv50_hdmi_enable() returns before
hdmi->ctrl() runs and before the AVI and VSI infoframes are sent.
The result on such a card driving an SCDC-capable HDMI 2.0 sink is that
HDMI audio silently stops working. Video is unaffected, and nothing is
logged, which makes the failure hard to attribute.
SCDC is optional, and the hdmi->scdc() call further down is already
guarded against a missing callback. Requesting it on a card that cannot
do it need not invalidate the rest of the HDMI configuration, so drop
that term from the condition and let the existing guard skip SCDC alone.
Fixes:
|
||
|
Peiyang He
|
6a6870d307 |
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f12bac8594d
Code: Unable to access opcode bytes at 0x7f12bac85923.
RSP: 002b:00007f12b96e70d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007f12baf15fa8 RCX: 00007f12bac8594d
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00007f12baf15fac
RBP: 00007f12baf15fa0 R08: 00007f12baee8000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f12baf16038 R14: 0000000000000006 R15: 00007ffe2ed394b0
</TASK>
irq event stamp: 47867
hardirqs last enabled at (47883): [<ffffffff815cafc6>] __up_console_sem+0x66/0x70 kernel/printk/printk.c:347
hardirqs last disabled at (47892): [<ffffffff815cafab>] __up_console_sem+0x4b/0x70 kernel/printk/printk.c:345
softirqs last enabled at (47880): [<ffffffff81434277>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last enabled at (47880): [<ffffffff81434277>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last enabled at (47880): [<ffffffff81434277>] __irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735
softirqs last disabled at (47875): [<ffffffff81434277>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last disabled at (47875): [<ffffffff81434277>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last disabled at (47875): [<ffffffff81434277>] __irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735
Fix by calling ttm_bo_pin() only when the existing placement is compatible
with the new pin request. This matches the correct behavior in other DRM
drivers such as amdgpu_bo_pin() in amdgpu.
Cc: stable@vger.kernel.org
Fixes:
|
||
Francesco Magazzu
|
e5cccdafc8 |
drm/nouveau/clk: don't clobber reclock status when restoring volt/fan
nvkm_cstate_prog() reuses 'ret' for the voltage and fan-speed restore
calls it makes after reprogramming the clocks. Those calls almost always
succeed, so the status of the reclock itself is overwritten and the
function reports success even when clk->func->calc() or clk->func->prog()
failed. The converse is also true: a successful reclock is reported as an
error if the final restore call fails, even though that failure is only
logged and otherwise ignored.
The only consumer of the return value is the error message in
nvkm_pstate_work(), so in practice a failing reclock is simply never
reported. Nothing else changes, but a function that returns success on
failure is a trap for the next caller.
Keep the calc/prog status in 'ret' and use a separate local for the
restore calls.
Fixes:
|
||
|
Francesco Magazzu
|
7ca7b8b5f2 |
drm/nouveau/device: don't use the pstate cursor after the loop
nvkm_control_mthd_pstate_attr() looks up the pstate at the index supplied by userspace by walking clk->states, and then keeps using the list_for_each_entry cursor after the loop. This is not triggerable today: the function already rejects args->v0.state >= clk->state_nr before the loop, and clk->state_nr is kept in sync with the number of entries on clk->states, so the lookup always breaks on a real entry. Should the loop ever run to completion, the cursor would point at the list head rather than at a pstate, and the pstate->base.domain[] read and the walk of pstate->list that follow would read past it. Rather than leave that trap in place, track whether the entry was found and return -EINVAL if it was not, like the other lookup failures in this function. No functional change. Signed-off-by: Francesco Magazzu <postadelmaga@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patch.msgid.link/20260918131620.405133-4-postadelmaga@gmail.com |
||
|
Francesco Magazzu
|
866dbd17c3 |
drm/nouveau/clk: don't use the pstate cursor after the loop
nvkm_pstate_prog() walks clk->states looking for the entry at index 'pstatei' and then keeps using the list_for_each_entry cursor after the loop. This is not triggerable today: every caller clamps the index against clk->state_nr before calling, so the loop always breaks on a real entry. It is safe by virtue of what the callers happen to do, not by anything the function itself checks. Should a caller ever pass an index that is not on the list, the cursor would point at the list head rather than at a pstate, and the pstate->base.domain[] and pstate->fanspeed accesses that follow would read past it. Rather than leave that trap in place for the next caller, track whether the entry was found and return -EINVAL if it was not. No functional change. Signed-off-by: Francesco Magazzu <postadelmaga@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patch.msgid.link/20260918131620.405133-3-postadelmaga@gmail.com |
||
Dan Carpenter
|
aff09d9e37 |
drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update
If list_for_each_entry() exits without hitting a break then "pstate" is
not a valid pstate pointer. Introduce a "found" variable instead.
