commit e08e49d986 upstream.
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.
Fixes: c4aec299fa ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 170d1a3738 upstream.
The vma start address should be substracted from the buffer's user data
address and not the other way around.
Cc: Tiffany Y. Yang <ynaffit@google.com>
Cc: stable <stable@kernel.org>
Fixes: 162c797314 ("binder: avoid user addresses in debug logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Tiffany Y. Yang <ynaffit@google.com>
Link: https://lore.kernel.org/r/20250325184902.587138-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[cmllamas: fix conflicts due to alloc->buffer renaming]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1149719442 upstream.
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f406005e16 upstream.
During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.
This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.
Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2dd1c1eee3 ]
Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are
extracted from Windows driver inf file for various types of
WoS (Windows on Snapdragon) laptop.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") makes the grammar of MODULE_IMPORT_NS and EXPORT_SYMBOL_NS
different between the stable branches and the mainline. But when
the commit 955f9ede52 ("bpf: Add namespace to BPF internal symbols")
was backported from mainline, only EXPORT_SYMBOL_NS instances are
adapted, leaving the MODULE_IMPORT_NS instance with the "new" grammar
and causing the module fails to build:
ERROR: modpost: module bpf_preload uses symbol bpf_link_get_from_fd from namespace BPF_INTERNAL, but does not import it.
ERROR: modpost: module bpf_preload uses symbol kern_sys_bpf from namespace BPF_INTERNAL, but does not import it.
Reported-by: Mingcong Bai <jeffbai@aosc.io>
Reported-by: Alex Davis <alex47794@gmail.com>
Closes: https://lore.kernel.org/all/CADiockBKBQTVqjA5G+RJ9LBwnEnZ8o0odYnL=LBZ_7QN=_SZ7A@mail.gmail.com/
Fixes: 955f9ede52 ("bpf: Add namespace to BPF internal symbols")
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b0cab327e upstream.
req_get_ioprio looks at req->bio to find the I/O priority, which is not
set when completing bios that the driver fully iterated through.
Stash away the dd_per_prio in the elevator private data instead of looking
it up again to optimize the code a bit while fixing the regression from
removing the per-request ioprio value.
Fixes: 6975c1a486 ("block: remove the ioprio field from struct request")
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241126102136.619067-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 398898f9cc upstream.
Currently we get the warning:
"GICv3: [Firmware Bug]: GICR region 0x0000000001900000 has
overlapping address"
As per TRM GICD is 64 KB. Fix it by correcting the size of GICD.
Cc: stable@vger.kernel.org
Fixes: 9cc161a450 ("arm64: dts: ti: Refactor J784s4 SoC files to a common file")
Link: https://lore.kernel.org/r/20250218052248.4734-1-j-keerthy@ti.com
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 429a98abfc upstream.
We recently added some locking to this function but this error path
was accidentally missed. Unlock before returning.
Fixes: ec27386de2 ("usb: typec: class: Fix NULL pointer access")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/Z_44tOtmml89wQcM@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55c78035a1 upstream.
Similar to GCOV, KCOV can leave behind dead code and undefined behavior.
Warnings related to those should be ignored.
The previous commit:
6b023c7842 ("objtool: Silence more KCOV warnings")
... only did so for CONFIG_CGOV_KERNEL. Also do it for CONFIG_KCOV, but
for real this time.
Fixes the following warning:
vmlinux.o: warning: objtool: synaptics_report_mt_data: unexpected end of section .text.synaptics_report_mt_data
Fixes: 6b023c7842 ("objtool: Silence more KCOV warnings")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/a44ba16e194bcbc52c1cef3d3cd9051a62622723.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503282236.UhfRsF3B-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d7597749f upstream.
When KCOV or GCOV is enabled, dead code can be left behind, in which
case objtool silences unreachable and undefined behavior (fallthrough)
warnings.
Fallthrough warnings, and their variant "end of section" warnings, were
silenced with the following commit:
6b023c7842 ("objtool: Silence more KCOV warnings")
Another variant of a fallthrough warning is a jump to the end of a
function. If that function happens to be at the end of a section, the
jump destination doesn't actually exist.
Normally that would be a fatal objtool error, but for KCOV/GCOV it's
just another undefined behavior fallthrough. Silence it like the
others.
