Commit graph

210,168 commits

Author SHA1 Message Date
Nathan Holstein
51893f88dd Bluetooth: Fix bug with ERTM minimum packet length
ERTM and streaming mode L2CAP sockets have no minimum packet length. Only
basic mode connections have minimum length.

Instead, validate the packet containing all necessary control, FCS,
and SAR fields.

The patch fixes the drop of valid packets with length lower than 4.

Signed-off-by: Nathan Holstein <ngh@isomerica.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
João Paulo Rechi Vita
bfbacc1155 Bluetooth: Fix SREJ_QUEUE corruption in L2CAP
Since all TxSeq values are modulo, we shall not compare them directly. We
have to compare their offset inside the TxWindow instead.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
6e2b6722ab Bluetooth: Fix bug in l2cap_ertm_send() behavior
This patch makes l2cap_ertm_send() similar to the Send-Data action of
the ERTM spec. We shall not check for RemoteBusy or WAIT_F state
inside l2cap_ertm_send().

Such checks were causing a bug in the retransmission logic of ERTM and
making ERTM stalls until the ACL is dropped.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
bc1b1f8bee Bluetooth: Only check SAR bits if frame is an I-frame
The SAR bits doesn't make sense for an S-frame. It doesn't use SAR.

Checking SAR for a S-frames can lead to L2CAP errors, it could close
the channel with an invalid packet length, since we was removing the 2
of the of any frame that match SAR start bits, without check if it is
an I-frame.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
8ff50ec04a Bluetooth: Fix bug with ERTM vars increment
All ERTM operations regarding the txWindow should be modulo 64,
otherwise we confuse the ERTM logic and connections will break.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
f6337c7711 Bluetooth: Fix drop of packets with invalid req_seq/tx_seq
We shall not use an unsigned var since we are expecting negatives value
there. Using unsigned causes ERTM connection to close due to invalid
ReqSeq numbers.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
0b31c85ce7 Bluetooth: Remove L2CAP Extended Features from Kconfig
This reverts commit 84fb0a6334 which adds
the L2CAP Extended Features to the Kconfig, that is actually not needed.
One can use other mechanisms to enable L2CAP Extended Features.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
fd059b9bd0 Bluetooth: Remove max_tx and tx_window module paramenters from L2CAP
We don't need these parameters anymore since we have socket options for
them.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Linus Torvalds
cd5b8f8755 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix 'driver ... did not release config properly' warning
2010-07-21 09:31:15 -07:00
Linus Torvalds
052a1cdbfa Merge branch 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  mm: add context argument to shrinker callback to remaining shrinkers
2010-07-21 09:30:59 -07:00
Linus Torvalds
84b37df419 Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Select wm_hubs automatically for WM8994
  ASoC: Remove duplicate AUX definition from WM8776
  ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
  ASoC: wm8727: add a missing return in wm8727_platform_probe
  ASoC: fsi: fixup wrong value setting order of TDM
  ASoC: fsi: fixup clock inversion operation
2010-07-21 09:29:39 -07:00
Linus Torvalds
95977d0ef2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  math-emu: correct test for downshifting fraction in _FP_FROM_INT()
  perf: Add DWARF register lookup for sparc
  MAINTAINERS: Add SBUS driver path to sparc entry.
  drivers/sbus: Remove unnecessary casts of private_data
  sparc: remove homegrown L1_CACHE_ALIGN macro
  sparc64: fix the build error due to smp_kgdb_capture_client()
  sparc64: Fix maybe_change_configuration() PCR setting.
  arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference
  sparc64: Update defconfig.
  sunsu: Fix use after free in su_remove().
  sunserial: Don't call add_preferred_console() when console= is specified.
  sparc32: Kill none_mask, it's bogus.
2010-07-21 09:28:50 -07:00
Linus Torvalds
a4ce96ac35 Fix up trivial spelling errors ('taht' -> 'that')
Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.

