The commit adb68ed26a ("livepatch: Add "replace" sysfs attribute"),
merged in v6.11, introduced a new sysfs attribute.
In order to run the selftests on older kernels, check if given kernel
has support for the attribute. If the attribute is not supported, skip
the checks.
While at it, create a local variable to hold the module name to be
tested, instead of overwriting MOD_LIVEPATCH.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-5-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The commit bb26cfd9e7
("livepatch: add sysfs entry "patched" for each klp_object") was merged
in v6.1, introducing a new sysfs attribute.
In order to run the selftests on older kernels, check if given kernel
has support for the attribute. If the attribute is not supported, skip
the checks.
Along with this change, use MOD_LIVEPATCH2 variable instead of
reassigning a new value to MOD_LIVEPATCH, and also use the variable
names in the check_result, to avoid using the module names.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-4-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Returns true if the livepatch sysfs attribute exists, and false otherwise.
This new function will be used in the next patches.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-3-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Older kernels don't support true/false for boolean module parameters
because they lack commit 0d6ea3ac94
("lib/kstrtox.c: add "false"/"true" support to kstrtobool()"). Replace
true/false by y/n so the test module can be loaded on older kernels.
No functional changes.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-2-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Older kernels that lack CONFIG_ARCH_HAS_SYSCALL_WRAPPER config don't
have any prefixes for their syscalls. The same applies to current
powerpc and loongarch, covering all currently supported architectures
that support livepatch.
The other supported architectures have specific prefixes, so error out
when a new architecture adds livepatch support with wrappers but didn't
update the test to include it.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260504-lp-tests-old-fixes-v5-1-0be26d94ab9a@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update data-width property for dmac to 3 which is 64 bits to match value
configured in the hardware register.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The new SCLP action qualifier 4 is used by user-space code to provide
NVMe SMART log data to the platform.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
sve_set_common() is the backend for PTRACE_SETREGSET(NT_ARM_SVE) and
PTRACE_SETREGSET(NT_ARM_SSVE). Every write in the function operates on
the tracee (target) - except a single memset that uses current instead,
zeroing the tracer's saved V0-V31 / FPSR / FPCR shadow on every ptrace
SETREGSET call.
The memset is meant to give the tracee a defined zero register image
before the user-supplied payload is copied in (for partial writes,
header-only writes, and FPSIMD<->SVE format switches). Aiming it at
current both denies the tracee that clean slate and silently corrupts
the tracer.
The corruption of the tracer's saved FPSIMD state is not always
observable. Where the tracer's state is live on a CPU, this may be
reused without loading the corrupted state from memory, and will
eventually be written back over the corrupted state. Where the tracer's
state is saved in SVE_PT_REGS_SVE format, only the FPSR and FPCR are
clobbered, and the effective copy of the vectors is in the task's
sve_state.
Reproducible on an arm64 kernel with SVE: a single-threaded tracer that
loads a known pattern into V0-V31, issues PTRACE_SETREGSET(NT_ARM_SVE)
on a child, and reads V0-V31 back observes them all zeroed within tens
of thousands of iterations when a sibling thread keeps stealing the
FPSIMD CPU binding.
Fixes: 316283f276 ("arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
D1 high speed timer differs from existing timer-sun5i by register base
offset.
Add sunxi quirks to handle D1 specific offset.
Add D1 compatible string to OF match table.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260428-h616-t113s-hstimer-v3-2-7e02178a93ee@mmpsystems.pl
D1 is similar to existing sun5i, but with different register offsets.
H616 uses same offsets as D1.
Add allwinner,sun20i-d1-hstimer
Add allwinner,sun50i-h616-hstimer with fallback to
allwinner,sun20i-d1-hstimer
Extend schema condition for interrupts to cover D1 compatible variant.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-h616-t113s-hstimer-v3-1-7e02178a93ee@mmpsystems.pl
io_uring_enter() with IORING_ENTER_ABS_TIMER takes an absolute
timespec from the caller via ext_arg->ts. It arms an ABS mode
hrtimer in __io_cqring_wait_schedule(). The conversion path in
io_uring/wait.c parses ext_arg->ts inline rather than going
through io_parse_user_time(). It therefore does not pick up the
time namespace conversion added by the previous patch.
Apply timens_ktime_to_host() to the parsed time on the
IORING_ENTER_ABS_TIMER branch. This mirrors the IORING_TIMEOUT_ABS
fix in io_parse_user_time(). Use ctx->clockid as the clock id.
ctx->clockid is set either at ring creation or via
IORING_REGISTER_CLOCK.
timens_ktime_to_host() is a no-op for clocks not affected by time
namespaces. It is also a no-op for callers in the initial time
namespace. The fast path is unchanged.
