Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the sunrpc auth caches (ip_map and unix_gid) without
writing to /proc/net/rpc/*/flush.
An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is
omitted, all sunrpc caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the expkey (nfsd.fh) cache,
following the same pattern as the existing svc_export netlink support.
Add expkey to the cache-type enum, a new expkey attribute-set with
client, fsidtype, fsid, negative, expiry, and path fields, and the
expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec
and generated headers.
Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending
expkey cache requests and sends each entry's seqno, client name,
fsidtype, and fsid over netlink.
Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache
responses from userspace (client, fsidtype, fsid, expiry, and path
or negative flag) and updates the cache via svc_expkey_lookup() /
svc_expkey_update().
Wire up the expkey_notify() callback in svc_expkey_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_EXPKEY.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the svc_export (nfsd.export)
cache to Documentation/netlink/specs/nfsd.yaml and regenerate the
resulting files.
Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY
multicast event to the "exportd" group, carrying the cache type so
userspace knows which cache has pending requests.
Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots
pending svc_export cache requests and sends each entry's seqno,
client name, and path over netlink.
Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export
cache responses from userspace (client, path, expiry, flags, anon
uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative
flag) and updates the cache via svc_export_lookup() /
svc_export_update().
Wire up the svc_export_notify() callback in svc_export_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_SVC_EXPORT.
Note that the export-flags and xprtsec-mode enums are organized to match
their counterparts in include/uapi/linux/nfsd/export.h. The intent is
that future export options will only be added to the netlink headers,
which should eliminate the need to keep so much in sync.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid)
cache, using the sunrpc generic netlink family.
Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative,
expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs /
unix-gid-set-reqs operations to the sunrpc_cache YAML spec and
generated headers.
Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending
unix_gid cache requests and sends each entry's seqno and uid over
netlink.
Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid
cache responses from userspace (uid, expiry, gids as u32 multi-attr
or negative flag) and updates the cache via unix_gid_lookup() /
sunrpc_cache_update().
Wire up unix_gid_notify() callback in unix_gid_cache_template so
cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_UNIX_GID.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the ip_map (auth.unix.ip)
cache, using the sunrpc generic netlink family.
Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry),
ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations
to the sunrpc_cache YAML spec and generated headers.
Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending
ip_map cache requests and sends each entry's seqno, class name, and
IP address over netlink.
Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache
responses from userspace (class, addr, expiry, and domain name or
negative flag) and updates the cache via __ip_map_lookup() /
__ip_map_update().
Wire up ip_map_notify() callback in ip_map_cache_template so cache
misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_IP_MAP.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module,
so they cannot use the nfsd generic netlink family. Create a new
"sunrpc" generic netlink family with its own "exportd" multicast
group to support cache upcall notifications for sunrpc-resident
caches.
Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum
(ip_map, unix_gid), a cache-notify multicast event, and the
corresponding uapi header.
Implement sunrpc_cache_notify() in cache.c, which checks for
listeners on the exportd multicast group, builds and sends a
SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute.
Register/unregister the sunrpc_nl_family in init_sunrpc() and
cleanup_sunrpc().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add sunrpc_cache_requests_count() and sunrpc_cache_requests_snapshot()
to allow callers to count and snapshot the pending upcall request list
without exposing struct cache_request outside of cache.c.
Both functions skip entries that no longer have CACHE_PENDING set.
The snapshot function takes a cache_get() reference on each item so the
caller can safely use them after the queue_lock is released.
These will be used by the nfsd generic netlink dumpit handler for
svc_export upcall requests.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A later patch will be changing the kernel to send a netlink notification
when there is a pending cache_request. Add a new cache_notify operation
to struct cache_detail for this purpose.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rename cache_pipe_upcall() to cache_do_upcall() in anticipation of the
addition of a netlink-based upcall mechanism.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This function doesn't have anything to do with a timeout. The only
difference is that it warns if there are no listeners. Rename it to
sunrpc_cache_upcall_warn().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since it will soon also send an upcall via netlink, if configured.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When revoking delegation state, nfsd4_revoke_states() takes an extra
reference on the stid before calling unhash_delegation_locked(). If
unhash_delegation_locked() returns false (the delegation was already
unhashed by a concurrent path), dp is set to NULL and
revoke_delegation() is skipped, but the extra reference is never
released. Each occurrence permanently pins the stid in memory. The
leaked reference also prevents nfs4_put_stid() from decrementing
cl_admin_revoked, leaving the counter permanently inflated.
