mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-16 22:39:48 +00:00
1,011,995 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sean Christopherson
|
b6194b94a2 |
KVM: VMX: Configure list of user return MSRs at module init
Configure the list of user return MSRs that are actually supported at module init instead of reprobing the list of possible MSRs every time a vCPU is created. Curating the list on a per-vCPU basis is pointless; KVM is completely hosed if the set of supported MSRs changes after module init, or if the set of MSRs differs per physical PCU. The per-vCPU lists also increase complexity (see __vmx_find_uret_msr()) and creates corner cases that _should_ be impossible, but theoretically exist in KVM, e.g. advertising RDTSCP to userspace without actually being able to virtualize RDTSCP if probing MSR_TSC_AUX fails. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210504171734.1434054-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
36fa06f9ff |
KVM: x86: Add support for RDPID without RDTSCP
Allow userspace to enable RDPID for a guest without also enabling RDTSCP.
Aside from checking for RDPID support in the obvious flows, VMX also needs
to set ENABLE_RDTSCP=1 when RDPID is exposed.
For the record, there is no known scenario where enabling RDPID without
RDTSCP is desirable. But, both AMD and Intel architectures allow for the
condition, i.e. this is purely to make KVM more architecturally accurate.
Fixes:
|
||
|
Sean Christopherson
|
0caa0a77c2 |
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
Probe MSR_TSC_AUX whether or not RDTSCP is supported in the host, and if probing succeeds, load the guest's MSR_TSC_AUX into hardware prior to VMRUN. Because SVM doesn't support interception of RDPID, RDPID cannot be disallowed in the guest (without resorting to binary translation). Leaving the host's MSR_TSC_AUX in hardware would leak the host's value to the guest if RDTSCP is not supported. Note, there is also a kernel bug that prevents leaking the host's value. The host kernel initializes MSR_TSC_AUX if and only if RDTSCP is supported, even though the vDSO usage consumes MSR_TSC_AUX via RDPID. I.e. if RDTSCP is not supported, there is no host value to leak. But, if/when the host kernel bug is fixed, KVM would start leaking MSR_TSC_AUX in the case where hardware supports RDPID but RDTSCP is unavailable for whatever reason. Probing MSR_TSC_AUX will also allow consolidating the probe and define logic in common x86, and will make it simpler to condition the existence of MSR_TSX_AUX (from the guest's perspective) on RDTSCP *or* RDPID. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210504171734.1434054-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
5104d7ffcf |
KVM: VMX: Disable preemption when probing user return MSRs
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit.
Fixes:
|
||
|
Sean Christopherson
|
2183de4161 |
KVM: x86: Move RDPID emulation intercept to its own enum
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes:
|
||
|
Sean Christopherson
|
3b195ac926 |
KVM: SVM: Inject #UD on RDTSCP when it should be disabled in the guest
Intercept RDTSCP to inject #UD if RDTSC is disabled in the guest.
Note, SVM does not support intercepting RDPID. Unlike VMX's
ENABLE_RDTSCP control, RDTSCP interception does not apply to RDPID. This
is a benign virtualization hole as the host kernel (incorrectly) sets
MSR_TSC_AUX if RDTSCP is supported, and KVM loads the guest's MSR_TSC_AUX
into hardware if RDTSCP is supported in the host, i.e. KVM will not leak
the host's MSR_TSC_AUX to the guest.
But, when the kernel bug is fixed, KVM will start leaking the host's
MSR_TSC_AUX if RDPID is supported in hardware, but RDTSCP isn't available
for whatever reason. This leak will be remedied in a future commit.
Fixes:
|
||
|
Sean Christopherson
|
85d0011264 |
KVM: x86: Emulate RDPID only if RDTSCP is supported
Do not advertise emulation support for RDPID if RDTSCP is unsupported.
RDPID emulation subtly relies on MSR_TSC_AUX to exist in hardware, as
both vmx_get_msr() and svm_get_msr() will return an error if the MSR is
unsupported, i.e. ctxt->ops->get_msr() will fail and the emulator will
inject a #UD.
Note, RDPID emulation also relies on RDTSCP being enabled in the guest,
but this is a KVM bug and will eventually be fixed.
Fixes:
|
||
|
Sean Christopherson
|
8aec21c04c |
KVM: VMX: Do not advertise RDPID if ENABLE_RDTSCP control is unsupported
Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported. Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.
Fixes:
|
||
Maxim Levitsky
|
809c79137a |
KVM: nSVM: remove a warning about vmcb01 VM exit reason
While in most cases, when returning to use the VMCB01,
the exit reason stored in it will be SVM_EXIT_VMRUN,
on first VM exit after a nested migration this field
can contain anything since the VM entry did happen
before the migration.