Reproducer: in unshare --user --time, with a -10s monotonic
offset, call io_uring_enter with min_complete=1,
IORING_ENTER_ABS_TIMER, and ts = now + 1s. The call returns
-ETIME after <1ms instead of after the expected ~1s.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260504153755.1293932-3-maoyi.xie@ntu.edu.sg
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring's IORING_OP_TIMEOUT and IORING_OP_LINK_TIMEOUT accept a
timespec from the caller via io_parse_user_time(). With
IORING_TIMEOUT_ABS, the timestamp is an absolute deadline on the
selected clock. The clock is CLOCK_MONOTONIC by default.
CLOCK_BOOTTIME and CLOCK_REALTIME are also selectable.
A submitter inside a CLONE_NEWTIME time namespace observes
CLOCK_MONOTONIC and CLOCK_BOOTTIME shifted by the namespace's
offsets relative to the host. Every other ABS timer interface in
the kernel converts the caller's absolute time to host view via
timens_ktime_to_host() before arming an hrtimer:
kernel/time/posix-timers.c -- timer_settime(TIMER_ABSTIME)
kernel/time/posix-stubs.c -- clock_nanosleep(TIMER_ABSTIME)
kernel/time/alarmtimer.c -- alarm_timer_nsleep(TIMER_ABSTIME)
fs/timerfd.c -- timerfd_settime(TFD_TIMER_ABSTIME)
io_parse_user_time() does not. As a result, an absolute timeout
submitted from within a time namespace is interpreted in host
view. That is generally a different point in time. It may already
be in the past, causing the timer to fire immediately, or far in
the future, causing the timer not to fire when expected.
Reproducer: in unshare --user --time, with a -10s monotonic
offset, submit IORING_OP_TIMEOUT with IORING_TIMEOUT_ABS and
deadline = now + 1s. The CQE is delivered after <1ms instead of
the expected ~1s.
Apply timens_ktime_to_host() to the parsed time when
IORING_TIMEOUT_ABS is set. Split the existing clock id resolver
in io_timeout_get_clock() into a flags only helper
io_flags_to_clock(), so io_parse_user_time() can resolve the
clock without a struct io_timeout_data.
timens_ktime_to_host() is a no-op for clocks not affected by time
namespaces, e.g. CLOCK_REALTIME. It is also a no-op for callers
in the initial time namespace. The fast path is unchanged.
SQPOLL is also covered. The SQPOLL kernel thread is created via
create_io_thread() with CLONE_THREAD and no CLONE_NEW* flag.
copy_namespaces() therefore shares the submitter's nsproxy by
reference. Inside the SQPOLL kthread, current->nsproxy->time_ns
is the submitter's time_ns. timens_ktime_to_host() resolves
correctly.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260504153755.1293932-2-maoyi.xie@ntu.edu.sg
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add documentation for AMD ISP 4 and describe the main components
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add debug fs for isp4 driver and add more detailed descriptive error info
to some of the log message
Co-developed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Isp video implements v4l2 video interface and supports NV12 and YUYV. It
manages buffers, pipeline power and state. Cherry-picked Sultan's DMA
buffer related fix from branch v6.16-drm-tip-isp4-for-amd on
https://github.com/kerneltoast/kernel_x86_laptop.git
Co-developed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Isp4 sub-device is implementing v4l2 sub-device interface. It has one
capture video node, and supports only preview stream. It manages firmware
states, stream configuration. Add interrupt handling and notification for
isp firmware to isp-subdevice.
Co-developed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
ISP firmware controls ISP HW pipeline using dedicated embedded processor
called ccpu. The communication between ISP FW and driver is using commands
and response messages sent through the ring buffer. Command buffers support
either global setting that is not specific to the stream and support stream
specific parameters. Response buffers contain ISP FW notification
information such as frame buffer done and command done. IRQ is used for
receiving response buffer from ISP firmware, which is handled in the main
isp4 media device. ISP ccpu is booted up through the firmware loading
helper function prior to stream start. Memory used for command buffer and
response buffer needs to be allocated from amdgpu buffer manager because
isp4 is a child device of amdgpu.
Co-developed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Low level functions for accessing the registers and mapping to their
ranges. This change also includes register definitions for ring buffer
used to communicate with ISP Firmware. Ring buffer is the communication
interface between driver and ISP Firmware. Command and responses are
exchanged through the ring buffer.
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
AMD isp4 capture is a v4l2 media device which implements media controller
interface. It has one sub-device (AMD ISP4 sub-device) endpoint which can
be connected to a remote CSI2 TX endpoint. It supports only one physical
interface for now. Also add ISP4 driver related entry info into the
MAINTAINERS file
Co-developed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
Signed-off-by: Bin Du <Bin.Du@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
ublk_validate_params() checks logical_bs_shift is within
[9, PAGE_SHIFT] but has no upper bound for physical_bs_shift,
io_min_shift, or io_opt_shift. A malicious userspace can set any
of these to a large value (e.g., 44), causing undefined behavior
from `1 << shift` in ublk_ctrl_start_dev() since the result is
stored in 32-bit unsigned int.