Reported-by: Lucas <canolucas@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-21 09:25:42 -07:00
KOSAKI Motohiro
6c9c0fd062 ACPI: fix unused function warning
CONFIG_ACPI_PROCFS=n:

drivers/acpi/processor_idle.c:83: warning: 'us_to_pm_timer_ticks' defined but not used.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-21 11:30:09 -04:00
Mike Frysinger
9849ed4d72 tracing/documentation: Document dynamic ftracer internals
Add more details to the dynamic function tracing design implementation.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <1279610015-10250-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-21 11:00:25 -04:00
KOSAKI Motohiro
ef710e100c tracing: Shrink max latency ringbuffer if unnecessary
Documentation/trace/ftrace.txt says

  buffer_size_kb:

        This sets or displays the number of kilobytes each CPU
        buffer can hold. The tracer buffers are the same size
        for each CPU. The displayed number is the size of the
        CPU buffer and not total size of all buffers. The
        trace buffers are allocated in pages (blocks of memory
        that the kernel uses for allocation, usually 4 KB in size).
        If the last page allocated has room for more bytes
        than requested, the rest of the page will be used,
        making the actual allocation bigger than requested.
        ( Note, the size may not be a multiple of the page size
          due to buffer management overhead. )

        This can only be updated when the current_tracer
        is set to "nop".

But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.

Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.

That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.

Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.

This patch shrink buffer size of the max latency buffer if
unnecessary.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-21 10:20:17 -04:00
Michal Marek
b003afe32f kbuild: Fix make rpm
make rpm was broken by commit 0915512:
make clean
set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl
/bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only >
/usr/src/iwlwifi-2.6/.scmversion
cat: .scmversion: input file is output file
make[1]: *** [rpm] Error 1

Reported-and-tested-by: "Zheng, Jiajia" <jiajia.zheng@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-21 16:06:05 +02:00
Jiaying Zhang
fb5ffb0e16 quota: Change quota error message to print out disk and function name
The current quota error message doesn't always print the disk name, so
it is hard to identify the "bad" disk when quota error happens.

This patch changes the standardized quota error message to print out disk name
and function name. It also uses a combination of cpp macro and inline function
to provide better type checking and to lower the text size of the message.

[Jan Kara: Export __quota_error]

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:05:58 +02:00
Jan Kara
0197195258 MAINTAINERS: Update entries of ext2 and ext3
I often handle ext2 and ext3 patches these days so add myself to MAINTAINERS.

CC: Andrew Morton <akpm@linux-foundation.org>
CC: Andreas Dilger <andreas.dilger@oracle.com>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:04:59 +02:00
Andreas Dilger
3c373a5f93 MAINTAINERS: Update address of Andreas Dilger
Signed-off-by: Andreas Dilger <andreas.dilger@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:04:42 +02:00
Jan Kara
f25f624263 ext3: Avoid filesystem corruption after a crash under heavy delete load
It can happen that ext3_free_branches calls ext3_forget() for an indirect block
in an earlier transaction than a transaction in which we clear pointer to this
indirect block. Thus if we crash before a transaction clearing the block
pointer is committed, we will see indirect block pointing to already freed
blocks and complain during orphan list cleanup.

The fix is simple: Make sure ext3_forget() is called in the transaction
doing block pointer clearing.

This is a backport of an ext4 fix by Amir G. <amir73il@users.sourceforge.net>

Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:04:26 +02:00
Christoph Hellwig
4c4d390122 ext3: remove vestiges of nobh support
The nobh option was only supported for writeback mode, but given that all
write paths (except mmapped writed) actually create buffer heads, it
effectively was a no-op already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:47 +02:00
Andi Kleen
0411ba7902 ext3: Fix set but unused variables
[tytso@mit.edu: Fix compilation with CONFIG_JBD_DEBUG enabled]

Acked-by: tytso@mit.edu
cc: linux-ext4@vger.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:47 +02:00
Christoph Hellwig
189eef59e7 quota: clean up quota active checks
The various quota operations check for any quota beeing active on
a superblock, and the inode not having the noquota flag.