Remove this warning to avoid the false positive.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210504143936.1644378-3-mlevitsk@redhat.com>
Fixes:
|
||
|
Maxim Levitsky
|
063ab16c14 |
KVM: nSVM: always restore the L1's GIF on migration
While usually the L1's GIF is set while L2 runs, and usually migration nested state is loaded after a vCPU reset which also sets L1's GIF to true, this is not guaranteed. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210504143936.1644378-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Siddharth Chandrasekaran
|
aca352886e |
KVM: x86: Hoist input checks in kvm_add_msr_filter()
In ioctl KVM_X86_SET_MSR_FILTER, input from user space is validated after a memdup_user(). For invalid inputs we'd memdup and then call kfree unnecessarily. Hoist input validation to avoid kfree altogether. Signed-off-by: Siddharth Chandrasekaran <sidcha@amazon.de> Message-Id: <20210503122111.13775-1-sidcha@amazon.de> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Bill Wendling
|
5f443e424e |
selftests: kvm: remove reassignment of non-absolute variables
Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Cc: Jian Cai <caij2003@gmail.com> Signed-off-by: Bill Wendling <morbo@google.com> References: https://lore.kernel.org/lkml/20200714233024.1789985-1-caij2003@gmail.com/ Message-Id: <20201211012317.3722214-1-morbo@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Vitaly Kuznetsov
|
70f094f4f0 |
KVM: nVMX: Properly pad 'struct kvm_vmx_nested_state_hdr'
Eliminate the probably unwanted hole in 'struct kvm_vmx_nested_state_hdr':
Pre-patch:
struct kvm_vmx_nested_state_hdr {
__u64 vmxon_pa; /* 0 8 */
__u64 vmcs12_pa; /* 8 8 */
struct {
__u16 flags; /* 16 2 */
} smm; /* 16 2 */
/* XXX 2 bytes hole, try to pack */
__u32 flags; /* 20 4 */
__u64 preemption_timer_deadline; /* 24 8 */
};
Post-patch:
struct kvm_vmx_nested_state_hdr {
__u64 vmxon_pa; /* 0 8 */
__u64 vmcs12_pa; /* 8 8 */
struct {
__u16 flags; /* 16 2 */
} smm; /* 16 2 */
__u16 pad; /* 18 2 */
__u32 flags; /* 20 4 */
__u64 preemption_timer_deadline; /* 24 8 */
};
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210503150854.1144255-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Vitaly Kuznetsov
|
c9ecafaf01 |
KVM: selftests: evmcs_test: Check that VMCS12 is alway properly synced to eVMCS after restore
Add a test for the regression, introduced by commit
|
||
|
Vitaly Kuznetsov
|
32d1b3ab58 |
KVM: selftests: evmcs_test: Check that VMLAUNCH with bogus EVMPTR is causing #UD
'run->exit_reason == KVM_EXIT_SHUTDOWN' check is not ideal as we may be getting some unexpected exception. Directly check for #UD instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210505151823.1341678-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
f5c7e8425f |
KVM: nVMX: Always make an attempt to map eVMCS after migration
When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit |
||
|
Siddharth Chandrasekaran
|
46a63924b0 |
doc/kvm: Fix wrong entry for KVM_CAP_X86_MSR_FILTER
The capability that exposes new ioctl KVM_X86_SET_MSR_FILTER to
userspace is specified incorrectly as the ioctl itself (instead of
KVM_CAP_X86_MSR_FILTER). This patch fixes it.
Fixes:
|
||
|
Vitaly Kuznetsov
|
384fc672f5 |
x86/kvm: Unify kvm_pv_guest_cpu_reboot() with kvm_guest_cpu_offline()
Simplify the code by making PV features shutdown happen in one place. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
3d6b84132d |
x86/kvm: Disable all PV features on crash
Crash shutdown handler only disables kvmclock and steal time, other PV features remain active so we risk corrupting memory or getting some side-effects in kdump kernel. Move crash handler to kvm.c and unify with CPU offline. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
c02027b574 |
x86/kvm: Disable kvmclock on all CPUs on shutdown
Currenly, we disable kvmclock from machine_shutdown() hook and this only happens for boot CPU. We need to disable it for all CPUs to guard against memory corruption e.g. on restore from hibernate. Note, writing '0' to kvmclock MSR doesn't clear memory location, it just prevents hypervisor from updating the location so for the short while after write and while CPU is still alive, the clock remains usable and correct so we don't need to switch to some other clocksource. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
8b79feffec |
x86/kvm: Teardown PV features on boot CPU as well
Various PV features (Async PF, PV EOI, steal time) work through memory shared with hypervisor and when we restore from hibernation we must properly teardown all these features to make sure hypervisor doesn't write to stale locations after we jump to the previously hibernated kernel (which can try to place anything there). For secondary CPUs the job is already done by kvm_cpu_down_prepare(), register syscore ops to do the same for boot CPU. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
0a269a008f |
x86/kvm: Fix pr_info() for async PF setup/teardown
'pr_fmt' already has 'kvm-guest: ' so 'KVM' prefix is redundant. "Unregister pv shared memory" is very ambiguous, it's hard to say which particular PV feature it relates to. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Colin Ian King
|
8899a5fc7d |
KVM: x86: Fix potential fput on a null source_kvm_file
The fget can potentially return null, so the fput on the error return
path can cause a null pointer dereference. Fix this by checking for
a null source_kvm_file before doing a fput.