Cap all three at ilog2(SZ_256M) (28). 256M is big enough to cover
all practical block sizes, and originates from the maximum physical
block size possible in NVMe (lba_size * (1 + npwg), where npwg is
16-bit).
Also zero out ub->params with memset() when copy_from_user() fails
or ublk_validate_params() returns error, so that no stale or partial
params survive for a subsequent START_DEV to consume.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260506082238.22363-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Insufficient data is exported to allow direct access to TPMI registers
through MMIO. On non-partitioned systems domain_id can be used both for
mapping CPUs to their compute die IDs and for mapping die indices to
their MMIO memory blocks presented to userspace via TPMI debugfs.
However on partitioned systems the debugfs association doesn't work
anymore. This is due to how TPMI partitioning influences domain_id
calculation. The previous association is lost on partitioned systems in
order to keep using domain_id for mapping CPUs to compute dies.
Expose the instance ID in sysfs that's unique in the scope of one TPMI
partition (and hence one TPMI device). It's a physical index into mapped
MMIO blocks and can be used by userspace to figure out how to directly
access TPMI registers.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/b9ae8d5f1ab86bcdb1a8636fa48865a9e49e2e21.1775665057.git.m.wieczorretman@pm.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The "instance" word has a specific meaning in TPMI. It is a physical
index related to compute dies and IO dies present on a single TPMI
partition (which is also a single TPMI device). It's used for mapping
MMIO blocks for direct TPMI register access.
The currently used "instance_id" uncore_data struct field is a
sequentially generated value that's used for appending to uncore
directories inside the /sys/devices/system/cpu/intel_uncore_frequency
directory. It has no relation to the physical TPMI elements.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/4d983157199cf0e163597df254e2dc629878b818.1775665057.git.m.wieczorretman@pm.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The LVDS controller was hardcoded to JEIDA mapping, which leads to
distorted output on panels expecting VESA mapping.
Update the driver to dynamically select the appropriate mapping and
pixel size based on the panel's advertised media bus format. This
ensures compatibility with both JEIDA and VESA displays.
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250625-microchip-lvds-v6-3-7ce91f89d35a@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Drop the unused drm_panel field from the mchp_lvds structure, and remove
the unnecessary port device node lookup, as devm_drm_of_get_bridge()
already performs the required checks internally.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250625-microchip-lvds-v6-1-7ce91f89d35a@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
This is already claimed for VHT and HE, so it doesn't really
make sense to not claim it for HT, and this causes sigma-dut
failures since it assumes VHT support implies HT support.
Link: https://patch.msgid.link/20260506093231.155762-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NAN_DATA interface simulation support by adding it to the
supported interface types. This completes the NAN Data Path
simulation introduced in the previous patches.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.d4bd95959bfa.I450087714bd55189242ab6a72ce6650be36edbcb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for transmitting multicast data frames. These
frames can be transmitted when all the peer NDI stations
on the interface are available at the current slot.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.0af7e24f0df3.I3c2de3e456ae092c939e6bfd3d30960fbf2fbeaa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise NL80211_EXT_FEATURE_SECURE_NAN to indicate support for
NAN Pairing, enabling peer authentication and secure data path
establishment.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.d3bcc26b4525.I6993cc70c43579694ffd429f1afb971a73db2ae4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement TX and RX path handling for NAN Data Path (NDP) frames,
enabling data communication between NAN peers during scheduled
availability windows.
TX path:
- Select TX channel based on current time slot: use DW channel
during Discovery Windows, or FAW channel from local
schedule during Further Availability Windows.
- Verify peer availability before transmission by checking committed
DW schedule or FAW of the peer schedule.
RX path:
- Extend NAN receive filtering to handle NAN_DATA interface frames.
- Accept incoming frames during FAW slots when channel matches local
schedule.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.155252ebc72b.Ic210f6c095c6ff372941bc8c77ee9c8c37d0356c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- NAN switches between bands/channels per its schedule, so mac80211
rate control can't work, set HAS_RATE_CONTROL instead.
- Skip rate control checks for NAN interfaces in
mac80211_hwsim_sta_rc_update() as it's not relevant.
- Move set_rts_threshold stub to HWSIM_COMMON_OPS and return 0 instead
of -EOPNOTSUPP to prevent failures in non-MLO tests that set RTS
threshold (hwsim ignores the use_rts instruction from mac80211
anyway).
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.216e68be61ac.If9ef94a12cec8dfc55416afaf745d6e5025a5ec9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement mac80211 schedule callbacks for NAN Data Path support:
- Track local schedule via BSS_CHANGED_NAN_LOCAL_SCHED, caching
the channel for each 16TU time slot.
