[ Upstream commit e5bf5ee266 ]
ffs_epfile_open() can race with removal, ending up with file->private_data
pointing to freed object.
There is a total count of opened files on functionfs (both ep0 and
dynamic ones) and when it hits zero, dynamic files get removed.
Unfortunately, that removal can happen while another thread is
in ffs_epfile_open(), but has not incremented the count yet.
In that case open will succeed, leaving us with UAF on any subsequent
read() or write().
The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.
atomic_add_return() is not a good idea, when object remains visible all
along.
To untangle that
* serialize openers on ffs->mutex (both for ep0 and for dynamic files)
* have dynamic ones use atomic_inc_not_zero() and fail if we had
zero ->opened; in that case the file we are opening is doomed.
* have the inodes of dynamic files marked on removal (from the
callback of simple_recursive_removal()) - clear ->i_private there.
* have open of dynamic ones verify they hadn't been already removed,
along with checking that state is FFS_ACTIVE.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa31ee9ec ]
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b359af8275 ]
generic_file_direct_write() also does this and has a large
comment about.
Reproducer here is xfstest's generic/209, which is exactly to
have competing DIO write and cached IO read.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ce120dcef ]
This was done as condition on direct_io_allow_mmap, but I believe
this is not right, as a file might be open two times - once with
write-back enabled another time with FOPEN_DIRECT_IO.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 957aa59749 ]
If a mailbox command completes immediately after
wait_for_completion_timeout() times out, ha->mbx_intr_comp could be left
in an inconsistent state, causing the next mailbox command not to wait
for the hardware. Fix by reinitializing the completion before use.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/11b6485e-0bfd-4784-8f99-c06a196dad94@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f58fc64d5 ]
When given the module parameter qlini_mode=exclusive, qla2xxx in
initiator mode is initially unable to successfully send SCSI commands to
devices it finds while scanning, resulting in an escalating series of
resets until an adapter reset clears the issue. Fix by checking the
active mode instead of the module parameter.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/1715ec14-ba9a-45dc-9cf2-d41aa6b81b5e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f6aaade2a ]
When qla2xxx is loaded with qlini_mode=disabled,
ha->flags.disable_msix_handshake is used before it is set, resulting in
the wrong interrupt handler being used on certain HBAs
(qla2xxx_msix_rsp_q_hs() is used when qla2xxx_msix_rsp_q() should be
used). The only difference between these two interrupt handlers is that
the _hs() version writes to a register to clear the "RISC" interrupt,
whereas the other version does not. So this bug results in the RISC
interrupt being cleared when it should not be. This occasionally causes
a different interrupt handler qla24xx_msix_default() for a different
vector to see ((stat & HSRX_RISC_INT) == 0) and ignore its interrupt,
which then causes problems like:
qla2xxx [0000:02:00.0]-d04c:6: MBX Command timeout for cmd 20,
iocontrol=8 jiffies=1090c0300 mb[0-3]=[0x4000 0x0 0x40 0xda] mb7 0x500
host_status 0x40000010 hccr 0x3f00
qla2xxx [0000:02:00.0]-101e:6: Mailbox cmd timeout occurred, cmd=0x20,
mb[0]=0x20. Scheduling ISP abort
(the cmd varies; sometimes it is 0x20, 0x22, 0x54, 0x5a, 0x5d, or 0x6a)
This problem can be reproduced with a 16 or 32 Gbps HBA by loading
qla2xxx with qlini_mode=disabled and running a high IOPS test while
triggering frequent RSCN database change events.
While analyzing the problem I discovered that even with
disable_msix_handshake forced to 0, it is not necessary to clear the
RISC interrupt from qla2xxx_msix_rsp_q_hs() (more below). So just
completely remove qla2xxx_msix_rsp_q_hs() and the logic for selecting
it, which also fixes the bug with qlini_mode=disabled.
The test below describes the justification for not needing
qla2xxx_msix_rsp_q_hs():
Force disable_msix_handshake to 0:
qla24xx_config_rings():
if (0 && (ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
(ha->flags.msix_enabled)) {
In qla24xx_msix_rsp_q() and qla2xxx_msix_rsp_q_hs(), check:
(rd_reg_dword(®->host_status) & HSRX_RISC_INT)
Count the number of calls to each function with HSRX_RISC_INT set and
the number with HSRX_RISC_INT not set while performing some I/O.
