Sashiko noticed a mismatch of units in this math: num_leaves is
actually the number of leaf *entries* (so a 16-item contiguous leaf
is one num_leaves), while index is in items. The mismatch in maths
causes __map_range_leaf() to exit early instead of efficiently
filling a larger range of contiguous PTEs.
The early exit is caught by the functions above and then
__map_range_leaf() is re-invoked, so there is no functional issue.
Correct the misuse of units by adjusting num_leaves with the leaf
size and avoid the performance cost of looping externally.
There are also some mismatched types for num_leaves; simplify
things to remove the duplicated calculations.
Fixes: d6c65b0fd6 ("iommupt: Avoid rewalking during map")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewd-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path.
Fixes: dcd6a011a8 ("iommupt: Add map_pages op")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map.
Fixes: ccc21213f0 ("iommu: Add calls for IOMMU_DEBUG_PAGEALLOC")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Sashiko noticed a few issues in this path, and a few more were
found on review. Tidy them up further. These are intertwined
because the debug code depends on some of the WARN_ONs to function
right:
Lift into iommu_map_nosync():
- The might_sleep_if()
- 0 pgsize_bitmap WARN_ON
- Promote the illegal domain->type to a WARN_ON
- WARN_ON for illegal gfp flags
Then remove the return 0 since it is now safe to call
iommu_debug_map().
Lift into __iommu_unmap():
- 0 pgsize_bitmap WARN_ON
- Promote the illegal domain->type to a WARN_ON
- iommu_debug_unmap_begin()
This now pairs with the unconditional iommu_debug_map() on the
mapping side. Thus iommu debugging now works for iommupt along
with some of the other debugging features.
Fixes: 99fb8afa16 ("iommupt: Directly call iommupt's unmap_range()")
Fixes: d6c65b0fd6 ("iommupt: Avoid rewalking during map")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A typo, likely from a rebase, inverted the condition and caused
errors to be lost. Fix it to be "if (ret)".
This was breaking iommu_create_device_direct_mappings() on drivers
that don't use iommupt and don't fully set up their domain in
alloc_pages() (i.e., SMMUv2). In this case the first call of
iommu_create_device_direct_mappings() should fail due to the
incompletely initialized domain. Since it wrongly returns success,
the second call to iommu_create_device_direct_mappings() doesn't
happen and IOMMU_RESV_DIRECT is never set up.
Cc: stable@vger.kernel.org
Fixes: d6c65b0fd6 ("iommupt: Avoid rewalking during map")
Reported-by: Josua Mayer <josua@solid-run.com>
Closes: https://lore.kernel.org/all/321c2e57-6a17-4aef-ba42-d2ebd577e472@solid-run.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add support for the es9356 codec in the ARL board configuration.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260514075206.3483-5-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TCM_LOOP LUN creation process calls device_register() to create the
device, which in turn invokes tcm_loop_driver_probe() registered with
the TCM_LOOP bus to create and register the scsi_host. However, if the
scsi_host memory allocation fails or scsi_add_host() fails, the
device_register() process still returns success. Subsequently, when the
user binds the LUN to a specific backend device, it accesses the NULL or
freed scsi_host.
Crash Call Trace:
RIP: 0010:scsi_is_host_device+0x7/0x20
scsi_alloc_target+0x32/0x2c0
__scsi_add_device+0x41/0xf0
scsi_add_device+0xd/0x30
tcm_loop_port_link+0x25/0x50 [tcm_loop]
target_fabric_port_link+0x9c/0xb0 [target_core_mod]
...
This issue is fixed by:
1. Setting the tcm_loop_hba's scsi_host to NULL, if scsi_add_host()
fails.
2. Checking the tcm_loop_hba's scsi_host after device_register().
3. Checking the tcm_loop_hba's scsi_host in tcm_loop_driver_remove().
Fixes: 3703b2c5d0 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260424013923.25998-1-kanie@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On platforms that support Auto Hibern8 (AH8), the UFS controller can
autonomously de-assert clk_req signals to the Global Clock Controller
when entering the Hibern8 state. This allows Global Clock Controller
(GCC) to gate unused clocks, improving power efficiency.
