Commit graph

1,029,448 commits

Author SHA1 Message Date
Stefan Wahren
1c701accec ARM: dts: Add Raspberry Pi 400 support
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:

- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08 23:06:34 +02:00
Stefan Wahren
5f30dacf37 ARM: dts: bcm283x: Fix up GPIO LED node names
Fix the node names for the GPIO LEDs to conform to the standard node
name led-..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08 23:06:34 +02:00
Stefan Wahren
224bd597a4 dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
Add new Raspberry Pi 400 to DT schema.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622981777-5023-5-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-06-08 23:06:34 +02:00
Coly Li
41fe8d088e bcache: avoid oversized read request in cache missing code path
In the cache missing code path of cached device, if a proper location
from the internal B+ tree is matched for a cache miss range, function
cached_dev_cache_miss() will be called in cache_lookup_fn() in the
following code block,
[code block 1]
  526         unsigned int sectors = KEY_INODE(k) == s->iop.inode
  527                 ? min_t(uint64_t, INT_MAX,
  528                         KEY_START(k) - bio->bi_iter.bi_sector)
  529                 : INT_MAX;
  530         int ret = s->d->cache_miss(b, s, bio, sectors);

Here s->d->cache_miss() is the call backfunction pointer initialized as
cached_dev_cache_miss(), the last parameter 'sectors' is an important
hint to calculate the size of read request to backing device of the
missing cache data.

Current calculation in above code block may generate oversized value of
'sectors', which consequently may trigger 2 different potential kernel
panics by BUG() or BUG_ON() as listed below,

1) BUG_ON() inside bch_btree_insert_key(),
[code block 2]
   886         BUG_ON(b->ops->is_extents && !KEY_SIZE(k));
2) BUG() inside biovec_slab(),
[code block 3]
   51         default:
   52                 BUG();
   53                 return NULL;

All the above panics are original from cached_dev_cache_miss() by the
oversized parameter 'sectors'.

Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate
the size of data read from backing device for the cache missing. This
size is stored in s->insert_bio_sectors by the following lines of code,
[code block 4]
  909    s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada);

Then the actual key inserting to the internal B+ tree is generated and
stored in s->iop.replace_key by the following lines of code,
[code block 5]
  911   s->iop.replace_key = KEY(s->iop.inode,
  912                    bio->bi_iter.bi_sector + s->insert_bio_sectors,
  913                    s->insert_bio_sectors);
The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from
the above code block.

And the bio sending to backing device for the missing data is allocated
with hint from s->insert_bio_sectors by the following lines of code,
[code block 6]
  926    cache_bio = bio_alloc_bioset(GFP_NOWAIT,
  927                 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS),
  928                 &dc->disk.bio_split);
The oversized parameter 'sectors' may trigger panic 2) by BUG() from the
agove code block.

Now let me explain how the panics happen with the oversized 'sectors'.
In code block 5, replace_key is generated by macro KEY(). From the
definition of macro KEY(),
[code block 7]
  71 #define KEY(inode, offset, size)                                  \
  72 ((struct bkey) {                                                  \
  73      .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode),     \
  74      .low = (offset)                                              \
  75 })

Here 'size' is 16bits width embedded in 64bits member 'high' of struct
bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is
very probably to be larger than (1<<16) - 1, which makes the bkey size
calculation in code block 5 is overflowed. In one bug report the value
of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors'
results the overflowed s->insert_bio_sectors in code block 4, then makes
size field of s->iop.replace_key to be 0 in code block 5. Then the 0-
sized s->iop.replace_key is inserted into the internal B+ tree as cache
missing check key (a special key to detect and avoid a racing between
normal write request and cache missing read request) as,
[code block 8]
  915   ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key);

Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey
size check BUG_ON() in code block 2, and causes the kernel panic 1).