Merge these two checks into a dquot_active check and move that
into dquot.c as that's the only place where it's needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:47 +02:00
Christoph Hellwig
ade7ce31c2 quota: Clean up the namespace in dqblk_xfs.h
Almost all identifiers use the FS_* namespace, so rename the missing few
XFS_* ones to FS_* as well.  Without this some people might get upset
about having too many XFS names in generic code.

Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:46 +02:00
Dmitry Monakhov
7af9cce8ae quota: check quota reservation on remove_dquot_ref
Reserved space must being claimed before remove_dquot_ref() for a
given inode. Filesystem is responsible for performing force blocks
allocation in case of dealloc in ->quota_off. Let's add sanity check
for that case. Do it similar to add_dquot_ref().

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:46 +02:00
Christian Dietrich
ff388f270d sound/oss: Remove dead CONFIG_SOFTOSS*
CONFIG_SOFTOSS* doesn't exist in Kconfig or somewhere
else, therefore removing all references for it from the source code.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-21 15:02:46 +02:00
Takashi Iwai
49e7042799 Merge branch 'for-2.6.36' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc 2010-07-21 15:01:07 +02:00
Patrick McHardy
418c527873 pcmcia: fix 'driver ... did not release config properly' warning
Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-21 13:52:36 +02:00
Peter Ujfalusi
01ea6ba2bc ASoC: TWL4030: Add configurable delay after digimic enable
When digital microphones are connected to twl, delay is
needed after enabling the digimic interface of the codec.
Add new parameter for the setup data, which can be used
to pass the apropriate delay in ms after the digimic
interface has been enabled.

Without certain delay (in certain HW configuration) the
beggining of the recorded sample contains a glitch, which
is generated by the digital microphones.

Delaying the micbias1, 2 (which is the bias for the digimic0
or 1) does not help, since the glitch is coming after
switching the digimic interface.

Reversing the micbias and digimic enable order does not
work either (in that case the wait need to be added after
the micbias enabled).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-21 11:57:58 +01:00
Takuya Yoshikawa
f4d0143951 Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
The last 't' of 'fault' is missing in the description of FAIL_IO_TIMEOUT.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-21 10:36:50 +02:00
Russell King
52d90145fb Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2010-07-21 09:26:37 +01:00
Russell King
14764b01a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stable 2010-07-21 09:22:45 +01:00
Joonyoung Shim
0fffed27f9 Input: samsung-keypad - Add samsung keypad driver
This patch adds support for keypad driver running on Samsung cpus. This
driver is tested on GONI and Aquila board using S5PC110 cpu.

[ch.naveen@samsung.com: tested on SMDK6410, SMDKC100, and SMDKV210]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-21 00:49:06 -07:00
David S. Miller
7765b8bbee MAINTAINERS: Add trailing slash to SBUS path.
Noticed by Joe Perches.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 23:37:12 -07:00
Arnd Bergmann
a3108ca232 sbus: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.

None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.

Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 23:36:39 -07:00
Dave Chinner
567c7b0ede mm: add context argument to shrinker callback to remaining shrinkers
Add the shrinkers missed in the first conversion of the API in
commit 7f8275d0d6 ("mm: add context argument to
shrinker callback").

Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-07-21 15:33:01 +10:00
Dmitry Torokhov
1ca56e513a Input: i8042 - reset keyboard controller wehen resuming from S2R
Some laptops, such as Lenovo 3000 N100, require keyboard controller reset
in order to have touchpad operable after suspend to RAM. Even if box does
not need the reset it should be safe to do so, so instead of chasing
after misbehaving boxes and grow DMI tables, let's reset the controller
unconditionally.

Reported-and-tested-by: Jerome Lacoste <jerome.lacoste@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20 20:32:21 -07:00
Dmitry Torokhov
3fea60261e Input: twl40300-keypad - fix handling of "all ground" rows
The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c)
defines a key map for the matrix keypad keyboard. The hardware seems to
use all of the 8 rows and 8 columns of the keypad, although not all
possible locations are used.