Enable the Clock Request feature by setting the UFS_HW_CLK_CTRL_EN bit
in the UFS_AH8_CFG register, as recommended in the Hardware Programming
Guidelines.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260423102023.3779489-3-palash.kambar@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The number of connected lanes detected during UFS link startup can be
fewer than the lanes specified in the device tree. The current driver
logic attempts to configure all lanes defined in the device tree,
regardless of their actual availability. This mismatch may cause
failures during power mode changes.
Hence, Add a check during link startup to ensure that only the lanes
actually discovered are considered valid. If a mismatch is detected,
fail the initialization early, preventing the driver from entering an
unsupported configuration that could cause power mode transition
failures.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423102023.3779489-2-palash.kambar@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST)
Fixes: 7561177017 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://patch.msgid.link/20260513190852.196723-2-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
-----BEGIN PGP SIGNATURE-----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=UqYc
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-14' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficient here: interrupts are
only disabled when isci_host_stop_complete() runs, so until
wait_for_stop() returns the IRQ handlers can still requeue the
tasklet. The tasklet callback also re-enables interrupts after draining
completions, so killing the tasklet before the source is quiesced leaves
the same race open.
Once wait_for_stop() returns, no further IRQ-driven scheduling can
occur. Kill completion_tasklet there so teardown cannot race a queued
tasklet running on a dead ihost. On remove or unload, the stale callback
can otherwise dereference ihost and touch ihost->smu_registers after the
host lifetime ends.
A UML + KASAN analogue reproduced the failure class both with no
tasklet_kill() and with tasklet_kill() placed before source quiesce, and
stayed clean once the kill happened after quiescing the scheduling
source.
This mirrors commit f6ab594672 ("scsi: aic94xx: fix use-after-free in
device removal path"), but ISCI needs the kill after wait_for_stop().
Fixes: 6f231dda68 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pm80xx_get_non_fatal_dump() can be called even after the controller has
entered a fatal error state. In that case the forensic memory contents
are not safe to access for a non-fatal dump request, and attempting to
do so can trigger a call trace.
Check controller_fatal_error before reading the non-fatal dump buffer
and return -EINVAL when the controller is already in a crashed state.
This prevents non-fatal dump collection from running in an invalid
controller state.
Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416154650.415624-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pm8001_store_update_fw() allows a firmware update request even when the
controller has already entered a fatal error state.
Firmware update is not valid once the controller is in that state, and
attempting it can lead to a call trace. Reject the request early by
checking controller_fatal_error, set the firmware status to
FAIL_PARAMETERS, and return -EINVAL.
Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416153757.414896-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
WARNING is triggered when executing link reset of remote PHY and rmmod
SAS driver simultaneously. Following is the WARNING log:
WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
Call trace:
__device_links_no_driver+0xb4/0xc0
device_links_driver_cleanup+0xb0/0xfc
__device_release_driver+0x198/0x23c
device_release_driver+0x38/0x50
bus_remove_device+0x130/0x140
device_del+0x184/0x434
__scsi_remove_device+0x118/0x150
scsi_remove_target+0x1bc/0x240
sas_rphy_remove+0x90/0x94
sas_rphy_delete+0x24/0x3c
sas_destruct_devices+0x64/0xa0 [libsas]
sas_revalidate_domain+0xe4/0x150 [libsas]
process_one_work+0x1e0/0x46c
worker_thread+0x15c/0x464
kthread+0x160/0x170
ret_from_fork+0x10/0x20
---[ end trace 71e059eb58f85d4a ]---
During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.
Add the slave_destroy interface to make sure link is removed after flush
workque.
