In some supported platforms as ARCH_ZYNQMP, part of the memory is mapped
above 32bit addresses and since the DMA mask, by default, is set to 32bits,
we would need to rely on swiotlb (which incurs a performance penalty)
for the DMA mappings. Thus, we can write either the SRC or DEST high
addresses with 1's and read them back. The last bit set on the return
value will reflect the IP address bus width and so we can update the
device DMA mask accordingly.
While at it, support bigger that 32 bits transfers in IP without HW
scatter gather support.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 3980351785
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-3-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For HW scatter gather transfers we still need to look for the queue. The
HW is capable of queueing 3 concurrent transfers and if we try more than
that we'll get the submit queue full and should return. Otherwise, if we
go ahead and program the new transfer, we end up discarding it.
Fixes: e97dc74359 ("dmaengine: axi-dmac: Add support for scatter-gather transfers")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 3980351785
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-2-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If 'hw_cyclic' is false we should still be able to do cyclic transfers in
"software". That was not working for the case where 'desc->num_sgs' is 1
because 'chan->next_desc' is never set with the current desc which means
that the cyclic transfer only runs once and in the next SOT interrupt we
do nothing since vchan_next_desc() will return NULL.
Fix it by setting 'chan->next_desc' as soon as we get a new desc via
vchan_next_desc().
Fixes: 0e3b67b348 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 3980351785
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-1-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The code is encoding a pointer into an int which works fine with a
32-bit build. Not with a 64-bit one.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20251106022015.84970-2-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible string and match data for the APDMA IP version
found in the MediaTek Dimensity 9200 MT6985 SoC; this supports
extended addressing with up to 35 bits.
Other SoCs with this IP version also include the Dimensity 9400
MT6991 and Kompanio Ultra MT8196 (which don't need a specific
compatible in this driver and can reuse the mt6985 one).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251113122229.23998-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible string and match data for the APDMA IP version
found in the MediaTek Dimensity 6300 MT6835 SoC; this supports
extended addressing with up to 34 bits.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251113122229.23998-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for adding support for SoCs with APDMA IP versions
supporting more than 33 bits addressing, rename the support_33bits
variable to support_ext_addr to signal support for extended, above
4GB, addressing.
This change is cosmetic only, and brings no functional differences.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251113122229.23998-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The VFF_4G_SUPPORT register is named differently in datasheets,
and its name is "VFF_ADDR2"; was this named correctly from the
beginning it would've been clearer that there was a mistake in
the programming sequence.
This register is supposed to hold the high bits to support the
DMA addressing above 4G (so, more than 32 bits) and not a bit
to "enable" the support for VFF 4G.
Fix the name of this register, and also fix its usage by writing
the upper 32 bits of the dma_addr_t on it when the SoC supports
such feature.
Fixes: 9135408c3a ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251113122229.23998-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only SoC that declares mediatek,dma-33bits in its devicetree
currently is MT6795, which obviously also declares a SoC-specific
compatible string: in preparation for adding new SoCs with 34 bits
addressing, replace the parsing of said vendor property with logic
to get the number of addressing bits from platform data associated
to compatible strings.
While at it, also make the bit_mask variable unsigned and move the
`int rc` declaration as last to beautify the code.
Thanks to the correct declaration of the APDMA node is in all of
the MediaTek device trees that are currently upstream, this commit
brings no functional differences.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251113122229.23998-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the APDMA IP found in all of the SoC generations
that are currently supported upstream; this includes:
- MT8173, MT8183, fully compatible with MT6577 (32-bits)
- MT7988, MT8186, MT8188, MT8192, MT8195 and MT6835 (34-bits)
- MT6991, MT8196 and MT6985 (35-bits)
...where:
- MT6835 is the first SoC where the AP_DMA IP supports 34-bits
addressing; and
- MT6985 is the first SoC where the AP_DMA IP supports 35-bits
addressing.
While at it, also add myself in the maintainers list.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251113122229.23998-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While this property wants to express a capability of the hardware,
this is only used by the driver itself to vary the DMA bits during
probe.
Different hardware shall instead have different compatible strings.
Following the driver cleanup and the introduction of a specific
compatible string for the APDMA IP version found in MT6795, set
the "mediatek,dma-33bits" vendor property as deprecated.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251113122229.23998-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While it is true that this SoC is compatible with the MT6577 APDMA
IP, that is valid only when the IP is used in 32-bits addressing
mode, and, by the way there is no good reason to do so.
