To prevent duplicating the framebuffer address and size point out the
existing framebuffer memory region instead of specifying the address
manually.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260408-judyln-followup-v1-3-823467519b59@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The modem firmware for this device doesn't preload the IPA firmware
and requires the OS handles that instead. Set qcom,gsi-loader = "self"
to reflect that.
Ensure the ipa uses the correct memory.
ipa 1e40000.ipa: channel 4 limited to 256 TREs
ipa 1e40000.ipa: IPA driver initialized
ipa 1e40000.ipa: received modem starting event
ipa 1e40000.ipa: received modem running event
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-judyln-followup-v1-2-823467519b59@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Camera doesn't work yet (imx351), but we can use the flash as a flashlight.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-judyln-followup-v1-1-823467519b59@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These PCIe devices with MMIO address should be inside soc node rather
than outside.
Fixes: 489f14be0e ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331090147.18522-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the sound card node for QCS615 Talos EVK with DA7212 codec
connected over the Primary MI2S interface. The configuration enables
headphone playback and headset microphone capture, both of which have
been tested to work.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409030156.155455-3-le.qi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This patch adds the Generic Pack Router (GPR) node together with
Audio Process Manager (APM) and Proxy Resource Manager (PRM)
audio service nodes to the Talos device tree description.
It also introduces MI2S1 pinctrl states for data0, data1, sck,
and ws lines, grouped into a single entry at the SoC-level DTSI
for better reuse and clarity.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409030156.155455-2-le.qi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make the complicated interrupt-map property (with multiple '0' entries)
a bit more readable by using known define for GIC_SPI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407201839.25759-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Wi-Fi firmware used on Xiaomi Poco F1 (beryllium) phone doesn't
support the host-capability QMI request, so add a quirk to skip it on
this device.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260407-skip-host-cam-qmi-req-v5-3-dfa8a05c6538@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7mNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylbXACfWg3KnXzN+gCG8PM/zVLtinrAhDgAoLzKi1xv
OqVhzuOICtZiP8WBoBoC
=SeVl
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmn+zbcACgkQFA3kzBSg
Kba3Uw//c4XYA1og7d/Hui+j8cKPB8+Wxerz66d3uKwhkaS2HS3W7TTJD6xffBya
o4i/Vr1lG3fKbktiai+wyfQa26CrPduV4fv7vHF6TT9vCdiCoyqL7e82ME0DaSqY
ux/scwheG93O3lw2cwDevZzZHlarDG0ZKp89HqwMzKwThT3NGQNmGN/SbWNDcc1B
tmvyuUDdQ8pooRCKfuWwNcJe2Sh6vmkFhGMGMzOrZwLZWoqbGN4ywcrhfQr20QR4
/5uzk6CKsuc+zgcl46gyMzExwimaKry3JFiZVUHLz2yursE3oBBzasn3/6BYHI2d
sv+20MJX13s8HtumvuKPZp6aBRVAIB2SYkG/ZnBwQmfuR21ndnrQIisaYCp18Rjt
90ouv2wpQTUYCXeDnye2weCgcsROX7FoB391PupLDShXikZOmqf94gmJBGkPW/vb
ZfukxvXEMddgW8Zpm6W1xoCXdeZSS5YwlBmhBhz+vYbIW4UwZQi98WxTVQZF6O3O
ch2GqZdUBJyxHkGCRlDpbXrqHKr/ZYRHidCxftIWIamt3Nvqsa5elFXOJekgixiu
/UNyDjSvI61OqGPfAq5tBrPb/Y7NDJQBiwoOm70rHTjeMLIOq4f1cx4Q2+CghJfw
cD4zauFZqfWM87J1j93x9krZBCD+qbVzmL8U8iBXCLrfQUg6SG0=
=rlX+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to:
Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP), Geert
Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar Chaurasiya (IBM),
Nathan Chancellor, Ritesh Harjani (IBM), Shivani Nittor, Sourabh Jain, Thomas
Zimmermann, Venkat Rao Bagalkote
-----BEGIN PGP SIGNATURE-----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=ZRl8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
Document SCM on Qualcomm Nord SoC which is compatible with 'qcom,scm'.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427130800.271146-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document GENI Serial Engine QUP Wrapper Controller on Nord SA8797P SoC
which is compatible with SA8255P one.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427005901.230237-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The OrangePi RV2 board has one eMMC slot, so enable eMMC.