If qla2xxx_msix_rsp_q_hs() clears the RISC interrupt (original code):
qla24xx_msix_rsp_q: 50% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 5% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
If qla2xxx_msix_rsp_q_hs() does not clear the RISC interrupt (patched
code):
qla24xx_msix_rsp_q: 100% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 9% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
In the case of the original code, qla24xx_msix_rsp_q() was seeing
HSRX_RISC_INT set only 50% of the time because qla2xxx_msix_rsp_q_hs()
was clearing it when it shouldn't have been. In the patched code,
qla24xx_msix_rsp_q() sees HSRX_RISC_INT set 100% of the time, which
makes sense if that interrupt handler needs to clear the RISC interrupt
(which it does). qla2xxx_msix_rsp_q_hs() sees HSRX_RISC_INT only 9% of
the time, which is just overlap from the other interrupt during the
high IOPS test.
Tested with SCST on:
QLE2742 FW:v9.08.02 (32 Gbps 2-port)
QLE2694L FW:v9.10.11 (16 Gbps 4-port)
QLE2694L FW:v9.08.02 (16 Gbps 4-port)
QLE2672 FW:v8.07.12 (16 Gbps 2-port)
both initiator and target mode
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/56d378eb-14ad-49c7-bae9-c649b6c7691e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 825ce89a3e ]
The PUT_64[LB]E() macros need to cast the value to unsigned long long
like the GET_64[LB]E() macros. Caused lots of warnings when compiled
on 32-bit, and clobbered addresses (36-bit P4080).
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-mustard-wrasse-694572@boujee-and-buff
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0e6bc0c3e ]
CP110 based platforms rely on the bootloader for pci port
initialization.
TF-A actively prevents non-uboot re-configuration of pci lanes, and many
boards do not have software control over the pci card reset.
If a pci port had link at boot-time and the clock is stopped at a later
point, the link fails and can not be recovered.
PCI controller driver probe - and by extension ownership of a driver for
the pci clocks - may be delayed especially on large modular kernels,
causing the clock core to start disabling unused clocks.
Add the CLK_IGNORE_UNUSED flag to the three pci port's clocks to ensure
they are not stopped before the pci controller driver has taken
ownership and tested for an existing link.
This fixes failed pci link detection when controller driver probes late,
e.g. with arm64 defconfig and CONFIG_PHY_MVEBU_CP110_COMPHY=m.
Closes: https://lore.kernel.org/r/b71596c7-461b-44b6-89ab-3cfbd492639f@solid-run.com
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07caedc6a3 ]
It's possible for an unstable link to repeatedly bounce allowing a FLOGI
retry, but then bounce again forcing an abort of the FLOGI. Ensure that
the initial reference count on the FLOGI ndlp is restored in this faulty
link scenario.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48e6b7e708 ]
Add support for new Hurray Data controller.
All entries are in HEX.
Add PCI IDs for Hurray Data controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 207d 4840
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f61783920 ]
am33xx.dtsi has the same clock setup as am35xx.dtsi, setting
ti,no-reset-on-init and ti,no-idle on timer1_target and timer2_target,
so AM33 needs the same workaround as AM35 to avoid ti-sysc probe
failing on certain target modules.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250825131114.2206804-1-alexander.stein@ew.tq-group.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b5d441696 ]
This is currently done in uml_finishsetup(), but e.g. with
KCOV enabled we'll crash because some init code can call
into e.g. memparse(), which has coverage annotations, and
then the checks in check_kcov_mode() crash because current
is NULL.
Simply initialize the cpu_tasks[] array statically, which
fixes the crash. For the later SMP work, it seems to have
not really caused any problems yet, but initialize all of
the entries anyway.
Link: https://patch.msgid.link/20250924113214.c76cd74d0583.I974f691ebb1a2b47915bd2b04cc38e5263b9447f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81fb53feb6 ]
With mailbox channel requested, there is possibility that interrupts may
come in, so need to make sure the workqueue is initialized before
the queue is scheduled by mailbox rx callback.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 014de20bb3 ]
Address a race condition between shutdown and suspend operations in the
UFS Mediatek driver. Before entering suspend, check if a shutdown is in
progress to prevent conflicts and ensure system stability.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bd30d8fc5 ]
channel_handler() sets intf->channels_ready to true but never
clears it, so __scan_channels() skips any rescan. When the BMC
firmware changes a rescan is required. Allow it by clearing
the flag before starting a new scan.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Message-ID: <20250930074239.2353-3-guojinhui.liam@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 936750fdba ]
The race window between __scan_channels() and deliver_response() causes
the parameters of some channels to be set to 0.
