Scan the set of pages we're freeing and make sure they're actually
owned by the domain before freeing. This generally won't happen on a
domU (since Xen gives us contigious memory), but it could happen if
there are some hardware mappings passed through.
We only bother going up to the highest page Xen actually claimed to
give us, since there's definitely nothing of ours above that.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Scan an e820 table and release any memory which lies between e820 entries,
as it won't be used and would just be wasted. At present this is just to
release any memory beyond the end of the e820 map, but it will also deal
with holes being punched in the map.
Derived from patch by Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Adding myself as the official maintainer of the Chelsio T4 Virtual function
Driver (cxgb4vf).
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix bug in setup_sge_queues() where we were incorrectly only allocating a
single "Queue Set" for MSI mode.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix off-by-one error in checking for the end of the mailbox response delay
array. We ended up walking off the end and, if we were unlucky, we'd end up
pulling in a 0 and never terminate the mailbox response delay loop ...
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having both IO-mapping.txt and io-mapping.txt in Documentation/
was confusing and/or bothersome to some people, so rename
IO-mapping.txt to bus-virt-phys-mapping.txt. Also update
Documentation/00-INDEX for both of these files.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kees Bakker <kees.bakker@xs4all.nl>
Cc: Keith Packard <keithp@keithp.com>
This reverts commit ed9eac5b49. As
reported by Bastien Nocera, the device actually uses a completely
different protocol, so simply adding VID/PID doesn't work and
completely new driver will need to be written.
Reported-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MACH_U300_BS26 doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
All cpumasks are assumed to have cpu 0 permanently set on UP, so it
can't be used to signify whether there's something to be done for the
CPU. workqueue was using cpumask to track which CPU requested rescuer
assistance and this led rescuer thread to think there always are
pending mayday requests on UP, which resulted in infinite busy loops.
This patch fixes the problem by introducing mayday_mask_t and
associated helpers which wrap cpumask on SMP and emulates its behavior
using bitops and unsigned long on UP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
The 'source' builtin is a bash alias to the '.' (dot) builtin. While the
former is supported only by bash, the latter is specified in POSIX and
works fine with all POSIX-compliant shells I am aware of.
The '$_' special parameter is specific to bash. It is partially
supported in dash too but it always evaluates to the current script path
(which causes the script to enter a loop recursively re-executing
itself). This is why I have replaced the two occurences of '$_' with the
explicit parameter.
The 'local' builtin is another example of bash-specific code. Although
it is supported by all POSIX-compliant shells I am aware of, it is not
part of POSIX specification and thus the code should not rely on it
assigning a specific value to the local variable. Moreover, the 'posh'
shell has a limited version of 'local' builtin not supporting direct
variable assignments. Thus, I have broken one of the 'local'
declarations down into a (non-POSIX) 'local' declaration and a plain
(POSIX-compliant) variable assignment.
Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The default for llseek will change to no_llseek,
so the tracing debugfs files need to add explicit
.llseek assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1278538820-1392-10-git-send-email-arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
AIF1ADC TDM mode has no effect other than causing the ADCDAT line to
be tristated rather than driven low on clock cycles where there is no
data to be transmitted. If the clock cycle is idle then there should
be no devices using the data so tristating should have no adverse
effects.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Commit f3421797 (workqueue: implement unbound workqueue) incorrectly
tested CONFIG_SMP as part of a C expression in alloc/free_cwqs(). As
CONFIG_SMP is not defined in UP, this breaks build. Fix it by using
Found during linux-next build test.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Currently the EDMA queue to be used by for servicing ASP through
internal RAM is fixed to EDMAQ_0 and that to service internal RAM
from external RAM is fixed to EDMAQ_1.
This may not be the desirable configuration on all platforms. For
example, on DM365, queue 0 has large fifo size and is more suitable
for video transfers. Having audio and video transfers on the same
queue may lead to starvation on audio side.
platform data as defined currently passes a queue number to the driver
but that remains unused inside the driver.
Fix this by defining one queue each for ASP and RAM transfers in the
platform data and using it inside the driver.
Since EDMAQ_0 maps to 0, thats the queue that will be used if
the asp queue number is not initialized. None of the platforms
currently utilize ping-pong transfers through internal RAM so that
functionality remains unchanged too.