The check is reachable from userspace: nvkm_clk_ustate_update() takes the
pstate id straight from the 'pstate' debugfs file, so requesting an id
that is not in clk->states - or any id at all when the perf tables are
broken and the list is empty - makes the pstate->pstate != req test
dereference the list head cast to a struct nvkm_pstate, which is an
out-of-bounds read.
Fixes:
|
||
Guangshuo Li
|
fefd9480ec |
drm/nouveau: fix autosuspend cleanup during teardown
nouveau_drm_device_init() calls pm_runtime_use_autosuspend(), but
nouveau_drm_device_fini() does not call the matching
pm_runtime_dont_use_autosuspend().
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the common
device teardown path.
This issue was found by manual code inspection.
Fixes:
|
||
Jonghyuk Kim(MalHyuk)
|
f7eae6d8d7 |
drm/nouveau: RCU-free the scheduler-containing nouveau_sched
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched->base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree().
Fixes:
|
||
|
Peiyang He
|
3359a372ef |
drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM
nouveau_uvmm_sm() calls op_map(), which passes bo->resource through
nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads
mem->mem.type.
But this is only valid when bo->resource is backed by struct nouveau_mem,
as is the case for VRAM and TT resources. If the BO is left in
TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it
as struct nouveau_mem makes the mem->mem.type read past the end of the
resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm
report:
BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline]
nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532
nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline]
nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364
drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061
process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322
process_scheduled_works kernel/workqueue.c:3405 [inline]
worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486
kthread+0x31d/0x420 kernel/kthread.c:436
ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 2224 on cpu 0 at 66.550027s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106
dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205
ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721
ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856
ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970
nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359
nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272
nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352
drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914
nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 2223 on cpu 0 at 66.554063s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x61/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
__rcu_free_sheaf_prepare+0xb6/0x2e0 mm/slub.c:2928
rcu_free_sheaf+0x1b/0x120 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645 [inline]
rcu_core+0x521/0x1490 kernel/rcu/tree.c:2897
handle_softirqs+0x1b1/0x8a0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
invoke_softirq kernel/softirq.c:496 [inline]
__irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735
irq_exit_rcu+0x9/0x20 kernel/softirq.c:752
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0x70/0x80 arch/x86/kernel/apic/apic.c:1062
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
The buggy address belongs to the object at ffff888127d3e380
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 32 bytes inside of
freed 96-byte region [ffff888127d3e380, ffff888127d3e3e0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127d3e
flags: 0x200000000000000(node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000000 ffff888100041280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000200020 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888127d3e280: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
ffff888127d3e300: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
>ffff888127d3e380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888127d3e400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888127d3e480: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
Fix by resetting the placement to the BO's valid domains before
calling nouveau_bo_validate(), matching the handling in
nouveau_uvmm_bo_validate(), so map jobs do not run for SYSTEM resources;
Reject BO that cannot reside in VRAM or GART;
Also skip op_map() when the GPUVA has been invalidated, matching the
handling in the unmap and remap paths.
Found when fuzzing the nouveau driver with a modified Syzkaller.
