Commit graph

153,333 commits

Author SHA1 Message Date
Vasanthakumar Thiagarajan
1881ced596 ath6kl: Update netstats for some of the tx failrues in ath6kl_data_tx()
There are few cases where the tx skb is dropped but netstats is
not updated, fix this.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-30 10:54:52 +03:00
Ashish Jangam
eead75a2b4 Input: add support for DA9052/53 touch screen controller
This driver adds support for DA9052/53 4-wire resistive ADC interfaced
touchscreen controller. DA9052/53 is a multi-function device, therefore
this driver depends on DA9052/53 core.

This patch is functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 23:37:15 -07:00
Dave Airlie
2baf837799 drm/edid: fix collision between two patches breaking build
this fixes a report that the new load code needed to be updated for
ajax's validity changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-30 07:26:16 +01:00
Ben Skeggs
b99da31ed8 drm/nv10/gpio: fix thinko in mask for gpio lines 2-9
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30 15:55:54 +10:00
Christoph Bumiller
ffc6a4e49e nvc0/fb: shut up PMFB interrupt after the first occurrence
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30 15:55:46 +10:00
Ben Skeggs
0ed4bb92f5 drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30 15:55:39 +10:00
Ben Skeggs
5206b524c9 drm/nouveau/bios: fix regression on some nv4x board
We started using the connector table on nv4x a while back, and this VBIOS
has bad connector indices which causes the wrong encoders to get paired
with connectors.

Add a quirk to fix this...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30 15:55:22 +10:00
Shawn Landden
df052676e5 Input: usbtouchscreen - only expose e2i configure option in expert mode
as is the case of all other devices supported by usbtouchscreen.c

Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE)

Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 22:53:56 -07:00
Shawn Landden
41baf6368e Input: usbtouchscreen - fix typo
Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 22:53:52 -07:00
Benjamin Herrenschmidt
6cd3209967 powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5
This replaces the old therm_pm72 using the same windfarm infrastructure
that was used for other PowerMac G5 models. The fan speeds and sensors
should now be visible in the same location in sysfs.

The driver is split into separate core modules for PowerMac7,2 (and 7,3)
and RackMac3,1, with a lot of the shared code now in the separate sensor
and control modules.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:25 +10:00
Benjamin Herrenschmidt
a78a4a03a7 powerpc/windfarm: Add Fan Control Unit controls for G5s
The FCU operates the fans on the earlier generation G5 machines,
this module will be used by upcoming windfarm drivers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:25 +10:00
Benjamin Herrenschmidt
d839ba2ab2 powerpc/windfarm: Updates to lm75 and max6690 sensors
This allows those modules to load on PowerMac7,2 PowerMac7,3
and RackMac3,1 and add the sensor name conversion for those
machines.

This will be used by the corresponding new windfarm modules
for those machines.

Note that since therm_pm72 is linked first, it will still
take priority on those i2c devices if built-in. If using modules
it will depend which is loaded first, but you should avoid building
therm_pm72 if you are using the new windfarm drivers

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:24 +10:00
Benjamin Herrenschmidt
08fe5bc75f powerpc/windfarm: Add lm87 sensor
For use by the upcoming windfarm_rm31

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:21 +10:00
Benjamin Herrenschmidt
850dc32168 powerpc/windfarm: Add ad7417 sensor
For user by the upcoming windfarm_pm72 and windfarm_rm31

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:21 +10:00
Benjamin Herrenschmidt
33e6820b76 powerpc/windfarm: Add useful accessors
Makes the code more readable

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:20 +10:00
Benjamin Herrenschmidt
ea5c64b067 powerpc/windfarm: Improve display of fan speeds in sysfs
Controls registered as RPM and PWM fans are now displayed
with the "RPM" or "%" suffix respectively to make it
clearer to the user what the value actually means since
the fan type isn't otherwise obvious.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:20 +10:00
Benjamin Herrenschmidt
a94d72b136 powerpc/windfarm: Remove spurrious sysfs_attr_init()
The windfarm core will do it, so this is a duplicate.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:20 +10:00
Benjamin Herrenschmidt
e074d08e2b powerpc/windfarm: const'ify and add "priv" field to controls & sensors
const'ify the sensor ops and name and add a void* for use by
the control and sensor drivers to point back to their private
data, avoiding the need to create a wrapper data structure
per sensor or control instance.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:19 +10:00
Benjamin Herrenschmidt
e326b30fda powerpc/pmac: Convert windfarm_smu_sat to new i2c probing
This simplifies the driver to stop using the deprecated attach interface.