Tested using a 16 GiB AJTD4R eMMC module.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260509100000.3315109-1-amadeus@jmu.edu.cn
Signed-off-by: Yixun Lan <dlan@kernel.org>
Agilex5 devkit supports a debug daughter card that inherits the
configurations from socdk but disables gpio0 and gmac2 and enables gmac0
and spi0.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable the CIX Sky1 pinctrl driver (PINCTRL_SKY1), CIX Sky1 PCIe host
controller (PCI_SKY1_HOST), and Cadence GPIO controller (GPIO_CADENCE)
for the Radxa Orion O6 board which uses the CIX Sky1 SoC.
The pinctrl driver is a dependency for other on-SoC peripherals. The
Cadence-based PCIe host controller enables use of PCIe peripherals on
the board. The Cadence GPIO controller provides GPIO support for the
SoC.
Cc: Yunseong Kim <ysk@kzalloc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://lore.kernel.org/r/20260327114628.3800886-1-peter.chen@cixtech.com
ntfs_write_volume_label() does not check the return value of
kstrdup(). If the allocation fails, vol->volume_label is set to
NULL while the function returns success. A subsequent
FS_IOC_GETFSLABEL then returns an empty string even though the
on-disk label was updated correctly.
Fix by allocating the new label before taking vol_ni->mrec_lock and
updating any on-disk metadata, so an -ENOMEM from kstrdup() leaves
both the in-memory and on-disk labels untouched and consistent. On
success the preallocated copy replaces the old vol->volume_label.
Also move mark_inode_dirty_sync() into the success path so that it
is not called when no metadata was actually modified.
Fixes: 6251f0b0de ("ntfs: update super block operations")
Suggested-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to
TCMalloc's creative use of the supposedly read-only field.
The fix is to introduce a new ABI variant based on
a new (larger) rseq area registration size, to keep
the TCMalloc use of rseq backwards compatible on new kernels.
(Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2QJp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Bastien Curutchet says:
====================
net: dsa: microchip: Remove one indirection layer
This series follows the discussions we had on a previous series that
aimed to add PTP support for the KSZ8463 (cf [1]).
The KSZ driver got way too convoluted over time because it uses a common
framework to handle more than 20 switches split in 5 families (see below
table)
+----------+---------+---------+---------+---------+---------+
| Family | KSZ8463 | KSZ87xx | KSZ88xx | KSZ9477 | LAN937X |
+----------+---------+---------+---------+---------+---------+
| Switches | KSZ8463 | KSZ8795 | KSZ88X3 | KSZ8563 | LAN9370 |
| | | KSZ8794 | KSZ8864 | KSZ9477 | LAN9371 |
| | | KSZ8765 | KSZ8895 | KSZ9896 | LAN9372 |
| | | | | KSZ9897 | LAN9373 |
| | | | | KSZ9893 | LAN9374 |
| | | | | KSZ9563 | |
| | | | | KSZ8567 | |
| | | | | KSZ9567 | |
| | | | | LAN9646 | |
+----------+---------+---------+---------+---------+---------+
A unique struct dsa_switch_ops is used by all the switches. Next to it,
each switch family has its own struct ksz_dev_ops with family-specific
callbacks. So the dsa_switch_ops operations handle the specificities of
each family through these ksz_dev_ops callbacks and/or conditional
branches based on the chip ID.
Vladimir initiated a rework of the driver ([2]) which I carried on. On
top of the rework I added PTP and periodic output support for the
KSZ8463 (which was my first goal). There are more than 60 patches for
all this so this series will be followed by several others and if you
want to see the full picture we can check my github ([3]).
This first series aims to split the unique struct dsa_switch_ops into
5 so each switch family will be able to implement its own set of DSA
operations.
I haven't finished yet to group all the patches into meaningful series
but here is more or less what I plan to do next:
- A series will remove from the struct ksz_dev_ops the callbacks
that have an equivalent in dsa_switch_ops to remove one level of
indirection.
- A series will split again some operations to get rid of the
if (is_kszXYZ) branches.
- Maybe a fourth one will be needed to completely move out of
ksz_common.c everything that isn't truly common to all the switches
- A series will add PTP support for the KSZ8463
- A final series will add periodic output support for the KSZ8463
[1]: https://lore.kernel.org/r/20260304-ksz8463-ptp-v6-0-3f4c47954c71@bootlin.com)
[2]: https://github.com/vladimiroltean/linux/tree/ksz_separate_dsa_switch_ops
[3]: https://github.com/bastien-curutchet/linux/tree/ksz_rework
====================
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-0-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the KSZ switches use the same ksz_connect_tag_protocol while they
don't support all the KSZ tag protocols. So if, for some reason, a given
switch tries to connect another KSZ tag protocol, it won't fail.