Fixes:
|
||
Lyude Paul
|
adb87c2008 |
drm/nouveau/gsp/r570: Enable Gcoff in fbsr again
Now that we're properly saving the compbit backing stores on fbsr init, we can start setting bEnteringGcOff = 1 again without things breaking, which brings us closer to following the exact same code-paths OpenRM does for fbsr. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260917185916.1089621-6-lyude@redhat.com |
||
|
Lyude Paul
|
82f4394bbe |
drm/nouveau/gsp/r570: Start saving comptag backing stores
One of the portions of OpenRM's fbsr process that we never implemented is the saving and restoring of comptag backing stores. This isn't strictly necessary for fbsr to work (as long as we don't specify bEnteringGcOff = 1), but implementing it brings us much closer to matching OpenRM's fbsr process - which means we can rely on things being well tested on Nvidia's side. Now that we have the required driver workarounds in place and fetch the required information from GSP's memsys on driver load, let's implement support for this by fetching the required space for the compbit backing stores and adding it to the amount of memory that we allocate for fbsr. With this, we should be able to safely enable bEnteringGcOff in fbsr. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260917185916.1089621-5-lyude@redhat.com |
||
|
Lyude Paul
|
c7ef611a43 |
drm/nouveau/gsp/r570: Add comp mode workaround from issue #3172217
One of the things that OpenRM does right before initiating fbsr is apply a special workaround (nvidia issue #3172217) which temporarily disables raw compression mode on the GPU. It is later re-enabled after resuming with fbsr completes. Since we don't currently save the compbit backing with fbsr, this shouldn't currently make any functional difference in the suspend/resume process. But it will be required for implementing support for saving and restoring compbit backings from the GPU. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260917185916.1089621-4-lyude@redhat.com |
||
|
Lyude Paul
|
3217000f0b |
drm/nouveau/gsp/r535: Add support for MEMSYS_GET_STATIC_CONFIG
This is a GSP structure describing various characteristics of the memory management system that GSP provides. Start by fetching it during driver load, but don't do anything with the information we get from it just yet. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260917185916.1089621-3-lyude@redhat.com |
||
|
Lyude Paul
|
cb4c760367 |
drm/nouveau/gsp/r570: Add support for INTERNAL_GCX_ENTRY_PREREQUISITE
OpenRM's runtime PM handling looks a bit different then nouveau's, one part in particular that differs from us: OpenRM actually consults GSP to ask whether the GPU should be allowed to enter Gc6 and/or GcOff before runtime suspending the GPU. In the event the card isn't ready, runtime suspend is simply delayed for a few seconds before retrying. Implement the command used for querying GSP about this, NV2080_CTRL_CMD_INTERNAL_GCX_ENTRY_PREREQUISITE, and check to ensure that the GPU is ready for runtime suspend in nouveau_pmops_runtime_suspend() using this query. If the GPU can't be runtime suspended, update the last busy counter of the device and then return -EBUSY from nouveau_pmops_runtime_suspend() - essentially delaying the runtime suspend process by whatever autosuspend_delay_ms is set to. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260917185916.1089621-2-lyude@redhat.com |
||
|
Junrui Luo
|
64ca4cdd10 |
drm/nouveau/dmem: pin VRAM for the whole registered range
Commit |
||
|
Peiyang He
|
97077ac87a |
drm/nouveau: fix double-free in nvif_vmm_dtor
On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear
the client down. Then, nouveau_drm_open() also enters into its
cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini()
calls nouveau_vmm_fini():
void
nouveau_vmm_fini(struct nouveau_vmm *vmm)
{
nouveau_svmm_fini(&vmm->svmm);
nvif_vmm_dtor(&vmm->vmm);
vmm->cli = NULL;
}
Inside nvif_vmm_dtor(), vmm->page is freed unconditionally:
void
nvif_vmm_dtor(struct nvif_vmm *vmm)
{
kfree(vmm->page);
nvif_object_dtor(&vmm->object);
}
vmm->page is never cleared after being freed, so the second call of
nvif_vmm_dtor() will cause a double-free.