While at it we also implement teardown properly and fix the refcounting
by using a kref.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:19 +10:00
Benjamin Herrenschmidt
22b6d2ea35 powerpc/pmac: Convert windfarm_max6690 to new i2c probing
This simplifies the driver to stop using the deprecated attach interface

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:18 +10:00
Benjamin Herrenschmidt
5400480f54 powerpc/pmac: Convert windfarm_lm75 to new i2c probing
This simplifies the driver to stop using the deprecated attach interface

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:18 +10:00
Benjamin Herrenschmidt
7a4b15cdf3 powerpc/pmac: Convert therm_adt746x to new i2c probing
This simplifies the driver to stop using the deprecated attach interface,

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:18 +10:00
Benjamin Herrenschmidt
81e5d8646f i2c/powermac: Register i2c devices from device-tree
This causes i2c-powermac to register i2c devices exposed in the
device-tree, enabling new-style probing of devices.

Note that we prefix the IDs with "MAC," in order to prevent the
generic drivers from matching. This is done on purpose as we only
want drivers specifically tested/designed to operate on powermacs
to match.

This removes the special case we had for the AMS driver, and updates
the driver's match table instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:17 +10:00
Benjamin Herrenschmidt
76ef6a25ce Merge remote-tracking branch 'geoff/for-powerpc' into next 2012-04-30 14:49:17 +10:00
Ping Cheng
1963518b9b Input: wacom - add 0xE5 (MT device) support
Main part of patch is adding support for a new Wacom MT touch
packet and labels these devices using MTSCREEN type.

Other items of interest:

Delete some duplicate code in HID parsing for Y info since
its already done in X path.

In wacom_query_tablet_data(), only invoke the set report
that requests tablets to send Wacom Touch packets for
Finger interfaces.  Mostly, this is to make code intent clear.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 21:13:53 -07:00
Ping Cheng
f393ee2b81 Input: wacom - retrieve maximum number of touch points
From the HID usage table when it is supported.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 21:13:46 -07:00
Greg Kroah-Hartman
007bab9132 USB: remove CONFIG_USB_DEVICE_CLASS
This option has been deprecated for many years now, and no userspace
tools use it anymore, so it should be safe to finally remove it.

Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:29:57 -04:00
Greg Kroah-Hartman
fb28d58b72 USB: remove CONFIG_USB_DEVICEFS
This option has been deprecated for many years now, and no userspace
tools use it anymore, so it should be safe to finally remove it.

Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:20:03 -04:00
Ben Minerds
70f3c7586c USB: serial: belkin_sa: Changes to conform with coding style
Removed some spaces before tabs and reformatted switch statement.

Signed-off-by: Ben Minerds <puzzleduck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:20:03 -04:00
Arnaud Patard
aaa10eb1d0 8250_pci: fix pch uart matching
The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids
entries, preventing it to match and thus is breaking serial port support for
theses systems.

This has been tested on a nanoETXexpress-TT, which has a specifici uart clock.

Tested-by: Erwan Velu <Erwan.Velu@zodiacaerospace.com>
[stable@: please apply to 3.0-stable, 3.2-stable and 3.3-stable]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:15:29 -04:00
Jiri Slaby
3fa10cc83f TTY: n_tty, do not dereference user buffer
copy_from_read_buf currently copies data to a user buffer and then
checks if the data is single EOF. But it checks it by accessing the
user buffer. First, the buffer may be changed by other threads of the
user program already. Second, it accesses the buffer without any
checks. It might be write-only for example.

Fix this by inspecting contents of the tty (kernel) buffer instead.
Note that "n == 1" is necessary, but not sufficient. But we check
later that there is nothing left by "!tty->read_cnt" condition.

