The test asserted that the X86_FEATURE_SEV CPUID bit exactly matches
whether KVM offers KVM_X86_SEV_VM. That is not an invariant: when all
SEV ASIDs are assigned to SEV-SNP, KVM does not offer the SEV VM type
even though CPUID reports SEV, so the test aborts on an SNP-only host.
Derive SEV availability from KVM_CAP_VM_TYPES (as already done for SEV-ES
and SNP), assert only the one-way implication that a type offered by KVM
is also reported in CPUID, and TEST_REQUIRE() the SEV VM type so the test
skips cleanly when it is unavailable.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <5d3c345113748f39b7982e365d241abaf3e11086.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sev_smoke_test ran the plain SEV subtest unconditionally, gated only on
the X86_FEATURE_SEV CPUID bit, while gating SEV-ES and SNP on the
KVM_CAP_VM_TYPES bits. CPUID reporting SEV does not mean KVM offers the
SEV VM type: when all SEV ASIDs are assigned to SEV-SNP, KVM_X86_SEV_VM
is unavailable even though X86_FEATURE_SEV is set. On such a host the
test aborts in KVM_CREATE_VM instead of exercising the available modes.
Gate the SEV subtest on KVM_CAP_VM_TYPES like the others, so the test
runs the VM types the host actually offers.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <2b5e7a83d277134294199a455469bb436196b902.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_destroy_caches() destroys pte_list_desc_cache and
mmu_page_header_cache, but leaves both pointers unchanged. The pointers
live in kvm.ko, and therefore survive when a vendor module is unloaded
while kvm.ko remains loaded.
If creation of pte_list_desc_cache fails during a subsequent vendor
module load, its assignment sets pte_list_desc_cache to NULL and the
error path calls mmu_destroy_caches(). mmu_page_header_cache still
points to the cache destroyed during the preceding vendor module
unload. Passing that stale pointer to kmem_cache_destroy() causes a
slab use-after-free.
Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y,
CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A
one-shot test hook forces pte_list_desc_cache to NULL on the second
invocation of kvm_mmu_vendor_module_init():
1. Load kvm.ko and kvm-intel.ko, creating both caches.
2. Unload only kvm_intel, leaving kvm.ko loaded.
3. Reload kvm_intel and force initialization through the -ENOMEM path.
KASAN reports:
BUG: KASAN: slab-use-after-free in
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
kmem_cache_destroy+0x21/0x1d0
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
Allocated by task 16817:
__kmem_cache_create_args+0x12c/0x3b0
__kmem_cache_create.constprop.0+0xb6/0xf0 [kvm]
kvm_mmu_vendor_module_init+0x13b/0x170 [kvm]
...
Freed by task 16820:
kmem_cache_destroy+0x117/0x1d0
kvm_mmu_vendor_module_exit+0x21/0x30 [kvm]
Clear both pointers immediately after destroying their caches so that
the stored state reflects the caches' lifetime and repeated cleanup is
safe.
With the fix applied, the same injected vendor module reload fails with
-ENOMEM as expected and produces no KASAN report.
Fixes: cb498ea2ce ("KVM: Portability: Combine kvm_init and kvm_init_x86")
Cc: stable@vger.kernel.org
Signed-off-by: Phil Rosenthal <phil@phil.gs>
Message-ID: <20260718-kvm-mmu-cache-uaf-v3-1-e103b93c74e1@phil.gs>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_zap_oldest_mmu_pages() excludes a shadow page whose root_count
is non-zero from top-level reclaim, because such a page cannot be
freed. The path in mmu_page_zap_pte() that recursively zaps a parentless
nested TDP child has no such check. As a result, a shadow page can
be zapped even if the page itself can't be freed; as the comment in
kvm_mmu_zap_oldest_mmu_pages() notes, zapping it will just force vCPUs
to rebuild the page.
As in top-level reclaim, do not recursively prepare zapping of a
nested TDP child whose root_count is non-zero.
Fixes: 2de4085ccc ("KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.
Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acb, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.
Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Fixes: f95eec9bed ("KVM: x86/mmu: Don't put invalid SPs back on the list of active pages")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
free_nested() frees the shadow VMCS while vmcs01 still points to it. But
because it is asynchronous with respect to loaded_vmcs_clear(), the vCPU
might migrate before the pointer is cleared and __loaded_vmcs_clear()
may then execute VMCLEAR.
The VMCS needs to stay attached until its explicit VMCLEAR completes, but
then it can be hidden and the page safely freed.
Fixes: 355f4fb140 ("kvm: nVMX: VMCLEAR an active shadow VMCS after last use")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern.
Fixes: c52918744e ("net: airoha: npu: Move memory allocation in airoha_npu_send_msg() caller")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178351055214.98729.11403147818632027428@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object.
Fixes: 7194792308 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260708111738.750391-1-lgs201920130244@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts.
Fixes: 6dd333c894 ("KVM: arm64: GICv3: nv: Plug L1 LR sync into deactivation primitive")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-arm-kernel/20260710222128.416581-1-scott@os.amperecomputing.com/
Link: https://patch.msgid.link/20260714231158.496808-1-scott@os.amperecomputing.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
airoha_ppe_deinit() replaces the NPU pointer with NULL via
rcu_replace_pointer() but does not wait for existing RCU readers
to exit before calling ppe_deinit() and airoha_npu_put(). This can
cause a use-after-free if a reader in an RCU read-side critical
section still holds a reference to the NPU when it is freed.
The init path (airoha_ppe_init) already calls synchronize_rcu()
after rcu_assign_pointer(), but the deinit path introduced in
commit 6abcf751bc ("net: airoha: Fix schedule while atomic in
airoha_ppe_deinit()") omitted the matching barrier when switching
from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer().
Add synchronize_rcu() before ppe_deinit() to ensure all existing
RCU readers have completed before the NPU resources are released.
Fixes: 6abcf751bc ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178351022574.97989.6880403520276841703@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object.
Fixes: 84cba72956 ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708111025.749311-1-lgs201920130244@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefano Garzarella says:
====================
vsock/virtio: collapse receive queue under memory pressure
This series contains a patch (the first one) that is part of work I'm
doing to improve the tracking of memory used by AF_VSOCK sockets.
The second patch is a test for our suite that highlights the issue.
Since Brien reported an issue with his environment (based on Linux 6.12.y)
related to the work I’m doing, I extracted this patch and tried to make it
as easy as possible to backport. Brien tested it by backporting it to
6.12.y, which now contains the backport of the 059b7dbd20
("vsock/virtio: fix potential unbounded skb queue").
This patch primarily fixes STREAM sockets, but also partially fixes
SEQPACKET (with the exception of EOMs, which are kept in separate skbs to
avoid overcomplicating the code).
The rest of the work, I feel, is more net-next material and still needs
some work to be completed.
v1: https://lore.kernel.org/netdev/20260626134823.206676-1-sgarzare@redhat.com/
====================
Link: https://patch.msgid.link/20260708102904.50732-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that sends 2 MB of data using randomly sized small packets
(129-512 bytes) over a SOCK_STREAM connection. Packets above
GOOD_COPY_LEN (128) bypass the in-place coalescing in recv_enqueue(),
forcing each one into its own skb.
Without receive queue collapsing, the per-skb overhead eventually
exceeds buf_alloc and the connection is reset. The test verifies
that all data arrives and that content integrity is preserved.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260708102904.50732-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When many small packets accumulate in the receive queue, the skb overhead
can exceed buf_alloc even while the payload is within bounds. This causes
virtio_transport_inc_rx_pkt() to reject packets, leading to connection
resets during large transfers under backpressure.
The issue was reported by Brien, who has a reproducer, but it is also
easily reproducible with iperf-vsock [1] using a small packet size:
iperf3 --vsock -c $CID -l 129
which fails immediately without this patch but with commit 059b7dbd20
("vsock/virtio: fix potential unbounded skb queue").
Inspired by TCP's tcp_collapse() which solves a similar problem, add
virtio_transport_collapse_rx_queue() that walks the receive queue and
re-copies data into compact linear skbs to reduce the overhead.
The collapse is triggered proactively from when the number of skb queued
is close to exceeding the overhead budget.
