When multiple links switch channel contexts around the same time, mac80211
may complete CSA for several links together and invoke
ath12k_mac_op_switch_vif_chanctx() with an array of vifs spanning more than
one underlying radio in a single-wiphy configuration.
The driver currently assumes that all entries in the vifs array belong to the
same radio and derives the radio context from the first element. On multi-radio
hardware, this can lead to incorrect vdev selection/updates and may corrupt
driver state when the number of vifs exceeds what a single radio supports.
Fix this by validating each vif's switch request and then processing vifs
grouped by their associated radio. For each vif, ensure the band does not
change across the switch and that both old/new channel contexts resolve to a
valid ath12k device. Reject attempts to move a vif between radios (not
supported for now) and return -EOPNOTSUPP to upper layers.
Then, iterate through the input vifs, collect all unprocessed entries that map
to the same radio, and invoke ath12k_mac_update_vif_chan() separately for each
radio group. This removes any reliance on mac80211 providing the array grouped
by radio or sharing old_ctx pointers across vifs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260522091828.3199584-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the driver uses memory profile parameters to determine the
maximum number of supported clients, with a default limit of 512 for
single-radio and 128 for DBS and DBS+SBS configurations. However,
some devices have lower hardware limits depending on the radio
configuration. Exceeding these hardware-specific limits can lead to
firmware crashes.
Add hardware parameters in ath12k_hw_params to define the maximum supported
clients for each radio configuration. The driver uses the minimum of the
memory profile limit and the hardware capability limit to prevent exceeding
hardware constraints.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260515030909.3312511-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: a27fa6148d ("wifi: ath12k: support change_sta_links() mac80211 op")
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512044906.1735821-3-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 477cabfdb7 ("wifi: ath12k: modify link arvif creation and removal for MLO")
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512044906.1735821-2-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For some chipsets, firmware can report HTT_T2H_MSG_TYPE_PEER_MAP2 with
peer_id 0 as a valid value for mapping ath12k_dp_link_peer to
ath12k_dp_peer.
ath12k_dp_peer_find_by_peerid() currently treats peer_id 0 as invalid.
When firmware assigns peer_id 0, peer lookup fails. As a result,
DHCP OFFER packets are dropped in __ieee80211_rx_handle_packet()
because pubsta is NULL.
ath12k_dp_rx_deliver_msdu() <- rx_info->peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
ieee80211_rx_napi <- pubsta NULL
ieee80211_rx_list
__ieee80211_rx_handle_packet <- pubsta NULL, skb undelivered
The following error in the TX completion path is caused by the same issue:
ath12k_wifi7_pci 0000:04:00.0: dp_tx: failed to find the peer with peer_id 0
The error message is triggered by:
ath12k_wifi7_dp_tx_complete_msdu
ath12k_dp_link_peer_find_by_peerid <- ts->peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
ath12k_dp_tx_htt_tx_complete_buf
ath12k_dp_link_peer_find_by_peerid <- peer_id 0
ath12k_dp_peer_find_by_peerid -> peer NULL
Fix this by allowing peer_id 0 in ath12k_dp_peer_find_by_peerid() and
rejecting only values >= ATH12K_DP_PEER_ID_INVALID.
Also update peer_id 0 handling in monitor path:
Always call ath12k_dp_link_peer_find_by_peerid() in
ath12k_dp_rx_h_find_link_peer() to fetch the peer, including when
peer_id is 0.
Always store peer_id in ppdu_info->peer_id in
ath12k_wifi7_dp_mon_rx_parse_status_tlv(), including peer_id 0.
Tested-on: QCC2072 hw1.0 PCI WLAN.COL.1.0.c2-00074-QCACOLSWPL_V1_TO_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hangtian Zhu <hangtian.zhu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512025732.1297849-1-hangtian.zhu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 9a0dddfb30 ("wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512021108.2031651-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In monitor mode, the driver incorrectly assigns the legacy rate
to the rate_idx field of the radiotap header for HT/VHT/HE/EHT
frames, ignoring the actual MCS value parsed from the hardware.
This causes packet analyzers (like Wireshark) to display incorrect
MCS values (e.g., legacy base rates instead of the true MCS).