Split the common ksz_connect_tag_protocol() into switch-specific
operations. This way, each switch will only accept to connect the tag
protocol it supports.
Remove the no longer used common operation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-9-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the switch families use a common function to implement
.get_tag_protocol(). This function then returns the relevant protocol
depending on the chip ID.
Make the protocol to dsa_switch_ops association a little bit more
obvious by having separate implementations.
Change made by manually checking which chip id has which dsa_switch_ops
assigned to it, then filtering the common ksz_get_tag_protocol() for
just those chip IDs pertaining to it.
As an important benefit, we no longer have that weird-looking
DSA_TAG_PROTO_NONE fallback which was never actually returned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-8-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that each switch driver has its own dsa_switch_ops (currently a copy
of ksz_switch_ops), we no longer need ksz_switch_ops and can remove it.
Get to the driver-specific dsa_switch_ops through the ksz_chip_data
structure.
Reorder the alloc()/get_match_data() calls such as to have that
pointer available.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-7-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we have a single dsa_switch_ops for 4 very distinct families
of switches, and many dsa_switch_ops methods are simply a dispatches
through ksz_dev_ops. That creates an avoidable level of indirection.
As a preparation for removing that indirection layer, create a separate
dsa_switch_ops structure wherever we have a ksz_dev_ops. These
structures are not yet used - ksz_switch_ops from ksz_common.c still is.
However, this reduces the noise from subsequent changes.
All new dsa_switch_ops are exact copies of ksz_switch_ops. But we need
to export function prototypes from ksz_common.c so that they are
callable from individual drivers.
Note that "individual drivers" are not actual separate kernel modules.
All of ksz8.c, ksz9477.c and lan937x_main.c are part of the same
ksz_switch.ko. Only the "register interface" drivers are different
modules (ksz9477_i2c.o for I2C, ksz_spi.o for SPI, ksz8863_smi.o for
MDIO). So we don't need to export any symbol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-6-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to ksz_dev_ops, struct phylink_mac_ops shouldn't be part of
the common code. Instead, the common code should provide callable
functionality.
Invert the paradigm and export the common aspects from ksz_common.c, and
move the chip-specific stuff in individual drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-5-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ9477 and the LAN937 to
their individual drivers.
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-4-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ8xxx to ksz8.c
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-3-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: ICM page management in VHCA_ID mode
This series adds driver support for the VHCA_ID page management mode.
When firmware and driver support this mode, ICM (Interconnect Context
Memory) page management uses the device vhca_id as the function
identifier in MANAGE_PAGES, QUERY_PAGES, and page request events instead
of the legacy function_id + ec_function pair.
Background
Firmware can operate page management in two modes:
FUNC_ID mode (current): Function identity is (function_id, ec_function).
This remains the default and is used for boot pages and when the new
mode capability is not set.
VHCA_ID mode (new): Function identity is vhca_id only; ec_function is
ignored. This aligns page management with the vhca_id-based model used
by other firmware commands and simplifies identification on SmartNIC and
multi-function setups.
====================
Link: https://patch.msgid.link/20260506133239.276237-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for VHCA_ID-based page management mode. When the device
firmware advertises the icm_mng_function_id_mode capability with
MLX5_ID_MODE_FUNCTION_VHCA_ID, page management operations between the
driver and firmware may use vhca_id instead of function_id as the
effective function identifier, and the ec_function field is ignored.
Update page management commands to conditionally set ec_function field
only in FUNC_ID mode. Boot page allocation always uses FUNC_ID mode
semantics for backward compatibility, as the capability bit is only
available after set_hca_cap(). If after set_hca_cap() VHCA_ID mode was
set, modify the tracking of the boot pages in page_root_xa to use
vhca_id too.
