commit 430f7803b6 upstream.
Make sure to drop the reference taken when looking up the UDMA platform
device.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Fixes: 1438cde8fe ("dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()")
Cc: stable@vger.kernel.org # 5.6: 1438cde8fe
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-17-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fc17b1c6d upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation.
Fixes: 42dbdcc6bf ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Cc: stable@vger.kernel.org # 4.4
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-15-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7e44db01 upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during dra7x route allocation.
Note that commit 615a4bfc42 ("dmaengine: ti: Add missing put_device in
ti_dra7_xbar_route_allocate") fixed the leak in the error paths but the
reference is still leaking on successful allocation.
Fixes: a074ae38f8 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Fixes: 615a4bfc42 ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate")
Cc: stable@vger.kernel.org # 4.2: 615a4bfc42
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-14-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1b590a590 upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-12-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd6e494388 upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-11-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747213b08a upstream.
After audio full duplex testing, playing the recorded file contains a few
playback frames from the previous time. The rz_dmac_terminate_all() does
not reset all the hardware descriptors queued previously, leading to the
wrong descriptor being picked up during the next DMA transfer. Fix the
above issue by resetting all the descriptor headers for a channel in
rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper
descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg().
Cc: stable@kernel.org
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fb4903239 upstream.
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral).
Fixes: 7de873201c ("dmaengine: sh: rz-dmac: Add RZ/V2H(P) support")
Cc: stable@vger.kernel.org # 6.16
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20251117161258.10679-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f747004bb upstream.
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9847e6d1d upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5d318b5959 ("dmaengine: Add dma router for pl08x in LPC32XX SoC")
Cc: stable@vger.kernel.org # 6.12
Cc: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4d63059de upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: e5f4ae84be ("dmaengine: add driver for lpc18xx dmamux")
Cc: stable@vger.kernel.org # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 799900f017 upstream.
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface.
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Cc: stable@vger.kernel.org # 5.15
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b18cd8b210 upstream.
When fsl_edma_alloc_chan_resources() fails after clk_prepare_enable(),
the error paths only free IRQs and destroy the TCD pool, but forget to
call clk_disable_unprepare(). This causes the channel clock to remain
enabled, leaking power and resources.
Fix it by disabling the channel clock in the error unwind path.
Fixes: d8d4355861 ("dmaengine: fsl-edma: add i.MX8ULP edma support")
Cc: stable@vger.kernel.org
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014090522.827726-1-zhen.ni@easystack.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec25e60f9f upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: 134d9c52fc ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support")
Cc: stable@vger.kernel.org # 5.19
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251117161258.10679-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bb7d696e0 upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: db7d07b5ad ("dmaengine: add driver for Sophgo CV18XX/SG200X dmamux")
Cc: stable@vger.kernel.org # 6.17
Cc: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c3a46ebf1 upstream.
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind.
Fixes: 743e1c8ffe ("dmaengine: Add Broadcom SBA RAID driver")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9074b2d7a upstream.
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3e ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Fixes: 3832b78b3e ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()")
Cc: stable@vger.kernel.org # 3.10: 3832b78b3e
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cf342a7c3 upstream.
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bf58cb728 upstream.
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d8553fc75 upstream.
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e65df3f77e upstream.
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ea5a3625 upstream.
The binding wants the node to be named "i2c-number", but those are named
"i2c-gpio-number" instead.
Thus rename those to i2c-0, i2c-1 to adhere to the binding and suppress
dtbs_check warnings.
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81e8cb7e50 upstream.
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4461754e6 upstream.
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf72b4b7bb upstream.
In vmw_compat_shader_add(), the return value check of vmw_shader_alloc()
is not proper. Modify the check for the return pointer 'res'.
Found by code review and compiled on ubuntu 20.04.
Fixes: 18e4a4669c ("drm/vmwgfx: Fix compat shader namespace")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251224091105.1569464-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9380dc33cd upstream.
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab3d4353b upstream.
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9bc6be0f upstream.
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80614c5098 upstream.
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6dff005fc upstream.
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 292e5757b2 upstream.
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28695ca09d upstream.
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52d3d115e9 upstream.
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee5007765 upstream.
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ad)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 762cf75bec upstream.
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a32 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9814cc832b upstream.
When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-3-sj@kernel.org
Fixes: c951cd3b89 ("mm/damon: implement a minimal stub for sysfs-based DAMON interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a24ca8ebb0 upstream.
Patch series "mm/damon/sysfs: free setup failures generated zombie sub-sub
dirs".
Some DAMON sysfs directory setup functions generates its sub and sub-sub
directories. For example, 'monitoring_attrs/' directory setup creates
'intervals/' and 'intervals/intervals_goal/' directories under
'monitoring_attrs/' directory. When such sub-sub directories are
successfully made but followup setup is failed, the setup function should
recursively clean up the subdirectories.