Fix this by assigning ppdu_info->mcs as the default rate_mcs
in ath12k_dp_mon_fill_rx_rate(), and remove rate_idx assignments in
ath12k_dp_mon_update_radiotap() to preserve
the previously calculated MCS values (including the HT NSS offset).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ
Fixes: 5393dcb452 ("wifi: ath12k: change the status update in the monitor Rx")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220864
Signed-off-by: Kwan Lai Chee Hou <laicheehou9@gmail.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507015336.14636-1-laicheehou9@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When P2P support is enabled, wpa_supplicant creates a p2p-device
interface by default, which implicitly consumes one vdev. On systems
managed by NetworkManager, this interface cannot be reliably disabled,
leaving only two usable interfaces for user configurations.
Increase num_vdevs to four for QCA6390 hw2.0, WCN6855 hw2.0/hw2.1,
QCA2066 hw2.1, and QCA6698AQ hw2.1 to account for the implicit
p2p-device and enable common concurrency scenarios such as AP + AP + STA.
This change increases interface concurrency in the two-channel scenario
by raising the maximum vdev limit, while keeping other combination rules
unchanged.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260525020711.2590815-1-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the WBM error path, while processing TKIP MIC errors, MSDU length
is fetched from the hal_rx_desc's msdu_end. This MSDU length is
directly passed to skb_put() without validation. In stress test
scenarios, the WBM error ring may receive invalid descriptors, which
could lead to an invalid MSDU length.
To fix this, add a check to drop the skb when the calculated MSDU
length is greater than the skb size.
This is adapted from the discussion/patch of the ath12k driver [1].
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Link: https://lore.kernel.org/linux-wireless/20250416021903.3178962-1-nithyanantham.paramasivam@oss.qualcomm.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512022351.2033155-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath11k_dp_rx_h_undecap_nwifi() function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially result in invalid data access and memory corruption.
Kernel stack is corrupted in: ath11k_dp_rx_h_undecap+0x6b0/0x6b0 [ath11k]
Call trace:
ath11k_dp_rx_h_mpdu+0x0/0x2e8 [ath11k]
ath11k_dp_rx_h_mpdu+0x1e0/0x2e8 [ath11k]
ath11k_dp_rx_wbm_err+0x1e0/0x450 [ath11k]
ath11k_dp_rx_process_wbm_err+0x2fc/0x460 [ath11k]
ath11k_dp_service_srng+0x2e0/0x348 [ath11k]
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
This adapted from the discussion/patch of the ath12k driver [1].
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Link: https://lore.kernel.org/linux-wireless/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512022351.2033155-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Convert kzalloc_obj + kcalloc to kzalloc_flex to save an allocation.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation before any potential accesses.
kzalloc_flex does this anyway for GCC >= 15.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428205017.26288-1-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This reverts commit 4e88de313f.
The early GuC FW definition meant for our CI branch was accidentally
merged to the drm-xe-next branch instead. This GuC FW will never be
released to linux-firmware, so we do not want the definition to be
available in the mainline Linux codebase.
Fixes: 4e88de313f ("drm/xe/nvls: Define GuC firmware for NVL-S")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v7.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260529193558.185436-11-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 65b8e0ac86)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The @dev member described in the kernel-doc does not exist in the
struct. Remove the stale entry.
Fixes: 0610430e3d ("HID: logitech-hidpp: add input_device ptr to struct hidpp_device")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Use __free(kfree) cleanup facility for the temporary buffer in
wacom_wac_queue_flush() to simplify error paths and ensure the buffer
is freed automatically when it goes out of scope.
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing.
Reported-by: Sashiko-bot <sashiko-bot@kernel.org>
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo
doesn't have enough space for the incoming report. If the kfifo is
empty, kfifo_skip() reads stale data left in the kmalloc'd buffer
via __kfifo_peek_n() and interprets it as a record length, advancing
fifo->out by that garbage value. This corrupts the internal kfifo
state, causing kfifo_unused() to return a value much larger than the
actual buffer size, which bypasses __kfifo_in_r()'s guard:
if (len + recsize > kfifo_unused(fifo))
return 0;
kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to
3842 bytes past the 256-byte buffer.
Add a !kfifo_is_empty() condition to the while loop so kfifo_skip()
is never called on an empty fifo, and check the return value of
kfifo_in() to reject reports that are too large for the fifo.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The pen setup for this device uses bluetooth for
communicating battery levels and status instead of
reporting it over i2c.
Without this quirk, the device either reports an
extra, broken phantom battery, or hangs.