1.[CPUA] __scan_channels() issues an IPMI request and waits with
wait_event() until all channels have been scanned.
wait_event() internally calls might_sleep(), which might
yield the CPU. (Moreover, an interrupt can preempt
wait_event() and force the task to yield the CPU.)
2.[CPUB] deliver_response() is invoked when the CPU receives the
IPMI response. After processing a IPMI response,
deliver_response() directly assigns intf->wchannels to
intf->channel_list and sets intf->channels_ready to true.
However, not all channels are actually ready for use.
3.[CPUA] Since intf->channels_ready is already true, wait_event()
never enters __wait_event(). __scan_channels() immediately
clears intf->null_user_handler and exits.
4.[CPUB] Once intf->null_user_handler is set to NULL, deliver_response()
ignores further IPMI responses, leaving the remaining
channels zero-initialized and unusable.
CPUA CPUB
------------------------------- -----------------------------
__scan_channels()
intf->null_user_handler
= channel_handler;
send_channel_info_cmd(intf,
0);
wait_event(intf->waitq,
intf->channels_ready);
do {
might_sleep();
deliver_response()
channel_handler()
intf->channel_list =
intf->wchannels + set;
intf->channels_ready = true;
send_channel_info_cmd(intf,
intf->curr_channel);
if (condition)
break;
__wait_event(wq_head,
condition);
} while(0)
intf->null_user_handler
= NULL;
deliver_response()
if (!msg->user)
if (intf->null_user_handler)
rv = -EINVAL;
return rv;
------------------------------- -----------------------------
Fix the race between __scan_channels() and deliver_response() by
deferring both the assignment intf->channel_list = intf->wchannels
and the flag intf->channels_ready = true until all channels have
been successfully scanned or until the IPMI request has failed.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Message-ID: <20250930074239.2353-2-guojinhui.liam@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 095d621141 ]
SX controls are currently broken, since the clamp introduced in
commit a0ce874cfa ("ASoC: ops: improve snd_soc_get_volsw") does not
handle SX controls, for example where the min value in the clamp is
greater than the max value in the clamp.
Add clamp parameter to prevent clamping in SX controls.
The nature of SX controls mean that it wraps around 0, with a variable
number of bits, therefore clamping the value becomes complicated and
prone to error.
Fixes 35 kunit tests for soc_ops_test_access.
Fixes: a0ce874cfa ("ASoC: ops: improve snd_soc_get_volsw")
Co-developed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251216134938.788625-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b0f3f9ee4 ]
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 095d621141 ("ASoC: ops: fix snd_soc_get_volsw for sx controls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df8d829bba ]
When nfsd_create_serv() calls percpu_ref_init() to initialize
nn->nfsd_net_ref, it allocates both a percpu reference counter
and a percpu_ref_data structure (64 bytes). However, if the
function fails later due to svc_create_pooled() returning NULL
or svc_bind() returning an error, these allocations are not
cleaned up, resulting in a memory leak.
The leak manifests as:
- Unreferenced percpu allocation (8 bytes per CPU)
- Unreferenced percpu_ref_data structure (64 bytes)
Fix this by adding percpu_ref_exit() calls in both error paths
to properly clean up the percpu_ref_init() allocations.
This patch fixes the percpu_ref leak in nfsd_create_serv() seen
as an auxiliary leak in syzbot report 099461f8558eb0a1f4f3; the
prepare_creds() and vsock-related leaks in the same report
remain to be addressed separately.
Reported-by: syzbot+099461f8558eb0a1f4f3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=099461f8558eb0a1f4f3
Fixes: 47e988147f ("nfsd: add nfsd_serv_try_get and nfsd_serv_put")
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b960a83c ]
The reset_control handler has the reference count for usage, as there is
reset operation in runtime suspend and resume, then reset operation in
probe() would cause the reference count of reset not balanced.
Previously add reset operation in probe and remove is to fix the compile
issue with !CONFIG_PM, as the driver has been update to use
RUNTIME_PM_OPS(), so that change can be reverted.
