The RZ/G2E (R8A774C0) SoC was previously handled via the generic
"renesas,rcar-gen3-sdhi" fallback compatible string. However, because
the SDHI IP on RZ/G2E is identical with the R-Car E3 (R8A77990), it
requires the specific quirks and configuration defined in
`of_r8a77990_compatible` rather than the generic Gen3 data.
Add the explicit "renesas,sdhi-r8a774c0" match entry to map it correctly.
Note that the DT binding file renesas,sdhi.yaml does not need an update
as the entry for this SoC is already present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The RZ/G2N (R8A774B1) SoC was previously handled via the generic
"renesas,rcar-gen3-sdhi" fallback compatible string. However, because
the SDHI IP on RZ/G2N is identical with the R-Car M3-N (R8A77965), it
requires the specific quirks and configuration defined in
`of_r8a77965_compatible` rather than the generic Gen3 data.
Add the explicit "renesas,sdhi-r8a774b1" match entry to map it correctly.
Note that the DT binding file renesas,sdhi.yaml does not need an update
as the entry for this SoC is already present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
This reverts commit ebea268ea5.
Mmu is now being enabled for the display controllers.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Merge the mmc fixes for v7.1-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The RZ/G2H (R8A774E1) SoC was previously handled via the generic
"renesas,rcar-gen3-sdhi" fallback compatible string. However, because
the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it
requires the specific quirks and configuration defined in
`of_r8a7795_compatible` rather than the generic Gen3 data.
Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly.
Note that the DT binding file renesas,sdhi.yaml does not need an update
as the entry for this SoC is already present.
Fixes: 3194134288 ("arm64: dts: renesas: r8a774e1: Add SDHI nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Document the compatible string for the SDHCI controller on the
Eliza platform.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
mmc_add_host() makes the host visible to the MMC core. Register the
interrupt handlers and advertise MMC_CAP_SDIO_IRQ before that, so the
core cannot start using the host before IRQ handling is set up.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The EIC7700 code in sdhci-of-dwcmshc uses host->mmc->caps2 to select
different configuration paths for different card types. The current logic
distinguishes eMMC and SD, but does not handle SDIO separately.
Update the EIC7700 card-type checks so that eMMC, SD and SDIO are
distinguished explicitly.
Switch the reset path to dwcmshc_reset() so that pending interrupt state
is cleared consistently, and use sdhci_enable_clk() so the clock enable
sequence follows the standard SDHCI flow.
Fixes: 32b2633219 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Sashiko identified a possible infinite loop [1].
ACPM IPC sequence numbers are tracked via a 64-bit bitmap. Previously,
acpm_prepare_xfer() used a do...while loop to search for a free
sequence number.
If all 63 available sequence numbers are leaked due to transient
hardware timeouts or mailbox failures, the bitmap becomes full.
The next call to acpm_prepare_xfer() would enter an infinite loop.
Fix this by utilizing the kernel's optimized bitmap search functions
(find_next_zero_bit / find_first_zero_bit). If the pool is completely
exhausted, log the failure and return -EBUSY to allow the kernel to
fail gracefully instead of hanging.
Furthermore, drop the allocation loop entirely. Because
acpm_prepare_xfer() is strictly called under the 'tx_lock' mutex,
sequence number allocations are perfectly serialized. If
find_next_zero_bit() locates a free bit, a single
test_and_set_bit_lock() is mathematically guaranteed to succeed.
To enforce this locking invariant, wrap the allocation in a
WARN_ON_ONCE. If the atomic set fails, it indicates the driver's
mutex serialization is fundamentally broken. The warning generates a
stack trace for debugging, while returning -EIO immediately aborts the
transfer to prevent silent payload corruption.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-7-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko identified memory ordering races in [1].
The ACPM driver uses a globally shared 'bitmap_seqnum' to track
available sequence numbers. Even though threads now strictly free their
own sequence numbers, the allocation and freeing of these bits across
concurrent threads are effectively lockless operations and require
explicit LKMM memory barriers.
Previously, the driver used plain bitwise operators (test_bit, set_bit,
clear_bit), which lack ordering guarantees. This creates two race
conditions on weakly ordered architectures like ARM64:
1. Polling Release Violation: The polling thread copies its payload and
calls clear_bit(). Without a release barrier, the CPU can reorder
the memory operations, making the cleared bit globally visible
before the payload reads have fully completed.
