By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Some Qualcomm pin controller drivers already have this correctly placed,
so adjust the other drivers. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Qualcomm TLMM-based pin controllers share the same gpio-hog binding
semantics across multiple SoCs. The gpio-hog pattern currently defined in
qcom,ipq4019-pinctrl.yaml and qcom,sdm845-pinctrl.yaml are not SOC specific
and applies to all TLMM controllers.
Move the gpio-hog patternProperties definition to qcom,tlmm-common.yaml so
that it can be reused by other Qualcomm TLMM pinctrl bindings and avoid
schema duplication.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use a flexible array member to combine allocations and simplify code
slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[linusw@kernel.org: add a counter and __counted_by() annotation]
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
While Ingenic is a 32-bit platform, it is still better to use the
correct type, to serve as an example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the pin controller block on SM6350 Low Power Island.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
[linusw@kernel.org: fixed up Kconfig entry]
Signed-off-by: Linus Walleij <linusw@kernel.org>
On some platforms like SM6350 (Bitra), some pins have their slew
controlled with the SPARE_1 register. Add support for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Remove SDC_QDSD_PINGROUP, QUP_I3C and UFS_RESET macros as on some
platforms they are unused.
No functional impact.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver includes the legacy GPIO header <linux/gpio.h> but does not use
any symbols from it and actually wants <linux/gpio/consumer.h>, so fix this
up.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260506084858.867884-2-andriy.shevchenko@linux.intel.com
Define interrupts properly. Unfortunately, this hides a bug in the linux
driver, so it needs to be used with the driver fixed only.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251231-mpu9150-v1-2-08ecf085c4ae@kernel.org
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
The software controller requires that there is one MBM counter per monitor
group that is assigned to the event backing the software controller, as per
mba_MBps_event. When mbm_event mode is in use, it is not guaranteed that any
particular event will have an assigned counter.
Currently, only AMD systems support counter assignment, but the MBA delay
is non-linear and so the software controller is never supported anyway. On
MPAM systems, the MBA delay is linear and so the software controller could
be supported. The MPAM driver, unless a need arises, will not support the
'default' mbm_assign_mode and will always use the 'mbm_event' mode for
memory bandwidth monitoring.
Rather than develop a way to guarantee the counter assignment requirements
needed by the software controller, take the pragmatic approach. Don't allow
the software controller to be used at the same time as 'mbm_event' mode. As
MPAM is the only relevant architecture and it will use 'mbm_event' mode
whenever there are assignable MBM counters, for simplicity's sake, don't
allow the software controller when the MBM counters are assignable.
Implement this by failing the mount if the user requests the software
controller, the mba_MBps option, and the MBM counters are assignable.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
When the counter assignment mode is mbm_event resctrl assumes the MBM
events are configurable and exposes the 'event_filter' files. These files
live at info/L3_MON/event_configs/<event>/event_filter and are used to
display and set the event configuration.
The MPAM architecture has support for configuring the memory bandwidth
utilization (MBWU) counters to only count reads or only count
writes. However, in MPAM, this event filtering support is optional in the
hardware (and not yet implemented in the MPAM driver) but MBM counter
assignment is always possible for MPAM MBWU counters.
In order to support mbm_event mode with MPAM, create the 'event_filter'
files read only if the event configuration can't be changed. A user can
still chmod the file and so also return early with an error from
event_filter_write().
Introduce a new monitor property, mbm_cntr_configurable, to indicate
whether or not assignable MBM counters are configurable. On x86, set this
to true whenever mbm_cntr_assignable is true to keep existing behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
The error path in resctrl_mkdir_event_configs() is unnecessarily
complicated. Simplify it to just return directly on error.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20260506082855.3694761-1-ben.horgan@arm.com
KVM/arm64 and KVM/s390 will eventually share some code. Add me as
a cross-reviewer from the s390 team to arm64 to help to keep both
architectures in sync.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://patch.msgid.link/20260428160527.1378085-16-seiden@linux.ibm.com
[maz: rephrase commit message to use future tense, since this is
merged ahead of the code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Sashiko(locally) reports possiblity of division by zero and
out-of-bounds bitwise shift in trace_clock_update().