A pre-scan counts the eligible bytes to size each allocation precisely,
avoiding waste for isolated small packets. Partially consumed skbs are
kept as-is to preserve buf_used/fwd_cnt accounting, EOM-marked skbs to
maintain SEQPACKET message boundaries, and skbs already larger than the
collapse target because they already have a good data-to-overhead ratio.
Walking a large queue may take a significant amount of time and cache
misses, causing traffic burstiness. To limit this, the collapse stops
once enough room is freed for this packet and the next one, but may
opportunistically free more to fill each collapsed skb to capacity.
[1] https://github.com/stefano-garzarella/iperf-vsock
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Reported-by: Brien Oberstein <brienpub@gmail.com>
Closes: https://lore.kernel.org/netdev/618701dd023e$063de350$12b9a9f0$@gmail.com/
Tested-by: Brien Oberstein <brienpub@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260708102904.50732-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does.
Fixes: 5800b1cf3f ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708093534.53486-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ntfs_non_resident_attr_shrink() shrinks attribute sizes but fails to
trim the page cache. This leaves orphaned dirty folios beyond the new
end of the attribute, leading to writeback failures (-ENOENT), data
loss, and $EA chain corruption.
Fix this by truncating the page cache to the new size immediately after
updating the sizes, preventing writeback from flushing out-of-range folios.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Add a shared helper to safely convert runlist element counts to byte sizes
using overflow checks, and use it in both ntfs_rl_realloc() and
ntfs_rl_realloc_nofail().
Fixes: 11ccc9107d ("ntfs: update runlist handling and cluster allocator")
Co-developed-by: Alper Mudar <kommandant_alper@proton.me>
Signed-off-by: Alper Mudar <kommandant_alper@proton.me>
Tested-by: Alper Mudar <kommandant_alper@proton.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Sparse does not know __builtin_infer_alloc_token() and complains:
sparse: sparse: undefined identifier '__builtin_infer_alloc_token'
Fix it by using a dummy variant of __kmalloc_token() if __CHECKER__ is
defined.
Fixes: feb662d916 ("slab: support for compiler-assisted type-based slab cache partitioning")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607110912.nZTqfCrH-lkp@intel.com/
Signed-off-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260721092005.1986693-1-elver@google.com
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
GTPv1-U packets may carry a chain of extension headers before the inner
IP packet. The receive path already parses and skips these extension
headers, but it currently reads the inner protocol before doing so.
As a result, the first extension header byte is interpreted as the inner
IP version. Packets with extension headers are then dropped before PDP
lookup.
Parse the extension header chain before calling gtp_inner_proto(), so the
inner protocol is read from the actual inner IP header.
Fixes: c75fc0b9e5 ("gtp: identify tunnel via GTP device + GTP version + TEID + family")
Signed-off-by: Zhixing Chen <running910@gmail.com>
Link: https://patch.msgid.link/20260708042244.120898-1-running910@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison.
Fixes: c809195f55 ("rds: clean up loopback rds_connections on netns deletion")
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Tested-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260708024314.601139-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery.
Fixes: bf11485f84 ("net/mlx5: Register mlx5e priv to devcom in MPV mode")
Assisted-by: Codex:gpt-5
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707233911.3651139-1-manjunath.b.patil@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb
length in OVS_CB(skb)->cutlen. When a later userspace action segments a
GSO skb, queue_gso_packets() reuses that delta for each smaller segment.
A segment can then reach queue_userspace_packet() with cutlen greater
than skb->len, underflowing the length passed to skb_zerocopy().
Store the maximum preserved length instead and bound each consumer
against the current skb length. Use U32_MAX as the no-truncation
sentinel so the value remains valid if skb geometry changes before a
consumer handles it.
Fixes: f2a4d086ed ("openvswitch: Add packet truncation support.")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.5
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260707221635.27489-1-kylebot@openai.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
REG_FE_GDM_MIB_CLEAR after every read creates a race window where
packets arriving between read and clear are lost from statistics.
Switch to a delta-based approach instead:
- 64-bit H+L registers (ok pkts/bytes, E64..L1023): read absolute
hardware total directly into a local variable; clamp with max(new, old)
to prevent torn-read regression when the counter carries between the
two reads.
