[ Upstream commit 2997d94b5d ]
When writing a task id to the "tasks" file in an rdtgroup,
rdtgroup_tasks_write() treats the pid as a number in the current pid
namespace. But when reading the "tasks" file, rdtgroup_tasks_show() shows
the list of global pids from the init namespace, which is confusing and
incorrect.
To be more robust, let the "tasks" file only show pids in the current pid
namespace.
Fixes: e02737d5b8 ("x86/intel_rdt: Add tasks files")
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/all/20230116071246.97717-1-shawnwang@linux.alibaba.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 967c28b23f ]
After heavily stressing EROFS with several images which include a
hand-crafted image of repeated patterns for more than 46 days, I found
two chains could be linked with each other almost simultaneously and
form a loop so that the entire loop won't be submitted. As a
consequence, the corresponding file pages will remain locked forever.
It can be _only_ observed on data-deduplicated compressed images.
For example, consider two chains with five pclusters in total:
Chain 1: 2->3->4->5 -- The tail pcluster is 5;
Chain 2: 5->1->2 -- The tail pcluster is 2.
Chain 2 could link to Chain 1 with pcluster 5; and Chain 1 could link
to Chain 2 at the same time with pcluster 2.
Since hooked chains are all linked locklessly now, I have no idea how
to simply avoid the race. Instead, let's avoid hooked chains completely
until I could work out a proper way to fix this and end users finally
tell us that it's needed to add it back.
Actually, this optimization can be found with multi-threaded workloads
(especially even more often on deduplicated compressed images), yet I'm
not sure about the overall system impacts of not having this compared
with implementation complexity.
Fixes: 267f2492c8 ("erofs: introduce multi-reference pclusters (fully-referenced)")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20230526201459.128169-4-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37222082f ]
Fix filemap_splice_read() to use file->f_mapping->host, not file->f_inode,
as the source of the file size because in the case of a block device,
file->f_inode points to the block-special file (which is typically 0
length) and not the backing store.
Fixes: 07073eb01c ("splice: Add a func to do a splice from a buffered file without ITER_PIPE")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-2-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a13bd91be2 ]
commit 50e34d7881 ("block: disable the elevator int del_gendisk")
move rq_qos_exit() from disk_release() to del_gendisk(), this will
introduce some problems:
1) If rq_qos_add() is triggered by enabling iocost/iolatency through
cgroupfs, then it can concurrent with del_gendisk(), it's not safe to
write 'q->rq_qos' concurrently.
2) Activate cgroup policy that is relied on rq_qos will call
rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is
called in the middle, null-ptr-dereference will be triggered in
blkcg_activate_policy().
3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the
disk, then if rq_qos_exit() from del_gendisk() is done before
rq_qos_add(), then memory will be leaked.
This patch add a new disk level mutex 'rq_qos_mutex':
1) The lock will protect rq_qos_exit() directly.
2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be
called from disk initialization for now because wbt can't be
destructed until rq_qos_exit(), so it's safe not to protect wbt for
now. Hoever, in case that rq_qos dynamically destruction is supported
in the furture, this patch also protect rq_qos_add() from wbt_init()
directly, this is enough because blk-sysfs already synchronize
writers with disk removal.
3) For iocost and iolatency, in order to synchronize disk removal and
cgroup configuration, the lock is held after blkdev_get_no_open()
from blkg_conf_open_bdev(), and is released in blkg_conf_exit().
In order to fix the above memory leak, disk_live() is checked after
holding the new lock.
Fixes: 50e34d7881 ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230414084008.2085155-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ddbe2a7e0 ]
Change the type of the second argument of bdev_op_is_zoned_write() from
blk_opf_t into enum req_op because this function expects an operation
without flags as second argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 8cafdb5ab9 ("block: adapt blk_mq_plug() to not plug for writes that require a zone lock")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230517174230.897144-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d97217e7f0 ]
Passthrough requests should never be queued to the I/O scheduler,
as scheduling these opaque requests doesn't make sense, and I/O
schedulers might require req->bio to be always valid.
We never let passthrough requests insert into the scheduler before
commit 1c2d2fff6d ("block: wire-up support for passthrough plugging"),
restore this behavior even for passthrough requests issued under a plug.
