This code is from before this driver was converted to phylink API. Phylink
deals with the unsupported interface cases before mt7530_pad_clk_setup() is
run. Therefore, the default case would never run. However, it must be
defined nonetheless to handle all the remaining enumeration values, the
phy-modes.
Switch to if statement for RGMII and return which simplifies the code and
saves an indent.
Set P6_INTF_MODE, which is the three least significant bits of the
MT7530_P6ECR register, to 0 for RGMII even though it will already be 0
after reset. This is to keep supporting dynamic reconfiguration of the port
in the case the interface changes from TRGMII to RGMII.
Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is
being used.
Read XTAL after checking for RGMII as it's only needed for the TRGMII
interface mode.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-3-d7d92a185cb1@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The crystal frequency concerns the switch core. The frequency should be
checked when the switch is being set up so the driver can reject the
unsupported hardware earlier and without requiring port 6 to be used.
Move it to mt7530_setup(). Drop the unnecessary function printing.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-2-d7d92a185cb1@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There're two code paths for setting up port 5:
mt7530_setup()
-> mt7530_setup_port5()
mt753x_phylink_mac_config()
-> mt753x_mac_config()
-> mt7530_mac_config()
-> mt7530_setup_port5()
On the first code path, priv->p5_intf_sel is either set to
P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4 when mt7530_setup_port5() is run.
On the second code path, priv->p5_intf_sel is set to P5_INTF_SEL_GMAC5 when
mt7530_setup_port5() is run.
Empty the default case which will never run but is needed nonetheless to
handle all the remaining enumeration values.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-1-d7d92a185cb1@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 1c75c424bd43 ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") this line isn't needed any
longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3a9cd1a1-40ad-487d-8b1e-6bf255419232@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) IPSec global stats for xfrm and mlx5
2) XSK memory improvements for non-linear SKBs
3) Software steering debug dump to use seq_file ops
4) Various code clean-ups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmXBgUEACgkQSD+KveBX
+j4qmQgAr5pNBUkxyylEKU0cB8kh21LaOzimVjpGrKCzPtb/Fz8h6E1h668icpFy
2G4iuyJ2/doA0Bn4FJC730i6Xk2sqkXiY85yclvMPObS7b0PckD72d6iH9UfzfYB
Vof1lg3HdVvTq1KhJ1T/sCEB2skBLzEGV/fZWmL39zPaxM9JfHA2o5xDxdW7/GhT
0LPg84MinikoKbfw9m45l2zp52yTRrLzTUbDubwXFC4Ltg/yM4uAsbTArQzA8VJ9
q95XGZ0ZmZDFsVbjp9suCJFaTVrKmh2yy16a3BpKpm72L+K8yciUTqcqDd5vH2wW
CQ0eKMqBtB8c1Jr16oKfQ42NFF0FIQ==
=0IjR
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-02-01
1) IPSec global stats for xfrm and mlx5
2) XSK memory improvements for non-linear SKBs
3) Software steering debug dump to use seq_file ops
4) Various code clean-ups
* tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: XDP, Exclude headroom and tailroom from memory calculations
net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculations
net/mlx5: DR, Change SWS usage to debug fs seq_file interface
net/mlx5: Change missing SyncE capability print to debug
net/mlx5: Remove initial segmentation duplicate definitions
net/mlx5: Return specific error code for timeout on wait_fw_init
net/mlx5: SF, Stop waiting for FW as teardown was called
net/mlx5: remove fw reporter dump option for non PF
net/mlx5: remove fw_fatal reporter dump option for non PF
net/mlx5: Rename mlx5_sf_dev_remove
Documentation: Fix counter name of mlx5 vnic reporter
net/mlx5e: Delete obsolete IPsec code
net/mlx5e: Connect mlx5 IPsec statistics with XFRM core
xfrm: get global statistics from the offloaded device
xfrm: generalize xdo_dev_state_update_curlft to allow statistics update
====================
Link: https://lore.kernel.org/r/20240206005527.1353368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
selftests: bonding: use slowwait when waiting
There are a lot waitings in bonding tests use sleep. Let's replace them with
slowwait(added in the first patch). This could save much test time. e.g.
bond-break-lacpdu-tx.sh
before: 0m16.346s
after: 0m2.824s
bond_options.sh
before: 9m25.299s
after: 6m14.439s
bond-lladdr-target.sh
before: 0m7.090s
after: 0m6.148s
In total, we could save about 180 seconds.