Another kernel panic is from code block 6, is by the bvecs number
oversized value s->insert_bio_sectors from code block 4,
        min(sectors, bio_sectors(bio) + reada)
There are two possibility for oversized reresult,
- bio_sectors(bio) is valid, but bio_sectors(bio) + reada is oversized.
- sectors < bio_sectors(bio) + reada, but sectors is oversized.

From a bug report the result of "DIV_ROUND_UP(s->insert_bio_sectors,
PAGE_SECTORS)" from code block 6 can be 344, 282, 946, 342 and many
other values which larther than BIO_MAX_VECS (a.k.a 256). When calling
bio_alloc_bioset() with such larger-than-256 value as the 2nd parameter,
this value will eventually be sent to biovec_slab() as parameter
'nr_vecs' in following code path,
   bio_alloc_bioset() ==> bvec_alloc() ==> biovec_slab()
Because parameter 'nr_vecs' is larger-than-256 value, the panic by BUG()
in code block 3 is triggered inside biovec_slab().

From the above analysis, we know that the 4th parameter 'sector' sent
into cached_dev_cache_miss() may cause overflow in code block 5 and 6,
and finally cause kernel panic in code block 2 and 3. And if result of
bio_sectors(bio) + reada exceeds valid bvecs number, it may also trigger
kernel panic in code block 3 from code block 6.

Now the almost-useless readahead size for cache missing request back to
backing device is removed, this patch can fix the oversized issue with
more simpler method.
- add a local variable size_limit,  set it by the minimum value from
  the max bkey size and max bio bvecs number.
- set s->insert_bio_sectors by the minimum value from size_limit,
  sectors, and the sectors size of bio.
- replace sectors by s->insert_bio_sectors to do bio_next_split.

By the above method with size_limit, s->insert_bio_sectors will never
result oversized replace_key size or bio bvecs number. And split bio
'miss' from bio_next_split() will always match the size of 'cache_bio',
that is the current maximum bio size we can sent to backing device for
fetching the cache missing data.

Current problmatic code can be partially found since Linux v3.13-rc1,
therefore all maintained stable kernels should try to apply this fix.

Reported-by: Alexander Ullrich <ealex1979@gmail.com>
Reported-by: Diego Ercolani <diego.ercolani@gmail.com>
Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl>
Reported-by: Marco Rebhan <me@dblsaiko.net>
Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Reported-by: Victor Westerhuis <victor@westerhu.is>
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210607125052.21277-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-08 15:06:03 -06:00
Coly Li
1616a4c2ab bcache: remove bcache device self-defined readahead
For read cache missing, bcache defines a readahead size for the read I/O
request to the backing device for the missing data. This readahead size
is initialized to 0, and almost no one uses it to avoid unnecessary read
amplifying onto backing device and write amplifying onto cache device.
Considering upper layer file system code has readahead logic allready
and works fine with readahead_cache_policy sysfile interface, we don't
have to keep bcache self-defined readahead anymore.

This patch removes the bcache self-defined readahead for cache missing
request for backing device, and the readahead sysfs file interfaces are
removed as well.

This is the preparation for next patch to fix potential kernel panic due
to oversized request in a simpler method.

