Add support to configure counter SELect regs. In some cases the reg
writes need to happen while the GPU is idle. And for a7xx+, in some
cases SEL regs need to be configured from BV or BR aperture. The
easiest way to deal with this is to configure from the RB.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728215/
Message-ID: <20260526145137.160554-12-robin.clark@oss.qualcomm.com>
Add the basic infrastructure for tracking assigned perfcntrs.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728212/
Message-ID: <20260526145137.160554-11-robin.clark@oss.qualcomm.com>
The upcoming PERFCNTR_CONFIG ioctl will allow for both global counter
collection, and per-context counter reservation for local (ie. within
a single GEM_SUBMIT ioctl) counter collection.
Any number of contexts can reserve the same counters, but we will need
to ensure that counters reserved for local counter collection do not
conflict with counters used for global counter collection.
So add tracking for per-context local counter reservations.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728211/
Message-ID: <20260526145137.160554-10-robin.clark@oss.qualcomm.com>
It's a common pattern, needing to insert a yield packet before flushing
the rb. And we'll need this once again for configuring perfcntr SEL
regs. So add a helper.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728208/
Message-ID: <20260526145137.160554-9-robin.clark@oss.qualcomm.com>
Currently the sysprof param serves two functions, (a) disabling perfcntr
clearing on context switch/preemption, and (b) disabling IFPC. In the
future, with kernel side global perfcntr collection/stream, the decision
about disabling IFPC will change.
To prepare for this, split out two helpers/accessors for the two
different cases. For now, they are the same thing, but this will
change.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728214/
Message-ID: <20260526145137.160554-8-robin.clark@oss.qualcomm.com>
Wire up the generated perfcntr tables for a6xx+. The PERFCNTR_CONFIG
ioctl will use this information to assign counters.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728213/
Message-ID: <20260526145137.160554-7-robin.clark@oss.qualcomm.com>
Pull in perfcntr json and wire up generation of perfcntr tables.
Sync from mesa commit a573e25b6dcd ("freedreno/registers: Gen8 perfcntr
fixes")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728204/
Message-ID: <20260526145137.160554-6-robin.clark@oss.qualcomm.com>
Update gen_header.py to bring in support for generating perfcntr tables.
Sync from mesa commit 96c5179c02d1 ("freedreno/registers: Skip deprecated
warns for kernel")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728203/
Message-ID: <20260526145137.160554-5-robin.clark@oss.qualcomm.com>
Most of the churn is just reworking the usage attribute on the mesa
side.
Sync from mesa commit ff41a00fab89 ("freedreno/registers: Correct
register name")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728202/
Message-ID: <20260526145137.160554-4-robin.clark@oss.qualcomm.com>
Use perfmon_capable() which checks both CAP_SYS_ADMIN and CAP_PERFMON.
This matches what i915 and xe do, and seems more appropriate.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728198/
Message-ID: <20260526145137.160554-3-robin.clark@oss.qualcomm.com>
Outside of a3xx, this was never really used. And it low-key gets in the
way of the new perfcntr support (or at least it is confusing to have two
things called "perf"). So lets remove it.
This drops the "perf" debugfs file. But these days, nvtop is a better
option. (Plus perfetto for newer gens.)
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728200/
Message-ID: <20260526145137.160554-2-robin.clark@oss.qualcomm.com>
Adreno X2-185 GPU found in Glymur chipsets belongs to the A8x family.
It features a new slice architecture with 4 slices, significantly higher
bandwidth throughput compared to mobile counterparts, raytracing support,
and the highest GPU Fmax seen so far on an Adreno GPU (1850 Mhz), among
other improvements. Update the dt bindings documentation to describe this
GPU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727119/
Message-ID: <20260522-glymur-gpu-dt-v5-2-562c406b210c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In A8xx, the RSCC block is part of GPU's register space. Update the
virtual base address of rscc to point to the correct address.