Although the clock update is untrusted, we should at least have some
basic checks to avoid undefined behaviours.
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://patch.msgid.link/20260430103724.2151625-1-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the following failure to the steal_time test on arm64 by making
the timer address known to the guest.
==== Test Assertion Failure ====
steal_time.c:229: !ret
pid=18514 tid=18514 errno=22 - Invalid argument
1 0x000000000040252f: check_steal_time_uapi at steal_time.c:229 (discriminator 20)
2 (inlined by) main at steal_time.c:537 (discriminator 20)
3 0x0000ffffa23d621b: ?? ??:0
4 0x0000ffffa23d62fb: ?? ??:0
5 0x0000000000402b6f: _start at ??:?
KVM_SET_DEVICE_ATTR failed, rc: -1 errno: 22 (Invalid argument)
Fixes: 40351ed924 ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://patch.msgid.link/20260504112808.21276-1-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
gmem_abort() calls kvm_pgtable_stage2_map() to make changes to stage 2. It
does this for both relaxing permissions on an existing mapping and to
install a missing mapping.
kvm_pgtable_stage2_map() doesn't make changes to stage 2 if there is an
existing, valid entry and the new entry modifies only the permissions.
This is checked in:
kvm_pgtable_stage2_map()
stage2_map_walk_leaf()
stage2_map_walker_try_leaf()
stage2_pte_needs_update()
and if only the permissions differ, kvm_pgtable_stage2_map() returns
-EAGAIN and KVM returns to the guest to replay the instruction. The
assumption is that a concurrent fault on a different VCPU already mapped
the faulting IPA, and replaying the instruction will either succeed, or
cause a permission fault, which should be handled with
kvm_pgtable_stage2_relax_perms().
gmem_abort(), on a read or write fault on a system without DIC (instruction
cache invalidation required for data to instruction coherence), installs a
valid entry with read and write permissions, but without executable
permissions. On an execution fault on the same page, gmem_abort() attempts
to relax the permissions to allow execution, but calls
kvm_pgtable_stage2_map() to change the existing, valid, entry.
kvm_pgtable_stage2_map() returns -EAGAIN and KVM resumes execution from the
faulting instruction, which leads to an infinite loop of permission faults
on the same instruction.
Allow the guest to make progress by using kvm_pgtable_stage2_relax_perms()
to relax permissions.
Fixes: a7b57e0995 ("KVM: arm64: Handle guest_memfd-backed guest page faults")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260505094913.75317-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When running an nVHE L1, TCR_EL2 is mapped to TCR_EL1. Writes to the
register are trapped and written to TCR_EL1 after a translation.
Booting an nVHE L1 with 52-bit VA isn't working because the translation
was ignoring the DS bit set by the guest, hence causing repeating level
0 faults. Add it in the translation function.
Signed-off-by: Wei-Lin Chang <weilin.chang@arm.com>
Link: https://patch.msgid.link/20260505144735.1496530-1-weilin.chang@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
C1-Pro cores with SME have an erratum where TLBI+DSB does not complete
all outstanding SME accesses. Instead a DSB needs to be executed on the
affected CPUs. The implication is that pages cannot be unmapped from the
host Stage 2 and then provided to a protected guest or to the
hypervisor. Host SME accesses may still complete after this point.
This erratum breaks pKVM's guarantees, and the workaround is hard to
implement as EL2 and EL1 share a security state meaning EL1 can mask
IPIs sent by EL2, leading to interrupt blackouts.
Instead, do this in EL3. This has the advantage of a separate security
state, meaning lower EL cannot mask the IPI. It is also simpler for EL3
to know about CPUs that are off or in PSCI's CPU_SUSPEND.
