Add Memory Management Unit (MMU) support in Tyr. The MMU module wraps a
SlotManager instance to allocate MMU address-space slots for use by
virtual memory (VM) address spaces. The MMU's SlotManager uses an
AddressSpaceManager to handle the hardware-specific callbacks. For
example, the AddressSpaceManager activates and evicts VMs from slots by
writing commands to the MMU registers.
Add an implementation block for the MMU's MEMATTR register to provide
a method for translating the Memory Attribute Indirection Register (MAIR)
format from the pagetable configuration to a format understood by the MMU.
Create an mmu instance during probe, it will be used by subsequent patches
in this series.
Wrap the iomem stored in TyrDrmRegistrationData in an Arc. The iomem
is stored in the mmu through its AddressSpaceManager. In anticipation
of the iomem also being stored in the firmware object, set up shared
ownership of the iomem now.
Update Kconfig to add the new MMU and IOMMU dependencies required
by this MMU module.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-3-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Introduce a generic slot manager to dynamically allocate limited hardware
slots to software "seats". It can be used for both address space (AS) and
command stream group (CSG) slots.
The slot manager initially assigns seats to its free slots. It will
continue to reuse the same slot for a seat, as long as another seat does
not start to use the slot in the interim.
When contention arises because all of the slots are allocated, the slot
manager will lazily evict and reuse slots that have become idle (if any).
The seat state is protected using the LockedBy pattern with the same lock
that guards the SlotManager. This ensures the seat state stays consistent
across slot operations.
Hardware specific behaviour is controlled through the SlotManager's
specific manager type that implements the `SlotOperations` trait.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-2-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Currently Tyr is not storing any resources in its drm::Driver
RegistrationData.
Move Tyr's device-private resources and gpu information from
drm::Driver::Data to drm::Driver::RegistrationData. This allows Tyr to
access this data safely within the lifetime of its binding to its parent
platform device and while registered with userspace.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-1-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Currently, using a raw IoPageTable is unsafe because the returned
IoPageTable is not tied to the device driver binding lifetime.
Since device drivers now receive a lifetime parameter <'bound>
representing the interval during which a device driver is bound to its bus
device, add a lifetime parameter to IoPageTable. This ensures that
the returned IoPageTable cannot outlive the bus device binding.
Also remove the option to create a page table as a device resource since
currently Devres is not compatible with resources that have a lifetime
parameter. This option can be restored once the lifetime-aware
wrapper for devres is available and if a use-case appears for it.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Link: https://patch.msgid.link/20260703-pgtable_lt_b4-v3-1-e738e1f513a4@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Create new function abstracting WPR2 region range query.
Refactor gsp hal tu102 to query the WPR2 region range using this new
function.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Antonin Malzieu Ridolfi <dev@nanonej.com>
Link: https://patch.msgid.link/20260727-nova-core-regs-split-v2-1-21b5e6e32ea5@nanonej.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Backmerge to pull in commit 21fcb222f0 ("drm: Remove DRIVER_GEM_GPUVA
feature flag"), which a Tyr patch series depends on.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
`PACKED_REGISTRY_TABLE::size` describes the entire table, including its
fixed-size header. `SetRegistry` currently initializes it with only the
variable payload length, omitting the 8 bytes header.
Fix this by using `CommandToGsp::size` to obtain the actual command
size, including its header.