Fixes: 50e8a557d8 ("drm/msm/a8xx: Add support for A8x GMU")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727117/
Message-ID: <20260522-glymur-gpu-dt-v5-1-562c406b210c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In A8x GPUs, the GX GDSC is moved to a separate block called GXCLKCTL
which is under the GX power domain. Due to the way the support for this
block is implemented in its driver, pm_runtime votes result in a vote on
GX/GMxC/MxC rails from the APPS RSC. This is against the Adreno
architecture which require GMU to be the sole voter of these collapsible
rails on behalf of GPU, except during the GPU/GMU recovery.
To align with this architectural requirement and to realize the power
benefits of the IFPC feature, remove the GXPD votes during gmu resume
and suspend. And during the recovery sequence, enable/disable the GXPD
along with the 'synced_poweroff' genpd hint to force collapse this GDSC.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/720979/
Message-ID: <20260427-gfx-clk-fixes-v2-6-797e54b3d464@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Similar to a6xx_recover(), check the GX power domain status before
accessing mmio in GX domain a8xx_recover().
Fixes: 288a932008 ("drm/msm/adreno: Introduce A8x GPU Support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/720977/
Message-ID: <20260427-gfx-clk-fixes-v2-5-797e54b3d464@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Sashiko reported an inconsistent use of NULL vs ERR_PTR()
returns in the stub helpers in xynos-acpm-protocol.h.
Since this only happens on dead code for COMPILE_TEST=y, this is not
really a bug though. Having stub functions that return NULL is a common
way to define optional interfaces, where callers still work when the
feature is disabled, though this clearly does not work for acpm because
some callers have a NULL pointer dereference when compile testing.
Since CONFIG_EXYNOS_ACPM_PROTOCOL already supports compile-testing itself,
and all (both) drivers using it clearly require the support, so this
just simplifies the option space without losing any build coverage.
Remove the stub functions entirely and adjust the one Kconfig
dependency to require EXYNOS_ACPM_PROTOCOL unconditionally.
Fixes: 6837c006d4 ("firmware: exynos-acpm: add empty method to allow compile test")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org
Link: https://lore.kernel.org/all/a7994860-24a3-4f87-84bf-109ed653dda4@linaro.org/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260529134454.2147446-1-arnd@kernel.org
[krzk: Rebase on difference in devm_acpm_get_by_node()]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce devm_acpm_get_by_phandle() to standardize how consumer
drivers acquire a handle to the ACPM IPC interface. Enforce the
use of the "samsung,acpm-ipc" property name across the SoC and
simplify the boilerplate code in client drivers.
The first consumer of this helper is the Exynos ACPM Thermal Management
Unit (TMU) driver. The TMU utilizes a hybrid management approach: direct
register access from the Application Processor (AP) is restricted to the
interrupt pending (INTPEND) registers for event identification.
High-level functional tasks, such as sensor initialization, threshold
programming, and temperature reads, are delegated to the ACPM firmware
via this IPC interface.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-6-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Thermal Management Unit (TMU) on the Google GS101 SoC is managed
through a hybrid model shared between the kernel and the Alive Clock
and Power Manager (ACPM) firmware.
Add the protocol helpers required to communicate with the ACPM for
thermal operations, including initialization, threshold configuration,
temperature reading, and system suspend/resume handshakes.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-5-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Replace the embedded `struct acpm_ops` inside `struct acpm_handle` with
a pointer to a `const struct acpm_ops`.
Previously, the operations structure was embedded directly within the
handle and populated dynamically at runtime via `acpm_setup_ops()`.
This resulted in mutable function pointers and unnecessary per-instance
memory overhead.
By defining `exynos_acpm_driver_ops` statically as a `const` structure,
the function pointers are now safely housed in the read-only `.rodata`
section. This improves security by preventing function pointer
overwrites, saves memory, and slightly reduces initialization overhead
in `acpm_probe()`.
Consequently, update all consumer drivers (clk, mfd) to access the
operations via the new pointer indirection (`->ops->`). Finally, fix
the previously empty kernel-doc description for the ops member to
reflect its new pointer nature.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-4-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Rename the `n_cmd` member of `struct acpm_rx_data` to `cmdcnt` to
maintain consistent nomenclature across the driver (aligning with
`txcnt`, `rxcnt`, and transfer helpers).