Add mlx5_esw_vhca_id_to_func_type() to resolve the function type in
VHCA_ID mode, enabling per-type debugfs counters. Use a dedicated
vhca_type_map xarray, to provide lockless lookup. Store the resolved
type on each fw_page at allocation time so reclaim and release paths
read it directly without any lookup.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the per function type debugfs page counters dynamically added after
mlx5_eswitch_init(). When page management operates in vhca_id mode, only
the function acting as either eSwitch or vport manager can initialize
the eSwitch structure and translate the vhca_id to function type for the
functions to which it supplies pages. The next patch will add support
for page management in vhca_id mode.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several eswitch functions that only query other functions' HCA
capabilities or read cached vport state are guarded by the
vhca_resource_manager capability. This capability is required for
set_hca_cap operations but query_hca_cap of other functions only
requires the vport_group_manager capability.
Relax the capability check from vhca_resource_manager to
vport_group_manager in the following query-only paths:
- mlx5_esw_vport_caps_get() - queries other function general caps
- esw_ipsec_vf_query_generic() - queries other function ipsec cap
- mlx5_devlink_port_fn_migratable_get() - reads cached vport state
- mlx5_devlink_port_fn_roce_get() - reads cached vport state
- mlx5_devlink_port_fn_max_io_eqs_get() - queries other function caps
- mlx5_esw_vport_enable/disable() - vhca_id map/unmap
Functions that perform also set_hca_cap (migratable_set, roce_set,
max_io_eqs_set, esw_ipsec_vf_set_generic, esw_ipsec_vf_set_bytype)
retain the vhca_resource_manager requirement.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the device is removed all allocated resources should be freed.
In uhdlc_memclean the netdev transmit queue was already stopped. But at
this point we may have pending skb in the transmit queue which must be
freed. Therefore iterate over the tx_skbuff pointers and free all
pending skb. The issue was discovered by sashiko.
Tested on a ls1043a board running HDLC in bus mode on kernel 6.12.
https: //sashiko.dev/#/patchset/20260429114208.941011-1-holger.brunck%40hitachienergy.com
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Link: https://patch.msgid.link/20260507155332.3452319-1-holger.brunck@hitachienergy.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i40t
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Allow initial x_tables table replacement without emitting an audit
log message. Delay the register message until after hooks are wired up
to avoid unnecessary unregister logs during error unwinding.
2) Fix a NULL dereference by allocating hook ops before adding the
table to the per-netns list. Use `synchronize_rcu()` during error
unwinding to ensure the table stops processing packets before
teardown. Defer audit log register message until all operations
succeed.
3) Refactor xtables to use a single `xt_unregister_table_pre_exit`
function. Eliminate code duplication by centralizing table
unregistration logic within the xtables core. ebtables cannot be
changed due to incompatibility.
4) Unregister xtables templates before module removal. This prevents
a race condition where userspace instantiates a new table after the
pernet unreg removed the current table.
5) Add `xtables_unregister_table_exit` to fully unregister netfilter
tables during module removal. Unlink the table from dying lists,
then free hook operations.
6) Implement a two-stage removal scheme for ebtables following the
x_tables pattern. Assign table->ops while holding the ebt mutex to
prevent exposing partially-filled structures.
7) Fix ebtables module initialization race. Register the template last
in table initialization functions. Prevent table instantiation before
pernet operations are available.
8) Fix a race condition in x_tables module initialization. Ensure
pernet ops are fully set up before exposing the table to userspace.
9) Fix a race condition in ebtables module initialization, similar to
previous patch.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Validate that the expectation tuple and mask netlink attributes are
present when adding expectation via nfqueue, this fixes a possible
null-ptr-deref.
12) Fix possible rare memleak in the SIP helper in case helper has been
detached from conntrack entry, from Li Xiasong.
13) Fix refcount leak in nft_ct when creating custom expectation, also
from Li Xiason.
Patches 1-9 from Florian Westphal.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Check that tuple and mask netlink attributes are set when creating an
expectation via nfqueue.
* tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: fix missing expect put in obj eval
netfilter: nf_conntrack_sip: get helper before allocating expectation
netfilter: ctnetlink: check tuple and mask in expectations created via nfqueue
netfilter: nf_conntrack_expect: restore helper propagation via expectation
netfilter: bridge: eb_tables: close module init race
netfilter: x_tables: close dangling table module init race
netfilter: ebtables: close dangling table module init race
netfilter: ebtables: move to two-stage removal scheme
netfilter: x_tables: add and use xtables_unregister_table_exit
netfilter: x_tables: unregister the templates first
netfilter: x_tables: add and use xt_unregister_table_pre_exit
netfilter: x_tables: allocate hook ops while under mutex
netfilter: x_tables: allow initial table replace without emitting audit log message
====================
Link: https://patch.msgid.link/20260507234509.603182-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