- 32-bit registers (drops, bc, mc, errors, runt, long): accumulate
(u32)(curr - prev) into a 64-bit software counter; unsigned
subtraction handles wrap-around transparently.
- tx/rx_len[0] ([0,64] bucket): combines RUNT_CNT (32-bit, delta via
tx_runt/rx_runt) and E64_CNT (64-bit, absolute) into a single local
accumulator; max(new, old) applied here too to guard against a torn
read of E64 when the RUNT accumulator is unchanged between polls.
MIB counters are zeroed by the SCU FE reset (EN7581_FE_RST) asserted
in airoha_hw_init() at module load, so no explicit MIB clear is needed
in airoha_fe_init().
Merge airoha_dev_get_hw_stats() into airoha_update_hw_stats() and
move stats_lock inside. Plain spin_lock() is correct: the function
is only called from ndo_get_stats64() in process context. Each dev
refreshes only its own MIB counters; sibling devs on a shared GDM3/4
port are polled when their own netdev is queried.
Fixes: 8f4695fb67 ("net: airoha: better handle MIBs for GDM ports with multiple devs attached")
Signed-off-by: Aniket Negi <aniket.negi03@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260707152639.105628-1-aniket.negi03@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drm_gpusvm_scan_mm() asks HMM to report the current CPU page-table
state without faulting missing entries by leaving default_flags set to
zero. The HMM PFN array is still caller-owned input/output state, and
the framework may preserve input bits while filling entries. It is not
safe for the caller to hand HMM an uninitialized array and then treat
entries without HMM_PFN_VALID as an authoritative unpopulated result.
Use kvcalloc() for the temporary PFN array so entries that are not
reported as valid start from the documented zero state. This prevents
random stack or heap contents from being interpreted as HMM PFN flags or
PFN values during the scan.
Fixes: f1d08a5864 ("drm/gpusvm: Introduce a function to scan the current migration state")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/178406967042.1113483.2116704310277917086.stgit@skinsburskii
If kvmalloc_array() fails in drm_gpusvm_range_evict(), the MM
reference acquired earlier is not released, resulting in a reference
leak.
Fix this by dropping the MM reference on the kvmalloc_array()
failure path.
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260714170025.3487974-1-matthew.brost@intel.com
af_iucv queues not-yet-received message notifications on iucv->message_q,
each holding a raw pointer to the connection's iucv_path. When the peer
severs the connection, iucv_sever_path() frees that path with
iucv_path_free() but leaves the notifications queued. A later recvmsg()
drains message_q via iucv_process_message_q() and hands the stale path to
message_receive() -- a use-after-free of the freed iucv_path.
Drop the queued notifications when the path is severed; once the path is
gone they can no longer be received. This also frees the notifications
leaked when a socket is closed with messages still queued.
Fixes: f0703c80e5 ("[AF_IUCV]: postpone receival of iucv-packets")
Closes: https://sashiko.dev/#/patchset/20260705-b4-disp-fc79c0dc-v1-1-d2cdcb57afa9@proton.me?part=1
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260707-b4-disp-783fedbb-v1-1-463b9dbda2ea@proton.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
converted the bio-list membership checks from sector pointers to
physical addresses. The two conversions in rmw_assemble_write_bios()
kept their polarity (skip the sector when it is NOT in the bio list,
i.e. when there is nothing to write), but scrub_assemble_read_bios()
has the opposite polarity -- skip the sector when it IS in the bio
list, because then there is nothing to read -- and the conversion
flipped it:
- sector = sector_in_rbio(rbio, stripe, sectornr, 1);
- if (sector)
+ paddr = sector_paddr_in_rbio(rbio, stripe, sectornr, 1);
+ if (paddr == INVALID_PADDR)
continue;
Since a parity-scrub rbio's bio list only holds the empty completion
bio, the result is that scrub_assemble_read_bios() submits no reads at
all. finish_parity_scrub() then compares the parity it computes from
the (cached, correct) data stripes against whatever happens to be in
the freshly allocated, uninitialized stripe pages:
- if the garbage differs from the computed parity, the sector is
"repaired" and written back -- accidentally producing the correct
on-disk result;
- if a recycled page happens to still hold the old (correct) parity
content, the sector is deemed clean, dropped from dbitmap, and the
actually-corrupt on-disk parity is left in place. (Scrub reports
no errors either way: there is no counter for P/Q corruption by
design, so the bug here is purely the failure to read and repair.)