Reported-by: Alexander Ullrich <ealex1979@gmail.com>
Reported-by: Diego Ercolani <diego.ercolani@gmail.com>
Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl>
Reported-by: Marco Rebhan <me@dblsaiko.net>
Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Reported-by: Victor Westerhuis <victor@westerhu.is>
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210607125052.21277-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-08 15:06:03 -06:00
Jens Axboe
600abd3401 nvme updates for Linux 5.14
- improve the APST configuration algorithm (Alexey Bogoslavsky)
  - look for StorageD3Enable on companion ACPI device (Mario Limonciello)
  - allow selecting the network interface for TCP connections
    (Martin Belanger)
  - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmC/feMLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNddw/8CxvuW2rsPYp3ixhmCKP11e8o0mVeNjQBWp4ifeoN
 WutS/5e4mJzVdPIAzPyTh7CxCVXQLezJ2ucx9PKFxMvOPOCGAO/sq/QVeItoroLX
 ZH+hZWF9AVPBzKgyUoCQ25B+vCc0EeoMDvjraOHwlcgszJeW1WWbavuoLLfAbjjM
 xdG5TyNWijt0656Ru18NIYGqb3c2+ZZFC8ZMfoebH+uBDX2UI8QQxXfr7FErzt7s
 bjPWRYH629WOpqmi4ckFSFsffCBkBxrQM6Ef0rsOiSDo7nkvDTpUxNMvKMuMUD8T
 UmOTHwWtGD2/bXgA0u4R5xg9ky1g7md/lenoB1ReeG/rZVO76H1e6QRa8/W8i1U2
 ld6Ge9K8iqrtYP93+tvQOg7IbtMWHWDhUVma9J8RQprptA4e0790VQagyp26UKuh
 CHmCvhov+6uwSTr/w9HWE+LRnuRY9rgaLlwqn2itos07UhwRHS5mSeO9Eb/WtTfW
 dze8nPXUBsl/8jorsXQpZlKn6fAPJSSUlVnzXJecWDoWYwBuMeZMCNVEQGqZQYzg
 Y29STWKOQav2QHhJ8K7fTcWwx7fSE0JGOWY0fuF2okvhT069B14RSURRiXfYuJK2
 IMRddEdwrrFztvoYQDy8o8xksNLnpolBpT+SIE+Y80XZ8e5sohOXVbsaqP7YQhYb
 4W0=
 =OwBh
 -----END PGP SIGNATURE-----

Merge tag 'nvme-5.14-2021-06-08' of git://git.infradead.org/nvme into for-5.14/drivers

Pull NVMe updates from Christoph:

"nvme updates for Linux 5.14

 - improve the APST configuration algorithm (Alexey Bogoslavsky)
 - look for StorageD3Enable on companion ACPI device (Mario Limonciello)
 - allow selecting the network interface for TCP connections
   (Martin Belanger)
 - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, me)"

* tag 'nvme-5.14-2021-06-08' of git://git.infradead.org/nvme:
  nvmet: remove a superfluous variable
  nvmet: move ka_work initialization to nvmet_alloc_ctrl
  nvme: remove nvme_{get,put}_ns_from_disk
  nvme: split nvme_report_zones
  nvme: move the CSI sanity check into nvme_ns_report_zones
  nvme: add a sparse annotation to nvme_ns_head_ctrl_ioctl
  nvme: open code nvme_put_ns_from_disk in nvme_ns_head_ctrl_ioctl
  nvme: open code nvme_{get,put}_ns_from_disk in nvme_ns_head_ioctl
  nvme: open code nvme_put_ns_from_disk in nvme_ns_head_chr_ioctl
  nvme-fabrics: remove extra braces
  nvme-fabrics: remove an extra comment
  nvme-fabrics: remove extra new lines in the switch
  nvme-fabrics: fix the kerneldco comment for nvmf_log_connect_error()
  nvme-tcp: allow selecting the network interface for connections
  nvme-pci: look for StorageD3Enable on companion ACPI device instead
  nvme: extend and modify the APST configuration algorithm
  nvme: remove redundant initialization of variable ret
2021-06-08 15:02:21 -06:00
Liangyan
3e08a9f976 tracing: Correct the length check which causes memory corruption
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,

Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS:  00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009]  anon_vma_clone+0x5d/0x170
[1640542.567417]  __split_vma+0x91/0x1a0
[1640542.567777]  do_munmap+0x2c6/0x320
[1640542.568128]  vm_munmap+0x54/0x70
[1640542.569990]  __x64_sys_munmap+0x22/0x30
[1640542.572005]  do_syscall_64+0x5b/0x1b0
[1640542.573724]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27