Addresses-Coverity: ("Dereference null return")
Fixes:
|
||
Kai Huang
|
7f6231a391 |
KVM: x86/mmu: Fix kdoc of __handle_changed_spte
The function name of kdoc of __handle_changed_spte() should be itself, rather than handle_changed_spte(). Fix the typo. Signed-off-by: Kai Huang <kai.huang@intel.com> Message-Id: <20210503042446.154695-1-kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Maxim Levitsky
|
9d290e1643 |
KVM: nSVM: leave the guest mode prior to loading a nested state
This allows the KVM to load the nested state more than once without warnings. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210503125446.1353307-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Maxim Levitsky
|
c74ad08f33 |
KVM: nSVM: fix few bugs in the vmcb02 caching logic
* Define and use an invalid GPA (all ones) for init value of last
and current nested vmcb physical addresses.
* Reset the current vmcb12 gpa to the invalid value when leaving
the nested mode, similar to what is done on nested vmexit.
* Reset the last seen vmcb12 address when disabling the nested SVM,
as it relies on vmcb02 fields which are freed at that point.
Fixes:
|
||
|
Maxim Levitsky
|
deee59bacb |
KVM: nSVM: fix a typo in svm_leave_nested
When forcibly leaving the nested mode, we should switch to vmcb01
Fixes:
|
||
Benjamin Segall
|
262de4102c |
kvm: exit halt polling on need_resched() as well
single_task_running() is usually more general than need_resched() but CFS_BANDWIDTH throttling will use resched_task() when there is just one task to get the task to block. This was causing long-need_resched warnings and was likely allowing VMs to overrun their quota when halt polling. Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org> Message-Id: <20210429162233.116849-1-venkateshs@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> |
||
Wanpeng Li
|
d981dd1549 |
KVM: LAPIC: Accurately guarantee busy wait for timer to expire when using hv_timer
Commit |
||
Shahin, Md Shahadat Hossain
|
1699f65c8b |
kvm/x86: Fix 'lpages' kvm stat for TDM MMU
Large pages not being created properly may result in increased memory access time. The 'lpages' kvm stat used to keep track of the current number of large pages in the system, but with TDP MMU enabled the stat is not showing the correct number. This patch extends the lpages counter to cover the TDP case. Signed-off-by: Md Shahadat Hossain Shahin <shahinmd@amazon.de> Cc: Bartosz Szczepanek <bsz@amazon.de> Message-Id: <1619783551459.35424@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Kai Huang
|
ff76d50603 |
KVM: x86/mmu: Avoid unnecessary page table allocation in kvm_tdp_mmu_map()
In kvm_tdp_mmu_map(), while iterating TDP MMU page table entries, it is possible SPTE has already been frozen by another thread but the frozen is not done yet, for instance, when another thread is still in middle of zapping large page. In this case, the !is_shadow_present_pte() check for old SPTE in tdp_mmu_for_each_pte() may hit true, and in this case allocating new page table is unnecessary since tdp_mmu_set_spte_atomic() later will return false and page table will need to be freed. Add is_removed_spte() check before allocating new page table to avoid this. Signed-off-by: Kai Huang <kai.huang@intel.com> Message-Id: <20210429041226.50279-1-kai.huang@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Linus Torvalds
|
9ccce092fc |
orangefs: implement orangefs_readahead
mm/readahead.c/read_pages was quite a bit different back
when I put my open-coded readahead logic into orangefs_readpage.
It seemed to work as designed then, it is a trainwreck now.
This patch implements orangefs_readahead using new xarray
and readahead_expand features that have just been pulled and
removes all my open-coded readahead logic.