Drop the extra reference in the failure path.
Fixes: 8dd91e8d31 ("nfsd: fix race between laundromat and free_stateid")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_resource_released() calls svc_xprt_enqueue()
whenever XPT_DATA or XPT_DEFERRED is set. During RPC
processing, svc_reserve_auth() reduces the reservation
counter and triggers this path while the current thread
still holds XPT_BUSY. The enqueue enters svc_xprt_ready(),
executes an smp_rmb(), READ_ONCE(), and tracepoint, then
returns false on seeing XPT_BUSY.
Trace data from a 256KB NFSv3 WRITE workload over TCP
shows this pattern generates roughly 195,000 wasted
enqueue calls -- approximately one per RPC -- each
paying the full svc_xprt_ready() cost for no benefit.
Add a BUSY check alongside the existing DATA|DEFERRED
check in svc_xprt_resource_released(). When the
transport is BUSY, the holder will call
svc_xprt_received() upon completion, which already
checks for pending work flags and re-enqueues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_received() unconditionally calls
svc_xprt_enqueue() after clearing XPT_BUSY. When no
work flags are pending, the enqueue traverses
svc_xprt_ready() -- executing an smp_rmb(), READ_ONCE(),
and tracepoint -- before returning false.
Trace data from a 256KB NFSv3 workload over RDMA shows
85% of svc_xprt_received() invocations reach
svc_xprt_enqueue() with no pending work flags. In the
WRITE phase, 167,335 of 196,420 calls find no work; in
the READ phase, 97,165 of 98,276. Each unnecessary call
executes a memory barrier, a flags read, and (when
tracing is active) fires the svc_xprt_enqueue
tracepoint.
Add a flags pre-check between clear_bit(XPT_BUSY) and
svc_xprt_enqueue(). Both the clear and the subsequent
READ_ONCE operate on the same xpt_flags word, so
cache-line serialization of the atomic bitops ensures
the read observes any flag set by a concurrent producer
before the line was acquired for the clear. If a
producer's set_bit occurs after the clear_bit, that
producer's own svc_xprt_enqueue() call observes
!XPT_BUSY and dispatches the transport.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_reserve() and svc_xprt_release_slot() call
svc_xprt_enqueue() after modifying xpt_reserved or
xpt_nr_rqsts. The purpose is to re-dispatch the
transport when write-space or a slot becomes available.
However, when neither XPT_DATA nor XPT_DEFERRED is
set, no thread can make progress on the transport and
the enqueue accomplishes nothing.
Trace data from a 256KB NFSv3 WRITE workload over RDMA
shows 11.2 svc_xprt_enqueue() calls per RPC. Of these,
6.9 per RPC lack XPT_DATA and exit svc_xprt_ready()
immediately after executing the smp_rmb(), READ_ONCE(),
and tracepoint. svc_reserve() and svc_xprt_release_slot()
account for roughly five of these per RPC.
A new helper, svc_xprt_resource_released(), checks
XPT_DATA | XPT_DEFERRED before calling
svc_xprt_enqueue(). The existing smp_wmb() barriers
are upgraded to smp_mb() to ensure the flags check
observes a concurrent producer's set_bit(XPT_DATA).
Each producer (svc_rdma_wc_receive, etc.) both sets
XPT_DATA and calls svc_xprt_enqueue(), so even if the
check reads a stale value, the producer's own enqueue
provides a fallback path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
This series adds K3 SoC support for the SpacemiT I2S controller driver.
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible. The K3
SoC uses the same I2S IP as K1 but requires additional clocks
(sysclk_div, c_sysclk, c_bclk) that are shared across multiple I2S
controllers.