James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[   86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[   86.780806]  no_context+0xdf/0x3c0
[   86.784327]  __do_page_fault+0x252/0x470
[   86.788367]  do_page_fault+0x32/0x140
[   86.792145]  page_fault+0x1e/0x30
[   86.795576]  strncpy_from_unsafe+0x66/0xb0
[   86.799789]  fetch_memory_string+0x25/0x40
[   86.804002]  fetch_deref_string+0x51/0x60
[   86.808134]  kprobe_trace_func+0x32d/0x3a0
[   86.812347]  kprobe_dispatcher+0x45/0x50
[   86.816385]  kprobe_ftrace_handler+0x90/0xf0
[   86.820779]  ftrace_ops_assist_func+0xa1/0x140
[   86.825340]  0xffffffffc00750bf
[   86.828603]  do_sys_open+0x5/0x1f0
[   86.832124]  do_syscall_64+0x5b/0x1b0
[   86.835900]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

commit b220c049d5 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow.

Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: b220c049d5 ("tracing: Check length before giving out the filter buffer")
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com>
Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Tested-by: James Wang <jnwang@linux.alibaba.com>
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08 16:44:00 -04:00
Steven Rostedt (VMware)
6c14133d2d ftrace: Do not blindly read the ip address in ftrace_bug()
It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.

Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.

Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/

Cc: stable@vger.kernel.org
Fixes: 05736a427f ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08 16:44:00 -04:00
Masami Hiramatsu
824afd55e9 tools/bootconfig: Fix a build error accroding to undefined fallthrough
Since the "fallthrough" is defined only in the kernel, building
lib/bootconfig.c as a part of user-space tools causes a build
error.

Add a dummy fallthrough to avoid the build error.

Link: https://lkml.kernel.org/r/162087519356.442660.11385099982318160180.stgit@devnote2

Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 4c1ca831ad ("Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08 16:44:00 -04:00
Zhen Lei
e8ba0b2b64 tools/bootconfig: Fix error return code in apply_xbc()
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Link: https://lkml.kernel.org/r/20210508034216.2277-1-thunder.leizhen@huawei.com

Fixes: a995e6bc05 ("tools/bootconfig: Fix to check the write failure correctly")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-08 16:43:59 -04:00
Roberto Sassu
531bf6a88d ima: Pass NULL instead of 0 to ima_get_action() in ima_file_mprotect()
This patch fixes the sparse warning:

sparse: warning: Using plain integer as NULL pointer

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 16:29:10 -04:00
Roberto Sassu
8c559415f6 ima: Include header defining ima_post_key_create_or_update()
This patch fixes the sparse warning for ima_post_key_create_or_update() by
adding the header file that defines the prototype (linux/ima.h).

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 16:29:10 -04:00
Roberto Sassu
6b26285f44 ima/evm: Fix type mismatch
The endianness of a variable written to the measurement list cannot be
determined at compile time, as it depends on the value of the
ima_canonical_fmt global variable (set through a kernel option with the
same name if the machine is big endian).

If ima_canonical_fmt is false, the endianness of a variable is the same as
the machine; if ima_canonical_fmt is true, the endianness is little endian.
The warning arises due to this type of instruction:

var = cpu_to_leXX(var)

which tries to assign a value in little endian to a variable with native
endianness (little or big endian).

Given that the variables set with this instruction are not used in any
operation but just written to a buffer, it is safe to force the type of the
value being set to be the same of the type of the variable with:

var = (__force <var type>)cpu_to_leXX(var)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 16:29:10 -04:00
Roberto Sassu
24c9ae23bd ima: Set correct casting types
The code expects that the values being parsed from a buffer when the
ima_canonical_fmt global variable is true are in little endian. Thus, this
patch sets the casting types accordingly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 16:29:10 -04:00
Roberto Sassu
22a558f567 doc: Fix warning in Documentation/security/IMA-templates.rst
This patch fixes the warning:

Documentation/security/IMA-templates.rst:81: WARNING: Inline
substitution_reference start-string without end-string.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 16:29:10 -04:00
Borislav Petkov
ec35d1d93b x86/setup: Document that Windows reserves the first MiB
It does so unconditionally too, on Intel and AMD machines, to work
around BIOS bugs, as confirmed by Microsoft folks (see Link for full
details).