The second case is intermittent because it depends on page-allocator
recycling. Observed with fstests btrfs/297 (raid5, 2 devices): the
corrupted P stripe intermittently stays corrupt after a scrub --
roughly 1/10 runs on x86-64 KVM and up to 7/8 on a UML build whose
timing favors page reuse.
Since the bio-list check can never be true for a parity-scrub rbio --
raid56_parity_alloc_scrub_rbio() adds a single empty completion bio
(asserting bi_size == 0), bio_paddrs[] is only populated by
index_rbio_pages() which is never called for BTRFS_RBIO_PARITY_SCRUB,
and rbio_can_merge() refuses to merge rbios of different operations --
remove the dead check entirely and assert the invariant instead, as
suggested by Qu Wenruo.
After this fix the injected corruption is read, detected and repaired
in every run (8/8 UML, 10/10 KVM), and the new assertion never fires
across the full fstests raid group.
Fixes: 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
CC: stable@vger.kernel.org # 7.1+
Suggested-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Assisted-by: Claude:claude-fable-5
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mykola Lysenko <nickolay.lysenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A fully truncated ordered extent (truncated_len == 0) wrote no data, so its
->csum_list is empty and btrfs_finish_ordered_zoned() trips:
assertion failed: !list_empty(&ordered->csum_list), in fs/btrfs/zoned.c:2141
Since commit 66ff4d366e a short or cancelled direct IO write finishes the
unsubmitted ordered extent as truncated with uptodate = true instead of
setting BTRFS_ORDERED_IOERR, so it now reaches btrfs_finish_ordered_zoned()
rather than being skipped by the IOERR check in btrfs_finish_ordered_io().
generic/208 hits this on a zoned filesystem.
Return early for these, like the BTRFS_ORDERED_PREALLOC case; there is no
zone append result to record and btrfs_finish_one_ordered() skips them too.
Fixes: 66ff4d366e ("btrfs: fix false IO failure after falling back to buffered write")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[COMPILER WARNING]
With GCC 11.5.0 and KASAN enabled on ARM, the following warning is
triggered during compiling:
In file included from ./include/asm-generic/rwonce.h:26,
from ./arch/arm64/include/asm/rwonce.h:81,
from ./include/linux/compiler.h:369,
from ./include/linux/array_size.h:5,
from ./include/linux/kernel.h:16,
from fs/btrfs/ioctl.c:6:
In function ‘instrument_copy_from_user_before’,
inlined from ‘_inline_copy_from_user’ at ./include/linux/uaccess.h:184:2,
inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:222:9,
inlined from ‘btrfs_ioctl_get_csums.isra’ at fs/btrfs/ioctl.c:5220:6:
./include/linux/kasan-checks.h:38:27: warning: ‘args’ may be used uninitialized [-Wmaybe-uninitialized]
38 | #define kasan_check_write __kasan_check_write
./include/linux/instrumented.h:146:9: note: in expansion of macro ‘kasan_check_write’
146 | kasan_check_write(to, n);
| ^~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c: In function ‘btrfs_ioctl_get_csums.isra’:
./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here
20 | bool __kasan_check_write(const volatile void *p, unsigned int size);
| ^~~~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c:5201:43: note: ‘args’ declared here
5201 | struct btrfs_ioctl_get_csums_args args;
| ^~~~
[POSSIBLE FALSE ALERTS]
This seems to be a false alert from certain GCC versions.
The @args is immediately over-written by copy_from_user(), and there is
no code touching that @args until copy_from_user() finished correctly.
[WORKAROUND]
Initialize 'args' to zero, which suppresses the warning.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
reserve_chunk_space() stores the return value of
btrfs_zoned_activate_one_bg() in ret. The helper can return 1 after
successfully activating a block group, but ret is later used to decide
whether to reserve metadata for chunk tree updates.