This patch results in an extreme read performance improvement,
these sample numbers are from my test VM:
Here's an example of what's upstream in
5.11.8-200.fc33.x86_64:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 5.77943 s, 21.8 MB/s
And here's this version of orangefs_readahead on top of
5.12.0-rc4:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 0.325919 s, 386 MB/s
There are four xfstest regressions with this patch. David Howells
and Matthew Wilcox have been helping me work with this code. One
of the regressions has gone away with the most recent version of
their code that I'm using. I hope this patch can be
pulled even though there are still a few regressions, and that
we can try to get them resolved during the RC period.
-----BEGIN PGP SIGNATURE-----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=09Vm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.13-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"orangefs: implement orangefs_readahead
mm/readahead.c/read_pages was quite a bit different back when I put my
open-coded readahead logic into orangefs_readpage. That logic seemed
to work as designed back then, it is a trainwreck now.
This implements orangefs_readahead using the new xarray and
readahead_expand features and removes all my open-coded readahead
logic.
This results in an extreme read performance improvement, these sample
numbers are from my test VM:
Here's an example of what's upstream in
5.11.8-200.fc33.x86_64:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 5.77943 s, 21.8 MB/s
And here's this version of orangefs_readahead on top of 5.12.0-rc4:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 0.325919 s, 386 MB/s
There are four xfstest regressions with this patch. David Howells and
Matthew Wilcox have been helping me work with this code"
* tag 'for-linus-5.13-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: leave files in the page cache for a few micro seconds at least
Orangef: implement orangefs_readahead.
|
||
|
Linus Torvalds
|
27787ba3fa |
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro: "Assorted stuff all over the place" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: useful constants: struct qstr for ".." hostfs_open(): don't open-code file_dentry() whack-a-mole: kill strlen_user() (again) autofs: should_expire() argument is guaranteed to be positive apparmor:match_mn() - constify devpath argument buffer: a small optimization in grow_buffers get rid of autofs_getpath() constify dentry argument of dentry_path()/dentry_path_raw() |
||
|
Linus Torvalds
|
b28866f4bb |
Merge branch 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull exryptfs updates from Al Viro: "The interesting part here is (ecryptfs) lock_parent() fixes - its treatment of ->d_parent had been very wrong. The rest is trivial cleanups" * 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ecryptfs: ecryptfs_dentry_info->crypt_stat is never used ecryptfs: get rid of unused accessors ecryptfs: saner API for lock_parent() ecryptfs: get rid of pointless dget/dput in ->symlink() and ->link() |
||
|
Linus Torvalds
|
17ae69aba8 |
Add Landlock, a new LSM from Mickaël Salaün <mic@linux.microsoft.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEgycj0O+d1G2aycA8rZhLv9lQBTwFAmCInP4ACgkQrZhLv9lQ
BTza0g//dTeb9woC9H7qlEhK4l9yk62lTss60Q8X7m7ZSNfdL4tiEbi64SgK+iOW
OOegbrOEb8Kzh4KJJYmVlVZ5YUWyH4szgmee1wnylBdsWiWaPLPF3Cflz77apy6T
TiiBsJd7rRE29FKheaMt34B41BMh8QHESN+DzjzJWsFoi/uNxjgSs2W16XuSupKu
bpRmB1pYNXMlrkzz7taL05jndZYE5arVriqlxgAsuLOFOp/ER7zecrjImdCM/4kL
W6ej0R1fz2Geh6CsLBJVE+bKWSQ82q5a4xZEkSYuQHXgZV5eywE5UKu8ssQcRgQA
VmGUY5k73rfY9Ofupf2gCaf/JSJNXKO/8Xjg0zAdklKtmgFjtna5Tyg9I90j7zn+
5swSpKuRpilN8MQH+6GWAnfqQlNoviTOpFeq3LwBtNVVOh08cOg6lko/bmebBC+R
TeQPACKS0Q0gCDPm9RYoU1pMUuYgfOwVfVRZK1prgi2Co7ZBUMOvYbNoKYoPIydr
ENBYljlU1OYwbzgR2nE+24fvhU8xdNOVG1xXYPAEHShu+p7dLIWRLhl8UCtRQpSR
1ofeVaJjgjrp29O+1OIQjB2kwCaRdfv/Gq1mztE/VlMU/r++E62OEzcH0aS+mnrg
yzfyUdI8IFv1q6FGT9yNSifWUWxQPmOKuC8kXsKYfqfJsFwKmHM=
=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
|
||
|
Linus Torvalds
|
e6f0bf09f0 |
integrity-v5.13