Found by fuzzing the nouveau driver with a modified Syzkaller:
BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
Free of addr ffff888010fcdc30 by task syz.0.173/2567
CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557
check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235
kasan_slab_pre_free include/linux/kasan.h:199 [inline]
slab_free_hook mm/slub.c:2622 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x192/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6d687594d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d
RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c
RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760
</TASK>
Allocated by task 2567 on cpu 1 at 163.593900s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237
nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134
nouveau_cli_init+0x7b9/0xe10 drivers/gpu/drm/nouveau/nouveau_drm.c:293
nouveau_drm_open+0x236/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1243
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 2567 on cpu 1 at 163.601355s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x61/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x383/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_cli_init+0x593/0xe10 drivers/gpu/drm/nouveau/nouveau_drm.c:324
nouveau_drm_open+0x236/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1243
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888010fcdc30
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [ffff888010fcdc30, ffff888010fcdc40)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10fcd
flags: 0x100000000000000(node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000000 ffff88800d441640 dead000000000100 dead000000000122
raw: 0000000000000000 0000000000550055 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888010fcdb00: fc fc 00 04 fc fc fc fc fa fb fc fc fc fc fa fb
ffff888010fcdb80: fc fc fc fc fa fb fc fc fc fc 00 07 fc fc fc fc
>ffff888010fcdc00: fa fb fc fc fc fc fa fb fc fc fc fc fa fb fc fc
^
ffff888010fcdc80: fc fc fa fb fc fc fc fc 00 04 fc fc fc fc fa fb
ffff888010fcdd00: fc fc fc fc 00 00 fc fc fc fc fa fb fc fc fc fc
Fix by removing the redundant teardown in nouveau_drm_open(),
since nouveau_cli_init() already does the cleanup work.
Also clear vmm->page after its freeing.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Wentao Liang
|
1e04611d37 |
drm/nouveau: Fix runtime PM leak in nouveau_connector_detect()
If nvif_outp_edid_get() fails, nouveau_connector_detect() returns
early without dropping the runtime PM reference taken at the start
of the function, keeping the device powered on until the next
successful detect.
Balance the reference on the error path like the other exit paths
do.
Fixes:
|
||
|
Wentao Liang
|
5ea72f7b71 |
drm/nouveau: Fix gem reference leak in validate_init()
On the ttm_bo_reserve() failure and "vma not found" error paths, the
loop breaks without adding the looked-up object to any validate list,
so the reference taken by drm_gem_object_lookup() is never released;
validate_fini() only walks the spliced lists. Drop the reference
before breaking out on both paths.
Fixes:
|
||
|
Wentao Liang
|
67b4411538 |
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning.
Fixes:
|
||
shechenglong
|
1fca688e94 |
drm/client: fix restore of partially initialized client
I got a null-ptr-deref report when closing a DRM file descriptor:
WARNING: drivers/gpu/drm/drm_atomic.c:2031 at
__drm_atomic_helper_set_config+0x18e/0x1b0 [drm]
Call Trace:
drm_client_modeset_commit_atomic+0x16b/0x220 [drm]
drm_client_modeset_commit_locked+0x56/0x160 [drm]
drm_client_modeset_commit+0x21/0x40 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x7b/0x80
drm_fbdev_client_restore+0xe/0x20 [drm_client_lib]
drm_client_dev_restore+0x9f/0xc0 [drm]
drm_release+0xc5/0xe0 [drm]
The warning is followed by a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP:
__drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0x41/0x80
[drm_kms_helper]
Call Trace:
drm_fbdev_client_restore+0xe/0x20 [drm_client_lib]
drm_client_dev_restore+0x9f/0xc0 [drm]
drm_release+0xc5/0xe0 [drm]
__fput+0xdc/0x2b0
__x64_sys_close+0x39/0x80
do_syscall_64+0x8d/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
drm_client_register() adds the DRM client to the device client list
before invoking the initial hotplug callback. If the hotplug callback
fails, the client remains registered.
For the fbdev client, a failure during drm_fb_helper_initial_config()
causes the partially initialized fbdev helper to be cleaned up.
drm_fb_helper_fini() releases fb_helper->info and leaves it NULL.
The fbdev client therefore remains registered even though there is no
fully initialized framebuffer device.
Later, when userspace closes the DRM file descriptor, drm_release()
can invoke the restore callbacks of registered DRM clients:
drm_release()
drm_client_dev_restore()
drm_fbdev_client_restore()
drm_fb_helper_restore_fbdev_mode_unlocked()
drm_fbdev_client_restore() currently restores the fbdev state
unconditionally. For a partially initialized fbdev client this can
submit an incomplete modeset state and subsequently access fbdev
state which has not been initialized, resulting in the warning and
NULL pointer dereference above.
drm_fbdev_client_unregister() already uses fb_helper->info to
distinguish a fully probed framebuffer device from a partially
initialized client.
Use the same condition in drm_fbdev_client_restore() and skip restore
if no framebuffer device has been successfully initialized.