Reflow the paragraph, while at it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/MWHPR21MB159330952629D36EEDE706B3D7379@MWHPR21MB1593.namprd21.prod.outlook.com
2021-06-08 22:26:43 +02:00
Joe Stringer
380afe7208 selftests, bpf: Make docs tests fail more reliably
Previously, if rst2man caught errors, then these would be ignored and
the output file would be written anyway. This would allow developers to
introduce regressions in the docs comments in the BPF headers.

Additionally, even if you instruct rst2man to fail out, it will still
write out to the destination target file, so if you ran the tests twice
in a row it would always pass. Use a temporary file for the initial run
to ensure that if rst2man fails out under "--strict" mode, subsequent
runs will not automatically pass.

Tested via ./tools/testing/selftests/bpf/test_doc_build.sh

Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io
2021-06-08 22:04:35 +02:00
Mark Bloch
edc0b0bccc RDMA/mlx5: Block FDB rules when not in switchdev mode
Allow creating FDB steering rules only when in switchdev mode.

The only software model where a userspace application can manipulate
FDB entries is when it manages the eswitch. This is only possible in
switchdev mode where we expose a single RDMA device with representors
for all the vports that are connected to the eswitch.

Fixes: 52438be441 ("RDMA/mlx5: Allow inserting a steering rule to the FDB")
Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-08 17:02:15 -03:00
Michal Suchanek
edc0571c5f libbpf: Fix pr_warn type warnings on 32bit
The printed value is ptrdiff_t and is formatted wiht %ld. This works on
64bit but produces a warning on 32bit. Fix the format specifier to %td.

Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210604112448.32297-1-msuchanek@suse.de
2021-06-08 22:02:10 +02:00
Jean-Philippe Brucker
0779890fed tools/bpftool: Fix cross-build
When the bootstrap and final bpftool have different architectures, we
need to build two distinct disasm.o objects. Add a recipe for the
bootstrap disasm.o.

After commit d510296d33 ("bpftool: Use syscall/loader program in
"prog load" and "gen skeleton" command.") cross-building bpftool didn't
work anymore, because the bootstrap bpftool was linked using objects
from different architectures:

  $ make O=/tmp/bpftool ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/bpftool/ V=1
  [...]
  aarch64-linux-gnu-gcc ... -c -MMD -o /tmp/bpftool/disasm.o /home/z/src/linux/kernel/bpf/disasm.c
  gcc ... -c -MMD -o /tmp/bpftool//bootstrap/main.o main.c
  gcc ... -o /tmp/bpftool//bootstrap/bpftool /tmp/bpftool//bootstrap/main.o ... /tmp/bpftool/disasm.o
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: error adding symbols: file in wrong format
  collect2: error: ld returned 1 exit status
  [...]

The final bpftool was built for e.g. arm64, while the bootstrap bpftool,
executed on the host, was built for x86. The problem here was that disasm.o
linked into the bootstrap bpftool was arm64 rather than x86. With the fix
we build two disasm.o, one for the target bpftool in arm64, and one for
the bootstrap bpftool in x86.

Fixes: d510296d33 ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210603170515.1854642-1-jean-philippe@linaro.org
2021-06-08 21:59:08 +02:00
Baokun Li
ac477efcf0 RDMA/irdma: Use list_move instead of list_del/list_add
Using list_move() instead of list_del() + list_add().