[hch: use blk_mq_insert_requests for passthrough requests,
fix up the commit message and comments]
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGS2=YosaYaUTEMU3uaf+y=8MqSrhL7sYsJn8EwbaM=76p_4Qg@mail.gmail.com/
Investigated-by: Yu Kuai <yukuai1@huaweicloud.com>
Fixes: 1c2d2fff6d ("block: wire-up support for passthrough plugging")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230518053101.760632-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ed8b50975 ]
Since commit 3b5c3f000c2e ("s390/kasan: move shadow mapping
to decompressor") the decompressor establishes mappings for
the shadow memory and sets initial protection attributes to
RWX. The decompressed kernel resets protection to RW+NX
later on.
In case a shadow memory range is not aligned on page boundary
(e.g. as result of mem= kernel command line parameter use),
the "Checked W+X mappings: FAILED, 1 W+X pages found" warning
hits.
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 557b19709d ("s390/kasan: move shadow mapping to decompressor")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 247c8d2f98 ]
A couple of functions from fs/pipe.c are used both internally
and for the watch queue code, but the declaration is only
visible when the latter is enabled:
fs/pipe.c:1254:5: error: no previous prototype for 'pipe_resize_ring'
fs/pipe.c:758:15: error: no previous prototype for 'account_pipe_buffers'
fs/pipe.c:764:6: error: no previous prototype for 'too_many_pipe_buffers_soft'
fs/pipe.c:771:6: error: no previous prototype for 'too_many_pipe_buffers_hard'
fs/pipe.c:777:6: error: no previous prototype for 'pipe_is_unprivileged_user'
Make the visible unconditionally to avoid these warnings.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20230516195629.551602-1-arnd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d6149086b4 upstream.
This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.
This reverts commit e749dd10e5.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1cfbd52ed upstream.
Scan elements for x,y,z channels is little endian and requires no bit shifts.
LE vs. BE is controlled in register SENS_CONFIG2 and bit LE_BE, default
value is LE.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230605103223.1400980-1-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e58e3a6f8 upstream.
Pointer to indio_dev structure is obtained via spi_get_drvdata() at
the beginning of function ad7192_setup(), but the spi->dev->driver_data
member is not initialized, hence a NULL pointer is returned.
Fix by changing ad7192_setup() signature to take pointer to struct
iio_dev, and get ad7192_state pointer via st = iio_priv(indio_dev);
Fixes: bd5dcdeb3f ("iio: adc: ad7192: convert to device-managed functions")
Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230530075311.400686-2-fl.scratchpad@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4cba07e64 upstream.
Apparently, despite the name Digital Input Configuration Register, the
settings in the DIN_CONFIGx registers also affect other channel
functions. In particular, setting a non-zero value in the DIN_SINK
field breaks the resistance measurement function.
Now, one can of course argue that specifying a drive-strength-microamp
property along with a adi,ch-func which is not one of the digital
input functions is a bug in the device tree. However, we have a rather
complicated setup with instances of ad74412r on external hardware
modules, and have set a default drive-strength-microamp in our DT
fragments describing those, merely modifying the adi,ch-func settings
to reflect however the modules have been wired up. And restricting
this setting to just being done for digital input doesn't make the
driver any more complex.
Fixes: 504eb48558 (iio: ad74413r: wire up support for drive-strength-microamp property)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230503105042.453755-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3adbaa30d9 upstream.
The driver can register a typec port if suitable firmware properties are
present. But if the driver is removed through sysfs unbind, rmmod or
similar, then it does not clean up after itself and the typec port
device remains registered. This can be seen in sysfs, where stale typec
ports get left over in /sys/class/typec.
In order to fix this we have to add an i2c_driver remove function and
call typec_unregister_port(), which is a no-op in the case where no
typec port is created and the pointer remains NULL.
In the process we should also put the fwnode_handle when the typec port
isn't registered anymore, including if an error occurs during probe. The
typec subsystem does not increase or decrease the reference counter for
us, so we track it in the driver's private data.
Note that the conditional check on TYPEC_PWR_MODE_PD was removed in the
probe path because a call to tusb320_set_adv_pwr_mode() will perform an
even more robust validation immediately after, hence there is no
functional change here.