Fixes: 1e0dff741b ("ASoC: ak4458: remove "reset-gpios" property handler")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251216070201.358477-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5526c1c6ba ]
get_meter_levels_from_urb() parses the 64-byte meter packets sent by
the device and fills the per-channel arrays meter_level[],
comp_level[] and master_level[] in struct snd_us16x08_meter_store.
Currently the function derives the channel index directly from the
meter packet (MUB2(meter_urb, s) - 1) and uses it to index those
arrays without validating the range. If the packet contains a
negative or out-of-range channel number, the driver may write past
the end of these arrays.
Introduce a local channel variable and validate it before updating the
arrays. We reject negative indices, limit meter_level[] and
comp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[]
updates with ARRAY_SIZE(master_level).
Fixes: d2bb390a20 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Reported-by: DARKNAVY (@DarkNavyOrg) <vr@darknavy.com>
Closes: https://lore.kernel.org/tencent_21C112743C44C1A2517FF219@qq.com
Signed-off-by: Shipei Qu <qu@darknavy.com>
Link: https://patch.msgid.link/20251217024630.59576-1-qu@darknavy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5032347c04 ]
When pdacf_config() fails, snd_pdacf_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the card
list entry when pdacf_config() fails.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215090433.211-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a03b40dea ]
When vxpocket_config() fails, vxpocket_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the
allocation bit when vxpocket_config() fails.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215042652.695-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f4d0899ef ]
If SAI works in master mode it will generate clocks for external codec
from audio PLLs. Thus sample rates should be constrained according to
audio PLL clocks. While SAI works in slave mode which means clocks are
generated externally then constraints are independent of audio PLLs.
Fixes: 4edc98598b ("ASoC: fsl_sai: Add sample rate constraint")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20251210062109.2577735-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b62e64e6d ]
When the TLB_REMOTE_WRONG_CPU enum was introduced for the tlb_flush
tracepoint, the enum was not exported to user-space. Add it to the
appropriate macro definition to enable parsing by userspace tools, as
per:
Link: https://lore.kernel.org/all/20150403013802.220157513@goodmis.org
[ mingo: Capitalize IPI, etc. ]
Fixes: 2815a56e4b ("x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Link: https://patch.msgid.link/20251212-tlb-trace-fix-v2-1-d322e0ad9b69@columbia.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8161e5304 ]
Zero can be a valid value of num_records. For example, on Intel Atom x6425RE,
only x87 and SSE are supported (features 0, 1), and fpu_user_cfg.max_features
is 3. The for_each_extended_xfeature() loop only iterates feature 2, which is
not enabled, so num_records = 0. This is valid and should not cause core dump
failure.
The issue is that dump_xsave_layout_desc() returns 0 for both genuine errors
(dump_emit() failure) and valid cases (no extended features). Use negative
return values for errors and only abort on genuine failures.
Fixes: ba386777a3 ("x86/elf: Add a new FPU buffer layout info to x86 core files")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251210000219.4094353-2-yongxin.liu@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0edc78b82b upstream.
Luigi reported that retriggering a posted MSI interrupt does not work
correctly.
The reason is that the retrigger happens at the vector domain by sending an
IPI to the actual vector on the target CPU. That works correctly exactly
once because the posted MSI interrupt chip does not issue an EOI as that's
only required for the posted MSI notification vector itself.
As a consequence the vector becomes stale in the ISR, which not only
affects this vector but also any lower priority vector in the affected
APIC because the ISR bit is not cleared.
Luigi proposed to set the vector in the remap PIR bitmap and raise the
posted MSI notification vector. That works, but that still does not cure a
related problem:
If there is ever a stray interrupt on such a vector, then the related
APIC ISR bit becomes stale due to the lack of EOI as described above.
Unlikely to happen, but if it happens it's not debuggable at all.
So instead of playing games with the PIR, this can be actually solved
for both cases by:
1) Keeping track of the posted interrupt vector handler state
2) Implementing a posted MSI specific irq_ack() callback which checks that
state. If the posted vector handler is inactive it issues an EOI,
otherwise it delegates that to the posted handler.
This is correct versus affinity changes and concurrent events on the posted
vector as the actual handler invocation is serialized through the interrupt
descriptor lock.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Reported-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Luigi Rizzo <lrizzo@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251125214631.044440658@linutronix.de
Closes: https://lore.kernel.org/lkml/20251124104836.3685533-1-lrizzo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c56a12c71a upstream.