Fixes: 19b0a6e7c2 ("gpu: nova-core: gsp: Add SetRegistry command")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/r/20260722075253.B6DDB1F00A3D@smtp.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260723-nova-registry-size-fix-v1-1-8f471ba00ab4@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
UAPI Changes:
cgroup:
- dmem: accept one region per limit
drm:
- send per-connector hotplug events
Core Changes:
buddy:
- tests: test buffer clearence on resume
panel:
- implement ref counting for struct drm_panel throughout the DRM tree
Driver Changes:
etnaviv:
- force flush on power register ops
gma:
- replace simple-kms helpers with regular atomic helpers
- clean up
host1x:
- support Tegra264 plus DT bindings
- fix minor issues throughout driver
hypervdrm:
- clean up PCI-device binding
imagination:
- mark BXM-4-64 MC1 (36.52.104.182) as supported
- clean up
ivpu:
- clean up
nouveau:
- remove redundant call to pm_runtime_mark_last_busy()
panel:
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
panfrost:
- clean up
solomon:
- clean up variables
tve200:
- add OF module alias for autoloading
v3d:
- fix job BO handling
vc4:
- ref i2c-adapter module
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmpjHwYbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojxQwH/A03jX2cGZK5TiwFX0Zk
Y09nJN008Zysmvincbaze01959ccKgM3xi5p4qY2EHFCdzD3AIAPW7dEo+f82aPH
dvmjkW2+tWHaitn9YgiZY7igp5tFQaie3q4QaWyP5Ws4NYdFJfTknPJwof+XQmPb
nAl6Ut4ZiawvKrg6NMseVfP8oFYGfFsGpGVWTFTXV+BwzocceT484B6CpJ5c7Z/F
Q0xJWBsd+o8E4hozCANRbbwcpwabnuGXgXgxMi+y+XovtsIFH7+4xdV88RksnhAD
9CuCaJPkTN08rQgtTAYCccIbxlEoi589bCr+odGxwYuSejVzg69JxmrtmNM2fCc+
tQM=
=9jIF
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-07-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.3:
UAPI Changes:
cgroup:
- dmem: accept one region per limit
drm:
- send per-connector hotplug events
Core Changes:
buddy:
- tests: test buffer clearence on resume
panel:
- implement ref counting for struct drm_panel throughout the DRM tree
Driver Changes:
etnaviv:
- force flush on power register ops
gma:
- replace simple-kms helpers with regular atomic helpers
- clean up
host1x:
- support Tegra264 plus DT bindings
- fix minor issues throughout driver
hypervdrm:
- clean up PCI-device binding
imagination:
- mark BXM-4-64 MC1 (36.52.104.182) as supported
- clean up
ivpu:
- clean up
nouveau:
- remove redundant call to pm_runtime_mark_last_busy()
panel:
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
panfrost:
- clean up
solomon:
- clean up variables
tve200:
- add OF module alias for autoloading
v3d:
- fix job BO handling
vc4:
- ref i2c-adapter module
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260724082204.GA18774@linux.fritz.box
Support for this GPU is now in a very good state, with only a handful of
Vulkan CTS tests still failing when testing using CTS version 1.4.5.3 on
the BeagleV-Ahead SBC. With the firmware having been upstreamed [1], now
is the time to promote this GPU from experimental to supported.
[1] https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/1138
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260720-promote-bxm-4-64-v1-2-39abcd1cf263@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The list of supported GPUs contains the GPU model, along with the SoCs
they're found in. The SoC information can easily get out of date, as
typically GPU models will be integrated into many different SoCs and
upstream support for these can potentially happen over a long stretch
of time without necessarily requiring any GPU driver changes.
Replace the SoC information with the BVNC instead. This uniquely identifies
a GPU implementation and is useful in cases where a GPU model may have
multiple implementations due to, e.g. hardware errata having been fixed,
and the driver doesn't yet support all of them.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260720-promote-bxm-4-64-v1-1-39abcd1cf263@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The TVE200 DRM driver can be built as a module and uses tve200_of_match
as its OF match table, but the table is not exported for module alias
generation.
Add the MODULE_DEVICE_TABLE(of, ...) entry so modpost can generate OF
module aliases for OF based module autoloading.
Fixes: 179c02fe90 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260715024130.186416-1-pengcan@kylinos.cn
GSP-RM needs a larger WPR2 heap when booting in vGPU mode. The heap size
is firmware-dependent, so it should come from the generated firmware
bindings instead of being open-coded in nova-core.
Pass the detected vGPU state into the framebuffer layout calculation. Keep
baremetal boots on the existing heap sizing path, and use the 570.144
vGPU default heap binding only when vGPU is enabled. The same state match
also sets the VF partition count, so disabled and invalid 0/1-VF states do
not enter the vGPU heap path.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-7-zhiw@nvidia.com
[ Use checked arithmetic to calculate wpr2_heap_addr. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The GSP registry setup needs to advertise SR-IOV mode when nova-core boots
GSP for an enabled vGPU configuration. Without the registry entry, GSP-RM
is not told to initialize in the mode required by NVIDIA vGPU.