Patch 2 adds driver support for K3 SoC with additional clocks.
Link: https://patch.msgid.link/20260522-k3-i2s-v3-0-08e3eb811d93@linux.spacemit.com
Add support for the SpacemiT K3 SoC I2S controller, which shares the
same IP as K1 but requires additional clocks: sysclk_div, c_sysclk,
and c_bclk. These clocks only exist on K3 and are not present on K1.
The sysclk_div clock is present on most K3 I2S controllers except I2S1.
The c_sysclk and c_bclk clocks are shared across multiple I2S
controllers on K3.
Use devm_clk_get_optional_enabled() to acquire these clocks so that
the driver works on both K1 (where they are absent) and K3 without
needing SoC-specific match data. For K3, the sysclk_div rate is set
before sysclk in set_sysclk, and the common clock rates are configured
in hw_params based on the sample rate.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260522-k3-i2s-v3-2-08e3eb811d93@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the spacemit,k3-i2s compatible string for the K3 SoC I2S
controller. The K3 I2S IP is the same as K1 but requires additional
clocks: a dedicated sysclk_div clock, along with common_sysclk and
common_bclk which are shared across multiple I2S controllers on K3.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260522-k3-i2s-v3-1-08e3eb811d93@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware container allocations passed cont->size + sizeof(int) to
kzalloc(), which was wrong: the struct contains an int len followed by a
u8 data[] flexible array. It ended up being the same as the struct's
size is only the int member but still wrong.
Use the modern struct_size helper for this.
Add __counted_by for extra runtime analysis.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260523011749.101555-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Technologic Systems TS-4800 watchdog node was previously named 'wdt',
which violates the core watchdog.yaml schema expecting generic node names.
Rename the node to 'watchdog' to fix the following dtbs_check warning:
'wdt' does not match '^(pmic|timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Convert the Technologic Systems TS-4800 watchdog timer bindings
to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Cezary Rojewski <cezary.rojewski@intel.com> says:
Set of changes composed of one fix and two improvements.
The fix leads the series and addresses "unbalanced disables" coming from
the regulator core during S4 (hibernation) scenario.
The SLEEP_PM_OPS are unset for the driver. Hibernation (S4) causes no
resume (skipped thanks to smart_suspend=true) yet still performs the
suspend sequence unconditionally, see device_complete() in
drivers/base/power/main.c. In essence, we end up with double suspend
(double disable) and thus the warning. Exemplary stack:
unbalanced disables for regulator-dummy
WARNING: drivers/regulator/core.c:3244 at _regulator_disable+0x161/0x270, CPU#6: kworker/u64:2/120
(...)
Workqueue: pm pm_runtime_work
RIP: 0010:_regulator_disable+0x161/0x270
(...)
Call Trace:
<TASK>
regulator_bulk_disable+0xe4/0x220
? __pfx_regulator_bulk_disable+0x10/0x10
? pick_next_task_fair+0x36f/0x11f0
? __pfx_regmap_unlock_mutex+0x10/0x10
? regmap_unlock_mutex+0xe/0x20
pcm3168a_rt_suspend+0x57/0x90 [snd_soc_pcm3168a]
? __pfx_pcm3168a_rt_suspend+0x10/0x10 [snd_soc_pcm3168a]
__rpm_callback+0x69/0x200
? __pfx_pcm3168a_rt_suspend+0x10/0x10 [snd_soc_pcm3168a]
rpm_callback+0xbc/0xd0
rpm_suspend+0x225/0x960
? __pfx_rpm_suspend+0x10/0x10
? __kasan_check_write+0x14/0x20
? _raw_spin_lock_irq+0x8d/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? pwq_dec_nr_in_flight+0x63/0x4f0
pm_runtime_work+0xd0/0xf0
In regard to the improvements, both aim to drop redundant operations.
One targets pm_runtime_idle() - no need to fire it manually,
device-driver core will do that for us - while the second replaces
preprocessor directive with pm_runtime_status_suspended() check.
No !CONFIG_PM dependency equals better code coverege with default
kconfigs.