For some mysterious reasons the GCC 8 and 9 preprocessor manages to
sporadically fumble _ASM_BYTES(0x0f, 0x0b):
$ grep ".byte[ ]*0x0f" defconfig-build/drivers/net/wireless/realtek/rtlwifi/base.s
1: .byte0x0f,0x0b ;
1: .byte 0x0f,0x0b ;
which makes the assembler upset and all that. While there are more
_ASM_BYTES() users (notably the NOP instructions), those don't seem
affected. Therefore replace the offending ASM_UD2 with one using the
ud2 mnemonic.
Reported-by: Jean Delvare <jdelvare@suse.de>
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Fixes: 85a2d4a890 ("x86,ibt: Use UDB instead of 0xEA")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251218104659.GT3911114@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed724ea1b8 upstream.
Enable use of common SDHCI-related properties such as sdhci-caps-mask as
found in the AST2600 EVB DTS.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9c4c9085e upstream.
On Xilinx/AMD platforms, the CD stable bit take slightly longer than
one second(about an additional 100ms) to assert after a host
controller reset. Although no functional failure observed with the
existing one second delay but to ensure reliable initialization, increase
the CD stable timeout to 2 seconds.
Fixes: e251709aad ("mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3ecb12e2e upstream.
MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on
ARCH_S32, which results in unmet dependencies when compiling strictly
for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to
ARCH_MXC in the driver's dependencies.
Fixes: 5c4f00627c ("mmc: sdhci-esdhc-imx: add NXP S32G2 support")
Cc: stable@bvger.kernel.org
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1417927df8 upstream.
Commit fc96ec826b ("spi: fsl-cpm: Use 16 bit mode for large transfers
with even size") failed to make sure that the size is really even
before switching to 16 bit mode. Until recently the problem went
unnoticed because kernfs uses a pre-allocated bounce buffer of size
PAGE_SIZE for reading EEPROM.
But commit 8ad6249c51 ("eeprom: at25: convert to spi-mem API")
introduced an additional dynamically allocated bounce buffer whose size
is exactly the size of the transfer, leading to a buffer overrun in
the fsl-cpm driver when that size is odd.
Add the missing length parity verification and remain in 8 bit mode
when the length is not even.
Fixes: fc96ec826b ("spi: fsl-cpm: Use 16 bit mode for large transfers with even size")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/638496dd-ec60-4e53-bad7-eb657f67d580@csgroup.eu/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Sverdlin Alexander <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/3c4d81c3923c93f95ec56702a454744a4bad3cfc.1763627618.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ea3a44cef upstream.
The current implementation overlooks the 'guaranteed_perf'
register in this check.
If the Guaranteed Performance register is located in the PCC
subspace, the function currently attempts to read it without
acquiring the lock and without sending the CMD_READ doorbell
to the firmware. This can result in reading stale data.
Fixes: 29523f0953 ("ACPI / CPPC: Add support for guaranteed performance")
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251210132227.1988380-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f103fa127c upstream.
Local variable 'ret' in acpi_pcc_address_space_setup() is currently
declared as 'static'. This can lead to race conditions in a
multithreaded environment.
Remove the 'static' qualifier to ensure that 'ret' will be allocated
directly on the stack as a local variable.
Fixes: a10b1c99e2 ("ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available")
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: lihuisong@huawei.com
Cc: 6.2+ <stable@vger.kernel.org> # 6.2+
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251210132634.2050033-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c87f820bc4 upstream.
On Tegra platforms using ACPI, the SMCCC driver already registers the
SoC device. This makes the registration performed by the Tegra fuse
driver redundant.
When booted via ACPI, skip registering the SoC device and suppress
printing SKU information from the Tegra fuse driver, as this information
is already provided by the SMCCC driver.
Fixes: 972167c690 ("soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e54d3b4a8 upstream.
Commit 2603be9e81 ("can: gs_usb: gs_can_open(): improve error handling")
added missing error handling to the gs_can_open() function.
The driver uses 2 USB anchors to track the allocated URBs: the TX URBs in
struct gs_can::tx_submitted for each netdev and the RX URBs in struct
gs_usb::rx_submitted for the USB device. gs_can_open() allocates the RX
URBs, while TX URBs are allocated during gs_can_start_xmit().