Link: https://lore.kernel.org/r/20210608031041.2820429-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-08 16:55:41 -03:00
David S. Miller
df693f13a1 Here is a batman-adv bugfix:
- Avoid WARN_ON timing related checks, by Sven Eckelmann
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmC/jIAWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoUH2EADQsRykhV9yWmfQv5rksqbDmZ/v
 t9HiY8VT0rZjGFt59o2I870KIJ1F7yZ9yEAbHqdLo08AvuRHxYhqpgIckstsHGSG
 iKnXH8ZA774rExCfT79VHifAtoFu+rnxuC1m5iSbrdoE5eOg+8R4uK22mPGh4eO9
 k0+RNJi8AQn0c744+ssQRvk7MbUy5g2csqcDgoT6b3Op7b8bsAR3mCrNAacnwLnS
 KxvQDAR1u9PBr+waMF+ZIvn2+Mh5dfs2DMPySfuj37KNg8bdWuJdJBGY4fiqGx19
 Rr/uo1N2BDo85tp5MWKenGDwipK70uqjaNKPx/81WZIlw2hfuDzqkxTQ/QRj7rlu
 qe7D6ymMoyTVmUz+/HR1FVpMAq4iY8/kQrTQIz6W2VTeTfjt3jnBtwMBH2C/IZLW
 UOCZ+jvWtepxYPSP4Wel8PAt+mcuiYias6v85MM67S6ZN2C0qwvOKmcX8dt0acGB
 k1nKVLyhyPESD/PgSmGW+s15eszjzsA+XIjCvVIUu4+wnTd14SdpgUJNJhIhw1xF
 rqSMNx8wm9yVZ8D8+hJP8o0hLZn78YTdvJx7ctfK4xL4cJBXjDXxK4quZH8BvclI
 QDQmosGaUw/add0PNISmMYFG7olClf0RW8L7RQpByK0osyx2gK/KJV3UJNzAXH8m
 jnWDML4WizDRg5PJlw==
 =eTBp
 -----END PGP SIGNATURE-----

Merge tag 'batadv-net-pullrequest-20210608' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - Avoid WARN_ON timing related checks, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:11:21 -07:00
David S. Miller
303597e49b This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
 
  - consistently send iface index/name in genlmsg, by Sven Eckelmann
 
  - improve broadcast queueing, by Linus Lüssing (2 patches)
 
  - add support for routable IPv4 multicast with bridged setups,
    by Linus Lüssing
 
  - remove repeated declarations, by Shaokun Zhang
 
  - fix spelling mistakes, by Zheng Yongjun
 
  - clean up hard interface handling after dropping sysfs support,
    by Sven Eckelmann (4 patches)
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmC/izUWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeofECEADS3YF/XZw/CpLPETGLFfEg+hlE
 jYKPTq0enAgaEbiJuiHAI4hvdPAxD3bOGUhOU/QIMyfzJ5NVRkX1hc7A04v7HAZk
 fxsKI6OUQShL0ld3pFH3lNE+gnsDsHnAF8eIL/dJRVCLekxWO3jSI0VlPasGn0zG
 /kXugSrWV7z/fGDGmDAVE47LvTq0sCsiqDVwNZH869biYpIRh7D03EAvPkBx2UY/
 StdgBC5jUED0DgJgtlmxil8Kei8gHIme1iRXnBR951vKAboyRo3bR72QkRQPoIZk
 l9lvFnaSAMcL9B/pcCZElmFVkkQY7h3nVw4vsyc7MbR5CKAnLMDJHyqXnnXAmStG
 gxR2pa54uD4hwcxax6CaTR1xhmSSFnAz8vZCaEpAyPjeU2Lt05Et1Ikv+y0Vlp3m
 te0M+aHu1leMjRtNye1nNDem7ubZ4kjhOFJM8YGfsQgcK0pZz0GayWiafheIguSW
 CNDCe52FvNzIOyjB6CeXS3iAWHckjIpBRXaBMg0uGWb7LFNXRfhg5HX02827usrS
 GOZ0+wq09RIc3vbgQ6c2JXSNGJ6ICa2NdNxosukzOQRquqEkGO8y+SlSKSSHZMbB
 mbkPJ/BnhEiTH9fkDMnPkNYYKy/6TuiFejxsmNrwBAd+MHYHJ8fBaGgNoWGRCfLY
 ygrNafDNE+Visz3wCw==
 =+IDL
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-pullrequest-20210608' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
pull request for net-next: batman-adv 2021-06-08

here is a feature/cleanup pull request of batman-adv to go into net-next.