Add the needed hook to host_stage2_set_owner_metadata_locked(). This
covers the cases where the host loses access to a page:
__pkvm_host_donate_guest()
__pkvm_guest_unshare_host()
host_stage2_set_owner_locked() when owner_id == PKVM_ID_HYP
Since pKVM relies on the firmware call for correctness, check for the
firmware counterpart during protected KVM initialisation and fail the
pKVM initialisation if it is missing.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260505165205.2690919-1-catalin.marinas@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
bio_crypt_set_ctx(), blk_crypto_init_key(), and
blk_crypto_start_using_key() are needed to use inline encryption; see
Documentation/block/inline-encryption.rst. Export them so that
dm-inlinecrypt can use them. The only reason these weren't exported
before was that inline encryption was previously used only by fs/crypto/
which is built-in code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Make sure to only call pick_next_entity() on an non-empty cfs_rq.
The assumption that p is always enqueued and not delayed, is only true for
wakeup. If p was moved while delayed, pick_next_entity() will dequeue it and
the cfs might become empty. Test if there are still queued tasks before trying
again to determine if p could be the next one to be picked.
There are at least 2 cases:
When cfs becomes idle, it tries to pull tasks but if those pulled tasks are
delayed, they will be dequeued when attached to cfs. attach_tasks() ->
attach_task() -> wakeup_preempt(rq, p, 0);
A misfit task running on cfs A triggers a load balance to be pulled on a better
cpu, the load balance on cfs B starts an active load balance to pulled the
running misfit task. If there is a delayed dequeue task on cfs A, it can be
pulled instead of the previously running misfit task. attach_one_task() ->
attach_task() -> wakeup_preempt(rq, p, 0);
Fixes: ac8e69e693 ("sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260503104503.1732682-1-vincent.guittot@linaro.org
Zhan Xusheng reported running into sporadic a s64 mult overflow in
vruntime_eligible().
When constructing a worst case scenario:
If you have cgroups, then you can have an entity of weight 2 (per
calc_group_shares()), and its vlag should then be bounded by: (slice+TICK_NSEC)
* NICE_0_LOAD, which is around 44 bits as per the comment on entity_key().
The other extreme is 100*NICE_0_LOAD, thus you get:
{key, weight}[] := {
puny: { (slice + TICK_NSEC) * NICE_0_LOAD, 2 },
max: { 0, 100*NICE_0_LOAD },
}
The avg_vruntime() would end up being very close to 0 (which is
zero_vruntime), so no real help making that more accurate.
vruntime_eligible(puny) ends up with:
avg = 2 * puny.key (+ 0)
load = 2 + 100 * NICE_0_LOAD
avg >= puny.key * load
And that is: (slice + TICK_NSEC) * NICE_0_LOAD * NICE_0_LOAD * 100, which will
overflow s64.
Zhan suggested using __builtin_mul_overflow(), however after staring at
compiler output for various architectures using godbolt, it seems that using an
__int128 multiplication often results in better code.
Specifically, a number of architectures already compute the __int128 product to
determine the overflow. Eg. arm64 already has the 'smulh' instruction used. By
explicitly doing an __int128 multiply, it will emit the 'mul; smulh' pattern,
which modern cores can fuse (armv8-a clang-22.1.0). x86_64 has less branches
(no OF handling).
Since Linux has ARCH_SUPPORTS_INT128 to gate __int128 usage, also provide the
__builtin_mul_overflow() variant as a fallback.
[peterz: Changelog and __int128 bits]
Fixes: 556146ce5e ("sched/fair: Avoid overflow in enqueue_entity()")
Reported-by: Zhan Xusheng <zhanxusheng1024@gmail.com>
Closes: https://patch.msgid.link/20260415145742.10359-1-zhanxusheng%40xiaomi.com
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260505103155.GN3102924%40noisy.programming.kicks-ass.net
Update the selftests so they are executed for legacy (32 bytes RSEQ region)
and optimized RSEQ ABI v2 mode.
Fixes: d6200245c7 ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224428.009121296%40kernel.org
Cc: stable@vger.kernel.org
Due to the incompatibility with TCMalloc the RSEQ optimizations and
extended features (time slice extensions) have been disabled and made
run-time conditional.
The original RSEQ implementation, which TCMalloc depends on, registers a 32
byte region (ORIG_RSEG_SIZE). This region has a 32 byte alignment
requirement.