====================
Link: https://lore.kernel.org/r/20240205130048.282087-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use slowwait instead of hard code sleep for bonding tests.
In function setup_prepare(), the client_create() will be called after
server_create(). So I think there is no need to sleep in server_create()
and remove it.
For lab_lib.sh, remove bonding module may affect other running bonding tests.
And some test env may buildin bond which can't be removed. The bonding
link should be removed by lag_reset_network() or netns delete.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of grat_arp is testing commit 9949e2efb5 ("bonding: fix
send_peer_notif overflow"). As the send_peer_notif was defined to u8,
to overflow it, we need to
send_peer_notif = num_peer_notif * peer_notif_delay = num_grat_arp * peer_notify_delay / miimon > 255
(kernel) (kernel parameter) (user parameter)
e.g. 30 (num_grat_arp) * 1000 (peer_notify_delay) / 100 (miimon) > 255.
Which need 30s to complete sending garp messages. To save the testing time,
the only way is reduce the miimon number. Something like
30 (num_grat_arp) * 100 (peer_notify_delay) / 10 (miimon) > 255.
To save more time, the 50 num_grat_arp testing could be removed.
The arp_validate_test also need to check the mii_status, which sleep
too long. Use slowwait to save some time.
For other connection checkings, make sure active slave changed first.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use tc filter to check if LACP was sent, which is accurate and save
more time.
No need to remove bonding module as some test env may buildin bonding.
And the bond link has been deleted.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add slowwait functions to wait for some operations that may need a long time
to finish. The busywait executes the cmd too fast, which is kind of wasting
cpu in this scenario. At the same time, if shell debugging is enabled with
`set -x`. the busywait will output too much logs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240205130048.282087-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to latest release of SMCv2.1[1], the term 'virtual ISM' has
been changed to 'Emulated-ISM' to avoid the ambiguity of the word
'virtual' in different contexts. So the names or comments in the code
need be modified accordingly.
[1] https://www.ibm.com/support/pages/node/7112343
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20240205033317.127269-1-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksmbd_iov_pin_rsp_read() doesn't free the provided aux buffer if it
fails. Seems to be the caller's responsibility to clear the buffer in
error case.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2b76ab8b5 ("ksmbd: add support for read compound")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ksmbd_extract_sharename() function lacked a complete kernel-doc
comment. This patch adds parameter descriptions and detailed function
behavior to improve code readability and maintainability.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Heiner Kallweit says:
====================
net: phy: realtek: complete 5Gbps support and replace private constants
Realtek maps standard C45 registers to vendor-specific registers which
can be accessed via C22 w/o MMD. For an unknown reason C22 MMD access
to C45 registers isn't supported for integrated PHY's.
However the vendor-specific registers preserve the format of the C45
registers, so we can use standard constants. First two patches are
cherry-picked from a series posted by Marek some time ago.
RTL8126 supports 5Gbps, therefore add the missing 5Gbps support to
rtl822x_config_aneg().
====================
Link: https://lore.kernel.org/r/31a83fd9-90ce-402a-84c7-d5c20540b730@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8126 as an evolution of RTL8125 supports 5Gbps. rtl822x_config_aneg()
is used by the PHY driver for the integrated PHY, therefore add 5Gbps
support to it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5644ab50-e3e9-477c-96db-05cd5bdc2563@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the ad-hoc MDIO constants used in the driver and use generic
constants instead.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/732a70d6-4191-4aae-8862-3716b062aa9e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'config BPF' exists in both init/Kconfig and kernel/bpf/Kconfig.