With the member renamed, annotate the dynamically allocated `cmd`
pointer with the `__counted_by_ptr(cmdcnt)` macro to improve runtime
bounds checking.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-2-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Both the DVFS and PMIC ACPM sub-drivers implement similar local helper
functions (acpm_dvfs_set_xfer and acpm_pmic_set_xfer) to initialize the
acpm_xfer structure before sending an IPC message.
Move this logic into a single centralized helper, acpm_set_xfer(),
in the core ACPM driver to reduce boilerplate, eliminate code
duplication, and prepare for the upcoming ACPM TMU helper sub-driver
which will also utilize this method.
Note that there is no change in underlying functionality. While the old
acpm_pmic_set_xfer() unconditionally assigned the RX buffer parameters
(xfer->rxd and xfer->rxcnt), the new unified helper introduces a
'response' boolean. All updated PMIC call sites now explicitly pass
'true' for this argument. This ensures the unified helper takes the
'if (response)' branch, performing the exact same assignments and
preserving the original PMIC behavior.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-1-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The ring_size field in struct dw_mci is misleadingly named.
Despite its name, it does not represent the size of the descriptor
ring buffer in bytes, but rather the number of descriptors allocated
within the fixed-size ring buffer.
The actual ring buffer size is fixed at PAGE_SIZE (or DESC_RING_BUF_SZ,
which equals PAGE_SIZE). Within this buffer, we allocate either
struct idmac_desc or struct idmac_desc_64addr descriptors, and
ring_size stores the count of these descriptors.
This naming has caused confusion, as it's also used to set
mmc->max_segs (the maximum number of scatter-gather segments),
which logically corresponds to the number of descriptors, not a
size in bytes.
No functional change is introduced by this naming-only patch.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
This is the only Qcom binding that doesn't have 'qcom' prefix in the
bindings name. This doesn't match with the regex in MAINTAINERS file and
the 'get_maintainer.pl' script fails to list the 'linux-arm-msm' list:
Ulf Hansson <ulfh@kernel.org> (maintainer:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...)
Rob Herring <robh@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Krzysztof Kozlowski <krzk+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Conor Dooley <conor+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Bjorn Andersson <andersson@kernel.org> (in file)
Konrad Dybcio <konradybcio@kernel.org> (in file)
linux-mmc@vger.kernel.org (open list:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...)
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
linux-kernel@vger.kernel.org (open list)
Hence, rename the binding to include 'qcom' prefix so that the regex
matches correctly.
Reported-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/20260526151003.p4kn2vek3hpv4gzv@hu-mojha-hyd.qualcomm.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
I met one suspend/resume issue with sdr104 capable sdio wifi card (with
"keep-power-in-suspend" set in DT property):
After resuming from suspend to ram, the sdio wifi card stops working.
Further debug shows that although ios shows the sdio card is at sdr104
mode, the voltage is still at 3V3. This is due to missing the calling
of ->start_signal_voltage_switch() in sdhci_resume_host().
Fix this issue by adding ->start_signal_voltage_switch() in
sdhci_resume_host(). This also matches what we do for
sdhci_runtime_resume_host().
Then the question is: why this issue hasn't reported and fixed for so
long time. IMHO, several reasons: Some host controllers just kick off
the runtime resume for system resume, so they benefit from the well
supported runtime pm code; Some platforms just use the old sdio wifi
card which doesn't need signal voltage switch at all, the default
voltage is 3v3 after resuming.
Fixes: 6308d2905b ("mmc: sdhci: add quirk for keeping card power during suspend")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The really old controllers (rk2928, rk3066, rk3188) do not support UHS
speeds at all, and thus never handled phase data.
For that reason it never had a parse_dt callback and no driver private
data at all.
Commit ff6f0286c8 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating
support") makes the private data sort of mandatory, because the init
function checks whether phases are configured internally or through the
clock controller.
This results in the old SoCs then experiencing NULL-pointer dereferences
when they try to access that private-data struct.
While we could have if (priv) conditionals in all places, it's way less
cluttery to just give the old types their private-data struct.
Fixes: ff6f0286c8 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Replace common pattern of dev_err() + return with dev_err_probe() in
probe functions and their callees. This macro provides standardized
error message format with symbolic error names and adds deferred probe
debugging information.