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAmCIuMgUHHpvaGFyQGxp bnV4LmlibS5jb20ACgkQa3kkZrA+cVqCew//SHwZ3LuqZUyqX1lCeW0eUsJQmf9P Rc++pK5+cigaYwg/LpLXBtIthOO91KJ+p4UrXIttlz6wRWqH5Enm/nQk3ngIIrWJ g4HsU4LoXeE5V1QZgDdUWM+ViaNvZuzT8enaUt4VvelHTRMoAgeTu7/amjx01t9L R8Qhmg2tBI5ehRgocNfEApNfaDyOcJhR14wAnGFhQH1pH2o0e+O+L5E6ke3Z2N0D oa9LBkA2wZFlTXkYHAYBdZjPW0BXX55brIusLHhrvFC16Ad9IVwcxRvRwYy4v2IK p8kO7EwGO4IkqsuL6FApgbW8/dTZXo3pD8YmplXhQdvAd9L/LshYhDePX7UsEp+O CL3rFvNFzZKC5qTx0UXLqjcktosOLTTFkAzRMg5taTljbTWBp9ziI8X0nTgoThLH fTs41Ol5v5veiq8JbZ1VixCoDJVOWtED/FuSZD41OyXJb7yGNpTnmvP6QJNIa1Yo vWsxSWmEX62xT85CzYLBR1Ow5+9t9+IjoCRt0pu0SRSps4gYcg1BjS+gIFnuCtB/ B9Ysh+rHo9ne9iojFd9TrEYQSAXebVEYSOjqPWV3E7gd0EXuF+JY0akj8JBduHt3 mfogxVtJdaHDjHtpHoHhBTpHG8l/E2n/47eFDmCiTsBGdL54R4jJSkOu8QmWBgzz HVNX+f86SJ2haUw= =gkFF -----END PGP SIGNATURE----- Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "In addition to loading the kernel module signing key onto the builtin keyring, load it onto the IMA keyring as well. Also six trivial changes and bug fixes" * tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies ima: Fix fall-through warnings for Clang integrity: Add declarations to init_once void arguments. ima: Fix function name error in comment. ima: enable loading of build time generated key on .ima keyring ima: enable signing of modules with build time generated key keys: cleanup build time module signing keys ima: Fix the error code for restoring the PCR value ima: without an IMA policy loaded, return quickly |
||
|
Linus Torvalds
|
10a3efd0fe |
perf tools changes for v5.13: 1st batch
perf stat:
- Add support for hybrid PMUs to support systems such as Intel Alderlake
and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP):
commit
|
||
David Howells
|
22650f1481 |
afs: Fix speculative status fetches
The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:
kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)
This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).
What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in. This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).
On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).
On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.
This means that:
- a status fetch can access the target vnode either side of the exclusive
section of the modification
- the status fetch could start before the modification, yet finish after,
and vice-versa.
- the status fetch and the modification RPCs can complete in either order.
- the status fetch can return either the before or the after DV from the
modification.
- the status fetch might regress the locally cached DV.
Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.
Fix this by the following means:
(1) Keep track of when we're performing a modification operation on a
vnode. This is done by marking vnode parameters with a 'modification'
note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
for the duration.
(2) Alter the speculation race detection to ignore speculative status
fetches if either the vnode is marked as being modified or the data
version number is not what we expected.
Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.
Fixes:
|
||
|
Linus Torvalds
|
7af81cd0c4 |
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or
kvmalloc_array instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device
remove after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve
hash recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmCMVxkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjD7B/4mucuval0w8OBl7MPE5mR/tPmU/Avr
iFmXQjofjXCXGdCk7XqOqKZGKlm/jCTQkhbZPEo5PTCZPf6iGyeoSFOC0xck9HUI
9EJNrnx6L0ch3OS5IREgc3oO7vXFnmnLvmo27t7yUaqWqdMBIZ/rEA6Ro7oq4pXc
fo/Yqka2iuS0X2RKhAbci2KAOWdeX400nqH7bHaR5VgOE3JRJtsEWRTmkngB4bzM
Bsz2zzaSnbFa/Nlg2cH69kw2NJpZsAoKmoQ0OJt7QQs+GYLvCbioQnlxLPSFhlKX
4mSPPPKy3TxaAqsHXt+gCG6Vs8VvvgK0iHIa9e0ifIy3wvLoosLpIXhc
=k1ND
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or kvmalloc_array
instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device remove
after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve hash
recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
* tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm raid: remove unnecessary discard limits for raid0 and raid10
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
dm integrity: use discard support when recalculating
dm integrity: increase RECALC_SECTORS to improve recalculate speed
dm integrity: don't re-write metadata if discarding same blocks
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
dm raid: fix fall-through warning in rs_check_takeover() for Clang
dm clone metadata: remove unused function
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm: replace dm_vcalloc()
dm space map common: fix division bug in sm_ll_find_free_block()
dm persistent data: packed struct should have an aligned() attribute too
dm btree spine: remove paranoid node_check call in node_prep_for_write()
dm space map disk: remove redundant calls to sm_disk_get_nr_free()
dm integrity: add the "reset_recalculate" feature flag
dm persistent data: remove unused return from exit_shadow_spine()
dm cache: remove needless request_queue NULL pointer checks
dm thin: remove needless request_queue NULL pointer check
dm: unexport dm_{get,put}_table_device
dm ebs: fix a few typos
...