Fixes: 16fd4a7c59 ("scsi: hisi_sas: Add device link between SCSI devices and hisi_hba")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://patch.msgid.link/20260425082056.2749910-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
__LINE__ changes quite easily for cleanup commits. So when checking if a
cleanup patch introduces changes to the resulting binary each usage of
__LINE__ is source of annoyance.
So instead of __FILE__ and __LINE__ emit __func__ to give at least some
more indication about where the messages originates from than __FILE__
alone; with that and the actual message the situation should be clear
enough.
While at it reduce duplication by implementing mv_dprintk() using
mv_printk().
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260427174545.2014499-2-u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix two issues in libiscsi.c:
- Correct typo "numer" to "number" in iscsi_session_setup() comment
- Fix format string "seconds\n." to "seconds.\n" in recv timeout
warning
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260511093030.63542-1-wangyan01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a
global timer that could fire anywhere, enqueuing the work where the
timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260507143410.337267-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SoundWire slave update_status() callback can be invoked when the
status has not changed. To prevent large amounts of log noise with debug
enabled, log them only when the status changes. This also helps with
understanding them, because they now log an actual change in state.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260514151854.695145-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_get_parent() returns NULL when the clock has no parent (or when the
input clk is NULL); it never returns an ERR_PTR. The current IS_ERR(mux)
check therefore never triggers - a NULL return falls through silently
to clk_set_parent(NULL, parent_clk), which simply fails with -EINVAL.
Use a NULL check so the dedicated error path runs and the prior
clk_get() reference is released via clk_put().
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Acked-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260514185215.3753998-1-ingyujang25@korea.ac.kr
Signed-off-by: Mark Brown <broonie@kernel.org>
Symbolic permissions like S_IRUGO and S_IWUSR are not preferred by
checkpatch. Replace with their octal equivalents:
- S_IRUGO|S_IWUSR -> 0644
- S_IRUGO -> 0444
Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260506004948.2172-1-shofiqtest@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry.
Fixes: a21ee5b2fc ("net: ifb: support ethtools stats")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260514013739.3549624-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pci_device_id array uses a mixture of ways to initialize
ufshcd_pci_tbl[]. List initializers are hard to read unless you memoized
the order of the struct members. Use the PCI_VDEVICE for all entries and
a named initializer for .driver_data.
This allows to idiomatically assign the members without using zeros to
fill the fields before .driver_data (either explicitly or hidding in
PCI_VDEVICE()).
There are no changes to the compiled result of the array; verified with
builds for x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://patch.msgid.link/6cac1c22381f7026edad9854d70833381d14929a.1777968942.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A list initializer is hard to parse for a human if they don't see or
know the order of the members of struct pci_device_id. So use the
PCI_VDEVICE macro which is much more idiomatic and skip assigning
explicit zeros.
There are no changes to the compiled result of the array; verified with
builds for x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ff015bf46ad395702f40c85c8359fd24957e7224.1777968942.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After converting to guard()/scoped_guard() helpers,
omap_mcbsp_request() still mixes scoped cleanup with
goto based error handling.
Remove the remaining goto based cleanup paths for a more
consistent cleanup flow.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Acked-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260514110602.30480-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the watchdog device found on the Qualcomm IPQ9650 SoC.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260511-ipq9650_wdt_binding-v2-1-dca22892d3d3@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When setting vports max TX speed during LAG activation or bond state
changes, the code iterates over all eswitch vports. However, some
vports may not be enabled yet.
Skip vports that are not enabled to avoid sending FW commands for
uninitialized vports. Save the LAG aggregated speed in the vport
struct so it can be applied when the vport is enabled later.
Fixes: 50f1d188c5 ("net/mlx5: Propagate LAG effective max_tx_speed to vports")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260513063640.334132-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After IPsec policy/state TX rules are added, any TC flow rule, which
forwards packets to uplink, is modified to forward to IPsec TX tables.
As these tables are destroyed dynamically, whenever there is no
reference to them, the destinations of this kind of rules must be
restored to uplink, unless there is no destination for that rule.
The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not
have a destination port, and thus out_count = 0.