However, such setup functions are only dereferencing sub directory
reference counters. As a result, under certain setup failures, the
sub-sub directories keep having non-zero reference counters. It means the
directories cannot be removed like zombies, and the memory for the
directories cannot be freed.
The user impact of this issue is limited due to the following reasons.
When the issue happens, the zombie directories are still taking the path.
Hence attempts to generate the directories again will fail, without
additional memory leak. This means the upper bound memory leak is
limited. Nonetheless this also implies controlling DAMON with a feature
that requires the setup-failed sysfs files will be impossible until the
system reboots.
Also, the setup operations are quite simple. The certain failures would
hence only rarely happen, and are difficult to artificially trigger.
This patch (of 4):
When attrs/ DAMON sysfs directory setup is failed after setup of
intervals/ directory, intervals/intervals_goal/ directory is not cleaned
up. As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directory under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251225023043.18579-2-sj@kernel.org
Fixes: 8fbbcbeaaf ("mm/damon/sysfs: implement intervals tuning goal directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 392b3d9d59 upstream.
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-5-sj@kernel.org
Fixes: 9bbb820a5b ("mm/damon/sysfs: support DAMOS quotas")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7e1d75fd upstream.
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
quotas/ directory, subdirectories of quotas/ directory are not cleaned up.
As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-4-sj@kernel.org
Fixes: 1b32234ab0 ("mm/damon/sysfs: support DAMOS watermarks")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9132fbc2e upstream.
If damon_call() is executed against a DAMON context that is not running,
the function returns error while keeping the damon_call_control object
linked to the context's call_controls list. Let's suppose the object is
deallocated after the damon_call(), and yet another damon_call() is
executed against the same context. The function tries to add the new
damon_call_control object to the call_controls list, which still has the
pointer to the previous damon_call_control object, which is deallocated.
As a result, use-after-free happens.
This can actually be triggered using the DAMON sysfs interface. It is not
easily exploitable since it requires the sysfs write permission and making
a definitely weird file writes, though. Please refer to the report for
more details about the issue reproduction steps.
Fix the issue by making two changes. Firstly, move the final
kdamond_call() for cancelling all existing damon_call() requests from
terminating DAMON context to be done before the ctx->kdamond reset. This
makes any code that sees NULL ctx->kdamond can safely assume the context
may not access damon_call() requests anymore. Secondly, let damon_call()
to cleanup the damon_call_control objects that were added to the
already-terminated DAMON context, before returning the error.
Link: https://lkml.kernel.org/r/20251231012315.75835-1-sj@kernel.org
Fixes: 004ded6bee ("mm/damon: accept parallel damon_call() requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: JaeJoon Jung <rgbi3307@gmail.com>
Closes: https://lore.kernel.org/20251224094401.20384-1-rgbi3307@gmail.com
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9efe36b5e upstream.
When page isolation loops indefinitely during memory offline, reading
/proc/sys/vm/percpu_pagelist_high_fraction blocks on pcp_batch_high_lock,
causing hung task warnings.
Make procfs reads lock-free since percpu_pagelist_high_fraction is a
simple integer with naturally atomic reads, writers still serialize via
the mutex.
This prevents hung task warnings when reading the procfs file during
long-running memory offline operations.
[akpm@linux-foundation.org: add comment, per Michal]
Link: https://lkml.kernel.org/r/aS_y9AuJQFydLEXo@tiehlicka
Link: https://lkml.kernel.org/r/20251201060009.1420792-1-aboorvad@linux.ibm.com
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 590b13669b upstream.
crypto_alloc_acomp_node() may return ERR_PTR(), but the fail path checks
only for NULL and can pass an error pointer to crypto_free_acomp(). Use
IS_ERR_OR_NULL() to only free valid acomp instances.
Link: https://lkml.kernel.org/r/20251231074638.2564302-1-pbutsykin@cloudlinux.com
Fixes: 779b9955f6 ("mm: zswap: move allocations during CPU init outside the lock")
Signed-off-by: Pavel Butsykin <pbutsykin@cloudlinux.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f46c26f1bc upstream.
The 'numa_nodes_parsed' is defined in <asm/numa.h> but this file
is not included in mm/numa_memblks.c (build x86_64) so add this
to the incldues to fix the following sparse warning:
mm/numa_memblks.c:13:12: warning: symbol 'numa_nodes_parsed' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20260108101539.229192-1-ben.dooks@codethink.co.uk
Fixes: 8748270821 ("mm: introduce numa_memblks")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4795d205d7 upstream.
kmsan_free_page() is called by the page allocator's free_pages_prepare()
during page freeing. Its job is to poison all the memory covered by the
page. It can be called with an order-0 page, a compound high-order page
or a non-compound high-order page. But page_size() only works for order-0
and compound pages. For a non-compound high-order page it will
incorrectly return PAGE_SIZE.