2. TX Acquire Violation: The TX thread loops on test_bit(), calls
set_bit(), and then wipes the payload buffer via memset(). Without
an acquire barrier, the CPU can speculatively execute the memset()
before the bit is safely and formally claimed.
If these reorderings overlap, a new TX thread can claim the sequence
number and overwrite the buffer while the original polling thread is
still actively reading from it.
Fix this by upgrading the bitwise operators. Wrap the TX allocation in
test_and_set_bit_lock() to establish formal LKMM Acquire semantics, and
pair it with clear_bit_unlock() in the polling path to enforce Release
semantics.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260423-acpm-fixes-sashiko-reports-v1-0-2217b790925e%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-6-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sashiko identified severe races in the polling state machine [1].
In the ACPM driver's polling mode, threads waited for responses by
monitoring the globally shared 'bitmap_seqnum'. This caused false
timeouts because if a thread processed its response and freed the
sequence number, a concurrent TX thread could immediately reallocate
it before the polling thread woke up.
Additionally, the driver suffered from a cross-thread Use-After-Free
(UAF) preemption race. Previously, acpm_get_rx() cleared the sequence
number of whichever RX message it drained from the hardware queue. This
meant Thread A could globally free Thread B's sequence slot while
Thread B was asleep. A new Thread C could then steal the slot,
overwrite the buffer, and leave Thread B to wake up to corrupted state
or a timeout.
Fix this by rewriting the polling state machine:
1. Decouple polling from the global allocator by introducing a per-slot
'completed' flag, synchronized via smp_store_release() and
smp_load_acquire().
2. Strip acpm_get_saved_rx() out of acpm_get_rx() to make it a pure
queue-draining function. Introduce a 'native_match' boolean argument
which evaluates to true only if the thread natively processed its
own sequence number during the call. This explicitly informs the
polling loop whether it must retrieve its payload from the
cross-thread cache.
3. Centralize the cache fallback and sequence number free (clear_bit)
inside the polling loop. Crucially, the free operation now strictly
targets the thread's own TX sequence number (xfer->txd[0]), rather
than the drained RX sequence number. This enforces strict ownership:
a thread only ever frees its own allocated sequence slot, and only
at the exact moment it completes its poll, eliminating the UAF
window.
Furthermore, explicitly guard the 'native_match' assignment with an
if (rx_seqnum == tx_seqnum) check, even for zero-length (no payload)
responses. While an unguarded assignment wouldn't crash (because the
cache fallback acpm_get_saved_rx() safely returns early on zero-length
transfers) doing so would "lie" to the state machine. If a thread
drained the queue and found another thread's zero-length message,
setting native_match = true would falsely convince the polling loop
that it natively handled its own response. Maintaining a rigorous state
machine requires that native_match is only set when a thread explicitly
processes its own sequence number.
Cc: stable@vger.kernel.org
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260429-acpm-fixes-sashiko-reports-v3-0-47cf74ab09ad%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-5-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
After commit 3392291fc5 ("drm/msm: Fix shrinker deadlock"), all
supported versions of clang warn (or error with CONFIG_WERROR=y):
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
105 | purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
117 | evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
2 errors generated.
With older but supported versions of GCC, this is an unconditional hard error:
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'purge':
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:35: error: parameter name omitted
purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'evict':
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:35: error: parameter name omitted
evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
Restore the parameter name to clear up the warnings, renaming it
"unused" to make it clear it is only needed to satisfy the prototype of
drm_gem_lru_scan().
Cc: stable@vger.kernel.org
Fixes: 3392291fc5 ("drm/msm: Fix shrinker deadlock")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/725924/
Link: https://lore.kernel.org/r/20260518-drm-msm-fix-c23-extensions-v1-1-0833559418c7@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Currently the driver only updates the EDID when it detects a connected
monitor, which results in the connector still listing outdated modes
even after the display is unplugged. Set connector's EDID to NULL on
unplug to clear the list of modes.
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727619/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-10-cf3ab488dd7b@oss.qualcomm.com
Tracking when the DP link is ready isn't that useful from the driver
point of view. It doesn't provide a direct information if the device
should be suspended, etc. Replace it with the 'plugged' boolean, which
is set when the driver knows that there is DPRX plugged.