As a result, successful activation skips btrfs_block_rsv_add() and leaves
trans->chunk_bytes_reserved unchanged. Use a separate variable for the
activation result so positive success does not affect the later
reservation. Keep activation failures in ret instead of returning early so
the function uses the common tail path.
Fixes: b6a98021e4 ("btrfs: zoned: activate necessary block group")
CC: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all()
helper") uses the new helper to replace the nested loop inside
verify_bio_data_sectors(), which simplifies the code.
However that also changed the behavior of "continue" when a block has no
data checksum.
Previously the "continue" would skip the old for() loop, which would also
increase @total_sector_nr.
Now the "continue" will skip the new btrfs_bio_for_each_block_all()
loop, which doesn't update @total_sector_nr.
This means if we hit a block that has no data checksum, we will skip all
the remaining blocks no matter if they have data checksum.
As @total_sector_nr will never be updated, and that test_bit() will
always return false.
Fix it by increasing @total_sector_nr before calling "continue".
Fixes: 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all() helper")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When rescue=ibadroots ignores a failure to load the raid stripe tree root,
fs_info->stripe_root remains NULL. After the rescue mount proceeds, reading
file data that requires the raid stripe tree reaches
btrfs_get_raid_extent_offset().
Currently btrfs_search_slot() handles the NULL root and returns -EINVAL.
This avoids a NULL pointer dereference, but provides no diagnostic and
incorrectly describes missing filesystem metadata as an invalid argument.
Check stripe_root before allocating a path, emit a rate-limited error with
the logical address, and return -EUCLEAN.
Lookups with a valid stripe root are unchanged.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dongjiang Zhu <zhudongjiang@fnnas.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
Fixes: 8dbfc14fc7 ("btrfs: account block group tree when calculating global reserve size")
Fixes: 515020900d ("btrfs: read raid stripe tree from disk")
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dongjiang Zhu <zhudongjiang@fnnas.com>
[ Squash the fs_is_full_ro() export commit into this one. ]
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_reset_unused_block_groups() resets a block group's zone and sets
alloc_offset back to 0 so the space can be reused, but it leaves
meta_write_pointer pointing at the previous end of the zone.
Once the block group is reactivated and reused for metadata, newly
allocated tree blocks live before that stale write pointer.
btrfs_check_meta_write_pointer() then sees them behind the write pointer,
so they can never be written out in sequential order: the dirty extent
buffers are stranded and pin their btree_inode folios until unmount.
Reset meta_write_pointer back to the start of the block group for
metadata and system block groups.
Fixes: 453a73c306 ("btrfs: zoned: reclaim unused zone by zone resetting")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem.
Fixes: 13bb483d32 ("btrfs: zoned: activate metadata block group on write time")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script can lead to unexpected qgroup rescan failure:
# mkfs.btrfs -f -O quota $dev
# mount $dev $mnt
# mount -o remount,rescue=ibadroots $mnt
^^^^^ This above command is expected to fail
# btrfs quota rescan -w $mnt
^^^^^ The above qgroup rescan is not expected to fail
# btrfs qgroup show $mnt
WARNING: qgroup data inconsistent, rescan recommended
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
The above short script will be converted to a proper fstests case.
[CAUSE]
Inside btrfs_reconfigure(), if either btrfs_check_options() or
btrfs_check_features() failed, we will always have
BTRFS_FS_STATE_REMOUNTING set for the fs until the next successful
remount.
That BTRFS_FS_STATE_REMOUNTING flag will interrupt several operations,
including:
- Qgroup rescan
- Auto defrag
- Space reclaim
[FIX]
Change the error handling of btrfs_check_options() and
btrfs_check_features() to goto restore label.
Fixes: eddb1a433f ("btrfs: add reconfigure callback for fs_context")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mmc_ioctl_cdrom_volume() first reads the audio control mode page into a
32-byte stack buffer with cgc->buflen set to 24. If the device reports a
block descriptor, the function increases cgc->buflen to include that
descriptor and reads the page again.