Fixes the following warning:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
Fixes: 6b023c7842 ("objtool: Silence more KCOV warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/08fbe7d7e1e20612206f1df253077b94f178d93e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e3a28793d upstream.
A Short Packet event before the last TRB of a TD is followed by another
event on the final TRB on spec-compliant HCs, which is most of them.
A 'last_td_was_short' flag was added to know if a TD has just completed
as Short Packet and another event is to come. The flag was cleared after
seeing the event (unless no TDs are pending, but that's a separate bug)
or seeing a new TD complete as something other than Short Packet.
A rework replaced the flag with an 'old_trb_comp_code' variable. When
an event doesn't match the pending TD and the previous event was Short
Packet, the new event is silently ignored.
To preserve old behavior, 'old_trb_comp_code' should be cleared at this
point, but instead it is being set to current comp code, which is often
Short Packet again. This can cause more events to be silently ignored,
even though they are no longer connected with the old TD that completed
short and indicate a serious problem with the driver or the xHC.
Common device classes like UAC in async mode, UVC, serial or the UAS
status pipe complete as Short Packet routinely and could be affected.
Clear 'old_trb_comp_code' to zero, which is an invalid completion code
and the same value the variable starts with. This restores original
behavior on Short Packet and also works for illegal Etron events, which
the code has been extended to cover too.
Fixes: b331a3d809 ("xhci: Handle spurious events on Etron host isoc enpoints")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250410151828.2868740-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26d7fb4fd4 upstream.
Commit 62baf70c32 caused the ANA log page to be re-read, even on
controllers that do not support ANA. While this should generally
harmless, some controllers hang on the unsupported log page and
never finish probing.
Fixes: 62baf70c32 ("nvme: re-read ANA log page after ns scan completes")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
[hch: more detailed commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b73c3ccdca upstream.
Commit e27fbe16af ("MIPS: cm: Detect CM quirks from device tree")
introduced
arch/mips/include/asm/mips-cm.h:119:13: error: ‘mips_cm_update_property’
defined but not used [-Werror=unused-function]
Fix this by making empty function implementation inline
Fixes: e27fbe16af ("MIPS: cm: Detect CM quirks from device tree")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38985a2568 upstream.
You can't pass uninitialized "ret" variables to cci_write(). It has to
start as zero.
Fixes: 4f0aeba4f1 ("media: i2c: imx214: Convert to CCI register access helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17ec3e71ba upstream.
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aec ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b46064a188 upstream.
It turns out that deferred default domain creation leaves a subtle
race window during iommu_device_register() wherein a client driver may
asynchronously probe in parallel and get as far as performing DMA API
operations with dma-direct, only to be switched to iommu-dma underfoot
once the default domain attachment finally happens, with obviously
disastrous consequences. Even the wonky of_iommu_configure() path is at
risk, since iommu_fwspec_init() will no longer defer client probe as the
instance ops are (necessarily) already registered, and the "replay"
iommu_probe_device() call can see dev->iommu_group already set and so
think there's nothing to do either.
Fortunately we already have the right tool in the right place in the
form of iommu_device_use_default_domain(), which just needs to ensure
that said default domain is actually ready to *be* used. Deferring the
client probe shouldn't have too much impact, given that this only
happens while the IOMMU driver is probing, and thus due to kick the
deferred probe list again once it finishes.
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Fixes: 98ac73f99b ("iommu: Require a default_domain for all iommu drivers")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e88b94c9b575034a2c98a48b3d383654cbda7902.1740753261.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1428a6109b upstream.
Commit c050f5e91b ("net: dsa: mv88e6xxx: Fill in STU support for all
supported chips") introduced STU methods, but did not add them to the
6320 family. Fix it.
Fixes: c050f5e91b ("net: dsa: mv88e6xxx: Fill in STU support for all supported chips")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae01ec007 upstream.
The atu_move_port_mask for 6341 family (Topaz) is 0xf, not 0x1f. The
PortVec field is 8 bits wide, not 11 as in 6390 family. Fix this.
Fixes: e606ca36bb ("net: dsa: mv88e6xxx: rework ATU Remove")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 2b27df6852.
For stable 6.12 it was misapplied to wrong entries of the
`mv88e6xxx_table` array: instead of the MV88E6320 and MV88E6321 entries
it was applied to the MV88E6240 and MV88E6352 entries.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66e1a88727 upstream.