This patch has been tested on DM644x and OMAP-L138 EVMs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch modify I2Sv2 driver to support Samsung SoC(S5PV210).
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Otherwise all machine drivers need to do so.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
slab has a "once every 2 second" timer for its housekeeping.
As the number of logical processors is growing, its more and more
common that this 2 second timer becomes the primary wakeup source.
This patch turns this housekeeping timer into a deferable timer,
which means that the timer does not interrupt idle, but just runs
at the next event that wakes the cpu up.
The impact is that the timer likely runs a bit later, but during the
delay no code is running so there's not all that much reason for
a difference in housekeeping to occur because of this delay.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
The new netpoll code in bridging contains use-after-free bugs
that are non-trivial to fix.
This patch fixes this by removing the code that uses skbs after
they're freed.
As a consequence, this means that we can no longer call bridge
from the netpoll path, so this patch also removes the controller
function in order to disable netpoll.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
Signed-off-by: David S. Miller <davem@davemloft.net>
A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.
one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560
along with numerous distro bugzillas.
This only took a week of digging and hair ripping to figure out.
Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.
After this patch no hangs were observed.
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.
Signed-off-by: Keith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code. This gets copied to user
space.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the kzalloc() fails we should return NULL. All the places that call
alloc_apertures() check for this already.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Acked-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP. The use
of the functions declared in it is already conditional.
Reported-by: Geert Stappers <stappers@stappers.nl>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Geert Stappers <stappers@stappers.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Even with jumbograms I cannot see any way in which we would need
to records a larger than 65535 valued next-header offset.
The maximum extension header length is (256 << 3) == 2048.
There are only a handful of extension headers specified which
we'd even accept (say 5 or 6), therefore the largest next-header
offset we'd ever have to contend with is something less than
say 16k.
Therefore make it a u16 instead of a u32.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reporting this will allow GUI config apps to correctly scale
width sensitive config values (such as palm detect) to correct
range. Current user apps are detecting kernels min/max=0/0 and
making an assumption that it means 0/16 or 0/15.
Synaptics touchpad interface guides show 4/15 are correct values
but driver forces to 0 when no fingers on touchpad.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Synaptics devices report fixed value of 5 for finger/palm widths
on devices that do not support capability and driver further
hardcodes to 5. Stop reporting this fixed value when its not
supported since its not useful.
This will aid applications so they can better auto-enable support
for multi-touch emulation and palm detection logic using finger
width only for devices that support width detection.
I can find no applications that currently require existence on
ABS_TOOL_WIDTH. Since only synaptics and bcm input devices
currently support this tool, it seems they must handle it
gracefully.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The name of platfrom device was changed and we need to make driver's
name match in order for it to bind to the device.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up
i8042 and breaking the touchpad. Add this model to i8042_dmi_noloop_table[]
to resolve.
BugLink: https://bugs.launchpad.net/bugs/580664
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
smp_mb() inside bnx2_tx_avail() is used twice in the normal
bnx2_start_xmit() path (see illustration below). The full memory
barrier is only necessary during race conditions with tx completion.
We can speed up the tx path by replacing smp_mb() in bnx2_tx_avail()
with a compiler barrier. The compiler barrier is to force the
compiler to fetch the tx_prod and tx_cons from memory.
In the race condition between bnx2_start_xmit() and bnx2_tx_int(),
we have the following situation:
bnx2_start_xmit() bnx2_tx_int()
if (!bnx2_tx_avail())
BUG();
...
if (!bnx2_tx_avail())
netif_tx_stop_queue(); update_tx_index();
smp_mb(); smp_mb();
if (bnx2_tx_avail()) if (netif_tx_queue_stopped() &&
netif_tx_wake_queue(); bnx2_tx_avail())
With smp_mb() removed from bnx2_tx_avail(), we need to add smp_mb() to
bnx2_start_xmit() as shown above to properly order netif_tx_stop_queue()
and bnx2_tx_avail() to check the ring index. If it is not strictly
ordered, the tx queue can be stopped forever.
This improves performance by about 5% with 2 ports running bi-directional
64-byte packets.
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on original patch by Breno Leitão <leitao@linux.vnet.ibm.com>.
Allocate the actual number of vectors and make use of fewer vectors
if pci_enable_msix() returns > 0. We must allocate one additional
vector for the cnic driver.
Cc: Breno Leitão <leitao@linux.vnet.ibm.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>