|
||
|
Linus Torvalds
|
152d32aa84 |
ARM:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
||
|
Linus Torvalds
|
4f9701057a |
IOMMU Updates for Linux v5.13
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----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=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
|
||
|
Linus Torvalds
|
f34b2cf178 |
RDMA merge window pull request
This is significantly bug fixes and general cleanups. The noteworthy new
features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and
qib
- Quite a few general cleanups on spelling, error handling, static checker
detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool
-----BEGIN PGP SIGNATURE-----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=vsXA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
|
||
|
Linus Torvalds
|
9f67672a81 |
New features for ext4 this cycle include support for encrypted
casefold, ensure that deleted file names are cleared in directory blocks by zeroing directory entries when they are unlinked or moved as part of a hash tree node split. We also improve the block allocator's performance on a freshly mounted file system by prefetching block bitmaps. There are also the usual cleanups and bug fixes, including fixing a page cache invalidation race when there is mixed buffered and direct I/O and the block size is less than page size, and allow the dax flag to be set and cleared on inline directories. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmCLei4ACgkQ8vlZVpUN gaPZkgf/VH08xjMf3VthC+BpvVmChQXfV4yjigHbO2pmPyYWZhyJzkEGCQD8u2eB b7ShW+B1NCifcTU34xAkKHwEtakzzEv3WIMrT1oZNWrpfo8tt850EkwQggaGGDpd /HnP1/wLtziJ5hE6DwutmX7qB4VFghVj898MjDrEPSOBqItOjWps9mn/JWL7SHyI Dqzhf5XZTYPaXWuJmSmKw3q8O70JDHnZe/rRWlfX1jLI5KDtqp71Nw1B+gszUB66 IUdncyZKvInsyjYhkbCQ8U6WFih82MrbKeuGYDp/RFvg5eMELEYkwT9j0ofuDHq8 zn62sAlbOXv1DiqkPDHKVm9GkHx8/g== =UpnH -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "New features for ext4 this cycle include support for encrypted casefold, ensure that deleted file names are cleared in directory blocks by zeroing directory entries when they are unlinked or moved as part of a hash tree node split. We also improve the block allocator's performance on a freshly mounted file system by prefetching block bitmaps. There are also the usual cleanups and bug fixes, including fixing a page cache invalidation race when there is mixed buffered and direct I/O and the block size is less than page size, and allow the dax flag to be set and cleared on inline directories" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits) ext4: wipe ext4_dir_entry2 upon file deletion ext4: Fix occasional generic/418 failure fs: fix reporting supported extra file attributes for statx() ext4: allow the dax flag to be set and cleared on inline directories ext4: fix debug format string warning ext4: fix trailing whitespace ext4: fix various seppling typos ext4: fix error return code in ext4_fc_perform_commit() ext4: annotate data race in jbd2_journal_dirty_metadata() ext4: annotate data race in start_this_handle() ext4: fix ext4_error_err save negative errno into superblock ext4: fix error code in ext4_commit_super ext4: always panic when errors=panic is specified ext4: delete redundant uptodate check for buffer ext4: do not set SB_ACTIVE in ext4_orphan_cleanup() ext4: make prefetch_block_bitmaps default ext4: add proc files to monitor new structures ext4: improve cr 0 / cr 1 group scanning ext4: add MB_NUM_ORDERS macro ext4: add mballoc stats proc file ... |
||
|
Linus Torvalds
|
6bab076a3d |
dlm for 5.13
This set includes more dlm networking cleanups and improvements for making dlm shutdowns more robust. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJgjC8hAAoJEDgbc8f8gGmqf2kP/AgQEu1T1OKoJ8K0hEi4Axsn CIn09+Sb+mVnEa5LHGESw7WbsoodalMnn7D1GExpTXRy015d/SQjBdG9oWuWYnWO ouo/ElHAAtU4XCLcGIFYwv7vgUY+ag6Nc2yAvkIpETBKiCl6IHkoIwz1+B+Qgboo DOiu3iCYaPB3w13guMETDFZTrzM29k0VTnEgnGVSCKznm1gHUo7WuB17xyKOVFiY Y3KkzjqD+NOqtbXlTIEIBQ2PRD2pX1hroto5Qi85/HM/W/yieNYjIM51+kjX5SVy VJB/9JpVP/819TDuHPz3xHSxgXgXePWstuAH1WruUfoB4iLx0Fw2WI3snld2VFBn 5fFZ1+F/YnBQZ4ElQ6E1YciQLQM8SEA7vCgBpNYkWe+3DFvoKKeYNZEO2lTGtvnr EYcie8epQKj6eddLbW/hYvO44vhlcp8lV0AwT1mSCHHKn/8GbNB6kk1gW4PIxOqm 1PQ4Z5VBrxnxxoPD2wIZbmqIgPXKZIxg93SrR0RYyJbjoSgGz45n6I3dLwR5KUNE 9PQfx/UhmyVqE7UELdarb0hDaPXXzhh+T0LH6YHtihmAhfCA/dhiOYUhkWNtXCkE