Since the APDMA IP in MT6795 supports 33 bits addressing, this
means that it is a newer revision compared to the one found in
MT6577, hence only partially compatible with it.
Allow nodes to specify "mediatek,mt6795-uart-dma" as their only
compatible in the case of MT6795; this is done in lieu of the fact
that there are other SoCs integrating the same version of this IP
as MT6795, and those will eventually get their own compatible that
expresses full compatibility with this SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251113122229.23998-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
m2m_hw_period is initialized only when chan_config->m2m_hw is true. This
triggers a warning:
‘m2m_hw_period’ may be used uninitialized [-Wmaybe-uninitialized]
Although m2m_hw_period is only used when chan_config->m2m_hw is true and
ignored otherwise, initialize it unconditionally to 0.
ccr is initialized by stm32_mdma_set_xfer_param() when the sg list is not
empty. This triggers a warning:
‘ccr’ may be used uninitialized [-Wmaybe-uninitialized]
Indeed, it could be used uninitialized if the sg list is empty. Initialize
it to 0.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251217-mdma_warnings_fix-v2-1-340200e0bb55@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AXIDMA IP supports reporting the amount of bytes transferred on the S2MM
channel in direct mode (i.e. non-SG), but the driver does not. Thus the
driver always reports that all of the buffer was filled.
Add xilinx_dma_get_residue_axidma_direct_s2mm() which gets the residue
amount for direct AXIDMA for S2MM direction.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20251218-xilinx-dma-residue-fix-v1-1-7cd221d69d6b@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver already has debug messages for memcpy and linear transfers,
but is missing them for cyclic transfers.
Cyclic transfers are one of the main uses of the DMA controller, used
for audio data transfers. And since these are likely the first DMA
peripherals to be enabled, it helps to have these debug messages.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251221064754.1783369-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
maxburst, as provided by the client, specifies the largest amount of
data that is allowed to be transferred in one burst. This limit is
normally provided to avoid a data burst overflowing the target FIFO.
It does not mean that the DMA engine can only do bursts in that size.
Let the driver pick the largest supported burst length within the
given limit. This lets the driver work correctly with some clients that
give a large maxburst value. In particular, the 8250_dw driver will give
a quarter of the UART's FIFO size as maxburst. On some systems the FIFO
size is 256 bytes, giving a maxburst of 64 bytes, while the hardware
only supports bursts of up to 16 bytes.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using libc types and headers from the UAPI headers is problematic as it
introduces a dependency on a full C toolchain.
Use the fixed-width integer types provided by the UAPI headers instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251222-uapi-idxd-v1-1-baa183adb20d@linutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Clobbering an error value to be returned from shdma_tx_submit() with
a pm_runtime_put() return value is not particularly useful, especially
if the latter is 0, so stop doing that.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9626129.rMLUfLXkoz@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix kernel-doc comments in include/linux/shdma-base.h to avoid
most warnings:
- prefix an enum name with "enum"
- prefix enum values with '@'
- prefix struct member names with '@'
shdma-base.h:28: warning: cannot understand function prototype:
'enum shdma_pm_state '
Warning: shdma-base.h:103 struct member 'desc_completed' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'halt_channel' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'channel_busy' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'slave_addr' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'desc_setup' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'set_slave' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'setup_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'start_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'embedded_desc' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'chan_irq' not described
in 'shdma_ops'
This one is not fixed: from 4f46f8ac80:
Warning: shdma-base.h:103 struct member 'get_partial' not described
in 'shdma_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251104002001.445297-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the correct enum name in its kernel-doc heading.
Add ending ':' to struct member names.
Drop the @id: kernel-doc entry since there is no struct member named 'id'.
edma.h:46: warning: expecting prototype for struct dw_edma_core_ops.
Prototype was for struct dw_edma_plat_ops instead
Warning: edma.h:101 struct member 'ops' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'flags' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'reg_base' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_wr_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_rd_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'mf' not described in 'dw_edma_chip'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251101191524.1991135-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Abin Joseph <abin.joseph@amd.com>
Link: https://patch.msgid.link/20251027133232.392898-6-sakari.ailus@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027133232.392898-5-sakari.ailus@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20251027133232.392898-4-sakari.ailus@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027133232.392898-2-sakari.ailus@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027133232.392898-1-sakari.ailus@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There does not seem to be anything preventing the K3 UDMA drivers from
being compile tested (on arm64 as one dependency depends on ARM64) so
enable compile testing for wider build coverage.
