Brightness and contrast are handled through V4L2 controls. Their
configuration bit in the preview engine update attributes table is set
to -1 to reflect that. However, the VIDIOC_OMAP3ISP_PRV_CFG ioctl
handler doesn't handle -1 correctly as a configuration bit value, and
erroneously considers that the parameter has been selected for update by
the ioctl caller. Fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When propagating the frame number through the pipeline, the frame number
must be incremented at frame start by the appropriate IRQ handler. This
was properly handled for the CSI2 and CCP2 receivers, but not when the
CCDC parallel interface is used.
ADD frame number incrementation to the HS/VS interrupt handler. As the
HS/VS interrupt is also generated for frames received by the CSI2 and
CCP2 receivers, remove explicit propagation handling from the serial
receivers.
Reported-by: Kruno Mrak <kruno.mrak@matrix-vision.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
iommu_domain_free() was called in isp_remove() before omap3isp_put().
omap3isp_put() must not save the context if the IOMMU no longer is there.
Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The OMAP3 ISP preview engine will violate the L4 bus protocol if we try
to write some of its internal registers after it failed to stop
properly. This generates an external abort on non-linefetch fault,
triggering a fatal kernel oops.
We can't always prevent preview engine stop failures (they can for
instance be caused by a sensor crash), but we can improve the system
reliability by refusing to start streaming on a pipeline that contains
the preview engine if it failed to stop. The driver will then eventually
reset the ISP (when all applications will have closed their file handles
related to OMAP3 ISP device nodes), making the ISP usable again.
Fixes: NB#291334 - camera: Recover gracefully from ISP crash instead of oopsing
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Reviewed-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The get_unmapped_area() operation was forgotten during conversion to
videobuf2. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Properly validate the user-supplied index against the number of inputs.
The code used the pin local variable instead of the index by mistake.
Reported-by: Jozef Vesely <vesely@gjh.sk>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In case of short marker, the number of received packets was not
incremented doing a zero divide when computing the filling rate.
Reported-by: Hans Petter Selasky <hans.petter.selasky@bitfrost.no>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, the register prefixes in the driver seem to be mixed: the
capability registers are the ones that contain capability information,
such as number of hardware endpoints, while the registers that are
used to program the controller are called operational registers.
Normally, capability registers start at 0x100 offset of the register
window and are followed by operational registers. In some versions,
however, capability registers start at 0x0 offset.
This patch renames the register and adjusts their offsets appropriately,
leaving the possibility of having a non-standard capability offset.
I couldn't find any mentions of the TESTMODE register anywhere, so I
suspect it might only be enabled in chipidea internal versions of the
controller and I'm really inclined to remove it from the driver or at
least hiding it behind a config option.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ep0{out,in} are never on gadget's ep_list, there's no need to try
to unlink them, even more so because ep_list linkage is not initialized
for these endpoints.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Davinci USB platform device (in mach-davinci/usb.c) uses "ohci"
as the name. To allow autoloading of the relevant driver, the module
needs to set the MODULE_ALIAS.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With old mxs clock support removed, the timer_clk argument of
mxs_timer_init is unused now, so remove it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Commit d29f3ef39b
"tty_lock: Localise the lock"
added a tty arg to wait_event_interruptible_tty() but it missed
this arch specific instance for cris, causing a compile failure.
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
error: implicit declaration of function 'mmci_dt_populate_generic_pdata'
This is due to the '#if CONFIG_OF' guards placed around
mmci_dt_populate_generic_pdata(), but not around the call to it. We
repair this by inserting a stub which elegantly returns when CONFIG_OF
is not set.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
These two functions are actually hw-specific and only valid for gm45
thru gen7. HSW completely changes how this works, so label them
accordingly.
v2: s/gm45/g4x/ like for the previous patch.
Acked-by: Paulo Zanoni <przanoni@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Generally we call stuff with i9xx_ when it's valid for gen3+. But
gen3 and early gen4 only support hdmi with sdvo cards, and writing
infoframes works completely different there.
v2: Use g4x instead of gm45 - it applies to the desktop variant, too.
v3: Properly align the paramters of g4x_write_infoframe again, noticed
by Paulo Zanoni.
Acked-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Simplifies things because for all the infoframes we care about,
we always send them on each vblank. Also, this gets rid of one
of the hw specific functions mislabelled with the intel_ prefix -
hsw will completely change how this works!