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The module is storing an integer inside the drvdata pointer, which is
confusing - furthermore this integer is mutable. When its value is
changed it is set again using the 'hid_set_drvdata' API within
the 'cp_event' function.
Let's fix this, create and allocate the 'cp_device' struct that is then
set as the drvdata and then simply use its integer 'quirks' field for
storing the quirks, which shall make the code cleaner, type-safe,
consistent and more readable.
This makes the cast to (void *) during storage unnecessary and the cast
to (unsigned long) during retrieval is also removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The module is storing an integer inside the drvdata pointer, which is
confusing, lets fix this and set the whole of 'hid_device_id' struct
as the drvdata and then simply use its integer 'driver_data' field for
quirks, which shall make the code cleaner, type-safe, consistent and
more readable.
This makes the cast to (void *) during storage a bit safer (just to
suppress the const qualifier warning) and the cast to (unsigned long)
during retrieval is removed.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Some tab characters snuck into the data layout table for turntable
extensions, which resulted in the table only looking right at a tabstop
of 4, which is uncommon in the kernel. Change them to the equivalent
amount of spaces, which should look correct in any editor.
While at it, also fix the other whitespace errors (trailing spaces at
end of line) introduced in the same commit.
Fixes: 05086f3db5 ("HID: wiimote: Add support for the DJ Hero turntable")
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The MSI Bravo 17 C7VF routes its internal digital microphone through
the ACP6x. The machine driver only enables the DMIC for boards present
in the DMI quirk table, so on this model the internal mic is never
detected and no capture device is created.
Add a quirk entry matching the board's DMI identifiers so the DMIC is
enabled and the internal microphone works.
Signed-off-by: João Miguel <jmiguel.ghp@gmail.com>
Link: https://patch.msgid.link/20260523213548.5219-1-jmiguel.ghp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This patchset adds support for Push/Pull mode modules.
Push-pull mode uses dedicated shared-memory modules that allow the DSP
to access the PCM circular buffer directly. In addition to reducing
fragment queueing and ACK handling in the host driver,
This mode exposes a DSP-maintained position buffer that provides
fine-grained hardware pointer updates. Unlike the Read/Write Shared
Memory endpoitn modules, which are period based, where the reported
pointer advances only at period boundaries, where as push-pull mode
allows .pointer() to reflect sub-period progress, improving pointer
accuracy.
Also the driver now can queue buffers which are less than period size,
which makes tests like alsa_conformance_test happy.
Now the pointer update visibility is around 1ms, compared to min of
10ms with read/write shared memory endpoints.
Along with the circular buffer support, this patchset also adds
watermark event support to provide a period level event from dsp to
notify about period progress.
Tested this on T14s, Arduino VENTUNO-Q platforms.
Tplg related changes are available at:
https://github.com/Srinivas-Kandagatla/audioreach-topology/tree/push/pull
Link: https://patch.msgid.link/20260528185806.6316-1-srinivas.kandagatla@oss.qualcomm.com
Wire q6apm-dai to use push-pull shared memory graphs.
For push-pull graphs, configure the circular buffer and position buffer,
register watermark events, and use watermark notifications to report PCM
period elapsed. Skip legacy fragment queueing and ACK handling because the
DSP reads/writes directly from the shared circular buffer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Push-pull shared memory modules can report watermark events when the DSP
read/write index reaches configured circular buffer levels.
Add support for registering watermark levels with the shared memory module
and route the resulting module event to q6apm clients using a new
APM_CLIENT_EVENT_WATERMARK_EVENT event.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Push-pull graphs use MODULE_ID_SH_MEM_PULL_MODE for playback and
MODULE_ID_SH_MEM_PUSH_MODE for capture instead of the legacy WR/RD shared
memory endpoints. Detect these modules when opening the graph, cache their
instance ID in graph->shm_iid, and use them for media format setup.
Also add support for mapping the position buffer required by push-pull mode
and configuring the DSP with circular buffer and position buffer addresses.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shared memory module instance ID is now cached in graph->shm_iid when
the graph is opened. The old WR/RD shared memory IID helper functions are
no longer used.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return errors from audioreach_set_media_format() to ensure callers are
notified when media format setup fails.
This could hide failures while programming media format parameters for
individual modules and allow graph setup to continue with incomplete
configuration.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audioreach currently calls q6apm_graph_get_rx_shmem_module_iid() to get
the shared memory module IID.