Fixes: bf7571c00d ("extcon: usbc-tusb320: Add USB TYPE-C support")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0c2fcb132 upstream.
For the dual-role port, it will assign the phy dev to usb-phy dev and
use the port dev driver as the dev driver of usb-phy.
When we try to destroy the port dev, it will destroy its dev driver
as well. But we did not remove the reference from usb-phy dev. This
might cause the use-after-free issue in KASAN.
Fixes: e8f7d2f409 ("phy: tegra: xusb: Add usb-phy support")
Cc: stable@vger.kernel.org
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230609062932.3276509-1-haotienh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0aabed9ca upstream.
In scenarios where pullup relies on resume (get sync) to initialize
the controller and set the run stop bit, then core_init is followed by
gadget_resume which will eventually set run stop bit.
But in cases where the core_init fails, the return value is not sent
back to udc appropriately. So according to UDC the controller has
started but in reality we never set the run stop bit.
On systems like Android, there are uevents sent to HAL depending on
whether the configfs_bind / configfs_disconnect were invoked. In the
above mentioned scnenario, if the core init fails, the run stop won't
be set and the cable plug-out won't result in generation of any
disconnect event and userspace would never get any uevent regarding
cable plug out and we never call pullup(0) again. Furthermore none of
the next Plug-In/Plug-Out's would be known to configfs.
Return back the appropriate result to UDC to let the userspace/
configfs know that the pullup failed so they can take appropriate
action.
Fixes: 77adb8bdf4 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffa5f7a3bf upstream.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.
In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 514ca14ed5 upstream.
Back during the discussion of
commit a9a3ed1eff ("x86: Fix early boot crash on gcc-10, third try")
we discussed the need for a function attribute to control the omission
of stack protectors on a per-function basis; at the time Clang had
support for no_stack_protector but GCC did not. This was fixed in
gcc-11. Now that the function attribute is available, let's start using
it.
Callers of boot_init_stack_canary need to use this function attribute
unless they're compiled with -fno-stack-protector, otherwise the canary
stored in the stack slot of the caller will differ upon the call to
boot_init_stack_canary. This will lead to a call to __stack_chk_fail()
then panic.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94722
Link: https://lore.kernel.org/all/20200316130414.GC12561@hirez.programming.kicks-ass.net/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230412-no_stackp-v2-1-116f9fe4bbe7@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: ndesaulniers@google.com <ndesaulniers@google.com>
commit fb49c45532 upstream.
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea0 ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 028725e733 upstream.
commit dd0ff4d12d ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak. But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.
Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.
Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com
Fixes: f41f2ed43c ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dca4ac6fc upstream.
Commit c145e0b47c ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them. Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().
Link: https://lkml.kernel.org/r/20230523004312.1807357-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965
Fixes: c145e0b47c ("mm: streamline COW logic in do_swap_page()")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Closes: https://lore.kernel.org/all/5050805753ac469e8d727c797c2218a9d780d434.camel@mediatek.com/
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c7873e336 upstream.
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33313a747e upstream.
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c137381f71 upstream.
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24be4d0b46 upstream.
Commit ae870a68b5 ("arm64/mm: Convert to using
lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if
CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the
ifdef.
As a result, building kernel without the config fails with undeclared
variable error as below:
arch/arm64/mm/fault.c: In function 'do_page_fault':
arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'?
624 | vma = lock_mm_and_find_vma(mm, addr, regs);
| ^~~
| vmap
Fix it by moving the declaration out of the ifdef.
Fixes: ae870a68b5 ("arm64/mm: Convert to using lock_mm_and_find_vma()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2b308044d upstream.
None have been defined yet, so reject anybody setting any. Mesa sets
it to 0 anyway.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 249bed821b upstream.
The version is fetched once in check_version(), which then does some
validation and then overwrites the version in userspace with the API
version supported by the kernel. copy_params() then fetches the version
from userspace *again*, and this time no validation is done. The result
is that the kernel's version number is completely controllable by
userspace, provided that userspace can win a race condition.
Fix this flaw by not copying the version back to the kernel the second
time. This is not exploitable as the version is not further used in the
kernel. However, it could become a problem if future patches start
relying on the version field.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b230235b38 upstream.