sQwWQq17xnC5juH/vp2ispBnSjUJq1kdVnN4l1RGkMNaSeVZeORH0A8jMwYE3vsK A6KMaBkfBpvuiY7UHCcK =0iOq -----END PGP SIGNATURE----- Merge tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This includes more dlm networking cleanups and improvements for making dlm shutdowns more robust" * tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: fix missing unlock on error in accept_from_sock() fs: dlm: add shutdown hook fs: dlm: flush swork on shutdown fs: dlm: remove unaligned memory access handling fs: dlm: check on minimum msglen size fs: dlm: simplify writequeue handling fs: dlm: use GFP_ZERO for page buffer fs: dlm: change allocation limits fs: dlm: add check if dlm is currently running fs: dlm: add errno handling to check callback fs: dlm: set subclass for othercon sock_mutex fs: dlm: set connected bit after accept fs: dlm: fix mark setting deadlock fs: dlm: fix debugfs dump |
||
|
Linus Torvalds
|
9ec1efbf9d |
fuse update for 5.13
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYIwY/wAKCRDh3BK/laaZ PNSmAPwLFCBGegvwxUSguiPmIXpDrrlG+USwTzGlxhVOg2ETGgEA6D+Lsz2uCBI3 xLkPAXD6uTbWLp13YtUSMXK+LR8V5wc= =Fl+Q -----END PGP SIGNATURE----- Merge tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix a page locking bug in write (introduced in 2.6.26) - Allow sgid bit to be killed in setacl() - Miscellaneous fixes and cleanups * tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: cuse: simplify refcount cuse: prevent clone virtiofs: fix userns virtiofs: remove useless function virtiofs: split requests that exceed virtqueue size virtiofs: fix memory leak in virtio_fs_probe() fuse: invalidate attrs when page writeback completes fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGID fuse: extend FUSE_SETXATTR request fuse: fix matching of FUSE_DEV_IOC_CLONE command fuse: fix a typo fuse: don't zero pages twice fuse: fix typo for fuse_conn.max_pages comment fuse: fix write deadlock |
||
|
Linus Torvalds
|
d652502ef4 |
overlayfs update for 5.13
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYIwTsgAKCRDh3BK/laaZ PDktAP41eScbCiFzXDRjXw9S7Wfd8HEct0y1p+9BUh8m3VdHfwEA0pDlJWNaJdYW nFixPJ5GsAfxo+1ags0vn06CUS/K4gA= =QlbJ -----END PGP SIGNATURE----- Merge tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: - Fix a regression introduced in 5.2 that resulted in valid overlayfs mounts being rejected with ELOOP (Too many levels of symbolic links) - Fix bugs found by various tools - Miscellaneous improvements and cleanups * tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: add debug print to ovl_do_getxattr() ovl: invalidate readdir cache on changes to dir with origin ovl: allow upperdir inside lowerdir ovl: show "userxattr" in the mount data ovl: trivial typo fixes in the file inode.c ovl: fix misspellings using codespell tool ovl: do not copy attr several times ovl: remove ovl_map_dev_ino() return value ovl: fix error for ovl_fill_super() ovl: fix missing revert_creds() on error path ovl: fix leaked dentry ovl: restrict lower null uuid for "xino=auto" ovl: check that upperdir path is not on a read-only mount ovl: plumb through flush method |
||
|
Linus Torvalds
|
d42f323a7d |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "A few misc subsystems and some of MM. 175 patches. Subsystems affected by this patch series: ia64, kbuild, scripts, sh, ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub, kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap, mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization, pagealloc, and memory-failure)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits) mm/memory-failure: unnecessary amount of unmapping mm/mmzone.h: fix existing kernel-doc comments and link them to core-api mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1 net: page_pool: use alloc_pages_bulk in refill code path net: page_pool: refactor dma_map into own function page_pool_dma_map SUNRPC: refresh rq_pages using a bulk page allocator SUNRPC: set rq_page_end differently mm/page_alloc: inline __rmqueue_pcplist mm/page_alloc: optimize code layout for __alloc_pages_bulk mm/page_alloc: add an array-based interface to the bulk page allocator mm/page_alloc: add a bulk page allocator mm/page_alloc: rename alloced to allocated mm/page_alloc: duplicate include linux/vmalloc.h mm, page_alloc: avoid page_to_pfn() in move_freepages() mm/Kconfig: remove default DISCONTIGMEM_MANUAL mm: page_alloc: dump migrate-failed pages mm/mempolicy: fix mpol_misplaced kernel-doc mm/mempolicy: rewrite alloc_pages_vma documentation mm/mempolicy: rewrite alloc_pages documentation mm/mempolicy: rename alloc_pages_current to alloc_pages ... |