At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests
we call mlx5_eswitch_restore_ipsec_rule but as the above types
do not have a destination we get an underflow of out_count, as
the port is passed, which is esw_attr->out_count - 1.
This change avoids calling mlx5_eswitch_restore_ipsec_rule when
there are no output destinations and thus avoids the underflow.
Fixes: d1569537a8 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules")
Signed-off-by: Jeroen Massar <jmassar@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If mlx5e_rx_res_rss_set_rxfh() fails during mlx5e_create_rxfh_context(),
the RSS context is not cleaned up.
This leaves a stale entry in 'res->rss[rss_idx]' that occupies a context
slot.
Destroy the RSS context before returning the error.
Fixes: 6c2509d446 ("net/mlx5e: Add error flow for ethtool -X command")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260513062737.333259-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The assignment 'len = count' for RES_TYPE_INTR_PBA_LEGACY,
RES_TYPE_DEVCMD, and RES_TYPE_DEVCMD2 cases is never used.
Drop the unused assignments to fix the following static analyzer
warning.
No functional change.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Evgenii Burenchev <evg28bur@yandex.ru>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Link: https://patch.msgid.link/20260429095212.11251-1-evg28bur@yandex.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
First of all, it has to be 'default n' (small letter n), otherwise
it looks for CONFIG_N which is absent and in case of appearance
will enable something unrelated. Second and most important is that
'n' *is* the default 'default' already. Hence just drop malformed
line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513162612.365729-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the driver to use the new core helper that waits for the device
to enumerate on SoundWire and be initialised by the SoundWire core.
Suggested-by: Niranjan H Y <niranjan.hy@ti.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20260514083358.2559733-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sk_err check in tls_rx_rec_wait() consumes the error via
sock_error(), which clears sk_err atomically. When the caller
(tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already
has bytes copied to userspace, it returns those bytes and discards
the error from this call. sk_err is now zero on the socket, so the
next read syscall observes only RCV_SHUTDOWN and reports a clean
EOF instead of the actual error (typically -ECONNRESET).
The race is reachable when tls_read_flush_backlog()'s periodic
sk_flush_backlog() triggers tcp_reset() in the middle of a
multi-record read.
Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is
false, consume sk_err via sock_error() as before. When has_copied
is true, report the error from READ_ONCE() but leave sk_err set:
the caller returns the byte count and discards the err from this
call, and the next read syscall surfaces the preserved sk_err. This
mirrors the tcp_recvmsg() preserve-and-surface pattern.
The decrypt-abort path is unaffected: tls_err_abort() raises
sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing
on the caller's return path consumes it, so the EBADMSG surfaces
on the next read.
tls_sw_splice_read() passes has_copied=false: it processes
one record per call, so no bytes have been copied within the
function when tls_rx_rec_wait() runs. A reset that arrives
between iterations of splice_direct_to_actor() (the sendfile()
path) is still consumed by sock_error() in the later call, and the
outer loop returns the prior iterations' byte count and drops the
error. tcp_splice_read() exhibits the same pattern at the iteration
boundary; addressing it belongs at the splice_direct_to_actor()
layer and is out of scope here.
Fixes: c46b01839f ("tls: rx: periodically flush socket backlog")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware.
Fixes: 3937b7308d ("octeontx2-pf: Create representor netdev")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20260513151320.213260-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bastien Curutchet says:
====================
net: dsa: microchip: Remove unnecessary ksz_dev_ops callbacks [part]
This series continues the rework of the KSZ driver initiated by a previous
series (see [1]), following the discussion we had here [2].