Commit b24abcff91 ("bpf, kconfig: Add consolidated menu entry for bpf
with core options") added the second one to kernel/bpf/Kconfig instead
of moving the existing one.
Merge them together.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240204075634.32969-1-masahiroy@kernel.org
After the series "Annotate kfuncs in .BTF_ids section"[0], kfuncs can be
generated from bpftool. Let's mark the existing cpumask kfunc declarations
__weak so they don't conflict with definitions that will eventually come
from vmlinux.h.
[0]. https://lore.kernel.org/all/cover.1706491398.git.dxu@dxuuu.xyz
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20240206081416.26242-5-laoar.shao@gmail.com
We should verify the return value of cpumask_success__load().
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206081416.26242-4-laoar.shao@gmail.com
push and emulate_pop are counterparts. Rename push to emulate_push and
harmonize its function signature with emulate_pop. This should remove
a bit of cognitive load when reading this code.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20231009092054.556935-2-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly zero out variables passed to emulate_pop() as output params
to harden against consuming uninitialized data, and to make sanitizers
happy. Many flows that use emulate_pop() pass an "unsigned long" so as
to be able to hold the largest possible operand, but the actual number
of bytes written is usually the word with of the vCPU. E.g. if the vCPU
is in 16-bit or 32-bit mode (on a 64-bit host), the upper portion of the
output param will be uninitialized.
Passing around the uninitialized data is benign, as actual KVM usage of
the output is also tied to the word width, but passing around
uninitialized data makes some sanitizers rightly complain.
Note, initializing the data in emulate_pop() is not a safe alternative,
e.g. it would result in em_leave() clobbering RBP[31:16] if LEAVE were
emulated with a 16-bit stack.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20231009092054.556935-1-julian.stecklina@cyberus-technology.de
[sean: massage changelog, drop em_popa() variable size change]]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Viktor Malik says:
====================
tools/resolve_btfids: fix cross-compilation to non-host endianness
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda93
("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.
The first patch of the series refactors resolve_btfids by using types
from btf_ids.h instead of accessing the BTF ID data using magic offsets.
Acked-by: Jiri Olsa <jolsa@kernel.org>
---
Changes in v4:
- remove unnecessary vars and pointer casts (suggested by Daniel Xu)
Changes in v3:
- add byte swap of global 'flags' field in btf_id_set8 (suggested by
Jiri Olsa)
- cleaner refactoring of sets_patch (suggested by Jiri Olsa)
- add compile-time assertion that IDs are at the beginning of pairs
struct in btf_id_set8 (suggested by Daniel Borkmann)
Changes in v2:
- use type defs from btf_ids.h (suggested by Andrii Nakryiko)
====================
Link: https://lore.kernel.org/r/cover.1707223196.git.vmalik@redhat.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda93
("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.
Fixes: ef2c6f370a ("tools/resolve_btfids: Add support for 8-byte BTF sets")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/7b6bff690919555574ce0f13d2a5996cacf7bf69.1707223196.git.vmalik@redhat.com
Instead of using magic offsets to access BTF ID set data, leverage types
from btf_ids.h (btf_id_set and btf_id_set8) which define the actual
layout of the data. Thanks to this change, set sorting should also
continue working if the layout changes.
This requires to sync the definition of 'struct btf_id_set8' from
include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync
the rest of the file at the moment, b/c that would require to also sync
multiple dependent headers and we don't need any other defs from
btf_ids.h.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/ff7f062ddf6a00815fda3087957c4ce667f50532.1707223196.git.vmalik@redhat.com
Currently kernel supports 8 byte and 16 byte protection information.
So, use ns->head->pi_size instead of sizeof(struct t10_pi_tuple).