Link: https://patch.msgid.link/20260525201801.1336936-1-cezary.rojewski@intel.com
Revert changes done in commit 489db5d941 ("ASoC: pcm3168a:
Don't disable pcm3168a when CONFIG_PM defined") and add
pm_runtime_status_suspended() check.
The suspended-check addresses regulator's "unbalanced disables"
warning during driver removal even when CONFIG_PM is enabled.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260525201801.1336936-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Device-driver core runs pm_request_idle() right after the probing
sequence already, see __driver_probe_device().
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260525201801.1336936-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SLEEP_PM_OPS are unset for the driver. Hibernation (S4) causes no
resume (skipped thanks to smart_suspend=true) yet still performs the
suspend sequence unconditionally, see device_complete() in
drivers/base/power/main.c.
If S4 runs for already suspended pcm3168a device, we end up with
"unbalanced disables" warning from the regulators. Assigning the
operations fixes the problem.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260525201801.1336936-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace BUG_ON(!mutex_is_locked(&event_mutex)) with
lockdep_assert_held(&event_mutex) in uprobe_buffer_enable() and
uprobe_buffer_disable().
BUG_ON() will crash the kernel. mutex_is_locked() only checks
if any task holds lock,but not the caller task. lockdep_assert_held()
also check current task for lock and no crash on true condition.
Link: https://lore.kernel.org/all/20260521192846.8306-1-yashsuthar983@gmail.com/
Signed-off-by: Yash Suthar <yashsuthar983@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Store probe entry fetch instructions in the probe_entry_arg
allocation instead of allocating a separate instruction array.
This keeps the entry fetch code tied to the entry argument lifetime while
leaving regular probe_arg instruction arrays separately allocated and
freed.
Assisted-by: Codex:GPT-5.5
Link: https://lore.kernel.org/all/20260520215817.16560-1-rosenp@gmail.com/
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
John Madieu <john.madieu.xa@bp.renesas.com> says:
Add audio support for the Renesas RZ/G3E SoC to the R-Car Sound
driver. The RZ/G3E audio subsystem is based on R-Car Sound IP but
has several differences requiring dedicated handling:
- SSI operates exclusively in BUSIF mode (no PIO)
- 2-4 BUSIF channels per SSI (layout differs from R-Car)
- Separate register regions for SCU, ADG, SSIU, SSI accessed by name
- Per-SSI ADG and SSIF supply clocks
- Dedicated audmapp clock/reset for Audio DMAC peri-peri
- Per-SSI and per-module reset controllers via CPG
- Unprefixed DT sub-node names (ssi, ssiu, src, ...) instead of
rcar_sound,xxx
- Hyphenated indexed clock/reset names (ssi-0, src-0, adg-ssi-0,
audio-clka, ...) instead of the legacy dotted form
Link: https://patch.msgid.link/20260525110230.4014435-1-john.madieu.xa@bp.renesas.com
Add system suspend/resume support for the ASoC rsnd driver, required
for RZ/G3E platforms. Distribute the per-module suspend/resume work
across the relevant files (adg.c, ssi.c, ssiu.c, src.c, ctu.c, mix.c,
dvc.c, dma.c) rather than centralising it in core.c.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-19-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/G3E device tree binding uses standard unprefixed node names
("ssi", "ssiu", "src", "dvc", "mix", "ctu") instead of the legacy
"rcar_sound," prefixed names used by R-Car bindings.
Convert rsnd_parse_of_node() from a macro into a function that tries
the legacy prefixed name first, then falls back to the unprefixed name
by stripping the "rcar_sound," prefix. This makes the driver work
transparently with both old and new bindings.