Acked-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The principle of intel_mark_busy() is that we want to spot the
transition of when the display engine is being used in order to bump
powersaving modes and increase display clocks. As such it is only
important when the display is changing, i.e. when rendering to the
scanout or other sprite/plane, and these are characterised by being
pinned.
v2: Mark the whole device as busy on execbuffer and pageflips as well
and rebase against dinq for the minor bug fix to be immediately
applicable.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: fix compile fail.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_wait_for_vblank uses PIPESTAT, which does not exist on Ironlake
and newer, so now we use PIPEFRAME.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Ditch the check for disable pipe from the new ilk wait for
vblank function to keep it consisten with existing behaviour.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like Gen 4, IBX has a "Port Select" field on the DIP register,
but the ports are different.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
IBX does not need the workaround used in cpt_write_infoframe that
requires the AVI frame to be enabled while being updated.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The registers are on the PCH, so use the PCH name instead of the CPU
name. Also, the way this function is implemented is really only for
CPT and PPT. For now, both functions have the same implementations:
the next patch will fix ibx_write_infoframe.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Better safe than sorry. Currently we never change the frequency and
use the same for every infoframe type, so the only way to reproduce a
bug would be with the BIOS doing something.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
That's what the VIDEO_DIP_CTL documentation says we need to do. Except
when it's the AVI InfoFrame and we're ironlake_write_infoframe.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will allow us to disable an infoframe without changing its
frequency.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Include the header to pickup the definitions of the exported symbols.
Quiets the following sparse warnings:
warning: symbol 'vb2_dma_contig_memops' was not declared. Should it be static?
warning: symbol 'vb2_dma_contig_init_ctx' was not declared. Should it be static?
warning: symbol 'vb2_dma_contig_cleanup_ctx' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The function vb2_dma_contig_vaddr returns a void * not an integer.
Quiets the sparse noise:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The vb2_get_vma() function is called by videobuf2-dma-contig. Export it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The commit 3b4c34aac7
"s5p-fimc: Add support for VIDIOC_PREPARE_BUF/CREATE_BUFS ioctls"
added a handler for VIDIOC_CREATE_BUFS ioctl, but the queue_setup
callback wasn't updated to properly interpret the pixel format.
In this situation memory corruption may happen with VIDIOC_CREATE_BUFS
ioctl. Update the queue_setup op to fix this.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When setting TRY crop on the sub-device the mutex was erroneously acquired
rather than released on exit path. This bug is present in kernels starting
from v3.2.
Cc: stable@vger.kernel.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Should prevent bugs when changing the port.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure we're doing the right thing, just like we do on gen5+.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't use intermediate variables, change the value of 'val' as we go
through the function. The new style looks more similar to the rest of
our code. IMHO, it's also easier to read and change.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gen3+ is 13 bits (12:0), and on gen2 only 12 (11:0). For both the high
bits are marked reserved, read-only so continue to mask them. Bit 31
is not reserved and has a meaning.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix multiple stylistic issue like:
- The print message should be not break into multiple line.
- line gap after variable declaration and statement.
- checkpatch error.
- some typo.
Some enhancement on error message printing to print error value
also along with proper text.
Avoid voltage_base conversion to microvolts every time.
Put init functions in init section.
Using efficient function inplace of calling multiple function
to reduce the code size.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Backmerge of drm-next to resolve a few ugly conflicts and to get a few
fixes from 3.4-rc6 (which drm-next has already merged). Note that this
merge also restricts the stencil cache lra evict policy workaround to
snb (as it should) - I had to frob the code anyway because the
CM0_MASK_SHIFT define died in the masked bit cleanups.
We need the backmerge to get Paulo Zanoni's infoframe regression fix
for gm45 - further bugfixes from him touch the same area and would
needlessly conflict.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Changeset 5bfaadde broke zig-zag for DVB-S drivers that don't
implement get_tune_settings() callback.
Fix the code, in order to allow it to work as before, otherwise
some channels may not be tuned anymore.
Fix Fedora Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=814404
Cc: stable@kernel.org # for Kernel v3.3
Reported-by: Michael Heijenga <database.worker@googlemail.com>
Tested-by: Michael Heijenga <database.worker@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
kick_all_cpus_sync() is the core implementation of cpu_idle_wait()
which is copied all over the arch code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120507175652.119842173@linutronix.de
This patch supports the PM for hdmi and mixer. Turn off hdmi and mixer
when suspended, and when resume, will turn on them by hdmi hotplug
detection if hdmi is attached.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The power and clocks turns on always in exynos hdmi and mixer driver,
but we should turn off the power and clocks of exynos hdmi and mixer
when the hdmi cable unplugged or when hdmi unused.
There are two interrupt to detect hotplug of hdmi cable - internal
interrupt and external interrupt. The internal interrupt can use only
when hdmi is dpms on so if hdmi is dpms off, we should use external
interrupt to detect hotplug of hdmi cable. If hdmi is dpms on, we cannot
external interrupt because the gpio pin for external interrupt is used
to hdmi HPD pin for internal interrupt.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We can use irq thread instead of workqueue
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>