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
|
||
Huacai Chen
|
5535d5e61a |
drm/loongson: Create blend mode property for cursor plane
After commit
|
||
Icenowy Zheng
|
6c62dfd282 |
drm/verisilicon: remove ARGB formats from primary plane
As the blending of the primary plane is currently explicitly disabled (and it's not possible on DC8000), remove the ARGB formats from the primary plane format tables. Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260910095000.3505878-2-zhengxingda@iscas.ac.cn |
||
|
Icenowy Zheng
|
e5d43d7e92 |
drm/verisilicon: add primary modifier for format tables
Currently the format tables are only used for the primary plane. Add primary modifiers to names related to the tables. Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260910095000.3505878-1-zhengxingda@iscas.ac.cn |
||
|
Icenowy Zheng
|
5a83606d9f |
drm/verisilicon: set blend mode for the cursor plane
Blend mode properties are now required to expose pixel formats w/ alpha. Experiments show that the fixed blending mode for the cursor seems to be COVERAGE: - With a cursor plane filled with R=G=0, B=0xff, A=0x40, the cursor is visible on a pure-white background, which means the background is multiplied. - With a cursor plane filled with R=G=B=0xff, A=0x40, the cursor isn't pure white and non-white patterns can be see through, which means the cursor is multiplied. Add a fixed COVERAGE blend mode property for the cursor plane. Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260910094904.3502741-1-zhengxingda@iscas.ac.cn |
||
Maxime Ripard
|
666f12ae9f |
Merge fdo/drm/drm-fixes into drm-misc-fixes
Backmerging to get drm-misc-fixes up to v7.3-rc3. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
Tvrtko Ursulin
|
2ab510e631 |
drm/sched: Fix virtual runtime race
Prevent pushing a new job to an entity seeing it being the first in the
queue, and hence entering the drm_sched_rq_add_entity() path, if the pop
side in drm_sched_entity_pop_job() has just de-queued the job but not yet
updated the saved virtual time.
Restoring the unsaved virtual time, which is at this point not a delta but
still an absolute value, pushes the said entity to the rear of the run queue
for a potentially very long time.
We close this race by pulling the locked sections out to encompass both
the queue push/pop and corresponding rbtree management.
This is aligned with the future direction to replace the current lockless
job queue with one of the fully locked standard list primitives.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes:
|
||
Christian König
|
3ed11c671f |
dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3
The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference"
changed the check to test for the ops pointer instead of the signaled
bit to avoid a potential NULL dereference when the ops pointer has been
cleared.
The problem is now that the ops pointer is cleared only when neither the
release nor the wait callback is implemented and this isn't true for a lot
of dma_fence implementations yet. So those implementations lost the RCU
protection after signaling of the returned string resulting in potential
use after free.
Add the signaling check additional to the ops pointer check so that we
have both the protection against NULL dereference as well as the RCU
protection after signaling for the returned string.
v2: improve comments to note RCU protection and explain why we check
both signaling state and ops pointer
v3: some comment improvements suggested by Philip
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes:
|
||
Karl Mehltretter
|
073a30d75f |
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do.
Fixes:
|
||
Linus Torvalds
|
fd73f4a665 | Linux 7.3-rc3 v7.3-rc3 | ||
|
Linus Torvalds
|
22098763a1 |
tracing fixes for 7.3:
- Don't destroy user event fields when removal fails
User event fields are destroyed before the event is removed from
visibility. But that can fail leaving the still visible event with no
fields. Move the destroying of the fields to after the event is
successfully removed from visibility.
- Initialize function graph state is fork before calling copy_exec_state()
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, ftrace_graph_exit_task() will free the tasks
ret_stack pointer. Since that pointer is still using the parent's
ret_stack, it mistakenly frees the parent's pointer too.
Call ftrace_graph_init() on the task first which will NULL out the new
tasks's ret_stack and if the copy fails, it will not free anything.
- Remove FGRAPH_MAX_INDEX
The macro FGRAPH_MAX_INDEX was added but never used. Remove it.
- Save ent_size in function graph printing of nested functions
The function graph tracer needs to look at the next event to see if the
next event is the return of the current function entry. If it is, it
prints a single line:
ktime_get();
Otherwise it prints it like a nested function:
tick_nohz_irq_exit() {
ktime_get();
kcpustat_irq_exit();
}
In order to look at the next event, it must save the current event so that
it has the information to print from it. It saves the event in the
iterator descriptor called "ent". What it doesn't save is the ent_size of
the event which is now used to know if the function graph arguments are to
be printed. The peek doesn't save the size so the size used happens to be
that of the size of the last event that was seen.