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727614/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-9-cf3ab488dd7b@oss.qualcomm.com
Handling of the HPD events in the MSM DP driver is plagued with lots of
problems. It tries to work aside of the main DRM framework, handling the
HPD signals on its own. There are two separate paths, one for the HPD
signals coming from the DP HPD pin and another path for signals coming
from outside (e.g. from the Type-C AltMode). It lies about the connected
state, returning the link established state instead. It is not easy to
understand or modify it. Having a separate event machine doesn't add
extra clarity.
Drop the whole event machine. When the DP receives a HPD event, send it
to the DRM core. Then handle the events in the hpd_notify callback,
unifying paths for HPD signals.
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727616/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-7-cf3ab488dd7b@oss.qualcomm.com
With EV_USER_NOTIFICATION gone event's data is no longer useful. Drop
it, removing also the argument from event handlers.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727610/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-6-cf3ab488dd7b@oss.qualcomm.com
Currently, we queue an event for signalling HPD connect/disconnect. This
can mean a delay in plug/unplug handling and notifying DRM core when a
hotplug happens.
Drop EV_USER_NOTIFICATION and signal the IRQ event as part of hotplug
handling.
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727607/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-5-cf3ab488dd7b@oss.qualcomm.com
Currently, the DP link training is being done during HPD. Move
link training to atomic_enable() in accordance with the atomic_enable()
documentation.
Link disabling is already done in atomic_post_disable() (as part of the
dp_ctrl_off_link_stream() helper).
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727606/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-4-cf3ab488dd7b@oss.qualcomm.com
Instead of relying on the link_ready flag to specify if DP is connected,
read the DPCD bits and get the sink count to accurately detect if DP is
connected.
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727603/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-3-cf3ab488dd7b@oss.qualcomm.com
The ISR_HPD_* enum should represent values that can be read from the
REG_DP_DP_HPD_INT_STATUS register. Swap ISR_HPD_IO_GLITCH_COUNT and
ISR_HPD_REPLUG_COUNT to map them correctly to register values.
While we are at it, correct the spelling for ISR_HPD_REPLUG_COUNT.
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727602/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-2-cf3ab488dd7b@oss.qualcomm.com
The HPD state status is the 3 most significant bits, not 4 bits of the
HPD_INT_STATUS register.
Fix the bit shift macro so that the correct bits are returned in
msm_dp_aux_is_link_connected().
Fixes: 19e52bcb27 ("drm/msm/dp: return correct connection status after suspend")
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Tested-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com> # Hamoa IOT EVK, QCS8300 Ride
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727611/
Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-1-cf3ab488dd7b@oss.qualcomm.com
Document the Shikra-specific SDHCI compatible in the sdhci-msm binding.
Use "qcom,sdhci-msm-v5" as the fallback compatible for the MSM SDHCI v5
controller used on Shikra.
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add device tree overlay for the Radxa Camera 4K (featuring the Sony IMX415
image sensor) to applied on the Radxa ROCK 5B+ CAM1 port.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20260522-rk3588-vicap-v5-7-d1d1f5265c56@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree overlay for the Radxa Camera 4K (featuring the Sony IMX415
image sensor) to applied on the Radxa ROCK 5B+ CAM0 port.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20260522-rk3588-vicap-v5-6-d1d1f5265c56@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the device tree node for the RK3588 Video Capture (VICAP) unit.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
[converted reg values in vicap ports to hexadecimal, to have them align
with the port@X values, and be less confusing]
Link: https://patch.msgid.link/20260522-rk3588-vicap-v5-5-d1d1f5265c56@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
People have gone to the trouble of writing this kernel-doc; the
least we can do is publish it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@linux.dev>
Link: https://patch.msgid.link/20260528175905.1102280-3-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a simple helper which replaces page_folio(bvec->bv_page).
Minor improvement in readability, but the real motivation is to reduce
the number of references to bvec->bv_page so that it can be changed
with less work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@linux.dev>
Link: https://patch.msgid.link/20260528175905.1102280-2-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 937f3e6b51.