For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list
by moving cgc->buffer forward by offset - 8 bytes. This drops the block
descriptor from the outgoing payload and leaves a new 8-byte mode
parameter header in front of the audio control page. However, cgc->buflen
is left unchanged.
With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8
but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low
level packet path to write 32 bytes from that adjusted pointer, reading 8
bytes past the end of the 32-byte stack buffer.
This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on
drives that return a non-zero block descriptor length, which helps explain
why it has gone unnoticed. The overread is also sent to the device as
extra MODE SELECT payload, so it may not produce an obvious local failure.
Reduce cgc->buflen by the same amount as the buffer pointer adjustment so
the MODE SELECT transfer covers only the intended parameter list.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260720194421.1497-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
eprobe_dyn_event_match() checks if the target event system in argv[0]
matches ep->event_system using strncmp(ep->event_system, argv[0], len).
However, if ep->event_system is longer than len (e.g. "eprobes" vs
"ep/event"), strncmp() still returns 0 because the first len characters
match.
Check that ep->event_system[len] is '\0' to ensure exact system name
matching.
Link: https://lore.kernel.org/all/178454235856.290363.14872590900774231133.stgit@devnote2/
Fixes: 7d5fda1c84 ("tracing: Fix event probe removal from dynamic events")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In __set_print_fmt(), LEN_OR_ZERO is defined as (len ? len - pos : 0).
If len is non-zero but smaller than pos, len - pos evaluates to a negative
integer. When passed as a size argument to snprintf(), this negative value
is cast to a large unsigned size_t, bypassing buffer size limits.
Ensure len > pos before subtracting to avoid integer underflow.
Link: https://lore.kernel.org/all/178454234934.290363.15247317871499514139.stgit@devnote2/
Fixes: 5bf652aaf4 ("tracing/probes: Integrate duplicate set_print_fmt()")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
If trace_probe_log.argc is 0 in __trace_probe_log_err(), the loop
constructing the command string will not execute and p will remain equal to
command. Writing to *(p - 1) will cause an out-of-bounds access before
command. This should not happen, but better to be treated.
Reject if trace_probe_log.argc is 0.
Link: https://lore.kernel.org/all/178454233992.290363.18323091580600697731.stgit@devnote2/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In trace_probe_match_command_args(), a stack buffer buf[MAX_ARGSTR_LEN + 1]
(256 bytes) is used to format "<name>=<comm>". However, since name can
be up to 32 bytes (MAX_ARG_NAME_LEN) and comm up to 255 bytes
(MAX_ARGSTR_LEN), the formatted string can exceed 256 bytes and get
truncated by snprintf(), causing spurious argument matching failures.
Instead of formatting into a temporary buffer on stack, compare the
argument name, the '=' delimiter, and the comm expression directly.
Link: https://lore.kernel.org/all/178454233010.290363.10428767141343428804.stgit@devnote2/
Fixes: eb5bf81330 ("tracing/kprobe: Add per-probe delete from event")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the devconf_all is
never initialized because inet6_init() exits before addrconf_init() is
called which initializes it. bond_send_validate(), however, will still
call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to
NULL derefence of net->ipv6.devconf_all in ip6_pol_route().
BUG: kernel NULL pointer dereference, address: 000000000000000c
[...]
Workqueue: bond0 bond_arp_monitor [bonding]
RIP: 0010:ip6_pol_route+0x69/0x480
[...]
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
? __pfx_ip6_pol_route_output+0x10/0x10
fib6_rule_lookup+0xfe/0x260
? wakeup_preempt+0x8a/0x90
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? sched_balance_rq+0x369/0x810
ip6_route_output_flags+0xd7/0x170
bond_ns_send_all+0xde/0x280 [bonding]
bond_ab_arp_probe+0x296/0x320 [bonding]
? srso_return_thunk+0x5/0x5f
bond_activebackup_arp_mon+0xb4/0x2c0 [bonding]
process_one_work+0x196/0x370
worker_thread+0x1af/0x320
? srso_return_thunk+0x5/0x5f
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x199/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by adding ipv6_mod_enabled() condition check in the caller.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Qianheng Peng <pengqh1@chinatelecom.cn>
Signed-off-by: Zhaolong Zhang <zhangzl68@chinatelecom.cn>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260707010622.487333-1-zhangzl2013@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for the NULL current->bpf_net_context deref hit
when a BPF classifier attached to a qdisc qevent block asks for a
redirect. The classifier runs from tcf_qevent_handle() on the qdisc
enqueue path, outside any bpf_net_context.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t qevent
[...]