Save the entry event size in the iterator descriptor so that the correct
size is used.
- Fix several errors with freeing data in the histogram code
The histogram code had a lot of leaked or or incorrect accounting when
failures happen. Correct them.
- Fix histogram regression of .percent and .graph modifiers
Up until 6.3 histogram values could have "percent" or "graph" modifiers
that changed how they were printed. But a change that added restricting
histograms values from being strings, stack traces and other modifiers
inadvertently prevented them from using the percent and graph modifiers,
which were legal use cases for values.
Put back the percent and graph modifiers.
- Fix various typos in the comments
- Set the trace_clock before initializing a histogram with clock argument
The histogram API allows the user to specific which trace clock to use via
a "clock=" string. The histogram is set up first before the clock is
checked. If the passed in clock is not valid, it exits without fully
fixing up the histogram leaving it on the list and a use-after-free can
trigger.
Update the clock argument first and if it fails then exit gracefully
before the histogram trigger is placed on any lists.
- Restore :mod: trailer after parsing in ftrace_set_clr_event
The function ftrace_set_clr_event() modifies the parse string and needs to
put it back to what was passed in. It searches for ":mod:" via a strsep()
but fails to put back the first ':' in the string.
Add back the ':' in the passed in string.
- Take trace_array reference when opening a tracer options file
The options files are dynamically created and some tracers add their own
options. When a tracer adds their own list of options, the trace_array
holding them has an array to hold the list of options for each tracer.
This array increases in size via a krealloc(), and the new entry gets a
newly allocated array to hold the options of the new tracer being added.
The element in each entry of the tracer's option array holds a pointer
back to the trace_array, a pointer to the tracer it is associated to, a
pointer to the flags of the option.
The issue is that these arrays are freed when the trace_array is freed
when its instance it represents is removed from the instances directory.
There's a race that an open of one of these options files can happen when
the instance is being removed.
Add a new helper function to be called by the open function of the options
file to iterate all existing trace_arrays under a lock and find the one
that has the given option element in one of it's tracer arrays. If found,
then update the associated trace_array's reference counter to keep it from
being freed. If not found, have the open call return -ENODEV.
- Disable interrupts when acquiring the lock in rb_wake_up_waiters()
The function rb_wake_up_waiters() assumes it will be called in interrupt
context and does not disable irqs when taking cpu_buffer->reader_lock,
which can be called in hard interrupt context. The issue is in PREEMPT_RT,
this function is called in thread context leaving this lock open to a
deadlock.
Take the lock with interrupts disabled.
- Use rcu_assign_pointer() for tmp_ops filter hash
The tmp_ops used in update_ftrace_direct_mod() assigns its filter_hash
field directly, but that field is annotated as __rcu and sparse complains.
Assign it with rcu_assign_pointer()
- Fix use-after-free in enable_trigger_private_data_free()
The trace_event_call is accessed through the event_trigger_data's
trace_event_file pointer to put the trace_event_call on freeing. The issue
is that the trace_event_file data may have been freed already causing a
use-after-free. Add a field to the event_trigger_data that points directly
to the trace_event_call so that it can decrement its reference directly
without needing to go through the trace_event_file.
- Fix accounting of buffer data remote headers
trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the
number of pages is needed for the asked for size as it doesn't take into
account the meta data on each page. Add a helper function to do the
calculation properly and use that in these functions.
- Catch nr_page_va overflow in ring_buffer_desc sizing
The number of pages per remote ring buffer is capped by
ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
overflow that field would silently allocate a descriptor smaller than what
was asked for.
- Do not resize the subbuf order if any per_cpu buffer is disabled
The mmapping of ring buffers disables resizing the subbuffers, but it is
done per-cpu whereas the subbuf size change is done for all the per_cpu
buffers under the buffer->mutex. It could change the size of some while
the mapping is happening on others. Have the resize of the subbuf order
check all the per_cpu buffers under the lock to see if any of them is
disabled before starting and causing an inconsistency between buffers that
are being mapped.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaqbdrBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qro9AQDF/j3VW3Uu98lVFI9AB10XYhLDd5nt
Zpf+3RviNgFpxgEAiE2+4K+4sM2SfaDDh9JMww9MKg1exL+cemE3a+JbBgY=
=jgYE
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Don't destroy user event fields when removal fails
User event fields are destroyed before the event is removed from
visibility. But that can fail leaving the still visible event with no
fields. Move the destroying of the fields to after the event is
successfully removed from visibility.