The implication is that the tail pages of a high-order non-compound page
do not get poisoned at free, so any invalid access while they are free
could go unnoticed. It looks like the pages will be poisoned again at
allocation time, so that would bookend the window.
Fix this by using the order parameter to calculate the size.
Link: https://lkml.kernel.org/r/20260104134348.3544298-1-ryan.roberts@arm.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0edb475ac0 upstream.
The commit d2fe192348 (“nvme: only allow entering LIVE from CONNECTING
state”) disallows controller state transitions directly from RESETTING
to LIVE. However, the NVMe PCIe subsystem reset path relies on this
transition to recover the controller on PowerPC (PPC) systems.
On PPC systems, issuing a subsystem reset causes a temporary loss of
communication with the NVMe adapter. A subsequent PCIe MMIO read then
triggers EEH recovery, which restores the PCIe link and brings the
controller back online. For EEH recovery to proceed correctly, the
controller must transition back to the LIVE state.
Due to the changes introduced by commit d2fe192348 (“nvme: only allow
entering LIVE from CONNECTING state”), the controller can no longer
transition directly from RESETTING to LIVE. As a result, EEH recovery
exits prematurely, leaving the controller stuck in the RESETTING state.
Fix this by explicitly transitioning the controller state from RESETTING
to CONNECTING and then to LIVE. This satisfies the updated state
transition rules and allows the controller to be successfully recovered
on PPC systems following a PCIe subsystem reset.
Cc: stable@vger.kernel.org
Fixes: d2fe192348 ("nvme: only allow entering LIVE from CONNECTING state")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7517e899e1 upstream.
The memory bandwidth calculation relies on reading the hardware counter
and measuring the delta between samples. To ensure accurate measurement,
the software reads the counter frequently enough to prevent it from
rolling over twice between reads.
The default Memory Bandwidth Monitoring (MBM) counter width is 24 bits.
Hygon CPUs provide a 32-bit width counter, but they do not support the
MBM capability CPUID leaf (0xF.[ECX=1]:EAX) to report the width offset
(from 24 bits).
Consequently, the kernel falls back to the 24-bit default counter width,
which causes incorrect overflow handling on Hygon CPUs.
Fix this by explicitly setting the counter width offset to 8 bits (resulting
in a 32-bit total counter width) for Hygon CPUs.
Fixes: d8df126349 ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209062650.1536952-3-shenxiaochen@open-hieco.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ee98aabdc upstream.
Hygon CPUs supporting Platform QoS features currently undergo partial resctrl
initialization through resctrl_cpu_detect() in the Hygon BSP init helper and
AMD/Hygon common initialization code. However, several critical data
structures remain uninitialized for Hygon CPUs in the following paths:
- get_mem_config()-> __rdt_get_mem_config_amd():
rdt_resource::membw,alloc_capable
hw_res::num_closid
- rdt_init_res_defs()->rdt_init_res_defs_amd():
rdt_resource::cache
hw_res::msr_base,msr_update
Add the missing AMD/Hygon common initialization to ensure proper Platform QoS
functionality on Hygon CPUs.
Fixes: d8df126349 ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209062650.1536952-2-shenxiaochen@open-hieco.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e383f09614 upstream.
Commit 53326135d0 ("i2c: riic: Add suspend/resume support") added
suspend support for the Renesas I2C driver and following this change
on RZ/G3E the following WARNING is seen on entering suspend ...
[ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 134.285536] ------------[ cut here ]------------
[ 134.290298] i2c i2c-2: Transfer while suspended
[ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388
[ 134.365507] Tainted: [W]=WARN
[ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT)
[ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214
[ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214
[ 134.391717] sp : ffff800083f23860
[ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60
[ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001
[ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936
[ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006
[ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280
[ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09
[ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8
[ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000
[ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000
[ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80
[ 134.466851] Call trace:
[ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P)
[ 134.473715] i2c_smbus_xfer+0xbc/0x120
[ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84
[ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208]
[ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208]
[ 134.493226] __rtc_read_time+0x44/0x88
[ 134.497012] rtc_read_time+0x3c/0x68
[ 134.500622] rtc_suspend+0x9c/0x170
The warning is triggered because I2C transfers can still be attempted
while the controller is already suspended, due to inappropriate ordering
of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once
runtime PM disabled (in suspend_late()). During system resume, the I2C
controller will be available only after runtime PM is re-enabled
(in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is
still enabled. The I2C controller will remain available until the
suspend_noirq() callback (pm_runtime_force_suspend()) is called. During
resume, the I2C controller can be restored by the resume_noirq() callback
(pm_runtime_force_resume()). Finally, the resume() callback re-enables
autosuspend. As a result, the I2C controller can remain available until
the system enters suspend_noirq() and from resume_noirq().
Cc: stable@vger.kernel.org
Fixes: 53326135d0 ("i2c: riic: Add suspend/resume support")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