Please pull or let me know of any problem!

This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - consistently send iface index/name in genlmsg, by Sven Eckelmann

 - improve broadcast queueing, by Linus Lüssing (2 patches)

 - add support for routable IPv4 multicast with bridged setups,
   by Linus Lüssing

 - remove repeated declarations, by Shaokun Zhang

 - fix spelling mistakes, by Zheng Yongjun

 - clean up hard interface handling after dropping sysfs support,
   by Sven Eckelmann (4 patches)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:10:26 -07:00
Geert Uytterhoeven
7624115420 nvme: NVME_TCP_OFFLOAD should not default to m
The help text for the symbol controlling support for the NVM Express
over Fabrics TCP offload common layer suggests to not enable this
support when unsure.

Hence drop the "default m", which actually means "default y" if
CONFIG_MODULES is not enabled.

Fixes: f0e8cb6106 ("nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:06:19 -07:00
David S. Miller
1a61fed9f7 Merge branch 'farsync-cleanups'
Peng Li says:

====================
net: farsync: clean up some code style issues

This patchset clean up some code style issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
f23a3da78a net: farsync: replace comparison to NULL with "fst_card_array[i]"
According to the chackpatch.pl, comparison to NULL could
be written "fst_card_array[i]".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
f01f906ffe net: farsync: remove redundant return
Void function return statements are not generally useful.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
d2a1054b8b net: farsync: fix the alignment issue
Alignment should match open parenthesis.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
ae1be3fad5 net: farsync: remove redundant parentheses
Unnecessary parentheses around 'port->hwif == X21'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
b64b5aee73 net: farsync: remove redundant spaces
According to the chackpatch.pl,
space prohibited between function name and open parenthesis '(',
no space is necessary after a cast.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
fa8d10b547 net: farsync: remove redundant braces {}
This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for single statement blocks".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
37947a9be3 net: farsync: add some required spaces
Add spaces required around that '=' and '*'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
7619ab1618 net: farsync: fix the code style issue about macros
Macros with complex values should be enclosed in parentheses.
space required after that ',' .

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
3a950181f6 net: farsync: code indent use tabs where possible
Code indent should use tabs where possible.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
d70711da30 net: farsync: remove trailing whitespaces
This patch removes trailing whitespaces.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
14b9764ccf net: farsync: fix the comments style issue
Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
8ccac4a58a net: farsync: remove redundant initialization for statics
Should not initialise statics to 0.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
40996bcfe9 net: farsync: move out assignment in if condition
Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:05 -07:00
Peng Li
8ea4bfb30a net: farsync: fix the code style issue about "foo* bar"
Fix the checkpatch error as "foo * bar" should be "foo *bar".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:04 -07:00
Peng Li
50d4c36336 net: farsync: add blank line after declarations
This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:04 -07:00
Peng Li
34de4c85f3 net: farsync: remove redundant blank lines
This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 12:04:04 -07:00
Suren Baghdasaryan
3958e2d0c3 cgroup: make per-cgroup pressure stall tracking configurable
PSI accounts stalls for each cgroup separately and aggregates it at each
level of the hierarchy. This causes additional overhead with psi_avgs_work
being called for each cgroup in the hierarchy. psi_avgs_work has been
highly optimized, however on systems with large number of cgroups the
overhead becomes noticeable.
Systems which use PSI only at the system level could avoid this overhead
if PSI can be configured to skip per-cgroup stall accounting.
Add "cgroup_disable=pressure" kernel command-line option to allow
requesting system-wide only pressure stall accounting. When set, it
keeps system-wide accounting under /proc/pressure/ but skips accounting
for individual cgroups and does not expose PSI nodes in cgroup hierarchy.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2021-06-08 14:59:02 -04:00
Nicolas Dichtel
9bb392f624 vrf: fix maximum MTU
My initial goal was to fix the default MTU, which is set to 65536, ie above
the maximum defined in the driver: 65535 (ETH_MAX_MTU).