- Initialize function graph state is fork before calling
copy_exec_state()
For non-CLONE_VM forks, copy_exec_state() allocates a new
task_exec_state. If that allocation fails, ftrace_graph_exit_task()
will free the tasks ret_stack pointer. Since that pointer is still
using the parent's ret_stack, it mistakenly frees the parent's
pointer too.
Call ftrace_graph_init() on the task first which will NULL out the
new tasks's ret_stack and if the copy fails, it will not free
anything.
- Remove FGRAPH_MAX_INDEX
The macro FGRAPH_MAX_INDEX was added but never used. Remove it.
- Save ent_size in function graph printing of nested functions
The function graph tracer needs to look at the next event to see if
the next event is the return of the current function entry. If it is,
it prints a single line:
ktime_get();
Otherwise it prints it like a nested function:
tick_nohz_irq_exit() {
ktime_get();
kcpustat_irq_exit();
}
In order to look at the next event, it must save the current event so
that it has the information to print from it. It saves the event in
the iterator descriptor called "ent". What it doesn't save is the
ent_size of the event which is now used to know if the function graph
arguments are to be printed. The peek doesn't save the size so the
size used happens to be that of the size of the last event that was
seen.
Save the entry event size in the iterator descriptor so that the
correct size is used.
- Fix several errors with freeing data in the histogram code
The histogram code had a lot of leaked or or incorrect accounting
when failures happen. Correct them.
- Fix histogram regression of .percent and .graph modifiers
Up until 6.3 histogram values could have "percent" or "graph"
modifiers that changed how they were printed. But a change that added
restricting histograms values from being strings, stack traces and
other modifiers inadvertently prevented them from using the percent
and graph modifiers, which were legal use cases for values.
Put back the percent and graph modifiers.
- Fix various typos in the comments
- Set the trace_clock before initializing a histogram with clock
argument
The histogram API allows the user to specific which trace clock to
use via a "clock=" string. The histogram is set up first before the
clock is checked. If the passed in clock is not valid, it exits
without fully fixing up the histogram leaving it on the list and a
use-after-free can trigger.
Update the clock argument first and if it fails then exit gracefully
before the histogram trigger is placed on any lists.
- Restore :mod: trailer after parsing in ftrace_set_clr_event
The function ftrace_set_clr_event() modifies the parse string and
needs to put it back to what was passed in. It searches for ":mod:"
via a strsep() but fails to put back the first ':' in the string.
Add back the ':' in the passed in string.
- Take trace_array reference when opening a tracer options file
The options files are dynamically created and some tracers add their
own options. When a tracer adds their own list of options, the
trace_array holding them has an array to hold the list of options for
each tracer. This array increases in size via a krealloc(), and the
new entry gets a newly allocated array to hold the options of the new
tracer being added.
The element in each entry of the tracer's option array holds a
pointer back to the trace_array, a pointer to the tracer it is
associated to, a pointer to the flags of the option.
The issue is that these arrays are freed when the trace_array is
freed when its instance it represents is removed from the instances
directory. There's a race that an open of one of these options files
can happen when the instance is being removed.
Add a new helper function to be called by the open function of the
options file to iterate all existing trace_arrays under a lock and
find the one that has the given option element in one of it's tracer
arrays. If found, then update the associated trace_array's reference
counter to keep it from being freed. If not found, have the open call
return -ENODEV.
- Disable interrupts when acquiring the lock in rb_wake_up_waiters()
The function rb_wake_up_waiters() assumes it will be called in
interrupt context and does not disable irqs when taking
cpu_buffer->reader_lock, which can be called in hard interrupt
context. The issue is in PREEMPT_RT, this function is called in
thread context leaving this lock open to a deadlock.
Take the lock with interrupts disabled.