- Copy peer schedule to driver-private storage in
nan_peer_sched_changed callback for use in TX availability
decisions.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.f3ad9e3dc9d4.I75cf3555b7506d5b8bb30e70a0f3721ab73477cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add static HT, VHT and HE PHY capabilities to the NAN capabilities
structure. These are based on the existing band capability structures
and initialization in mac80211_hwsim.
The NAN PHY capabilities are used by mac80211 and nl80211 to
advertise device capabilities for NAN data interfaces.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.2c94c156f05d.I539fab4adf2eb43bfec27006f7529b926e5208ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add all the handling to do NAN synchronization on 2.4 GHz including
sending out beacons. With this, the mac80211_hwsim NAN device also works
when used in conjunction with an external medium simulation.
Note that the TSF sync is not ideal in case of an external medium
simulation. This is because the mactime for received frames needs to be
estimated and the simulation may not update the timestamp of beacons
to the actual time that the frame was transmitted.
The implementation has an initial short phase where it scans for
clusters. This facilitates cluster joining and avoids creating a new
cluster immediately, which would result in two cluster join
notifications. It does not scan otherwise and will only see another
cluster appearing if a discovery beacon happens to be sent during the
2.4 GHz discovery window (DW).
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.7d21c3cdc565.I98b6c15eadefd6d123658294ef1a0cd3c2ce3054@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To implement NAN synchronization in hwsim, the TSF needs to be adjusted
regularly from the RX path. Add a spinlock so that this can be done in a
safe manner.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.18f36f264eb9.I0da5477220b896e2177bd521f7d9a8f2595631e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This moves the NAN receive into the main code and changes it so that
frame RX only happens when the device is active on the channel. This
limits RX to the DW slots as there is currently no datapath.
With this the globally stored channel is obsolete, remove it.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.8cf4a67d3436.Ife07cf4ae8a2d59766356398163f7ee8d734bd6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Frames submitted on the NAN device interface should only be transmitted
during one of the discovery windows (DWs). It is assumed that software
submits frames from the DW end notifications for the next DW period.
Simulate this behaviour by checking that we are currently in a DW before
transmitting from ieee80211_hwsim_wake_tx_queue. As frames will be
queued up at the start of a DW, wake the management TX queue every time
a DW is started. Do so with a randomized offset just to avoid every
client transmitting at the same time.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.f3456f159655.Id6780e2f7f7cab03264299b7d696ba5b1269e451@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The support for NAN DATA was added for single radio devices only. For
example, checking the interface combinations is done for a single radio.
Prevent registration with NAN DATA interface type for multi radio
devices.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505194607.ff87e6fcff56.If201aa58119d2a6b08223ecb63bc2869f63ff5a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tell driver authors to use pm_runtime_get_if_active() instead of
pm_runtime_get_if_in_use() to check the device's power state in the s_ctrl
callback. pm_runtime_get_if_active() is the right function to use here
since it returns non-zero if the device is powered on rather than its
PM runtime usage_count is non-zero.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This reverts commit e3953ff665.
Seems to have been accidentally pushed without mandatory review.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Acked-by: Maxime Ripard <mripard@kernel.org> #irc
NL80211_CMD_GET_SCAN is implemented as a multi-call dumpit. The first
invocation of nl80211_prepare_wdev_dump() validates the requested wdev
against the caller's netns via __cfg80211_wdev_from_attrs(). Subsequent
invocations look up the same wiphy by its global index and do not check
that the wiphy is still in the caller's netns.
Add the same filter to the continuation path. If the wiphy's netns no
longer matches the caller's, return -ENODEV and the netlink dump
machinery terminates the walk cleanly.
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-3-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_WIPHY_NETNS dispatches with GENL_UNS_ADMIN_PERM, which
verifies that the caller has CAP_NET_ADMIN for the source netns. It
doesn't verify that the caller has CAP_NET_ADMIN over the target netns
selected by NL80211_ATTR_NETNS_FD or NL80211_ATTR_PID.
This diverges from the convention enforced in
net/core/rtnetlink.c::rtnl_get_net_ns_capable():
/* For now, the caller is required to have CAP_NET_ADMIN in
* the user namespace owning the target net ns.
*/
if (!sk_ns_capable(sk, net->user_ns, CAP_NET_ADMIN))
return ERR_PTR(-EACCES);
A user with CAP_NET_ADMIN in their own user namespace can therefore
push a wiphy into an arbitrary netns (including init_net) over which
they have no privilege.
Mirror the rtnetlink convention by requiring CAP_NET_ADMIN in the
target netns before calling cfg80211_switch_netns().
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-2-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is documented as a u8 and has a policy of NLA_U8, but uses
nla_get_u32() which means it's completely broken on big-endian.
Fix it to use nla_get_u8().
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://patch.msgid.link/20260505113837.260159-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cc: stable@vger.kernel.org
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