The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys
are defined with a row and column number between 0 and 7, except

        KEY(0xff, 2, KEY_F9),
        KEY(0xff, 4, KEY_F10),
        KEY(0xff, 5, KEY_F11),

which represent keycodes that should be emitted when entire row is
connected to the ground.  since the driver handles this case as if we
had an extra column in the key matrix. Unfortunately we do not allocate
enough space and end up owerwriting some random memory.

Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20 20:29:48 -07:00
Dmitry Torokhov
c25f7b763c Input: gamecon - reference correct pad in gc_psx_command()
Otherwise we won't see any events from the gamepad.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408

Reported-and-tested-by: Eugene Yudin <eugene.yudin@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20 20:29:32 -07:00
Dmitry Torokhov
7b5d3312fb Input: gamecon - reference correct input device in NES mode
We moved input devices from 'struct gc' to individial pads (struct
gc-pad), but gc_nes_process_packet() was still trying to use old
ones and crashing.

Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20 20:29:11 -07:00
NeilBrown
c41d4ac40d md/raid5: factor out code for changing size of stripe cache.
Separate the actual 'change' code from the sysfs interface
so that it can eventually be called internally.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-21 13:28:15 +10:00
NeilBrown
00bcb4ac7e md: reduce dependence on sysfs.
We will want md devices to live as dm targets where sysfs is not
visible.  So allow md to not connect to sysfs.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-07-21 13:27:53 +10:00
Lai Jiangshan
bc289ae98b tracing: Reduce latency and remove percpu trace_seq
__print_flags() and __print_symbolic() use percpu trace_seq:

1) Its memory is allocated at compile time, it wastes memory if we don't use tracing.
2) It is percpu data and it wastes more memory for multi-cpus system.
3) It disables preemption when it executes its core routine
   "trace_seq_printf(s, "%s: ", #call);" and introduces latency.

So we move this trace_seq to struct trace_iterator.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C078350.7090106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-20 22:05:34 -04:00
Richard Kennedy
985023dee6 trace: Reorder struct ring_buffer_per_cpu to remove padding on 64bit
Reorder structure to remove 8 bytes of padding on 64 bit builds.
This shrinks the size to 128 bytes so allowing allocation from a smaller
slab & needed one fewer cache lines.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
LKML-Reference: <1269516456.2054.8.camel@localhost>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-20 21:58:44 -04:00
Li Zefan
e870e9a124 tracing: Allow to disable cmdline recording
We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.

(lmbench context switch test)
 -------------------------------------------------
 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
 ctxsw  ctxsw  ctxsw ctxsw  ctxsw   ctxsw   ctxsw
------ ------ ------ ------ ------ ------- -------
  2.19   2.3   2.21   2.56   2.13     2.54    2.07
  2.39   2.51  2.35   2.75   2.27     2.81    2.24

The overhead is 6% ~ 11%.

It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.

We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-20 21:52:33 -04:00
Mikael Pettersson
f8324e20f8 math-emu: correct test for downshifting fraction in _FP_FROM_INT()
The kernel's math-emu code contains a macro _FP_FROM_INT() which is
used to convert an integer to a raw normalized floating-point value.
It does this basically in three steps:

1. Compute the exponent from the number of leading zero bits.
2. Downshift large fractions to put the MSB in the right position
   for normalized fractions.
3. Upshift small fractions to put the MSB in the right position.

There is an boundary error in step 2, causing a fraction with its
MSB exactly one bit above the normalized MSB position to not be
downshifted.  This results in a non-normalized raw float, which when
packed becomes a massively inaccurate representation for that input.

The impact of this depends on a number of arch-specific factors,
but it is known to have broken emulation of FXTOD instructions
on UltraSPARC III, which was originally reported as GCC bug 44631
<http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44631>.

Any arch which uses math-emu to emulate conversions from integers to
same-size floats may be affected.

The fix is simple: the exponent comparison used to determine if the
fraction should be downshifted must be "<=" not "<".