Append RMSetSriovMode to the SetRegistry command when the vGPU state
detected before GSP boot is enabled. Keep the existing registry entries
unchanged for non-vGPU boots.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-6-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
GSP boot needs a stable view of vGPU state before it starts building the
boot-time data structures that depend on SR-IOV and firmware policy. That
state must be derived once from the PCI VF count and the FSP PRC vGPU mode
knob before booting GSP.
Add VgpuManager to detect and retain the vGPU state during GPU
construction. Keep the manager separate from the detected state because
later vGPU milestones will add vGPU resources and lifecycle state to it.
Keep the vGPU capability gate local to the vGPU module with per-chip HAL
modules. Treat failures to detect the optional vGPU state as disabled so
they do not prevent a bare-metal probe, and log both the failure and the
detected state where the manager is constructed.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-5-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
vGPU boot needs to know whether firmware reports vGPU mode as active.
FSP's Management Partition exposes PRC (Product Reconfiguration Control)
as an API for reading device configuration knobs without firmware
updates. The vGPU mode knob is one such configuration value.
Add typed PRC request and response payloads for the vGPU mode object,
add the PRC NVDM type, and parse the returned knob value into VgpuMode.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-4-zhiw@nvidia.com
[ FspPrcMessage is small and short-lived; stack-allocate it instead of
using KBox. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Expose pci_sriov_get_totalvfs() to Rust PCI drivers so they can query
how many SR-IOV VFs a device supports.
Use a conditional C helper because the !CONFIG_PCI_IOV version of
pci_sriov_get_totalvfs() is a static inline function and is therefore
not emitted into the Rust bindings. Return Option<NonZero<u16>> so Rust
callers must handle the zero value that represents unavailable SR-IOV.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/all/DJHPRE4TGGT8.BUTMYOF5YE05@nvidia.com/
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-3-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
pci_sriov_get_totalvfs() reports a VF count, not an errno-style
status. It returns 0 when SR-IOV is unavailable or the device is not a
PF, and otherwise returns the PF's driver_max_VFs value.
driver_max_VFs is stored as a u16 in struct pci_sriov. It is derived
from the SR-IOV TotalVFs field or from a driver-provided limit, so the
implementation cannot return a negative value.
Change the declaration, CONFIG_PCI_IOV stub, and implementation to
return unsigned int.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/all/DJHPRE4TGGT8.BUTMYOF5YE05@nvidia.com/
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-2-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add gpu_write_power_sync to verify that power register modifications
have reached the endpoint device in sequence specific sections that do
not validate device state.
These sequence specific areas have been detected experimentally with an
am57xx-evm through numerous boot and module load+unload cycles.
Signed-off-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patch.msgid.link/20251013170122.1145387-2-rs@ti.com
Currently the code waits for "not active" but this is not the same as
halted as there are more than two states. Match openrm here and wait for
halted instead.
Fixes: c7fea1f709 ("gpu: nova-core: add non-sec2 unload path")
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-10-8e3d8bc32bb9@nvidia.com
[acourbot: s/imply/guarantee.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Currently, `GspSequencer` stores a raw DMA handle. Instead, store a
reference to `Coherent` to statically ensure that the allocation lives
long enough.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-4-8e3d8bc32bb9@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Currently, `FmcBootArgs` takes DMA handles directly, rather than
references to the `Coherent` for them. This is error prone, so instead
store lifetime'd references to the `Coherent` allocation.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-3-8e3d8bc32bb9@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Currently, `poll_msgq` will report a message of size 4 if the queue
pointers are broken. It's easy to catch this if it occurs, so have
`poll_msgq` return an error in this case.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-2-8e3d8bc32bb9@nvidia.com
[acourbot: explicitly mention the error, add paragraph separator.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
From now on I'll use my own domain for development work, reflect that in
MAINTAINERS and mailmap.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Natalie Vock <nat@pixelcluster.dev>
Link: https://patch.msgid.link/20260705175305.5589-1-nat@pixelcluster.dev
The Opto Logic SCX1001511GGC49 is a 10.1" WXGA (1280x800) TFT LCD LVDS
panel.
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260623195741.495734-3-leoreis.costa@gmail.com
Some DRM drivers lacked the drm_panel.h include to use drm_panel_put()
after the commit b71a623598 ("drm/panel: of_drm_find_panel() return a counted reference").