To avoid using invalid USB device pointers after a Type-C partner
disconnects, this patch clears the pointers upon partner unregistration.
This ensures a clean state for future connections.
Cc: stable@vger.kernel.org
Fixes: 59de2a56d1 ("usb: typec: Link enumerated USB devices with Type-C partner")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250321143728.4092417-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d9b3f584 upstream.
When `jr3_pci_detach()` is called during device removal, it calls
`timer_delete_sync()` to stop the timer, but the timer expiry function
always reschedules the timer, so the synchronization is ineffective.
Call `timer_shutdown_sync()` instead. It does not matter that the timer
expiry function pointer is cleared, because the device is being removed.
Fixes: 07b509e658 ("Staging: comedi: add jr3_pci driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c2227656d upstream.
vmxnet3 driver's XDP handling is buggy for packet sizes using ring0 (that
is, packet sizes between 128 - 3k bytes).
We noticed MTU-related connectivity issues with Cilium's service load-
balancing in case of vmxnet3 as NIC underneath. A simple curl to a HTTP
backend service where the XDP LB was doing IPIP encap led to overly large
packet sizes but only for *some* of the packets (e.g. HTTP GET request)
while others (e.g. the prior TCP 3WHS) looked completely fine on the wire.
In fact, the pcap recording on the backend node actually revealed that the
node with the XDP LB was leaking uninitialized kernel data onto the wire
for the affected packets, for example, while the packets should have been
152 bytes their actual size was 1482 bytes, so the remainder after 152 bytes
was padded with whatever other data was in that page at the time (e.g. we
saw user/payload data from prior processed packets).
We only noticed this through an MTU issue, e.g. when the XDP LB node and
the backend node both had the same MTU (e.g. 1500) then the curl request
got dropped on the backend node's NIC given the packet was too large even
though the IPIP-encapped packet normally would never even come close to
the MTU limit. Lowering the MTU on the XDP LB (e.g. 1480) allowed to let
the curl request succeed (which also indicates that the kernel ignored the
padding, and thus the issue wasn't very user-visible).
Commit e127ce7699 ("vmxnet3: Fix missing reserved tailroom") was too eager
to also switch xdp_prepare_buff() from rcd->len to rbi->len. It really needs
to stick to rcd->len which is the actual packet length from the descriptor.
The latter we also feed into vmxnet3_process_xdp_small(), by the way, and
it indicates the correct length needed to initialize the xdp->{data,data_end}
parts. For e127ce7699 ("vmxnet3: Fix missing reserved tailroom") the
relevant part was adapting xdp_init_buff() to address the warning given the
xdp_data_hard_end() depends on xdp->frame_sz. With that fixed, traffic on
the wire looks good again.
Fixes: e127ce7699 ("vmxnet3: Fix missing reserved tailroom")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Andrew Sauber <andrew.sauber@isovalent.com>
Cc: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Martin Zaharinov <micron10@gmail.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250423133600.176689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec27386de2 upstream.
Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer
dereference. This patch adds a mutex to protect USB device pointers and
prevent this issue. The same mutex protects both the device pointers and
the partner device registration.
Cc: stable@vger.kernel.org
Fixes: 59de2a56d1 ("usb: typec: Link enumerated USB devices with Type-C partner")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250321143728.4092417-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7f2188d68 upstream.
The function bpf_test_init() now returns an error if user_size
(.data_size_in) is less than ETH_HLEN, causing the tests to
fail. Adjust the data size to ensure it meets the requirement of
ETH_HLEN.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121150643.671650-2-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 972bafed67 ("bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d124d984c8 upstream.
xdp_cpumap_attach, in its current form, only checks that an xdp cpumap
program can be executed, but not that it performs correctly the cpu
redirect as configured by userspace (bpf_prog_test_run_opts will return
success even if the redirect program returns an error)
Add a check to ensure that the program performs the configured redirect
as well. The check is based on a global variable incremented by a
chained program executed only if the redirect program properly executes.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-3-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5fbcf46ee upstream.
Current test only checks attach/detach on cpu map type program, and so
does not check that it can be properly executed, neither that it
redirects correctly.