- Use rcu_assign_pointer() for tmp_ops filter hash
The tmp_ops used in update_ftrace_direct_mod() assigns its
filter_hash field directly, but that field is annotated as __rcu and
sparse complains. Assign it with rcu_assign_pointer()
- Fix use-after-free in enable_trigger_private_data_free()
The trace_event_call is accessed through the event_trigger_data's
trace_event_file pointer to put the trace_event_call on freeing. The
issue is that the trace_event_file data may have been freed already
causing a use-after-free. Add a field to the event_trigger_data that
points directly to the trace_event_call so that it can decrement its
reference directly without needing to go through the
trace_event_file.
- Fix accounting of buffer data remote headers
trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
the number of pages is needed for the asked for size as it doesn't
take into account the meta data on each page. Add a helper function
to do the calculation properly and use that in these functions.
- Catch nr_page_va overflow in ring_buffer_desc sizing
The number of pages per remote ring buffer is capped by
ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
overflow that field would silently allocate a descriptor smaller than
what was asked for.
- Do not resize the subbuf order if any per_cpu buffer is disabled
The mmapping of ring buffers disables resizing the subbuffers, but it
is done per-cpu whereas the subbuf size change is done for all the
per_cpu buffers under the buffer->mutex. It could change the size of
some while the mapping is happening on others. Have the resize of the
subbuf order check all the per_cpu buffers under the lock to see if
any of them is disabled before starting and causing an inconsistency
between buffers that are being mapped.
* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
ring-buffer: Check resize_disabled before publishing the new subbuf order
tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
tracing/remotes: Account for ring buffer page header in size calculation
tracing: Don't dereference trace_event_file in deferred trigger free
ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
tracing: Take trace_array reference when opening a tracer options file
tracing: Fix ring_buffer_read_page_size() kernel-doc
tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
tracing: Fix memory corruption from a "STACKTRACE" histogram key
tracing: Fix memory corruption from the histogram stacktrace modifier
tracing: Undo the registration when enabling the histogram trigger fails
tracing: Take the reference before publishing the named histogram trigger
tracing: Set the trace clock before registering the histogram trigger
tracing: Fix typo "preceeded" in comment
tracing: Fix typo "availabe" in comment
tracing: Let histogram values keep the percent and graph modifiers
tracing: Keep the entry count when the histogram stats allocation fails
tracing: Free histogram the field rejected for a bad modifier
tracing: Free histogram the var ref when its initialization fails
...
|
||
|
Linus Torvalds
|
d681d7ef61 |
Merge misc regression fixes that seem to have fallen through the cracks
Thorsten continues to track regressions, and reporting on known issues with fixes that don't seem to make any progress. I'm going to do an rc3 release later today - let's not keep these known issues pending for yet another rc for no obvious reason. Reported-by: Thorsten Leemhuis <regressions@leemhuis.info> Link: https://lore.kernel.org/all/46403cf8-9a81-4596-87eb-dde58ae4c5db@leemhuis.info/ * regressions: media: ipu-bridge: do not use the CVS device lookup for IVSC wifi: mt76: mt792x: fix NULL dereference in ACPI SAR init during probe wifi: mt76: mt7921: skip unknown CLC firmware records |
||
Sergey Zagursky
|
856c562c94 |
media: ipu-bridge: do not use the CVS device lookup for IVSC
Since commit |
||
Devin Wittmayer
|
7825de3f75 |
wifi: mt76: mt792x: fix NULL dereference in ACPI SAR init during probe
Some laptops carry a MediaTek power table in their firmware, and the driver reads it to set a transmit limit for each frequency range. It only fills in the ranges themselves when it registers the device. The startup step that does this existed already, but it never programmed anything. Two recent commits made it run a regulatory update instead, which sets the limits on the way through, long before registration. As a result, on a machine that has the table the driver reads through an empty pointer and the interface never appears: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:mt792x_init_acpi_sar_power Call Trace: mt7921_set_tx_sar_pwr mt7921_mcu_regd_update mt7921_regd_update mt7921_run_firmware mt7921e_mcu_init mt7921_init_work Skip it when the ranges are missing. They are applied again once the device is up, which is where they came from before. Reported-by: Klara Modin <klarasmodin@gmail.com> Closes: https://lore.kernel.org/linux-wireless/aoyxqHYvSuaBeubf@soda.int.kasm.eu/ Fixes: |