The change to format propagation in the BRx broke configuration of the
DRM pipeline. Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Closes: https://lore.kernel.org/linux-media/CA+V-a8t481xuwava0nb7uY9CUPqFWZ_8EP0xrK3BgumP7HDcLg@mail.gmail.com
Fixes: 937f3e6b51 ("media: renesas: vsp1: brx: Fix format propagation")
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/T2H
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260506215650.1897177-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This reverts commit 133ac42af0.
The change to format initialization, along with the change to format
propagation in the BRx in commit 937f3e6b51 ("media: renesas: vsp1:
brx: Fix format propagation"), broke configuration of the DRM pipeline.
Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
Fixes: 133ac42af0 ("media: renesas: vsp1: Initialize format on all pads")
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/T2H
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260506215650.1897177-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
update_tg_load_avg() is called once per leaf cfs_rq from the
__update_blocked_fair() walk that runs inside the NOHZ idle-balance
softirq, and again from update_load_avg() with UPDATE_TG. Its first
operation after the trivial early-outs is unconditionally:
now = sched_clock_cpu(cpu_of(rq_of(cfs_rq)));
if (now - cfs_rq->last_update_tg_load_avg < NSEC_PER_MSEC)
return;
Jakub ran into a system where nohz_idle_balance() was taking 75%
of a CPU (which is handling network traffic and doing many irq_exit_cpu
calls), with 35% of that CPU spent in update_load_avg, and 17% of the
CPU in sched_clock_cpu(), reading the TSC.
In a quick synthetic test, it looks like this patch reduces the
CPU use of sched_balance_update_blocked_averages by about 20%.
Switch the rate-limit to read rq_clock(rq_of(cfs_rq)) instead.
This eliminates the rdtsc, and uses a fairly fresh timestamp,
because all callers of update_tg_load_avg() and clear_tg_load_avg()
hold rq->lock and have called update_rq_clock(rq) within microseconds:
caller pre-state
__update_blocked_fair encloser did update_rq_clock(rq)
update_load_avg's three UPDATE_TG sites under rq->lock after enqueue/dequeue/update_curr
attach_/detach_entity_cfs_rq preceded by update_load_avg(...)
clear_tg_load_avg via offline path rq_clock_start_loop_update(rq) upfront
so rq->clock is fresh at every call. Since cfs_rqs are per-CPU
per-task_group, cfs_rq->last_update_tg_load_avg is always compared
against the same rq's clock; no cross-rq drift.
Signed-off-by: Rik van Riel <riel@surriel.com>
Assisted-by: Claude (Anthropic)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260527110250.6a91718d@fangorn
Extend the total_bw selftest to validate the fair/ext dl_server
auto-attach/detach operations.
After the existing consistency checks, the test now doubles the
fair_server's runtime on every CPU via debugfs and verifies that:
1. total_bw grew after the customization (proves fair_server was
attached and apply_params() honored the dl_bw_attached flag),
2. with the minimal BPF scheduler loaded, total_bw drops back to the
baseline value (proves fair_server was detached and ext_server was
attached at its own default runtime),
3. after unload total_bw matches the doubled value from step 1 (proves
fair_server was re-attached with the runtime customization preserved
across the load/unload cycle).
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260526164420.638711-3-arighi@nvidia.com
Commit cd959a3562 ("sched_ext: Add a DL server for sched_ext tasks")
introduced an ext_server deadline server to protect sched_ext tasks from
fair/RT starvation, mirroring the existing fair_server.
Currently, both servers reserve their 50ms/1000ms bandwidth at boot,
regardless of whether a BPF scheduler is loaded. Unused bandwidth is
still reclaimed at runtime by other classes, but the static reservation
prevents the RT class from implicitly using that headroom when one of
the two classes is guaranteed to be empty.
A sysadmin can work around this by writing
/sys/kernel/debug/sched/{fair,ext}_server/cpu*/runtime, but that
requires manual action and not all systems expose debugfs.