Fixes: b71a623598 ("drm/panel: of_drm_find_panel() return a counted reference")
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722-panel-fix-kms-panel-put-v1-1-ebde56446ee5@linaro.org
Commit 922fb2db02 ("dt-bindings: display: simple: Add Kyocera
tcg070wvlq panel") added the compatible string for the Kyocera
tcg070wvlq panel to the devicetree bindings documentation
(panel-simple.yaml), but the corresponding entry was not added
to the panel-simple driver.
Add the missing compatible entry to the driver.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260721041935.757240-1-hs@nabladev.com
Currently, the FSP receive message code will try to allocate whatever
was sent without checking it at all. But the actual size allowed is
limited to 1024 anyway, so reject any messages over that size as bogus.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-1-8e3d8bc32bb9@nvidia.com
[acourbot: use `SZ_1K` constant for size.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Try to send per-connector hotplug events as often as possible, rather
than connector-less global hotplug events. This does result in more
hotplug events if multiple connectors changed at the same time, but
give userspace more actionable information.
Since the hotplug event needs to be sent outside of the mode_config
mutex to avoid a deadlock, the drm_client_dev_hotplug() call is split
off from the drm_sysfs_(connector_)?hotplug_event calls.
Co-developed-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260526-hot-plug-passup-v10-2-f62351a9ea3e@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Since the very day epoch_counter in drm_connector was introduced, its
documentation was not accurate. It claims it's used to detect "any other
changes [...] besides status", when in reality, it's used to detect
changes including status, as a status change also increases the epoch
counter.
Adjust the documentation to rectify this discrepancy.
Fixes: 5186421cbf ("drm: Introduce epoch counter to drm_connector")
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260526-hot-plug-passup-v10-1-f62351a9ea3e@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Accept only one "region value" pair entry for the dmem.max, dmem.min,
dmem.low files.
This changes the UAPI that otherwise accepted multiple lines for setting
multiple entries in one write. No existing user is known to rely on
writing multiple regions in a single write.
Processing multiple regions in dmemcg_limit_write() could quietly change
first limits before failing on a later one and returning an error to the
writer, with no indication some changes occurred.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Natalie Vock <natalie.vock@gmx.de>
Link: https://patch.msgid.link/20260608-cgroup-dmem-write-single-region-v2-1-b0cd6c4ccf1b@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Add a new unit test case for buffer clearance issue during
resume.
Using a non-power-of-two mm size, allocate alternating blocks of
4KiB in an even sequence and free them as cleared. All alternate
blocks should be marked as dirty and the split blocks should be
merged back to their original size when the blocks clear reset
function is called.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260721114236.507578-1-Arunpravin.PaneerSelvam@amd.com
Screen garbage or flickering can be observed during mode changes (such
as VT switches) on systems using the AUO B116XAK01.6 and B140XTK02.4
panels.
This occurs because the backlight is enabled before the video signal
stabilizes. Waveform measurements show that the panel signal takes
around 140ms to stabilize after a mode change, meaning the previous 50ms T8
timing was insufficient.
To resolve this issue, adjust the eDP panel delay entry from
delay_200_500_e50 to delay_200_500_e200 (increasing T8 from 50ms to 200ms).
This matches the updated panel specifications from AUO, which now formally
define T8 as 200ms to mask any display abnormalities during mode changes.
Signed-off-by: Dio Zhang <dioyc_zhang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260720025358.2781136-1-dioyc_zhang@compal.corp-partner.google.com
The scheduled_jobs list head was introduced in commit f3ba91228e
("drm/panfrost: Add initial panfrost driver") but never used. Remove the
dead field and its initialization.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260710121423.2820472-2-mcanal@igalia.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
It matches the usual coding style to have the MODULE_DEVICE_TABLE macro
directly after the respective arrays.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/7f9d4a239c76b6bb384048ea5591a21ed87d9b0e.1782925276.git.u.kleine-koenig@baylibre.com
.subvendor and .subdevice were set to 0 implicitly, so only devices with
these two values set to 0 in hardware can probe automatically. Make this
requirement explicit.