The extension safe newer variant exposes the kernel RSEQ feature size via
getauxval(AT_RSEQ_FEATURE_SIZE) and the alignment requirement via
getauxval(AT_RSEQ_ALIGN). The alignment requirement is that the registered
RSEQ region is aligned to the next power of two of the feature size. The
kernel currently has a feature size of 33 bytes, which means the alignment
requirement is 64 bytes.
The TCMalloc RSEQ region is embedded into a cache line aligned data
structure starting at offset 32 bytes so that bytes 28-31 and the
cpu_id_start field at bytes 32-35 form a 64-bit little endian pointer with
the top-most bit (63 set) to check whether the kernel has overwritten
cpu_id_start with an actual CPU id value, which is guaranteed to not have
the top most bit set.
As this is part of their performance tuned magic, it's a pretty safe
assumption, that TCMalloc won't use a larger RSEQ size.
This allows the kernel to declare that registrations with a size greater
than the original size of 32 bytes, which is the cases since time slice
extensions got introduced, as RSEQ ABI v2 with the following differences to
the original behaviour:
1) Unconditional updates of the user read only fields (CPU, node, MMCID)
are removed. Those fields are only updated on registration, task
migration and MMCID changes.
2) Unconditional evaluation of the criticial section pointer is
removed. It's only evaluated when user space was interrupted and was
scheduled out or before delivering a signal in the interrupted
context.
3) The read/only requirement of the ID fields is enforced. When the
kernel detects that userspace manipulated the fields, the process is
terminated. This ensures that multiple entities (libraries) can
utilize RSEQ without interfering.
4) Todays extended RSEQ feature (time slice extensions) and future
extensions are only enabled in the v2 enabled mode.
Registrations with the original size of 32 bytes operate in backwards
compatible legacy mode without performance improvements and extended
features.
Unfortunately that also affects users of older GLIBC versions which
register the original size of 32 bytes and do not evaluate the kernel
required size in the auxiliary vector AT_RSEQ_FEATURE_SIZE.
That's the result of the lack of enforcement in the original implementation
and the unwillingness of a single entity to cooperate with the larger
ecosystem for many years.
Implement the required registration changes by restructuring the spaghetti
code and adding the size/version check. Also add documentation about the
differences of legacy and optimized RSEQ V2 mode.
Thanks to Mathieu for pointing out the ORIG_RSEQ_SIZE constraints!
Fixes: d6200245c7 ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.927160119%40kernel.org
Cc: stable@vger.kernel.org
The optimized RSEQ V2 mode requires that user space adheres to the ABI
specification and does not modify the read-only fields cpu_id_start,
cpu_id, node_id and mm_cid behind the kernel's back.
While the kernel does not rely on these fields, the adherence to this is a
fundamental prerequisite to allow multiple entities, e.g. libraries, in an
application to utilize the full potential of RSEQ without stepping on each
other toes.
Validate this adherence on every update of these fields. If the kernel
detects that user space modified the fields, the application is force
terminated.
Fixes: d6200245c7 ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.845230956%40kernel.org
Cc: stable@vger.kernel.org
The RSEQ legacy mode behavior requires that the ID fields in the rseq
region are unconditionally updated on every context switch and before
signal delivery even if not required by the ABI specification.
To ensure that this behavior is preserved for legacy users in the future,
add a test which validates that with a sleep() and a signal sent to self.
Provide a run script which prevents GLIBC from registering a RSEQ region,
so that the test can register it's own legacy sized region.
Fixes: 566d8015f7 ("rseq: Avoid CPU/MM CID updates when no event pending")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.764705536%40kernel.org
Cc: stable@vger.kernel.org
Commit f77f281b61 ("fsverity: use a hashtable to find the
fsverity_info") made fsverity_active() check whether the inode has the
verity flag, rather than whether the inode's fsverity_info is loaded.
This broke ovl_ensure_verity_loaded(), which wants to load the
fsverity_info for any verity inodes that haven't had it loaded yet.
Therefore, to check that the fsverity_info hasn't yet been loaded, use
fsverity_get_info(inode) == NULL instead of !fsverity_active(inode).
Also, since fsverity_get_info() now involves a hash table lookup, put
the more lightweight IS_VERITY() flag check first.