A better approach is to make server bandwidth reservations dynamic: only
the scheduling policy that is currently active should register its
reservation, while the inactive one should not artificially hold
capacity (keeping both reservations only when the BPF scheduler is
running in partial mode):
+---------------------------------------------+-------------+------------+
| BPF scheduler state | fair server | ext server |
+---------------------------------------------+-------------+------------+
| not loaded (default boot) | reserved | none |
| loaded full mode (!SCX_OPS_SWITCH_PARTIAL) | none | reserved |
| loaded partial mode (SCX_OPS_SWITCH_PARTIAL)| reserved | reserved |
+---------------------------------------------+-------------+------------+
To achieve this, introduce an "attached/detached" state for each
deadline server, so the kernel can decide whether a server's bandwidth
should be accounted in global bandwidth tracking.
At boot, the system starts with only the fair server contributing to
bandwidth accounting. When a BPF scheduler is enabled, the ext server is
attached and may replace or complement the fair server depending on
whether full or partial mode is used. When sched_ext is disabled, the
system restores the previous deadline bandwidth values and behavior.
The transition logic ensures that switching between scheduling modes is
consistent and reversible, without losing runtime configuration or
requiring manual intervention.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260526164420.638711-2-arighi@nvidia.com
Writing runtime or period via the per-CPU dl_server debugfs files
(/sys/kernel/debug/sched/{fair,ext}_server/cpu*/{runtime,period}) on an
offline CPU can trigger two distinct kernel issues:
1) Divide-by-zero in dl_server_apply_params():
Oops: divide error: 0000 [#1] SMP NOPTI
RIP: 0010:dl_server_apply_params+0x239/0x3a0
Call Trace:
sched_server_write_common.isra.0+0x21a/0x3c0
full_proxy_write+0x78/0xd0
vfs_write+0xe7/0x6e0
Both __dl_sub() and __dl_add() divide by cpus internally, which can be
0 once the CPU has been removed from any active root-domain span (this
has been latent since the debugfs interface was introduced).
2) WARN_ON_ONCE in dl_server_start():
WARNING: kernel/sched/deadline.c:1805 at dl_server_start+0x232/0x270
Commit ee6e44dfe6 ("sched/deadline: Stop dl_server before CPU goes
offline") added this check to catch enqueueing the server on an
offline rq.
There's no meaningful semantics for re-configuring the per-CPU dl_server
bandwidth while the CPU is offline, so simply reject the write with
-EBUSY so userspace gets a clear error.
Closes: https://lore.kernel.org/all/20260526092228.3B6891F00A3A@smtp.kernel.org/
Fixes: d741f297bc ("sched/fair: Fair server interface")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: abaci-kreproducer <abaci@linux.alibaba.com>
Link: https://patch.msgid.link/20260526100502.575774-1-arighi@nvidia.com
Venkat Reported a boot kernel panic next-20260522. Git bisect pointed to
b5ea300a17 ("sched/cache: Make LLC id continuous")
Stacktrace points to llc_mask being null.
NIP [c000000000e58504] _find_first_bit+0x44/0x130
LR [c000000000e58500] _find_first_bit+0x40/0x130
Call Trace:
build_sched_domains+0xad8/0xe50
sched_init_smp+0xa8/0x164
kernel_init_freeable+0x250/0x370
ret_from_kernel_user_thread+0x14/0x1c
On powerpc, cpu_coregroup_mask is available only when the underlying
hardware support coregroup. In shared LPAR, QEMU guest or power9 etc
coregroup isn't supported. In such cases llc_mask was being referenced
when it was null leading to panic.
On powerpc, LLC is at SMT core level. So assumption that coregroup(MC)
domain point to LLC is wrong. Provide a way for archs to say where its
LLC is if it not at MC domain.
Fixes: b5ea300a17 ("sched/cache: Make LLC id continuous")
Closes: https://lore.kernel.org/all/51154de7-3700-4cb4-82f2-1b3a8fa427f7@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Co-developed-by: Chen, Yu C <yu.c.chen@intel.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20260529075712.1181039-1-sshegde@linux.ibm.com
slab->partial is assigned by get_obj("partial") and then immediately
overwritten by get_obj_and_str("partial", &t). Remove the first
redundant assignment.
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Link: https://patch.msgid.link/20260518062159.80664-4-wangxuewen@kylinos.cn
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
The assignment `x = NULL` sets the local parameter variable instead of
`*x`, which is a no-op since `*x` was already set to NULL on the line
above. Remove the dead assignment.
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Link: https://patch.msgid.link/20260518062159.80664-3-wangxuewen@kylinos.cn
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
The disable trace path in slab_debug() had a logic error where it would
set trace=1 instead of trace=0. This made trace functionality permanently
enabled once turned on for any slab cache.