I'm sending a kernel module to test this as a reply to this message.
There are also SPARC user-space test cases in the GCC bug entry.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 18:45:14 -07:00
Linus Torvalds
f4b23cc2d5 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/r600: fix possible NULL pointer derefernce
  drm/radeon/kms: add quirk for ASUS HD 3600 board
  include/linux/vgaarb.h: add missing part of include guard
  drm/nouveau: Fix crashes during fbcon init on single head cards.
  drm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch
  drm/radeon/kms: fix shared ddc harder
  drm/i915: enable low power render writes on GEN3 hardware.
  drm/i915: Define MI_ARB_STATE bits
  vmwgfx: return -EFAULT if copy_to_user fails
  fb: handle allocation failure in alloc_apertures()
  drm: radeon: check kzalloc() result
  drm/ttm: Fix build on architectures without AGP
  drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
  drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740
  drm/radeon/kms: fix legacy tv-out pal mode
2010-07-20 18:29:25 -07:00
Alex Deucher
37f9003bd3 drm/radeon/kms/atom: add crtc disable function
Disables the crts as per dpms and also disables the ppll
associated with the crtc.  This should save additional power.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-21 11:27:21 +10:00
Chris Wilson
90c1efdd12 drm: Return EBUSY if the framebuffer is unbound when flipping.
It looks like there is a race condition between unbinding a framebuffer
on a hotplug event and user space trying to flip:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915]
PGD 114724067 PUD 1145bd067 PMD 0
Oops: 0000 [#1] SMP
Pid: 10954, comm: X Not tainted 2.6.35-rc5_stable_20100714+ #1
P5Q-EM/P5Q-EM
RIP: 0010:[<ffffffffa008c7d3>]  [<ffffffffa008c7d3>]
intel_crtc_page_flip+0xc9/0x39c [i915]
RSP: 0018:ffff880114927cc8  EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88012df48320 RCX: ffff88010c945600
RDX: ffff880001a109c8 RSI: ffff88010c945840 RDI: ffff88012df48320
RBP: ffff880114927d18 R08: ffff88012df48280 R09: ffff88012df48320
R10: 0000000003c2e0b0 R11: 0000000000003246 R12: ffff88010c945840
R13: ffff88012df48000 R14: 0000000000000060 R15: ffff88012dbb8000
FS:  00007f9e6078e830(0000) GS:ffff880001a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000058 CR3: 00000001177a8000 CR4: 00000000000406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process X (pid: 10954, threadinfo ffff880114926000, task
ffff88012a4a1690)
Stack:
 ffff88010c945600 ffff880115b176c0 ffff88012db10000 0000000000000246
<0> fffffff40006101c ffff88010c945600 00000000ffffffea ffff88010c945600
<0> ffff88012df48320 ffff88011b4b6780 ffff880114927d78 ffffffffa003bd0e
Call Trace:
 [<ffffffffa003bd0e>] drm_mode_page_flip_ioctl+0x1bc/0x214 [drm]
 [<ffffffffa00311fc>] drm_ioctl+0x25e/0x35e [drm]
 [<ffffffffa003bb52>] ? drm_mode_page_flip_ioctl+0x0/0x214 [drm]
 [<ffffffff810f1c3c>] vfs_ioctl+0x2a/0x9e
 [<ffffffff810f227e>] do_vfs_ioctl+0x531/0x565
 [<ffffffff810f2307>] sys_ioctl+0x55/0x77
 [<ffffffff810e56d6>] ? sys_read+0x47/0x6f
 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Code: 45 d4 f4 ff ff ff 0f 84 e0 02 00 00 48 8b 4d b0 49 8d 9d 20 03 00 00 48
89 df 49 89 4c 24 38 49 8b 07 49 89 44 24 20 49 8b 47 20 <48> 8b 40 58 49 c7 04
24 00 00 00 00 49 c7 44 24 18 a9 a5 08 a0
RIP  [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915]
 RSP <ffff880114927cc8>
CR2: 0000000000000058

References:

  Bug 28811 - [page-flipping] GPU hang when modeset after unplugging
              another monitor (under compiz)
  https://bugs.freedesktop.org/show_bug.cgi?id=28811

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-21 11:26:07 +10:00