Fixes: f77f281b61 ("fsverity: use a hashtable to find the fsverity_info")
Cc: stable@vger.kernel.org
Link: https://github.com/bootc-dev/bootc/issues/2174
Signed-off-by: Colin Walters <walters@verbum.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260505224257.23213-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
TAS2781 HDA I2C and SPI queue RCA firmware loading from component
bind with request_firmware_nowait(). The firmware loader keeps the
callback module pinned and holds a device reference, but the callback
still uses driver-private HDA state.
Component unbind removes controls and DSP state immediately. Later
device removal tears down the TAS2781 private data, including
codec_lock. If the async firmware callback runs after unbind has
started, it can operate on state that is being torn down.
Cancel or synchronize the async firmware request before removing
controls and DSP state. A queued callback is cancelled, and an
already-running callback is allowed to finish before unbind continues.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Fixes: bb5f86ea50 ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-2-e7c4bf930dc8@gmail.com
request_firmware_nowait() keeps the callback module pinned and holds
a device reference until the firmware work completes.
Callers still have no way to cancel or synchronize the queued callback
before tearing down their driver-private state.
Track scheduled async firmware work in an internal list and add
request_firmware_nowait_cancel(). The helper cancels work matching the
device, callback context and callback function. It cancels work that has
not started yet and waits for an already-running callback to return. If
the request has already completed, it is a no-op.
Keep the existing request_firmware_nowait() lifetime model manual. A
devres-managed variant can be layered on top separately if needed.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-1-e7c4bf930dc8@gmail.com
This reverts commit 025f89b01e.
025f89b01e ("drm/i915: replace select with dependency for visible
DEBUG_OBJECTS") breaks the build in certain scenarios, presumably
because config DRM_I915_DEBUG selects DRM_I915_SW_FENCE_DEBUG_OBJECTS
without looking at its dependencies, allowing
DRM_I915_SW_FENCE_DEBUG_OBJECTS=y and DEBUG_OBJECTS=n.
Fixes: 025f89b01e ("drm/i915: replace select with dependency for visible DEBUG_OBJECTS")
Cc: Julian Braha <julianbraha@gmail.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260506101957.202271-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
-----BEGIN PGP SIGNATURE-----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=gvrF
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
-----BEGIN PGP SIGNATURE-----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=RBbh
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Link: https://patch.msgid.link/20260506110325.219675-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix issues in EFI graceful recovery on x86 introduced by changes to
the kernel mode FPU APIs
- I-cache coherency fixes for the LoongArch EFI stub
- Locking fix for EFI pstore
- Code tweak for efivarfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCafml9AAKCRAwbglWLn0t
XJSnAQD400URJjhvoFRAkGNEt+ETSGYU03s07wzv8efsfjLCyAEA9gRhsa3D0ArK
21zd5xeLHgeMhLCA5ZkO+HkhFsd8hQk=
=45fv
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix issues in EFI graceful recovery on x86 introduced by changes to
the kernel mode FPU APIs
- I-cache coherency fixes for the LoongArch EFI stub
- Locking fix for EFI pstore
- Code tweak for efivarfs
* tag 'efi-fixes-for-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: Restore IRQ state in EFI page fault handler
x86/efi: Fix graceful fault handling after FPU softirq changes
efi/libstub: Synchronize instruction cache after kernel relocation
efi/loongarch: Implement efi_cache_sync_image()
efi/libstub: Move efi_relocate_kernel() into its only remaining user
efi: pstore: Drop efivar lock when efi_pstore_open() returns with an error
efivarfs: use QSTR() in efivarfs_alloc_dentry
Another batch of fixes, plus a couple of quirks (mostly AMD ones, as has
been the case recently). All driver changes, including fixes for the
KUnit tests for the Cirrus drivers that could cause memory corruption.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmn7Sq0ACgkQJNaLcl1U
h9B/xwf5ATCpvmEqNXRd2OY/X4N6wDmZHhghEUTqdvKtNyfdAdB73WThlJOlw3p7
yGbtLZe3rUdRy2i7xSpc2gaihNqnLdE1FRmybQEfwWjRPDGJ5fQzcYA79PiPi+Zj
9tw85vJMG679r2PI7X7Ta0PhSEoL+glj6YJ0GtAzsnVkeHiWQz/g7pLFSBbm3EMT
AFBmZSDzfAOJA0ZYpxtiWcdkOh6zpEs8Kj5Fi92szhT6BDd/F1c9yTF5XxHSmqKO
6Mc0Z1tmowPduN2Yf+skOfg/lCuYRyrKLkqJ3+DRbLUP/t2Q3KbAHxb28ui6fXco
r2xNdSG6jQ3lwcRw7eLqRmAgMqjtKg==
=DaNt
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
Another batch of fixes, plus a couple of quirks (mostly AMD ones, as has
been the case recently). All driver changes, including fixes for the
KUnit tests for the Cirrus drivers that could cause memory corruption.