Kernel build now uses the gtags "-C (--directory)" option, available
since GNU GLOBAL v6.6.5. Update the documentation accordingly.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lists.gnu.org/archive/html/info-global/2020-09/msg00000.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1b37563ca upstream.
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd4aed8d98 upstream.
Ackerley Tng reported an issue with hugetlbfs fallocate as noted in the
Closes tag. The issue showed up after the conversion of hugetlb page
cache lookup code to use page_cache_next_miss. User visible effects are:
- hugetlbfs fallocate incorrectly returns -EEXIST if pages are presnet
in the file.
- hugetlb pages will not be included in core dumps if they need to be
brought in via GUP.
- userfaultfd UFFDIO_COPY will not notice pages already present in the
cache. It may try to allocate a new page and potentially return
ENOMEM as opposed to EEXIST.
Revert the use page_cache_next_miss() in hugetlb code.
IMPORTANT NOTE FOR STABLE BACKPORTS:
This patch will apply cleanly to v6.3. However, due to the change of
filemap_get_folio() return values, it will not function correctly. This
patch must be modified for stable backports.
[dan.carpenter@linaro.org: fix hugetlbfs_pagecache_present()]
Link: https://lkml.kernel.org/r/efa86091-6a2c-4064-8f55-9b44e1313015@moroto.mountain
Link: https://lkml.kernel.org/r/20230621212403.174710-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b3 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Closes: https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f0220af58 upstream.
commit eb0764b822 ("cxl/port: Enable the HDM decoder capability for switch ports")
...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.
While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:
"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."
So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.
Cc: <stable@vger.kernel.org>
Fixes: eb0764b822 ("cxl/port: Enable the HDM decoder capability for switch ports")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168685882012.3475336.16733084892658264991.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cded49ba36 upstream.
NFS doesn't properly support reporting the btime in getattr (yet), but
61a968b4f0 mistakenly added it to the request_mask. This causes statx
for STATX_BTIME to report a zeroed out btime instead of properly
clearing the flag.
Cc: stable@vger.kernel.org # v6.3+
Fixes: 61a968b4f0 ("nfs: report the inode version in getattr if requested")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214134
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f66066bc51 upstream.
While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.
But it turns out that in commit 8d7071af89 ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:
if (!(vma->vm_flags & VM_GROWSDOWN))
return -EFAULT;
and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.
At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.
The solution is instead to just codify the fact that yes, during
execve(), the stack grows down. This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).
So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.
Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.
Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af89 ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112a7f9c8e upstream.
ACPI r6.5, sec 6.5.4, describes how AML is unable to access an
OperationRegion unless _REG has been called to connect a handler:
The OS runs _REG control methods to inform AML code of a change in the
availability of an operation region. When an operation region handler is
unavailable, AML cannot access data fields in that region. (Operation
region writes will be ignored and reads will return indeterminate data.)
The PCI core does not call _REG at any time, leading to the undefined
behavior mentioned in the spec.
The spec explains that _REG should be executed to indicate whether a
given region can be accessed:
Once _REG has been executed for a particular operation region, indicating
that the operation region handler is ready, a control method can access
fields in the operation region. Conversely, control methods must not
access fields in operation regions when _REG method execution has not
indicated that the operation region handler is ready.
An example included in the spec demonstrates calling _REG when devices are
turned off: "when the host controller or bridge controller is turned off
or disabled, PCI Config Space Operation Regions for child devices are
no longer available. As such, ETH0’s _REG method will be run when it
is turned off and will again be run when PCI1 is turned off."
It is reported that ASMedia PCIe GPIO controllers fail functional tests
after the system has returning from suspend (S3 or s2idle). This is because
the BIOS checks whether the OSPM has called the _REG method to determine
whether it can interact with the OperationRegion assigned to the device as
part of the other AML called for the device.
To fix this issue, call acpi_evaluate_reg() when devices are transitioning
to D3cold or D0.
[bhelgaas: split pci_power_t checking to preliminary patch]
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#reg-region
Link: https://lore.kernel.org/r/20230620140451.21007-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5557b62634 upstream.
Previously acpi_pci_set_power_state() assumed the requested power state was
valid (PCI_D0 ... PCI_D3cold). If a caller supplied something else, we
could index outside the state_conv[] array and pass junk to
acpi_device_set_power().