While at it, update the related comments in dma.c, ssi.c and ssiu.c
that reference the hardcoded "rcar_sound,ssiu" / "rcar_sound,ssi"
names to note that the driver now accepts both the prefixed and the
unprefixed forms.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-18-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/G3E SoC exposes a shared SCU reset controller used by all SRC
modules. Acquire it once and pass it through per-instance's
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
devm_reset_control_get_optional_shared() returns NULL when no reset
is described in DT, leaving existing R-Car generations unaffected.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-17-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/G3E SoC requires explicit SCU (Sampling Rate Converter Unit)
clock management:
- scu: SCU top-level module clock (CPG_CLKON_15.CLK6_ON)
- scu_x2: SCU top-level double-rate clock (CPG_CLKON_15.CLK7_ON)
- scu_supply: SCU register-access / housekeeping clock
(CPG_CLKON_23.CLK14_ON)
Without every one of them enabled, no SCU register is reachable.
Hold these in a new struct rsnd_src_ctrl and acquire them with
devm_clk_get_optional_enabled(). scu_supply is intentionally left
untouched by the system suspend/resume path added later in the
series, so SCU registers stay reachable across PM transitions.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-16-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The R-Car Sound ADG block has up to four external master-clock inputs
named CLKA, CLKB, CLKC and CLKI by the silicon. On Gen2 R-Car these
come from DT under the legacy names "clk_a", "clk_b", "clk_c", "clk_i"
defined by renesas,rsnd.yaml. Gen4 collapses them to a single "clkin".
The new standalone RZ/G3E sound binding (renesas,r9a09g047-sound.yaml)
uses the standard DT naming convention with a vendor-meaningful prefix
that matches the SoC datasheet pin labels: "audio-clka", "audio-clkb",
"audio-clkc", "audio-clki".
Add a third clkin name table for RZ/G3E and dispatch to it from
rsnd_adg_get_clkin() in the same style as the existing Gen4 branch.
The CLKA/B/C/I enum values, the clkin[] array, and the BRGA/BRGB
derivation are unchanged - only the DT lookup names differ.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-15-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RZ/G3E's ADG module requires explicit clock management for SSI audio
interfaces that differs from R-Car Gen2/Gen3/Gen4:
- Per-SSI ADG clocks (adg-ssi-N, or adg.ssi.N in legacy bindings)
for each SSI module
- A shared SSIF supply clock for the SSI subsystem
These clocks are acquired using optional APIs, making them transparent
to platforms that do not require them.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-14-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RZ/G3E requires the ADG reset line to be deasserted for the audio
subsystem to operate. The ADG module clock is already managed via
rsnd_adg_clk_enable/disable() through adg->adg, so no additional
clock handling is needed.
Add support for the optional "adg" reset control on Renesas RZ/G3E SoC.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-13-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Acquire the per-SSI reset controller and pass it through
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
The RZ/G3E SoC exposes one reset line per SSI instance. Use the
indexed-name rsnd_devm_reset_control_get_optional_indexed() helper
so the same code accepts both the hyphenated RZ/G3E names
("ssi-0", "ssi-1", ...) and the legacy dotted names used by R-Car
("ssi.0", ...).
The helper returns NULL when no reset is described in DT, leaving
existing R-Car generations unaffected.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-12-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the SSIU found on the Renesas RZ/G3E SoC, which
provides a different BUSIF layout compared to earlier generations:
- SSI0-SSI4: 4 BUSIF instances each (BUSIF0-3)
- SSI5-SSI8: 1 BUSIF instance each (BUSIF0 only)
- SSI9: 4 BUSIF instances (BUSIF0-3)
- Total: 28 BUSIFs
The RZ/G3E also has only two pairs of BUSIF error-status registers
instead of four, and the SSI always operates in BUSIF mode: the
SSI_MODE0 BUSIF/PIO select bit is not implemented and must not be written.
While at it, add RSND_SSIU_BUSIF_STATUS_COUNT_2 as a capability flag in
the match data, consumed via struct rsnd_ssiu_ctrl, to parametrise the two
BUSIF error-status loops.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-11-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/G3E SoC exposes a single shared "ssi-all" reset that gates all
SSI/SSIU modules. Acquire it at SSIU probe and pass it through
rsnd_mod_init() so it is wired into the rsnd_mod->rstc plumbing.
devm_reset_control_get_optional_shared() returns NULL when no reset is
described in DT, leaving existing R-Car generations unaffected.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-10-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RZ/G3E has different DMA register base addresses and offset
calculations compared to R-Car platforms.