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Signed-off-by: Sathyavathi M <sathya.m@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
HDP flush remapping is not done for VFs. Keep the original offsets in VF
environment.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6 ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The present way to fetch VRAM vendor information turns out to be not
reliable on GFX 9.4.3 dGPUs as well. Avoid using the data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Just ensure that ODM optimization is disabled by default.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ta if invoke node buffer
|-------- ta type ----------|
|-------- ta id ----------|
|-------- cmd id ----------|
|------ shared buf len -----|
|------ shared buffer ------|
ta if invoke node buffer is as above, copy shared buffer data to correct location
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To match firmware measurements and avoid hanging when accessing HW
that's in idle.
[How]
Increase the delays to what we've measured.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A supplement to commit: 615dd56ac5
There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume.
Fixes: 615dd56ac5 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend")
Signed-off-by: Li Ma <li.ma@amd.com>
Acked-By: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the s3 suspend abort case some type of gfx9 power
rail not turn off from FCH side and this will put the
GPU in an unknown power status, so let's reset the gpu
to a known good power state before reinitialize gpu
device.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there's no GuC firmware entry in the table and the user didn't pass
an override path, the error message is very cryptic: xe will simply try
to continue and then fail when submitting the default context:
xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_LUNARLAKE 64b0:0001 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:no dma_m_s:46 tc:1 gscfi:0
...
xe: probe of 0000:00:02.0 failed with error -22
Add an explicit error message and bail out:
xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_LUNARLAKE 64b0:0001 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:no dma_m_s:46 tc:1 gscfi:0
xe 0000:00:02.0: [drm] *ERROR* No GuC firmware defined for platform
xe 0000:00:02.0: [drm] *ERROR* GuC init failed with -2
...
xe: probe of 0000:00:02.0 failed with error -2
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201224724.551130-3-lucas.demarchi@intel.com
The current logic for firmware selection is reminiscent from i915 where
there are 2 backends and several platforms support only 1: execlist or
GuC. The xe driver has only the GuC backend and it simply doesn't work
without it. Allow developers to override the firmware path even if there
isn't a firmware entry in the table yet: this allows developers to more
easily test the very first firmware before adding it there.
The justification above is only true for GuC, however those override
paths should really be viewed as developer aid param. Simply make the
same logic for all firmwares and allow the override path to be used
for all of them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201224724.551130-2-lucas.demarchi@intel.com
The MOVBE instruction can come with an operand-size prefix (66h). In
this, case the x86 emulation code returns EMULATION_FAILED.
It turns out that em_movbe can already handle this case and all that
is missing is an entry in respective opcode tables to populate
gprefix->pfx_66.
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231212095938.26731-1-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.
NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3 ("netlink: add attribute range
validation to policy").
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xt_find_revision() expects u8, restrict it to this datatype.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When we added mount_setattr() I added additional checks compared to the
legacy do_reconfigure_mnt() and do_change_type() helpers used by regular
mount(2). If that mount had a parent then verify that the caller and the
mount namespace the mount is attached to match and if not make sure that
it's an anonymous mount.
The real rootfs falls into neither category. It is neither an anoymous
mount because it is obviously attached to the initial mount namespace
but it also obviously doesn't have a parent mount. So that means legacy
mount(2) allows changing mount properties on the real rootfs but
mount_setattr(2) blocks this. I never thought much about this but of
course someone on this planet of earth changes properties on the real
rootfs as can be seen in [1].
Since util-linux finally switched to the new mount api in 2.39 not so
long ago it also relies on mount_setattr() and that surfaced this issue
when Fedora 39 finally switched to it. Fix this.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2256843
Link: https://lore.kernel.org/r/20240206-vfs-mount-rootfs-v1-1-19b335eee133@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Karel Zak <kzak@redhat.com>
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
The driver only used the number of pwm channels to set the pwm_chip's
npwm member. The result is that if there are more capture channels than
PWM channels specified in the device tree, only a part of the capture
channel is usable. Fix that by passing the bigger channel count to the
pwm framework. This makes it possible that the .apply() callback is
called with .hwpwm >= pwm_num_devs, catch that case and return an error
code.
Fixes: c97267ae83 ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20240204212043.2951852-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>