The KSZ driver got way too convoluted over time because it uses a common
framework to handle more than 20 switches split in 5 families (see below
table)
+----------+---------+---------+---------+---------+---------+
| Family | KSZ8463 | KSZ87xx | KSZ88xx | KSZ9477 | LAN937X |
+----------+---------+---------+---------+---------+---------+
| Switches | KSZ8463 | KSZ8795 | KSZ88X3 | KSZ8563 | LAN9370 |
| | | KSZ8794 | KSZ8864 | KSZ9477 | LAN9371 |
| | | KSZ8765 | KSZ8895 | KSZ9896 | LAN9372 |
| | | | | KSZ9897 | LAN9373 |
| | | | | KSZ9893 | LAN9374 |
| | | | | KSZ9563 | |
| | | | | KSZ8567 | |
| | | | | KSZ9567 | |
| | | | | LAN9646 | |
+----------+---------+---------+---------+---------+---------+
The previous series ([1]) replaced the unique dsa_swicth_ops struct used
by all the KSZ families with one dsa_switch_ops struct for each family.
These dsa_switch_ops structs still rely on common functions that redirect
the calls to ksz_dev_ops operations which are custom to each switch
family. Many of hese ksz_dev_ops callbacks have a direct equivalent in the
struct dsa_switch_ops. This series directly connects the implementations of
these ksz_dev_ops operations to the relevant dsa_switch_ops attribute
to get rid of one unnecessary level of indirection.
====================
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-0-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksz_phylink_get_caps() is a bit different from other generic methods.
It has a dev_ops->get_caps() call in the middle of the function, and it
does other stuff before (set some supported_interfaces) and after (set
lpi_interfaces from supported_interfaces).
Whereas the dev_ops->get_caps() methods set mac_capabilities and
(optionally) logically OR the supported_interfaces with that of the PCS.
The idea is that this can be expressed simpler, and avoid a indirect
function call to dev_ops->get_caps(). If we tail-call the common
ksz_phylink_get_caps() from individual phylink_get_caps() methods, we do
reorder the settings, but in an inconsequential way (the transfer from
supported_interfaces to lpi_interfaces still sees a complete list of the
supported_interfaces).
Remove the no longer used get_caps() callbacl the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-7-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mirror operations are handled through a common function that redirects
the treatment to ksz_dev_ops callbacks. This layer of indirection isn't
needed since we now have a dsa_switch_ops for each switch family.
Remove this indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: mirror_add() and mirror_del() operations directly to
dsa_switch_ops.
Remove the now unused mirror callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-6-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB and MDB operations are handled through a common function that
redirects the treatment to ksz_dev_ops callbacks. This layer of
indirection isn't needed since we now have a dsa_switch_ops for each kind
of switch.
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: fdb_dump(), fdb_add(), fdb_del(), mdb_add() and mdb_del()
operations directly to dsa_switch_ops.
Remove the FDB and MDB operations from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-5-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VLAN operations are handled through a common function that redirects the
treatment to ksz_dev_ops callbacks. This level of indirection isn't
needed since we now have a dsa_switch_ops for each kind of switch.
Remove this useless layer of indirection by connecting directly the VLAN
operations to the relevant dsa_switch_ops.
Adapt their prototypes to match dsa_switch_ops expectations.
Remove the now unused VLAN callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-4-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MTU changing is done through a common function that redirects the
treatment to a specific ksz_dev_ops callback. This layer of indirection
isn't needed since we now have a dsa_switch_ops struct for each switch
family.
Remove this indirection layer in MTU changing for KSZ switches, by
directly connecting the ksz_dev_ops :: change_mtu() implementations to
dsa_switch_ops.
Remove the no longer used change_mtu() callback from ksz_dev_ops
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-3-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_switch_ops :: set_ageing_time() goes through ksz_set_ageing_time(),
further dispatched through ksz_dev_ops :: set_ageing_time(). Only
ksz9477 and lan937x provide an implementation for this, so remove the
(optional) method from ksz8463_switch_ops, ksz87xx_switch_ops,
ksz88xx_switch_ops. Also, hook up ksz9477 and lan937x dsa_switch_ops
directly to their respective implementations.
Every switch family provides a dsa_switch_ops :: port_fast_age()
implementation, which is dispatched through ksz_dev_ops ::
flush_dyn_mac_table(). Remove the dev_ops indirection and connect the
flush_dyn_mac_table() methods directly to their respective dsa_switch_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-2-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