Update the existing test to extend its coverage:
- keep the redirected program loaded
- try to execute it through bpf_prog_test_run_opts with some dummy
context
While at it, bring the following minor improvements:
- isolate test interface in its own namespace
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-2-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c7f2188d68 ("selftests/bpf: Adjust data size to have ETH_HLEN")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac8d16b2d3 upstream.
xdp_redir_prog currently redirects packets based on the entry at index 1
in cpu_map, but the corresponding test only manipulates the entry at
index 0. This does not really affect the test in its current form since
the program is detached before having the opportunity to execute, but it
needs to be fixed before being able improve the corresponding test (ie,
not only test attach/detach but also the redirect feature)
Fix this XDP program by making it redirect packets based on entry 0 in
cpu_map instead of entry 1.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-1-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2d873efd17 upstream
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3cd6a8056f upstream
Match the method name and the naming convention or address_space
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9f0902091c upstream
Mounting a filesystem that requires quota state changing will generate a
transaction.
We already check for a read-only device; we should do that for
norecovery too.
A quotacheck on a norecovery mount, and with the right log size, will cause
the mount process to hang on:
[<0>] xlog_grant_head_wait+0x5d/0x2a0 [xfs]
[<0>] xlog_grant_head_check+0x112/0x180 [xfs]
[<0>] xfs_log_reserve+0xe3/0x260 [xfs]
[<0>] xfs_trans_reserve+0x179/0x250 [xfs]
[<0>] xfs_trans_alloc+0x101/0x260 [xfs]
[<0>] xfs_sync_sb+0x3f/0x80 [xfs]
[<0>] xfs_qm_mount_quotas+0xe3/0x2f0 [xfs]
[<0>] xfs_mountfs+0x7ad/0xc20 [xfs]
[<0>] xfs_fs_fill_super+0x762/0xa50 [xfs]
[<0>] get_tree_bdev_flags+0x131/0x1d0
[<0>] vfs_get_tree+0x26/0xd0
[<0>] vfs_cmd_create+0x59/0xe0
[<0>] __do_sys_fsconfig+0x4e3/0x6b0
[<0>] do_syscall_64+0x82/0x160
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is caused by a transaction running with bogus initialized head/tail
I initially hit this while running generic/050, with random log
sizes, but I managed to reproduce it reliably here with the steps
below:
mkfs.xfs -f -lsize=1025M -f -b size=4096 -m crc=1,reflink=1,rmapbt=1, -i
sparse=1 /dev/vdb2 > /dev/null
mount -o usrquota,grpquota,prjquota /dev/vdb2 /mnt
xfs_io -x -c 'shutdown -f' /mnt
umount /mnt
mount -o ro,norecovery,usrquota,grpquota,prjquota /dev/vdb2 /mnt
Last mount hangs up
As we add yet another validation if quota state is changing, this also
add a new helper named xfs_qm_validate_state_change(), factoring the
quota state changes out of xfs_qm_newmount() to reduce cluttering
within it.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9e00163c31 upstream
If there is corrutpion on the filesystem andxfs_repair
fails to repair it. The last resort of getting the data
is to use norecovery,ro mount. But if the NEEDSREPAIR is
set the filesystem cannot be mounted. The flag must be
cleared out manually using xfs_db, to get access to what
left over of the corrupted fs.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18daa52418 upstream.
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-3-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc1771f718 upstream.
This reverts commit c0a40097f0.
Probing a device can take arbitrary long time. In the field we observed
that, for example, probing a bad micro-SD cards in an external USB card
reader (or maybe cards were good but cables were flaky) sometimes takes
longer than 2 minutes due to multiple retries at various levels of the
stack. We can not block uevent_show() method for that long because udev
is reading that attribute very often and that blocks udev and interferes
with booting of the system.
The change that introduced locking was concerned with dev_uevent()
racing with unbinding the driver. However we can handle it without
locking (which will be done in subsequent patch).
There was also claim that synchronization with probe() is needed to
properly load USB drivers, however this is a red herring: the change
adding the lock was introduced in May of last year and USB loading and
probing worked properly for many years before that.
Revert the harmful locking.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-1-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 951a04ab3a ]
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c235a71322 ]
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d9bff4cf8)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 447fab3095 ]
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b2ae7d492)
Signed-off-by: Sasha Levin <sashal@kernel.org>