+ /etc/rcS.d/S50-startup
./test_progs -t qevent
#496/1 tc_qevent/redirect_verdict:OK
#496/2 tc_qevent/redirect_helper:OK
#496 tc_qevent:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260706185609.330006-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TC filter attached to a qdisc filter chain returns
TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an
act_bpf action), the redirect was silently lost i.e no qdisc classify
function handled TC_ACT_REDIRECT, so the packet fell through the
switch and was enqueued normally instead of being redirected.
This has been broken since bpf_redirect() was introduced for TC in
commit 27b29f6305 ("bpf: add bpf_redirect() helper"). We got lucky
for a long time because bpf_net_context was a per-CPU variable that
was always available.
commit 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct
on PREEMPT_RT.") turned bpf_net_context into a task_struct member that
is only set up by explicit callers. Without a caller setting it up,
bpf_redirect() itself crashes with a NULL pointer dereference in
bpf_net_ctx_get_ri(). However, even with bpf_net_context available,
TC_ACT_REDIRECT from qdisc filter chains cannot be honored without
adding skb_do_redirect() calls to every qdisc classify function, which
would require changes across net/sched/. Isolate it to ebpf core where
it belongs.
Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a
wrapper around tcf_classify() for use by qdisc classify functions and
tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT,
the wrapper converts it to TC_ACT_SHOT, dropping the packet rather
than letting it continue silently. Dropping is preferred over
letting the packet through because the user immediately sees packet
loss. Silently passing the packet through would hide the problem and
leave the user wondering why their redirect is not working.
The clsact fast path, tc_run() continues to call tcf_classify() directly
and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by
sch_handle_egress/ingress() calling skb_do_redirect() as before.
Fixes: 27b29f6305 ("bpf: add bpf_redirect() helper")
Fixes: 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260706185609.330006-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it.
Fixes: 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Fixes: 3625750f05 ("net: sched: Introduce helpers for qevent blocks")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260706185609.330006-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packet_set_ring() temporarily detaches a socket from packet delivery while
reconfiguring its ring. It records the previous running state, clears
po->num, unregisters the protocol hook when needed, drops po->bind_lock,
and later restores po->num and re-registers the hook from the saved
was_running value.
That unlocked window can race with NETDEV_UNREGISTER. The notifier can
observe the socket as not running, skip __unregister_prot_hook(), and
invalidate the per-socket binding by setting po->ifindex to -1 and clearing
po->prot_hook.dev. A one-member fanout group can still retain its shared
fanout hook device pointer. When packet_set_ring() resumes, re-registering
solely from the stale was_running state can re-add the fanout hook after
the device has been unregistered.
Treat po->ifindex == -1 as an invalidated binding after reacquiring
po->bind_lock. This is distinct from ifindex 0, the normal
unbound/wildcard state: ifindex -1 marks an existing device binding that
was invalidated when the device was unregistered. Restore po->num as
before, but do not re-register the hook if device unregister already
detached the socket.
Fixes: dc99f60069 ("packet: Add fanout support.")
Link: https://lore.kernel.org/netdev/20260701113947.23180-1-david.lee@trailofbits.com/
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260707104440.833129-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of IFLA_BRPORT_* attributes are documented in the rt-link spec
as having the "flag" type, i.e. a payload-less NLA_FLAG attribute whose
meaning is presence-only. This does not match the kernel, which emits
these attributes with nla_put_u8() and validates them as NLA_U8 in
br_port_policy[]. The values are not mere presence flags but carry a u8
payload (0/1).
Convert these bridge port attributes from "flag" to "u8" so the spec
reflects the actual wire format.
Fixes: 077b6022d2 ("doc/netlink/specs: Add sub-message type to rt_link family")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/a57cdfcfc4a6dcb92106c25b4dde5059fde2bd44.1783236731.git.danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