||
|
Linus Torvalds
|
65ec0a7d24 |
This is the bulk of the pin control changes for the v5.13 kernel cycle
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the
device tree. The device tree is a functional programming
language and does not imply any order, so the right thing is
for the pin control core to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to
go in and select functions for a pin manually (iteratively, at
the prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver
making use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for
MIPS Broadcom devices to instead use the pin control subsystem.
New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362,
BCM6368, BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs
on PM8008 are supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and
X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic
fixes for the behaviour of the Ingenic pin controller.
Add DMIC pins for JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls.
-----BEGIN PGP SIGNATURE-----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=QrEn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
|
||
|
Linus Torvalds
|
592fa9532d |
Merge branch 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit - bigger refactoring for the MPC driver - support for full software nodes - no need to work around with only properties anymore - we now have 'devm_i2c_add_adapter', too - sub-system wide fixes for the RPM refcounting problem which often caused a leak when an error was encountered during probe - the rest is usual driver updates and improvements * 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching i2c: mediatek: Fix wrong dma sync flag i2c: mediatek: Fix send master code at more than 1MHz i2c: sh7760: fix IRQ error path i2c: i801: Add support for Intel Alder Lake PCH-M i2c: core: Fix spacing error by checkpatch i2c: s3c2410: simplify getting of_device_id match data i2c: nomadik: Fix space errors i2c: iop3xx: Fix coding style issues i2c: amd8111: Fix coding style issues i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource() i2c: mpc: Use device_get_match_data() helper i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery i2c: mpc: Use devm_clk_get_optional() i2c: mpc: Update license and copyright i2c: mpc: Interrupt driven transfer i2c: sh7760: add IRQ check i2c: rcar: add IRQ check i2c: mlxbf: add IRQ check i2c: jz4780: add IRQ check ... |
||
|
Linus Torvalds
|
efd8929b9e |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - Surface Aggregator Module support from Maximilian Luz - Apple Magic Mouse 2 support from John Chen - Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from Hans de Goede - Thinkpad X1 Tablet keyboard support from Hans de Goede - Support for FTDI FT260 I2C host adapter from Michael Zaidman - other various small device-specific quirks, fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits) HID: wacom: Setup pen input capabilities to the targeted tools HID: hid-sensor-hub: Move 'hsdev' description to correct struct definition HID: hid-sensor-hub: Remove unused struct member 'quirks' HID: wacom_sys: Demote kernel-doc abuse HID: hid-sensor-custom: Remove unused variable 'ret' HID: hid-uclogic-params: Ensure function names are present and correct in kernel-doc headers HID: hid-uclogic-rdesc: Kernel-doc is for functions and structs HID: hid-logitech-hidpp: Fix conformant kernel-doc header and demote abuses HID: hid-picolcd_core: Remove unused variable 'ret' HID: hid-kye: Fix incorrect function name for kye_tablet_enable() HID: hid-core: Fix incorrect function name in header HID: hid-alps: Correct struct misnaming HID: usbhid: hid-pidff: Demote a couple kernel-doc abuses HID: usbhid: Repair a formatting issue in a struct description HID: hid-thrustmaster: Demote a bunch of kernel-doc abuses HID: input: map battery capacity (00850065) HID: magicmouse: fix reconnection of Magic Mouse 2 HID: magicmouse: fix 3 button emulation of Mouse 2 HID: magicmouse: add Apple Magic Mouse 2 support HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard ... |