The conversion makes the code more compact and ensures consistent error
logging across all initialization paths.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The clk_disable_unprepare() function has internal protection against
ERR_PTR and NULL pointers (IS_ERR_OR_NULL). Remove the redundant
IS_ERR() check for bus_clk in dwcmshc_suspend() and in the error
path of dwcmshc_resume() to simplify the code.
Note that the clk_prepare_enable() call in dwcmshc_resume() must retain
its IS_ERR() check because clk_prepare() only handles NULL pointers,
not ERR_PTR.
No functional change intended.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge updates that introduce devm_acpi_install_notify_handler()
and convert some drivers for core ACPI devices previously using
acpi_dev_install_notify_handler() to devres-based resource
management.
* acpi-driver-devm:
ACPI: video: Switch over to devres-based resource management
ACPI: video: Use devm for video->entry and backlight cleanup
ACPI: video: Use devm action for freeing video devices
ACPI: video: Use devm action for video bus object cleanup
ACPI: video: Rearrange probe and remove code
ACPI: video: Reduce the number of auxiliary device dereferences
ACPI: PAD: Switch over to devres-based resource management
ACPI: PAD: Fix teardown ordering in acpi_pad_remove()
ACPI: PAD: Pass struct device pointer to acpi_pad_notify()
ACPI: PAD: Rearrange acpi_pad_notify()
ACPI: thermal: Switch over to devres-based resource management
ACPI: HED: Switch over to devres-based resource management
ACPI: HED: Refine guarding against adding a second instance
ACPI: battery: Switch over to devres-based resource management
ACPI: AC: Switch over to devres-based resource management
ACPI: NFIT: core: Use devm_acpi_install_notify_handler()
ACPI: bus: Introduce devm_acpi_install_notify_handler()
The litex_mmc driver assumes the card is already probed in the BIOS
and skip the phy initialization. This will cause the command fail
like the following when the old card is unplugged and then insert
a new card:
[ 62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110
[ 62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
Add required clock settings and initialization for the CMD 0, so it can
probe the new card.
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The previous clock uses roundup_pow_of_two() to calculate the core
clock frequency. It does not meet the actual hardware meaning.
The actual frequency is calculated by "ref_clk / ((div >> 1) << 1)".
Fix the clock divider calculation.
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The above SoCs have a weird register layout for the mailbox registers.
So, encapsulate register offset calculation in a per-SoC callback. Other
than that, only a separate config struct and compatibles are needed.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260519075620.4128-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The above SoCs have only 12 mailboxes and do not have an extra register
space for mailboxes. Everything is contained in the common register
set. In addition to adding these SoCs, the other entries get updated to
enforce 2 register spaces and their specific number of interrupts.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260519075620.4128-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tegra410 and Tegra241 deprecate the HIDREV register. The recommended
method is to use ARM SMCCC to retrieve the chip ID, major and minor
revisions, and platform information.
Prefer ARM SMCCC when the platform supports it; fall back to HIDREV
otherwise. Behavior on older Tegra SoCs that do not support ARM SMCCC
remains unchanged.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
IMU calibration matrix used in the device tree is inverted when testing on
the device which results in wrong screen orientation. Invert it to match
the matrix dumped from the device.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drop dedicated backlight regulator since the GPIO used in it is actually
SFIO controlling backlight and setting it as GPIO causes backlight to
freeze at maximum level.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All ASUS Transformers have micro-HDMI connector directly available. After
Tegra HDMI got bridge/connector support, we should use connector framework
for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add front camera video path. Aptina MI1040 camera is used on all supported
ASUS Transformers, but only TF201 and TF700T will work since on
TF300T/TG/TL front camera is linked through an additional ISP.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Lower the CPU thermal limit for the LG P880, since its chassis has less
thermal dissipation capability than the P895.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
LG X3 devices have the PMIC's RTC module located at a non-standard
address. Set the correct address.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add front and rear camera nodes and interlink them with Tegra CSI and VI.
Adjust camera PMIC voltages to better fit requirements and fix the focuser
node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These use a separate SMMU instance compared to everything else currently
enabled for the SoC.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