Add dedicated rsnd_rzg3e_dma_addr() function with dispatch from
rsnd_dma_addr(), following the existing per-generation pattern.
The function reuses rsnd_dma_addr_lookup() and rsnd_dma_addr_map.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-9-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the raw multi-dimensional array used for DMA address lookup in
rsnd_gen2_dma_addr() with properly named structs: rsnd_dma_addr (in/out
pair), rsnd_dma_addr_dir (capture/playback arrays), and
rsnd_dma_addr_map (src/ssi/ssiu module sets).
While at it, extract the common lookup logic (is_ssi / use_src / use_cmd
evaluation and table indexing) into a shared rsnd_dma_addr_lookup()
function.
No functional change. This is a preparatory refactor for upcoming RZ/G3E
support which will add its own DMA address map using the same struct and
lookup function.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-8-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RZ/G3E requires additional audmapp clock and reset lines for
Audio DMA-PP operation.
Add global audmapp clock/reset management in rsnd_dma_probe()
using optional APIs to remain transparent to other platforms.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-7-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RZ/G3E audio subsystem has a different register layout compared to
R-Car Gen2/Gen3/Gen4, as described below:
- Different base address organization (SCU, ADG, SSIU, SSI as
separate regions accessed by name)
- Additional registers: AUDIO_CLK_SEL3, SSI_MODE3, SSI_CONTROL2
- Different register offsets within each region
Add RZ/G3E SoC's audio subsystem register layouts and probe support.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-6-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rsnd driver historically looks up per-instance clocks and resets
using dot-separated names matching the ones declared in R-Car device
tree bindings ("ssi.0", "src.0", "adg.ssi.0", ...). The dot separator
is unusual for device tree clock-names / reset-names and newer
Renesas SoC bindings (RZ/G3E and later) use the more standard hyphen
form ("ssi-0", "src-0", ...).
Rather than force every existing R-Car user to rename their DT entries,
add a small set of helpers that try the hyphen form first and fall
back to the dot form. While at it, convert the existing indexed
devm_clk_get() call sites in the SSI, SRC, CTU, DVC and MIX probes to use
the new helpers and drop the now unused per-module name buffers and
NAME_SIZE defines.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RZ/G3E SoC requires per-module reset control for the audio subsystem.
Add reset controller support to struct rsnd_mod and update rsnd_mod_init()
to accept and handle a reset_control parameter and mirror it in
rsnd_mod_quit().
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RSND_SOC_MASK was defined as (0xFF << 4), spanning bits 4-11. This is
wider than needed since only nibble B (bits 7:4) is used for SoC
identifiers. Narrow it to (0xF << 4) to match the intended single-nibble
allocation and prevent overlap with bits 8-11 which will be used by
upcoming RZ series flags.
No functional change, since the only current user (RSND_SOC_E) fits
within a single nibble.
Fixes: ba164a49f8 ("ASoC: rsnd: src: Avoid a potential deadlock")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a standalone device tree binding for the Renesas RZ/G3E (R9A09G047)
sound controller.
The RZ/G3E sound IP is based on R-Car Sound but differs in several ways:
- Uses unprefixed sub-node names (ssi, ssiu, src, dvc, mix, ctu) instead
of R-Car's rcar_sound,xxx prefixed names.
- Supports up to 5 DMA controllers per direction, allowing multiple DMA
entries with repeated channel names in SSIU, SRC and DVC sub-nodes.
- Has 47 clocks including per-SSI ADG clocks (adg-ssi-[0-9]), SCU clocks
(scu, scu_x2, scu_supply), SSIF supply clock, AUDMAC peri-peri clock,
and ADG clock.
- Has 14 reset lines including SCU, ADG and AUDMAC peri-peri resets.
- SSI operates exclusively in BUSIF mode.
These differences make the RZ/G3E binding incompatible with the existing
renesas,rsnd.yaml, so it is added as a separate standalone binding with
its own $ref to dai-common.yaml.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