Validate the pci_power_t parameter and return -EINVAL if it's invalid.
Link: https://lore.kernel.org/r/20230621222857.GA122930@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a9b234520 upstream.
This was forgotten in the original submission.
It is unknown why it worked for x86_64 on some compiler without this
attribute.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20230520133237.GA27501@1wt.eu/
Fixes: 0d8c461adb ("tools/nolibc: x86_64: add stackprotector support")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03f889378f upstream.
MMU version of lock_mm_and_find_vma releases the mm lock before
returning when VMA is not found. Do the same in noMMU version.
This fixes hang on an attempt to handle protection fault.
Fixes: d85a143b69 ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85a143b69 upstream.
It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:
config PFAULT
bool "Handle protection faults" if EXPERT && !MMU
default y
help
Handle protection faults. MMU configurations must enable it.
noMMU configurations may disable it if used memory map never
generates protection faults or faults are always fatal.
If unsure, say Y.
which completely violated my expectations of the page fault handling.
End result: Guenter reports that the xtensa no-MMU builds all fail with
arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’
because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.
Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a050ba1e74 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e55e5df193 upstream.
As already mentioned in my merge message for the 'expand-stack' branch,
we have something like 24 different versions of the page fault path for
all our different architectures, all just _slightly_ different due to
various historical reasons (usually related to exactly when they
branched off the original i386 version, and the details of the other
architectures they had in their history).
And a few of them had some silly mistake in the conversion.
Most of the architectures call the faulting address 'address' in the
fault path. But not all. Some just call it 'addr'. And if you end up
doing a bit too much copy-and-paste, you end up with the wrong version
in the places that do it differently.
In this case it was csky.
Fixes: a050ba1e74 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea3f827287 upstream.
In commit 8d7071af89 ("mm: always expand the stack with the mmap write
lock held") I tried to deal with the remaining odd page fault handling
cases. The oddest one is ia64, which has stacks that grow both up and
down. And because ia64 was _so_ odd, I asked people to verify the end
result.
But a close second oddity is parisc, which is the only one that has a
main stack growing up (our "CONFIG_STACK_GROWSUP" config option). But
it looked obvious enough that I didn't worry about it.
I should have worried a bit more. Not because it was particularly
complex, but because I just used the wrong variable name.
The previous vma isn't called "prev", it's called "prev_vma". Blush.
Fixes: 8d7071af89 ("mm: always expand the stack with the mmap write lock held")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b26eadbf2 upstream.
The sparc32 conversion to lock_mm_and_find_vma() in commit a050ba1e74
("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
missed the fact that we didn't actually have a 'regs' pointer available
in the 'force_user_fault()' case.
It's there in the regular page fault path ("do_sparc_fault()"), but not
the window underflow/overflow paths.
Which is all fine - we can just pass in a NULL pointer. The register
state is only used to avoid deadlock with kernel faults, which is not
the case for any of these register window faults.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a050ba1e74 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86edac7d38 upstream.
This reverts commit f05c7b7d9e.
That change was causing a regression in the generic-adc-thermal-probed
bootrr test as reported in the kernelci-results list [1].
A proper rework will take longer, so revert it for now.
[1] https://groups.io/g/kernelci-results/message/42660
Fixes: f05c7b7d9e ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe")
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe2511126 upstream.
commit 498ba20690 ("HID: logitech-hidpp: Don't restart communication if
not necessary") put restarting communication behind that flag, and this
was apparently necessary on the T651, but the flag was not set for it.
Fixes: 498ba20690 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Hommey <mh@glandium.org>
Link: https://lore.kernel.org/r/20230617230957.6mx73th4blv7owqk@glandium.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 944ee77dc6 upstream.
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release().
Link: https://github.com/systemd/systemd/issues/27947
Fixes: 8590222e4b ("HID: hidraw: Replace hidraw device table mutex with a rwsem")
Cc: stable@vger.kernel.org
Signed-off-by: Ludvig Michaelsson <ludvig.michaelsson@yubico.com>
Link: https://lore.kernel.org/r/20230621-hidraw-race-v1-1-a58e6ac69bab@yubico.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