The cleanup in gs_can_open() kills all anchored dev->tx_submitted
URBs (which is not necessary since the netdev is not yet registered), but
misses the parent->rx_submitted URBs.
Fix the problem by killing the rx_submitted instead of the tx_submitted.
Fixes: 2603be9e81 ("can: gs_usb: gs_can_open(): improve error handling")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251210-gs_usb-fix-error-handling-v1-1-d6a5a03f10bb@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204c8f77e8 upstream.
xfs_qm_quotacheck_dqadjust acquired the dquot through xfs_qm_dqget,
which means it owns a reference and holds q_qlock. Both need to
be dropped on an error exit.
Cc: <stable@vger.kernel.org> # v6.13
Fixes: ca378189fd ("xfs: convert quotacheck to attach dquot buffers")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aed3716db7 upstream.
The device occasionally wakes up from suspend with missing input on the
internal keyboard and the following suspend attempt results in an instant
wake-up. The quirks fix both issues for this device.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251124203336.64072-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf40644ef8 upstream.
The dev3_register_work delayed work item is initialized within
alps_reconnect() and scheduled upon receipt of the first bare
PS/2 packet from an external PS/2 device connected to the ALPS
touchpad. During device detachment, the original implementation
calls flush_workqueue() in psmouse_disconnect() to ensure
completion of dev3_register_work. However, the flush_workqueue()
in psmouse_disconnect() only blocks and waits for work items that
were already queued to the workqueue prior to its invocation. Any
work items submitted after flush_workqueue() is called are not
included in the set of tasks that the flush operation awaits.
This means that after flush_workqueue() has finished executing,
the dev3_register_work could still be scheduled. Although the
psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),
the scheduling of dev3_register_work remains unaffected.
The race condition can occur as follows:
CPU 0 (cleanup path) | CPU 1 (delayed work)
psmouse_disconnect() |
psmouse_set_state() |
flush_workqueue() | alps_report_bare_ps2_packet()
alps_disconnect() | psmouse_queue_work()
kfree(priv); // FREE | alps_register_bare_ps2_mouse()
| priv = container_of(work...); // USE
| priv->dev3 // USE
Add disable_delayed_work_sync() in alps_disconnect() to ensure
that dev3_register_work is properly canceled and prevented from
executing after the alps_data structure has been deallocated.
This bug is identified by static analysis.
Fixes: 04aae283ba ("Input: ALPS - do not mix trackstick and external PS/2 mouse data")
Cc: stable@kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/b57b0a9ccca51a3f06be141bfc02b9ffe69d1845.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e58c88f0cb upstream.
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open().
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212052314.16139-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 248d3a73a0 upstream.
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d579478cee upstream.
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a2 ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7953794f74 upstream.
HID_GD_Z is mapped to ABS_Z for stylus and pen in hid-input.c. But HID_GD_Z
should be used to report ABS_DISTANCE for stylus and pen as described at:
Documentation/input/event-codes.rst#n226
* ABS_DISTANCE:
- Used to describe the distance of a tool from an interaction surface. This
event should only be emitted while the tool is hovering, meaning in close
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
- BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
proximity and set to 0 when the tool leaves detectable proximity.
BTN_TOOL_<name> signals the type of tool that is currently detected by the
hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
This patch makes the correct mapping. The ABS_DISTANCE is currently not mapped
by any HID usage in hid-generic driver.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d7a890e4 upstream.
The smb2_set_ea function, which handles Extended Attributes (EA),
was performing buffer validation checks that incorrectly omitted the size
of the null terminating character (+1 byte) for EA Name.
This patch fixes the issue by explicitly adding '+ 1' to EaNameLength where
the null terminator is expected to be present in the buffer, ensuring
the validation accurately reflects the total required buffer size.
Cc: stable@vger.kernel.org
Reported-by: Roger <roger.andersen@protonmail.com>
Reported-by: Stanislas Polu <spolu@dust.tt>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cafb57f7bd upstream.
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session.
Cc: stable@vger.kernel.org
Reported-by: Alexandre <roger.andersen@protonmail.com>
Reported-by: Stanislas Polu <spolu@dust.tt>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d510ac316 upstream.
When size equals the current i_size (including 0), the code used to call
check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1`
and can underflow for size==0. Skip the equal case.
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