Note that the ring accelerator dependency can only be selected when
"TI SOC drivers support" (SOC_TI) is enabled so select that option too.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161851.11242-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The purpose of this helper is to 'standardize' device pointer retrieval,
similar to the chan2dev() helper.
ddata2dev() helper returns the device pointer from struct dma_device stored
in stm32_dma3_ddata structure.
Device pointer from struct dma_device has been initialized with &pdev->dev,
so the ddata2dev helper returns &pdev->dev.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-4-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Depending on the power state reached during suspend, the CxSEMCR register
could have been reset, and the semaphore released.
On resume, try to take the semaphore again. If the semaphore cannot be
taken, an error log displaying the channel number and channel user is
generated.
This requires introducing two new functions:
stm32_dma3_pm_suspend(), where the status of each channel is checked
because suspension is not allowed if a channel is still running;
stm32_dma3_pm_resume(), where the channel semaphore is restored if it was
taken before suspend.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-3-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before restoring semaphore status after suspend, introduce new functions
to handle semaphore operations :
- stm32_dma3_get_chan_sem() to take the semaphore
- stm32_dma3_put_chan_sem() to release the semaphore
Also, use a new boolean variable semaphore_taken, which is true when the
semaphore has been taken and false when it has been released.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-2-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Without module_platform_driver(), stm32-dma3 doesn't have a
module_exit procedure. Once stm32-dma3 module is inserted, it
can't be removed, marked busy.
Use module_platform_driver() instead of subsys_initcall() to register
(insmod) and unregister (rmmod) stm32-dma3 driver.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-1-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"Accound" is an archaic spelling variant of "account". It had completely
fallen out of formal use as early as the 17th century, when the spelling
of Modern English became standardized. Here, it is corrected to "account"
to enhance comprehension.
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Link: https://patch.msgid.link/20251125015734.1572-1-chuguangqing@inspur.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Describe the need to initialize the phys field in the dma_async_tx_descriptor
structure during its initialization.
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251113064937.8735-1-bhanuseshukumar@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the DMA controller on the Renesas RZ/V2N SoC, which is
architecturally identical to the DMAC found on the RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251125212621.267397-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For easier maintenance and better readability order all includes
alphabetically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251106-qcom-bam-dma-refactor-v1-1-0e2baaf3d81a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251208020729.4654-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaT4RWBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVfSgEA23oY0kPjLLkNj4KAjLoWVPmZ/5efKw49
m6YUwfvzTS8BAIq4eFHVecwAM8FAe9NwuOKgO5d9u6epAy6wzBeP2jly
=cpHq
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmk8YxITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi702B/9Mfj0HQSAaWCyMz6GJAv8+1ijVTSbG
nTFeMmipYZhPn188OvWqHsf1cw9rWY0fzenIEW05Tk3YmMvYdeRmCcOkZdeG06xw
um8XxX4L8315E0b98CCpQpVa02ux7XoNtBPjeHccl8PEErJQgQJrQ3Cc/C8kk5U5
a0KlfeVRXYWkOPJva3+wosOu0t9QgJ9ABt5stqcvYDfdkKfvatQMBN3N1nNRKkFH
yhNPv+nRtypSk8jiHhKeeCVmosC0L7MnKuO593vDr761cY5mKrgKFqc2LLlPF6r0
/p13s5SG6X38RUegWCjcK4XRJAzVcR/tyod8LkVVp8d5DC/ptcyy8H+I
=h1gC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jbkd
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTsgBwAKCRDdBJ7gKXxA
jkSIAP4jD66nEC2QyKTiv9XvXi8rpKz6RGAHNZSam0ucI5WKswEAoflmlqsoD/Kk
sN3YLwLztzCJIYU7tT3IRaPK0irwDAo=
=nkux
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
- The 2 patch series "powerpc/pseries/cmm: two smaller fixes" from David
Hildenbrand fixes a couple of minor things in ppc land.
- The 4 patch series "Improve folio split related functions" from Zi Yan
provides some cleanups and minorish fixes in the folio splitting code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTseCwAKCRDdBJ7gKXxA
jkCLAP9ttvtG7zhDf+tqvjCJFnybPEo6Z2B4Qx9g8i7s27gTZgD8DzYbIl+YdxrN
/tS0tdgUfrJIXR2PzzipkydNrs+lxgg=
=T65o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