There is still an issue with the current code that EOF being wrapped
to the start of the circular buffer will result in an inappropriate
losing of the EOF character. But this is not intended to be fixed by
this patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Emil Goode <emilgoode@gmail.com>
Cc: Howard Chu <hyc@symas.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:13:54 -04:00
Greg Kroah-Hartman
c0a6720977 Revert "w1: Add 1-wire slave device driver for DS28E04-100"
This reverts commit f19420c1ac.

It contained lots of errors and warnings and shouldn't have ever been
applied, that was my fault, sorry.

Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:12:08 -04:00
Chanwoo Choi
f4cce69611 Extcon: Notify changed state for only one cable to notifee
This patch inform the state of only one cable instead of previous data
including the state of 32 cables to notifee which use
extcon_register_interest()
function to monitor whether the specific cable is attachd or detached.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:03:49 -04:00
Oliver Neukum
2f338c8a19 USB: cdc-wdm: fix memory leak
cleanup() is not called if the last close() comes after
disconnect(). That leads to a memory leak. Rectified
by checking for an earlier disconnect() in release()

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:53:41 -04:00
Oliver Neukum
24a85bae5d USB: cdc-wdm: sanitize error returns
wdm_flush() returns unsanitized USB error codes.
They must be cleaned up to before being anded to user space

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:53:41 -04:00
Ravishankar Karkala Mallikarjunayya
949fd38c7b Staging: comedi: fix line over 80 character issue in ni_at_a2150.c
This is a patch to the ni_at_a2150.c file that fixes up a line
over 80 character warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:47:02 -04:00
Ravishankar Karkala Mallikarjunayya
190908ba6d Staging: comedi: fix line over 80 character issue in cb_pcimdas.c.
This is a patch to the cb_pcimdas.c file that fixes up a line
over 80 character warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:47:02 -04:00
Ravishankar Karkala Mallikarjunayya
ac971c9485 Staging: comedi: fix line over 80 character issue in daqboard2000.c
This is a patch to the daqboard2000.c file that fixes up a
line over 80 character warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:47:02 -04:00
Ravishankar Karkala Mallikarjunayya
3c5510ba50 Staging: comedi: fix line over 80 character issue in cb_pcidda.c
This is a patch to the cb_pcidda.c file that fixes up a line over 80
character warning found by the checkpatch.pl tool

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:47:02 -04:00
Tomas Melin
ed7dcb47f6 Staging: Comedi adv_pci1710 : Corrected over 80 column warnings
Various comments and code lines longer than 80 chars fixed in file adv_pci1710.c.

Signed-off-by: Tomas Melin <tomas.melin@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:44:25 -04:00
H Hartley Sweeten
cb1648b46c staging: comedi: refactor serial2002 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:55 -04:00
H Hartley Sweeten
e9a4a7fb4c staging: comedi: refactor s526 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:54 -04:00
H Hartley Sweeten
cb5f523779 staging: comedi: refactor rti802 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:54 -04:00
H Hartley Sweeten
69d7c49ea3 staging: comedi: refactor rti800 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:54 -04:00
H Hartley Sweeten
6beb8160ea staging: comedi: partial refactor of the rtd520 driver to remove forward declarations
Move the struct comedi_driver MODULE_DEVICE_TABLE to the end
of the source. The attach and detach functions are not moved yet
because patch is pretty messy and not reviewable. This is more
typical of how other drivers are written and removes the need for
the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:54 -04:00
H Hartley Sweeten
9a644c40a3 staging: comedi: refactor poc driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:53 -04:00
H Hartley Sweeten
6b19f9c6be staging: comedi: refactor pcmuio driver to remove forward declarations
Refactor the switch_page and pcmuio_stop_intr functions to avoid
needing the forward declarations.

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:53 -04:00
H Hartley Sweeten
b2bb98e179 staging: comedi: refactor pcmmio driver to remove forward declarations
Refactor the switch_page and pcmmio_stop_intr functions to avoid
needing the forward declarations.

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:53 -04:00
H Hartley Sweeten
924f4685f4 staging: comedi: refactor pcmda12 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:53 -04:00
H Hartley Sweeten
3496cb9fac staging: comedi: refactor pcmad driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 21:42:53 -04:00