In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to
IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default.

Let's also, for consistency, set the mtu in vrf_setup(). This function
calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config
is done in the same function.

Before the patch:
$ ip link add blue type vrf table 1234
$ ip link list blue
9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff
$ ip link set dev blue mtu 65535
$ ip link set dev blue mtu 65536
Error: mtu greater than device maximum.

Fixes: 5055376a3b ("net: vrf: Fix ping failed when vrf mtu is set to 0")
CC: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:46:23 -07:00
David S. Miller
5552571c65 Merge branch 'realtek-dt'
Joakim Zhang says:

====================
net: phy: add dt property for realtek phy

Add dt property for realtek phy.

---
ChangeLogs:
V1->V2:
	* store the desired PHYCR1/2 register value in "priv" rather than
	using "quirks", per Russell King suggestion, as well as can
	cover the bootloader setting.
	* change the behavior of ALDPS mode, default is disabled, add dt
	property for users to enable it.
	* fix dt binding yaml build issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:41:24 -07:00
Joakim Zhang
6813cc8cfd net: phy: realtek: add delay to fix RXC generation issue
PHY will delay about 11.5ms to generate RXC clock when switching from
power down to normal operation. Read/write registers would also cause RXC
become unstable and stop for a while during this process. Realtek engineer
suggests 15ms or more delay can workaround this issue.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:41:24 -07:00
Joakim Zhang
d90db36a9e net: phy: realtek: add dt property to enable ALDPS mode
If enable Advance Link Down Power Saving (ALDPS) mode, it will change
crystal/clock behavior, which cause RXC clock stop for dozens to hundreds
of miliseconds. This is comfirmed by Realtek engineer. For some MACs, it
needs RXC clock to support RX logic, after this patch, PHY can generate
continuous RXC clock during auto-negotiation.

ALDPS default is disabled after hardware reset, it's more reasonable to
add a property to enable this feature, since ALDPS would introduce side effect.
This patch adds dt property "realtek,aldps-enable" to enable ALDPS mode
per users' requirement.

Jisheng Zhang enables this feature, changes the default behavior. Since
mine patch breaks the rule that new implementation should not break
existing design, so Cc'ed let him know to see if it can be accepted.

Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:41:24 -07:00
Joakim Zhang
0a4355c2b7 net: phy: realtek: add dt property to disable CLKOUT clock
CLKOUT is enabled by default after PHY hardware reset, this patch adds
"realtek,clkout-disable" property for user to disable CLKOUT clock
to save PHY power.

Per RTL8211F guide, a PHY reset should be issued after setting these
bits in PHYCR2 register. After this patch, CLKOUT clock output to be
disabled.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:41:23 -07:00
Joakim Zhang
a9f15dc2b9 dt-bindings: net: add dt binding for realtek rtl82xx phy
Add binding for realtek rtl82xx phy.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:41:23 -07:00
gushengxian
d439aa33a9 net: appletalk: fix the usage of preposition
The preposition "for" should be changed to preposition "of".

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:37:41 -07:00
Zheng Yongjun
5ac6b198d7 net: ipv4: Remove unneed BUG() function
When 'nla_parse_nested_deprecated' failed, it's no need to
BUG() here, return -EINVAL is ok.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 11:36:48 -07:00