Fixes: a87615b8f9 ("SLUB: slabinfo upgrade")
Cc: stable@vger.kernel.org
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
WARNING: From:/Signed-off-by: email address mismatch: 'From: wangxuewen <18810879172@163.com>' != 'Signed-off-by: wangxuewen <wangxuewen@kylinos.cn>'
Link: https://patch.msgid.link/20260518062159.80664-2-wangxuewen@kylinos.cn
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Make sure the maintainers and reviewers are CC'd on changes to the
scripts and tools that depend on slab internals.
Link: https://patch.msgid.link/20260525-maint-slab-tools-v1-1-d66b69f1412a@kernel.org
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Initializing compile time constant struct or arrays from another such
variable is a gcc extension, while clang strictly requires a compile time
constant literal.
As reported by LKP:
>> drivers/gpu/drm/scheduler/tests/tests_scheduler.c:675:10: error: initializer element is not a compile-time constant
drm_sched_scheduler_two_clients_attr),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/kunit/test.h:224:13: note: expanded from macro 'KUNIT_CASE_PARAM_ATTR'
.attr = attributes, .module_name = KBUILD_MODNAME}
^~~~~~~~~~
1 error generated.
vim +675 drivers/gpu/drm/scheduler/tests/tests_scheduler.c
671
672 static struct kunit_case drm_sched_scheduler_two_clients_tests[] = {
673 KUNIT_CASE_PARAM_ATTR(drm_sched_scheduler_two_clients_test,
674 drm_sched_scheduler_two_clients_gen_params,
> 675 drm_sched_scheduler_two_clients_attr),
676 {}
677 };
678
Fix it by using a compound literal as other tests do.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605220312.Pu7UO05u-lkp@intel.com/
Fixes: 97ef806a53 ("drm/sched: Add some scheduling quality unit tests")
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260522090129.9385-1-tvrtko.ursulin@igalia.com
The etb10 miscdevice uses drvdata->reading as a shared exclusivity gate
for userspace buffer access. etb_open() claims that gate with
local_cmpxchg(), and etb_release() clears it with local_set().
That gate is shared per-device state rather than CPU-local state. A
running system can reach it whenever /dev/<etb> is opened, closed, and
reopened by different tasks while the device remains registered, so the
same drvdata->reading variable may be claimed on one CPU and later
cleared on another.
This code used to use atomic_t for the same gate, but commit
27b10da8ff ("coresight: etb10: moving to local atomic operations")
changed it to local_t even though the access pattern remained cross-task
and cross-CPU. Restore atomic_t together with atomic_cmpxchg() and
atomic_set() so the exclusivity gate again uses a primitive intended
for shared state.
The issue was found on Linux v6.18.21 by our static analysis tool while
scanning surviving local_t-on-shared-state sites, and then manually
reviewed against the live etb10 file-op path.
It was runtime-validated with a reproducible QEMU no-device KCSAN PoC
that kept the same report-local contract:
1. use one shared struct etb_drvdata carrier and its
drvdata->reading gate;
2. call etb_open() and etb_release() sequentially on that gate to
confirm the original claim/clear path;
3. bind the open side to CPU0 and the release side to CPU1 for the
same gate to show cross-CPU ownership;
4. run bound workers that repeatedly race etb_open() and
etb_release() on the same gate until KCSAN reports a target hit.
The harness recorded:
L1 passed open=1 release=1
reading_after_open=1 reading_after_release=0
L2 passed open_cpu=0 release_cpu=1
cross_cpu_release=1 reading_after=0 open_ret=0
Representative KCSAN excerpt from the no-device validation run:
BUG: KCSAN: data-race in etb_open.constprop.0.isra.0 [vuln_msv]
write to 0xffffffffc0003810 of 4 bytes by task 216 on cpu 1:
etb_open.constprop.0.isra.0+0x38/0x80 [vuln_msv]
l3_worker_thread_fn+0x4f/0xf0 [vuln_msv]
kthread+0x17e/0x1c0
ret_from_fork+0x22/0x30
read to 0xffffffffc0003810 of 4 bytes by task 215 on cpu 0:
etb_open.constprop.0.isra.0+0x18/0x80 [vuln_msv]
l3_worker_thread_fn+0x4f/0xf0 [vuln_msv]
kthread+0x17e/0x1c0
ret_from_fork+0x22/0x30
value changed: 0x00000000 -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 215 Comm: etb10_l3_a Tainted: G O 6.1.66 #2
This no-device harness is not a real ETB10 hardware end-to-end run, but
it preserves the same shared drvdata->reading gate and the same
etb_open()/etb_release() claim/clear contract. No real ETB10 hardware
was available for runtime testing.