While touching this array item, also make use of the pci macro designed
for that case.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/019450ffb519d02821364afca32b9f48bcd8d2b6.1782925276.git.u.kleine-koenig@baylibre.com
The pci driver must not kept registered if the module is unloaded after
vmbus_driver_register() fails. So check the return value of
vmbus_driver_register() and unregister the pci driver on failure.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/4b7dbf00ce4ff664b7d5dd74b2f39d8d87c1ade9.1782925276.git.u.kleine-koenig@baylibre.com
The helpers for dealing with flexible structures exist, so let's use them.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20250709-flex-array-check-v1-2-8adeb0bf0cde@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
It makes little to no sense to use SIZE_CHECK() on flexible structures, so
let's validate something that actually matters instead.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20250709-flex-array-check-v1-1-8adeb0bf0cde@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Add a driver for panels using the Novatek NT36536 Display Driver IC,
including support for the CSOT PP8807HB1-1, a dual-link 10-bit panel
found in LENOVO Legion Y700 Gen4.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260709142846.12463-3-mitltlatltl@gmail.com
NT36536 is a driver IC used to drive MIPI-DSI panels. It is found in
LENOVO Legion Y700 Gen4 with a dual-link 10-bit CSOT panel.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260709142846.12463-2-mitltlatltl@gmail.com
find_panel_by_fwnode() is the fwnode-based counterpart to
of_drm_find_panel(), used internally by drm_panel_add_follower().
Like of_drm_find_panel(), it returned an unrefcounted pointer,
leaving a window where the panel could be freed between the lookup
and first use.
drm_panel_add_follower() worked around the missing panel kref by
calling get_device() on the panel's underlying struct device.
However, get_device() only prevents the device kobject from being freed.
It does not prevent the panel's kzalloc()'d container memory from being
released when the kref reaches zero.
Apply the same fix: call drm_panel_get() under panel_lock before
returning. Since find_panel_by_fwnode() now transfers a counted
reference to drm_panel_add_follower(), drm_panel_remove_follower()
must balance it with a matching drm_panel_put().
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-4-023900c32e01@redhat.com
Callers of of_drm_find_panel() and drm_of_find_panel_or_bridge()
receive a pointer with no reference held, creating a window where
the panel device can be unregistered and freed between the lookup
and first use (e.g., drm_panel_prepare()).
Fix the lookup function by acquiring a reference with drm_panel_get()
before returning, under panel_lock. Callers are now responsible for
calling drm_panel_put() when they no longer need the pointer.
For bridge drivers that immediately wrap the panel in a panel_bridge
(which acquires its own reference), release the lookup reference right
after the bridge creation call.
For analogix-anx6345, which stores the panel for direct use, release
the reference in the i2c remove path.
For platform drivers using analogix_dp_core with a component lifecycle
(exynos_dp, rockchip analogix_dp), release the lookup reference in the
platform remove() function. The panel_bridge created during bind() holds
a separate reference that devm cleanup releases after remove() returns.
Also fix devm_drm_of_get_bridge() and drmm_of_get_bridge() in
bridge/panel.c itself, update a second batch of drivers calling
of_drm_find_panel() or drm_of_find_panel_or_bridge() to release the
lookup reference after wrapping the panel in a bridge, and handle the
cases where a panel is found but cannot be used, dropping the reference
immediately in those paths.
Assisted-by: Claude:claude-opus-4-6
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-3-023900c32e01@redhat.com
drm_panel_bridge_add_typed() stores a pointer to the drm_panel it
wraps, but never acquires a reference to it. If the panel device
goes away while a panel_bridge still exists, the dangling pointer can
be dereferenced through panel_bridge->panel.
Acquire a reference in drm_panel_bridge_add_typed() with drm_panel_get()
and release it in each teardown path.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-2-023900c32e01@redhat.com
The global panel_list holds raw pointers to drm_panel objects.
Nothing prevents a panel from being freed while it is still linked
in the list: if a driver's probe calls drm_panel_add() and then
fails at a later step, panel->list remains in panel_list. Any
subsequent call to of_drm_find_panel() that iterates the list will
dereference freed memory.
Have drm_panel_add() acquire a reference via drm_panel_get() before
inserting the panel into the list, and have drm_panel_remove() drop
it via drm_panel_put() after removing the panel from the list. The
global registry now holds a counted reference for as long as the
panel is listed, ensuring the object outlives any concurrent lookup.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-1-023900c32e01@redhat.com
With CONFIG_CC_OPTIMIZE_FOR_SIZE, the address validity check in non-const
`read8` invocaction is not optimized away, leading to build failure.
Fixes: d055768429 ("rust: drm: gem: shmem: Add vmap functions")
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260716142545.3622278-2-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