The graph already caches this value in graph->shm_iid, so use it directly
in audioreach_compr_set_param() and audioreach_shared_memory_send_eos().
This prepares for removing the helper in a later patch.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528185806.6316-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_find_compatible_node() returns a referenced device node. The i.MX31
and i.MX35 early init paths use the node to map the CCM registers with
of_iomap(), but never drop the node reference.
Release the node after the mapping is created.
Fixes: 2cf98d1295 ("ARM: imx3: Retrieve the CCM base address from devicetree")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into char-misc-next
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add '#phy-cells' for usb-nop-xceiv to fix below check_dtbs warnings:
usbphy-2 (usb-nop-xceiv): '#phy-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add dvdd and avdd supply and regulators for panel sii,43wvf1g to fix below
check_dtbs warnings:
panel (sii,43wvf1g): 'dvdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add required proprety ti,deskew for ti,tfp410, which have not defined
default value in yaml. 0 is default value according to
drivers/gpu/drm/bridge/ti-tfp410.c.
Fix below check_dtbs warning:
dvi-encoder (ti,tfp410): 'ti,deskew' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lenovo Yoga Pro 7 15ASH11 with AMD RYZEN AI MAX+ 388 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260527102005.58528-1-xy-jackie@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maximum number of concurrent background work items (promotions,
demotions, writebacks) in the SMQ policy was hardcoded to 4096, with
a FIXME comment noting it should be made configurable.
This value was originally tuned down from 10240 to balance memory
overhead (~128 bytes per entry, ~512KB at 4096 entries) against I/O
parallelism. However, different workloads and cache sizes may benefit
from different limits:
- Write-heavy workloads may need more writeback concurrency
- Very large caches (10+ TB) may need more promotion slots
- Memory-constrained systems may want a lower limit
Make this configurable via the module parameter "smq_max_background_work"
(defaulting to 4096 to preserve existing behaviour). Clamp the value to
at least 1 to prevent setting 0, which would block all background work.
The parameter only affects newly created cache devices; existing caches
retain their value from creation time.
Signed-off-by: Cao Guanghui <caoguanghui@kylinos.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This includes more fixes to harden XDomain message handling against
possible malicious hosts.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=c9UC
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v7.1-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v7.1-rc7
This includes more fixes to harden XDomain message handling against
possible malicious hosts.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.1-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Limit XDomain response copy to actual frame size
thunderbolt: Validate XDomain request packet size before type cast
thunderbolt: Clamp XDomain response data copy to allocation size
thunderbolt: Bound root directory content to block size
thunderbolt: Reject zero-length property entries in validator
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260527100206.26788-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into usb-next
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d1f7b65f5 ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock.
Fixes: 2d1f7b65f5 ("dm cache policy smq: fix missing locks in invalidating cache blocks")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The new get-reqs dump operations added to sunrpc_cache.yaml and
nfsd.yaml place the "requests" nested attribute under dump.request.
A netlink dump carries an empty request; its payload travels back
in the reply. Because the spec names no reply attributes, the YNL
C code generator synthesizes a forward reference to a
<op>_rsp struct that is never defined, breaking any consumer of
these specs.
This first surfaced when Thorsten Leemhuis built tools/net/ynl
against -next:
nfsd-user.h:746: error: field 'obj' has incomplete type
struct nfsd_svc_export_get_reqs_rsp obj ...
nfsd-user.h:826: error: field 'obj' has incomplete type
struct nfsd_expkey_get_reqs_rsp obj ...
nfsd-user.c:1211: error: 'nfsd_svc_export_get_reqs_rsp_parse'
undeclared
sunrpc_cache.yaml has the same defect in ip-map-get-reqs and
unix-gid-get-reqs, but nfsd.yaml errors out first in the Makefile's
alphabetical build order and hides the sunrpc failures.
These bugs were introduced by incorrect merge conflict resolution.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-nfs/f6a3ca6d-e5cb-4a5c-9af2-8d2b1ce33ef0@leemhuis.info/
Fixes: 1045ccf519ce30 ("sunrpc: add netlink upcall for the auth.unix.ip cache")
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the nfsd export caches (svc_export and expkey)
without writing to /proc/net/rpc/*/flush.
An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is
omitted, all nfsd caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