Build-tested with:
make olddefconfig
make -j"$(nproc)" drivers/hwtracing/coresight/coresight-etb10.o
Fixes: 27b10da8ff ("coresight: etb10: moving to local atomic operations")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260528165201.319452-1-runyu.xiao@seu.edu.cn
Processes can write to the last page of a file using mmap, and when the file
size is not a multiple of the page size, this can be used to write beyond the
end of the file. This is sometimes referred to as page poisoning, and it is
not a problem in itself because the data beyond eof will be ignored. However,
we currently fail to clear out any space beyond the end of the file that we
skip over when the file size is increased, so that "poison" can end up getting
exposed. Fix that.
Fixes xfstest generic/363.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The mode argument of fallocate_chunk() became unused in commit
1885867b84 ("GFS2: Update i_size properly on fallocate"), so remove it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
Fixes: b3d29a8230 ("KVM: arm64: nv: Handle ZCR_EL2 traps")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260529-kvm-arm64-fix-zcr-len-nv-v2-1-86cad51992bd@kernel.org
[maz: rewrote commit message, tidy up access_zcr_el2()]
Signed-off-by: Marc Zyngier <maz@kernel.org>
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion().
Fixes: 132d44dc69 ("iio: adc: ad_sigma_delta: Check for previous ready signals")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and
disable_one() were called from the out: block while keep_cs_asserted
was still true. This caused any SPI transfer issued by those callbacks
to carry cs_change=1, leaving CS permanently asserted after the
conversion. Fix by moving both calls into the out_unlock: block, after
keep_cs_asserted is cleared, matching the pattern already used in
ad_sd_calibrate().
In the error path of ad_sd_buffer_postenable(), if an operation fails
after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g.
spi_offload_trigger_enable()), the device is left in continuous
conversion mode with CS physically asserted. Additionally,
bus_locked remaining true after spi_bus_unlock() causes subsequent
SPI operations to call spi_sync_locked() without the bus lock actually
held, allowing concurrent SPI access.
Fix the error path by clearing keep_cs_asserted first, then calling
set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS,
then clearing bus_locked before releasing the bus.
For devices that implement neither set_mode nor disable_one (such as
MAX11205, which has no physical CS pin), no SPI transfer is issued
during cleanup and the cs_change flag has no effect on any physical
line.
Fixes: 132d44dc69 ("iio: adc: ad_sigma_delta: Check for previous ready signals")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This reverts commit 2982e599ff.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Several functions in namei.c take an "int *type" parameter, such as
filename_parentat(). To know what values this can take you have to find
the anonymous struct that defines the LAST_XXX values. Define an enum
last_type to make this type explicit.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260528175854.57626-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The only user of LAST_XXX outside of fs/namei.c is fs/smb/server/vfs.c;
ksmbd_vfs_path_lookup() calls vfs_path_parent_lookup() and expects a
LAST_NORM last type (or it will be ENOENT). ksmbd_vfs_rename() also calls
vfs_path_parent_lookup() but forgets the LAST_NORM check.
It does not really make sense to have vfs_path_parent_lookup() expose
the last_type because it is only needed to ensure it is LAST_NORM. So
let's do this check in vfs_path_parent_lookup() instead and keep the
LAST_XXX internal to fs/namei.c. This changes the ENOENT errno in
ksmbd_vfs_path_lookup() to EINVAL, which matches better with how this is
handled by callers of filename_parentat().
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260528175854.57626-1-jkoolstra@xs4all.nl
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
RTLA tests are not documented anywhere. Mention both runtime and unit
tests in the README, with instructions on how to run them and a list of
dependencies and required system configuration.
Link: https://lore.kernel.org/r/20260514073038.204428-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