The company name "QiHeng Electronics" is incorrect.
The correct legal name is "Nanjing Qinheng Microelectronics Co., Ltd.".
Update the module description accordingly.
Signed-off-by: Jiawei Liu <ljw@wch.cn>
Link: https://patch.msgid.link/20260506062412.371034-1-ljw@wch.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify all CPUID call sites which implicitly include any of the CPUID
headers to explicitly include them instead.
For KVM's reverse_cpuid.h, just include <asm/cpuid/types.h> since it
references the CPUID_EAX..EDX symbols without using the CPUID APIs.
Note, this allows removing the inclusion of <asm/cpuid/api.h> from within
<asm/processor.h> next. That allows the CPUID API headers to include
<asm/processor.h> without introducing a circular dependency.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20260327021645.555257-1-darwi@linutronix.de
The wrong index is assigned to pmh0101 ldo16, which results incorrect
rpmh resource being used when the regulator device is voted. Fix it.
Fixes: 65efe5404d ("regulator: rpmh-regulator: Add RPMH regulator support for Glymur")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-fix_pmh0101_ldo16_index-v1-1-cdc8708b01f4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
Two patches to fix cleanup during driver remove() and the error path
of probe().
The main purpose is to fix cleanup of the workqueue.
The error path in cs35l56_common_probe() should call destroy_workqueue()
on the workqueue that was created by cs35l56_dsp_init().
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505161124.3621000-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Manually call snd_soc_unregister_component() from cs35l56_remove()
instead of using devres cleanup. This ensures that the component is
destroyed before cs35l56_remove() starts cleanup of anything the
component code could be using.
Devres cleanup happens after the driver remove() callback, so if
snd_soc_register_component() is used, it will not be destroyed until
after cs35l56_remove() has returned. But there is some cleanup that
must be done in cs35l56_remove(), or wrapped in a custom devres
cleanup handler to ensure correct ordering. The simplest option is
to call snd_soc_unregister_component() at the start of cs35l56_remove().
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Closes: https://sashiko.dev/#/patchset/20260501103002.2843735-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505161124.3621000-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add per-stream fade controls for the Tegra mixer to allow
independently configuring target gain and fade duration for each of
the 10 input streams (RX1 through RX10).
The following controls are added per stream:
"RXn Fade Duration" - fade duration in samples (N3 parameter)
"RXn Fade Gain" - target gain level for fade
A strobe control commits all pending fade configurations:
"Fade Switch" - 1 = apply staged gain/duration and start fades
0 = disable sample count for all fading streams
A read-only status control reports per-stream fade state:
"Fade Status" - per-stream state for all 10 RX inputs
0 = idle, 1 = active
Usage example (fade 2 streams simultaneously):
amixer -c <card> cset name="RX1 Fade Duration" 1024
amixer -c <card> cset name="RX1 Fade Gain" 12000
amixer -c <card> cset name="RX2 Fade Duration" 2048
amixer -c <card> cset name="RX2 Fade Gain" 15000
amixer -c <card> cset name="Fade Switch" 1
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260506102032.1644851-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 3dae09de40 ("livepatch: Add stack_order sysfs attribute"),
merged in v6.14, introduced a new sysfs attribute.
In order to run the selftests on older kernels, check if given kernel
has support for the attribute. If the attribute is not supported, skip
the checks.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-6-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
